mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-16 06:36:46 +07:00
04d8a0a5f3
LED Mode: Microsemi PHY support 2 LEDs (LED[0] and LED[1]) to display different status information that can be selected by setting LED mode. LED Mode parameter (vsc8531, led-0-mode) and (vsc8531, led-1-mode) get from Device Tree. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
763 lines
19 KiB
C
763 lines
19 KiB
C
/*
|
|
* Driver for Microsemi VSC85xx PHYs
|
|
*
|
|
* Author: Nagaraju Lakkaraju
|
|
* License: Dual MIT/GPL
|
|
* Copyright (c) 2016 Microsemi Corporation
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mdio.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/of.h>
|
|
#include <linux/netdevice.h>
|
|
#include <dt-bindings/net/mscc-phy-vsc8531.h>
|
|
|
|
enum rgmii_rx_clock_delay {
|
|
RGMII_RX_CLK_DELAY_0_2_NS = 0,
|
|
RGMII_RX_CLK_DELAY_0_8_NS = 1,
|
|
RGMII_RX_CLK_DELAY_1_1_NS = 2,
|
|
RGMII_RX_CLK_DELAY_1_7_NS = 3,
|
|
RGMII_RX_CLK_DELAY_2_0_NS = 4,
|
|
RGMII_RX_CLK_DELAY_2_3_NS = 5,
|
|
RGMII_RX_CLK_DELAY_2_6_NS = 6,
|
|
RGMII_RX_CLK_DELAY_3_4_NS = 7
|
|
};
|
|
|
|
/* Microsemi VSC85xx PHY registers */
|
|
/* IEEE 802. Std Registers */
|
|
#define MSCC_PHY_BYPASS_CONTROL 18
|
|
#define DISABLE_HP_AUTO_MDIX_MASK 0x0080
|
|
#define DISABLE_PAIR_SWAP_CORR_MASK 0x0020
|
|
#define DISABLE_POLARITY_CORR_MASK 0x0010
|
|
|
|
#define MSCC_PHY_EXT_PHY_CNTL_1 23
|
|
#define MAC_IF_SELECTION_MASK 0x1800
|
|
#define MAC_IF_SELECTION_GMII 0
|
|
#define MAC_IF_SELECTION_RMII 1
|
|
#define MAC_IF_SELECTION_RGMII 2
|
|
#define MAC_IF_SELECTION_POS 11
|
|
#define FAR_END_LOOPBACK_MODE_MASK 0x0008
|
|
|
|
#define MII_VSC85XX_INT_MASK 25
|
|
#define MII_VSC85XX_INT_MASK_MASK 0xa000
|
|
#define MII_VSC85XX_INT_MASK_WOL 0x0040
|
|
#define MII_VSC85XX_INT_STATUS 26
|
|
|
|
#define MSCC_PHY_WOL_MAC_CONTROL 27
|
|
#define EDGE_RATE_CNTL_POS 5
|
|
#define EDGE_RATE_CNTL_MASK 0x00E0
|
|
|
|
#define MSCC_PHY_DEV_AUX_CNTL 28
|
|
#define HP_AUTO_MDIX_X_OVER_IND_MASK 0x2000
|
|
|
|
#define MSCC_PHY_LED_MODE_SEL 29
|
|
#define LED_1_MODE_SEL_MASK 0x00F0
|
|
#define LED_0_MODE_SEL_MASK 0x000F
|
|
#define LED_1_MODE_SEL_POS 4
|
|
|
|
#define MSCC_EXT_PAGE_ACCESS 31
|
|
#define MSCC_PHY_PAGE_STANDARD 0x0000 /* Standard registers */
|
|
#define MSCC_PHY_PAGE_EXTENDED 0x0001 /* Extended registers */
|
|
#define MSCC_PHY_PAGE_EXTENDED_2 0x0002 /* Extended reg - page 2 */
|
|
|
|
/* Extended Page 1 Registers */
|
|
#define MSCC_PHY_EXT_MODE_CNTL 19
|
|
#define FORCE_MDI_CROSSOVER_MASK 0x000C
|
|
#define FORCE_MDI_CROSSOVER_MDIX 0x000C
|
|
#define FORCE_MDI_CROSSOVER_MDI 0x0008
|
|
|
|
#define MSCC_PHY_ACTIPHY_CNTL 20
|
|
#define DOWNSHIFT_CNTL_MASK 0x001C
|
|
#define DOWNSHIFT_EN 0x0010
|
|
#define DOWNSHIFT_CNTL_POS 2
|
|
|
|
/* Extended Page 2 Registers */
|
|
#define MSCC_PHY_RGMII_CNTL 20
|
|
#define RGMII_RX_CLK_DELAY_MASK 0x0070
|
|
#define RGMII_RX_CLK_DELAY_POS 4
|
