linux_dsm_epyc7002/drivers/net/wireless/iwlwifi/iwl-8000.c
Liad Kaufman f53bf4c758 iwlwifi: mvm: add fw runtime stack to dump data
The allocation of the DCCM between the data and the stack
can theoretically change without notice to the driver, but
the total size is HW-fixed. Since the stack CCM (runtime
stack) has also data important to the FW - this patch allows
pulling the whole DCCM in one piece and adds it to the dump
data.

If the size isn't known - just use the data part of the
DCCM as it appears in the FW TLVs.

Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28 10:17:41 +02:00

184 lines
6.7 KiB
C

/******************************************************************************
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2014 Intel Mobile Communications GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called COPYING.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
* BSD LICENSE
*
* Copyright(c) 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2014 Intel Mobile Communications GmbH
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#include <linux/module.h>
#include <linux/stringify.h>
#include "iwl-config.h"
#include "iwl-agn-hw.h"
/* Highest firmware API version supported */
#define IWL8000_UCODE_API_MAX 10
/* Oldest version we won't warn about */
#define IWL8000_UCODE_API_OK 10
/* Lowest firmware API version supported */
#define IWL8000_UCODE_API_MIN 9
/* NVM versions */
#define IWL8000_NVM_VERSION 0x0a1d
#define IWL8000_TX_POWER_VERSION 0xffff /* meaningless */
/* DCCM offsets and lengths */
#define IWL8260_DCCM_OFFSET 0x800000
#define IWL8260_DCCM_LEN 0x18000
#define IWL8000_FW_PRE "iwlwifi-8000"
#define IWL8000_MODULE_FIRMWARE(api) \
IWL8000_FW_PRE "-" __stringify(api) ".ucode"
#define NVM_HW_SECTION_NUM_FAMILY_8000 10
#define DEFAULT_NVM_FILE_FAMILY_8000 "iwl_nvm_8000.bin"
/* Max SDIO RX aggregation size of the ADDBA request/response */
#define MAX_RX_AGG_SIZE_8260_SDIO 28
/* Max A-MPDU exponent for HT and VHT */
#define MAX_HT_AMPDU_EXPONENT_8260_SDIO IEEE80211_HT_MAX_AMPDU_32K
#define MAX_VHT_AMPDU_EXPONENT_8260_SDIO IEEE80211_VHT_MAX_AMPDU_32K
static const struct iwl_base_params iwl8000_base_params = {
.eeprom_size = OTP_LOW_IMAGE_SIZE_FAMILY_8000,
.num_of_queues = IWLAGN_NUM_QUEUES,
.pll_cfg_val = 0,
.shadow_ram_support = true,
.led_compensation = 57,
.wd_timeout = IWL_LONG_WD_TIMEOUT,
.max_event_log_size = 512,
.shadow_reg_enable = true,
.pcie_l1_allowed = true,
};
static const struct iwl_ht_params iwl8000_ht_params = {
.stbc = true,
.ldpc = true,
.ht40_bands = BIT(IEEE80211_BAND_2GHZ) | BIT(IEEE80211_BAND_5GHZ),
};
#define IWL_DEVICE_8000 \
.ucode_api_max = IWL8000_UCODE_API_MAX, \
.ucode_api_ok = IWL8000_UCODE_API_OK, \
.ucode_api_min = IWL8000_UCODE_API_MIN, \
.device_family = IWL_DEVICE_FAMILY_8000, \
.max_inst_size = IWL60_RTC_INST_SIZE, \
.max_data_size = IWL60_RTC_DATA_SIZE, \
.base_params = &iwl8000_base_params, \
.led_mode = IWL_LED_RF_STATE, \
.nvm_hw_section_num = NVM_HW_SECTION_NUM_FAMILY_8000, \
.d0i3 = true, \
.non_shared_ant = ANT_A, \
.dccm_offset = IWL8260_DCCM_OFFSET, \
.dccm_len = IWL8260_DCCM_LEN
const struct iwl_cfg iwl8260_2n_cfg = {
.name = "Intel(R) Dual Band Wireless N 8260",
.fw_name_pre = IWL8000_FW_PRE,
IWL_DEVICE_8000,
.ht_params = &iwl8000_ht_params,
.nvm_ver = IWL8000_NVM_VERSION,
.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
};
const struct iwl_cfg iwl8260_2ac_cfg = {
.name = "Intel(R) Dual Band Wireless AC 8260",
.fw_name_pre = IWL8000_FW_PRE,
IWL_DEVICE_8000,
.ht_params = &iwl8000_ht_params,
.nvm_ver = IWL8000_NVM_VERSION,
.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K,
};
const struct iwl_cfg iwl8260_2ac_sdio_cfg = {
.name = "Intel(R) Dual Band Wireless-AC 8260",
.fw_name_pre = IWL8000_FW_PRE,
IWL_DEVICE_8000,
.ht_params = &iwl8000_ht_params,
.nvm_ver = IWL8000_NVM_VERSION,
.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
.default_nvm_file = DEFAULT_NVM_FILE_FAMILY_8000,
.max_rx_agg_size = MAX_RX_AGG_SIZE_8260_SDIO,
.disable_dummy_notification = true,
.max_ht_ampdu_exponent = MAX_HT_AMPDU_EXPONENT_8260_SDIO,
.max_vht_ampdu_exponent = MAX_VHT_AMPDU_EXPONENT_8260_SDIO,
};
const struct iwl_cfg iwl4165_2ac_sdio_cfg = {
.name = "Intel(R) Dual Band Wireless-AC 4165",
.fw_name_pre = IWL8000_FW_PRE,
IWL_DEVICE_8000,
.ht_params = &iwl8000_ht_params,
.nvm_ver = IWL8000_NVM_VERSION,
.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
.default_nvm_file = DEFAULT_NVM_FILE_FAMILY_8000,
.max_rx_agg_size = MAX_RX_AGG_SIZE_8260_SDIO,
.bt_shared_single_ant = true,
.disable_dummy_notification = true,
.max_ht_ampdu_exponent = MAX_HT_AMPDU_EXPONENT_8260_SDIO,
.max_vht_ampdu_exponent = MAX_VHT_AMPDU_EXPONENT_8260_SDIO,
};
MODULE_FIRMWARE(IWL8000_MODULE_FIRMWARE(IWL8000_UCODE_API_OK));