linux_dsm_epyc7002/drivers/gpio/gpio-rcar.c
Jingoo Han e56aee1897 gpio: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16 15:24:35 +02:00

463 lines
12 KiB
C

/*
* Renesas R-Car GPIO Support
*
* Copyright (C) 2013 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
struct gpio_rcar_priv {
void __iomem *base;
spinlock_t lock;
struct gpio_rcar_config config;
struct platform_device *pdev;
struct gpio_chip gpio_chip;
struct irq_chip irq_chip;
struct irq_domain *irq_domain;
};
#define IOINTSEL 0x00
#define INOUTSEL 0x04
#define OUTDT 0x08
#define INDT 0x0c
#define INTDT 0x10
#define INTCLR 0x14
#define INTMSK 0x18
#define MSKCLR 0x1c
#define POSNEG 0x20
#define EDGLEVEL 0x24
#define FILONOFF 0x28
#define BOTHEDGE 0x4c
#define RCAR_MAX_GPIO_PER_BANK 32
static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs)
{
return ioread32(p->base + offs);
}
static inline void gpio_rcar_write(struct gpio_rcar_priv *p, int offs,
u32 value)
{
iowrite32(value, p->base + offs);
}
static void gpio_rcar_modify_bit(struct gpio_rcar_priv *p, int offs,
int bit, bool value)
{
u32 tmp = gpio_rcar_read(p, offs);
if (value)
tmp |= BIT(bit);
else
tmp &= ~BIT(bit);
gpio_rcar_write(p, offs, tmp);
}
static void gpio_rcar_irq_disable(struct irq_data *d)
{
struct gpio_rcar_priv *p = irq_data_get_irq_chip_data(d);
gpio_rcar_write(p, INTMSK, ~BIT(irqd_to_hwirq(d)));
}
static void gpio_rcar_irq_enable(struct irq_data *d)
{
struct gpio_rcar_priv *p = irq_data_get_irq_chip_data(d);
gpio_rcar_write(p, MSKCLR, BIT(irqd_to_hwirq(d)));
}
static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p,
unsigned int hwirq,
bool active_high_rising_edge,
bool level_trigger,
bool both)
{
unsigned long flags;
/* follow steps in the GPIO documentation for
* "Setting Edge-Sensitive Interrupt Input Mode" and
* "Setting Level-Sensitive Interrupt Input Mode"
*/
spin_lock_irqsave(&p->lock, flags);
/* Configure postive or negative logic in POSNEG */
gpio_rcar_modify_bit(p, POSNEG, hwirq, !active_high_rising_edge);
/* Configure edge or level trigger in EDGLEVEL */
gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger);
/* Select one edge or both edges in BOTHEDGE */
if (p->config.has_both_edge_trigger)
gpio_rcar_modify_bit(p, BOTHEDGE, hwirq, both);
/* Select "Interrupt Input Mode" in IOINTSEL */
gpio_rcar_modify_bit(p, IOINTSEL, hwirq, true);
/* Write INTCLR in case of edge trigger */
if (!level_trigger)
gpio_rcar_write(p, INTCLR, BIT(hwirq));
spin_unlock_irqrestore(&p->lock, flags);
}
static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type)
{
struct gpio_rcar_priv *p = irq_data_get_irq_chip_data(d);
unsigned int hwirq = irqd_to_hwirq(d);
dev_dbg(&p->pdev->dev, "sense irq = %d, type = %d\n", hwirq, type);
switch (type & IRQ_TYPE_SENSE_MASK) {
case IRQ_TYPE_LEVEL_HIGH:
gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true,
false);
break;
case IRQ_TYPE_LEVEL_LOW:
gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true,
false);
break;
case IRQ_TYPE_EDGE_RISING:
gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
false);
break;
case IRQ_TYPE_EDGE_FALLING:
gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false,
false);
break;
case IRQ_TYPE_EDGE_BOTH:
if (!p->config.has_both_edge_trigger)
return -EINVAL;
gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
true);
break;
default:
return -EINVAL;
}
return 0;
}
static irqreturn_t gpio_rcar_irq_handler(int irq, void *dev_id)
{
struct gpio_rcar_priv *p = dev_id;
u32 pending;
unsigned int offset, irqs_handled = 0;
while ((pending = gpio_rcar_read(p, INTDT))) {
offset = __ffs(pending);
gpio_rcar_write(p, INTCLR, BIT(offset));
generic_handle_irq(irq_find_mapping(p->irq_domain, offset));
irqs_handled++;
}
return irqs_handled ? IRQ_HANDLED : IRQ_NONE;
}
static inline struct gpio_rcar_priv *gpio_to_priv(struct gpio_chip *chip)
{
return container_of(chip, struct gpio_rcar_priv, gpio_chip);
}
static void gpio_rcar_config_general_input_output_mode(struct gpio_chip *chip,
unsigned int gpio,
bool output)
{
struct gpio_rcar_priv *p = gpio_to_priv(chip);
unsigned long flags;
/* follow steps in the GPIO documentation for
* "Setting General Output Mode" and
* "Setting General Input Mode"
*/
spin_lock_irqsave(&p->lock, flags);
/* Configure postive logic in POSNEG */
gpio_rcar_modify_bit(p, POSNEG, gpio, false);
/* Select "General Input/Output Mode" in IOINTSEL */
gpio_rcar_modify_bit(p, IOINTSEL, gpio, false);
/* Select Input Mode or Output Mode in INOUTSEL */
gpio_rcar_modify_bit(p, INOUTSEL, gpio, output);
spin_unlock_irqrestore(&p->lock, flags);
}
static int gpio_rcar_request(struct gpio_chip *chip, unsigned offset)
{
return pinctrl_request_gpio(chip->base + offset);
}
static void gpio_rcar_free(struct gpio_chip *chip, unsigned offset)
{
pinctrl_free_gpio(chip->base + offset);
/* Set the GPIO as an input to ensure that the next GPIO request won't
* drive the GPIO pin as an output.
*/
gpio_rcar_config_general_input_output_mode(chip, offset, false);
}
static int gpio_rcar_direction_input(struct gpio_chip *chip, unsigned offset)
{
gpio_rcar_config_general_input_output_mode(chip, offset, false);
return 0;
}
static int gpio_rcar_get(struct gpio_chip *chip, unsigned offset)
{
u32 bit = BIT(offset);
/* testing on r8a7790 shows that INDT does not show correct pin state
* when configured as output, so use OUTDT in case of output pins */
if (gpio_rcar_read(gpio_to_priv(chip), INOUTSEL) & bit)
return (int)(gpio_rcar_read(gpio_to_priv(chip), OUTDT) & bit);
else
return (int)(gpio_rcar_read(gpio_to_priv(chip), INDT) & bit);
}
static void gpio_rcar_set(struct gpio_chip *chip, unsigned offset, int value)
{
struct gpio_rcar_priv *p = gpio_to_priv(chip);
unsigned long flags;
spin_lock_irqsave(&p->lock, flags);
gpio_rcar_modify_bit(p, OUTDT, offset, value);
spin_unlock_irqrestore(&p->lock, flags);
}
static int gpio_rcar_direction_output(struct gpio_chip *chip, unsigned offset,
int value)
{
/* write GPIO value to output before selecting output mode of pin */
gpio_rcar_set(chip, offset, value);
gpio_rcar_config_general_input_output_mode(chip, offset, true);
return 0;
}
static int gpio_rcar_to_irq(struct gpio_chip *chip, unsigned offset)
{
return irq_create_mapping(gpio_to_priv(chip)->irq_domain, offset);
}
static int gpio_rcar_irq_domain_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
struct gpio_rcar_priv *p = h->host_data;
dev_dbg(&p->pdev->dev, "map hw irq = %d, virq = %d\n", (int)hw, virq);
irq_set_chip_data(virq, h->host_data);
irq_set_chip_and_handler(virq, &p->irq_chip, handle_level_irq);
set_irq_flags(virq, IRQF_VALID); /* kill me now */
return 0;
}
static struct irq_domain_ops gpio_rcar_irq_domain_ops = {
.map = gpio_rcar_irq_domain_map,
};
static void gpio_rcar_parse_pdata(struct gpio_rcar_priv *p)
{
struct gpio_rcar_config *pdata = dev_get_platdata(&p->pdev->dev);
struct device_node *np = p->pdev->dev.of_node;
struct of_phandle_args args;
int ret;
if (pdata) {
p->config = *pdata;
} else if (IS_ENABLED(CONFIG_OF) && np) {
ret = of_parse_phandle_with_args(np, "gpio-ranges",
"#gpio-range-cells", 0, &args);
p->config.number_of_pins = ret == 0 && args.args_count == 3
? args.args[2]
: RCAR_MAX_GPIO_PER_BANK;
p->config.gpio_base = -1;
}
if (p->config.number_of_pins == 0 ||
p->config.number_of_pins > RCAR_MAX_GPIO_PER_BANK) {
dev_warn(&p->pdev->dev,
"Invalid number of gpio lines %u, using %u\n",
p->config.number_of_pins, RCAR_MAX_GPIO_PER_BANK);
p->config.number_of_pins = RCAR_MAX_GPIO_PER_BANK;
}
}
static int gpio_rcar_probe(struct platform_device *pdev)
{
struct gpio_rcar_priv *p;
struct resource *io, *irq;
struct gpio_chip *gpio_chip;
struct irq_chip *irq_chip;
const char *name = dev_name(&pdev->dev);
int ret;
p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
if (!p) {
dev_err(&pdev->dev, "failed to allocate driver data\n");
ret = -ENOMEM;
goto err0;
}
p->pdev = pdev;
spin_lock_init(&p->lock);
/* Get device configuration from DT node or platform data. */
gpio_rcar_parse_pdata(p);
platform_set_drvdata(pdev, p);
io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!io || !irq) {
dev_err(&pdev->dev, "missing IRQ or IOMEM\n");
ret = -EINVAL;
goto err0;
}
p->base = devm_ioremap_nocache(&pdev->dev, io->start,
resource_size(io));
if (!p->base) {
dev_err(&pdev->dev, "failed to remap I/O memory\n");
ret = -ENXIO;
goto err0;
}
gpio_chip = &p->gpio_chip;
gpio_chip->request = gpio_rcar_request;
gpio_chip->free = gpio_rcar_free;
gpio_chip->direction_input = gpio_rcar_direction_input;
gpio_chip->get = gpio_rcar_get;
gpio_chip->direction_output = gpio_rcar_direction_output;
gpio_chip->set = gpio_rcar_set;
gpio_chip->to_irq = gpio_rcar_to_irq;
gpio_chip->label = name;
gpio_chip->dev = &pdev->dev;
gpio_chip->owner = THIS_MODULE;
gpio_chip->base = p->config.gpio_base;
gpio_chip->ngpio = p->config.number_of_pins;
irq_chip = &p->irq_chip;
irq_chip->name = name;
irq_chip->irq_mask = gpio_rcar_irq_disable;
irq_chip->irq_unmask = gpio_rcar_irq_enable;
irq_chip->irq_enable = gpio_rcar_irq_enable;
irq_chip->irq_disable = gpio_rcar_irq_disable;
irq_chip->irq_set_type = gpio_rcar_irq_set_type;
irq_chip->flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_SET_TYPE_MASKED;
p->irq_domain = irq_domain_add_simple(pdev->dev.of_node,
p->config.number_of_pins,
p->config.irq_base,
&gpio_rcar_irq_domain_ops, p);
if (!p->irq_domain) {
ret = -ENXIO;
dev_err(&pdev->dev, "cannot initialize irq domain\n");
goto err1;
}
if (devm_request_irq(&pdev->dev, irq->start,
gpio_rcar_irq_handler, IRQF_SHARED, name, p)) {
dev_err(&pdev->dev, "failed to request IRQ\n");
ret = -ENOENT;
goto err1;
}
ret = gpiochip_add(gpio_chip);
if (ret) {
dev_err(&pdev->dev, "failed to add GPIO controller\n");
goto err1;
}
dev_info(&pdev->dev, "driving %d GPIOs\n", p->config.number_of_pins);
/* warn in case of mismatch if irq base is specified */
if (p->config.irq_base) {
ret = irq_find_mapping(p->irq_domain, 0);
if (p->config.irq_base != ret)
dev_warn(&pdev->dev, "irq base mismatch (%u/%u)\n",
p->config.irq_base, ret);
}
if (p->config.pctl_name) {
ret = gpiochip_add_pin_range(gpio_chip, p->config.pctl_name, 0,
gpio_chip->base, gpio_chip->ngpio);
if (ret < 0)
dev_warn(&pdev->dev, "failed to add pin range\n");
}
return 0;
err1:
irq_domain_remove(p->irq_domain);
err0:
return ret;
}
static int gpio_rcar_remove(struct platform_device *pdev)
{
struct gpio_rcar_priv *p = platform_get_drvdata(pdev);
int ret;
ret = gpiochip_remove(&p->gpio_chip);
if (ret)
return ret;
irq_domain_remove(p->irq_domain);
return 0;
}
#ifdef CONFIG_OF
static const struct of_device_id gpio_rcar_of_table[] = {
{
.compatible = "renesas,gpio-rcar",
},
{ },
};
MODULE_DEVICE_TABLE(of, gpio_rcar_of_table);
#endif
static struct platform_driver gpio_rcar_device_driver = {
.probe = gpio_rcar_probe,
.remove = gpio_rcar_remove,
.driver = {
.name = "gpio_rcar",
.of_match_table = of_match_ptr(gpio_rcar_of_table),
}
};
module_platform_driver(gpio_rcar_device_driver);
MODULE_AUTHOR("Magnus Damm");
MODULE_DESCRIPTION("Renesas R-Car GPIO Driver");
MODULE_LICENSE("GPL v2");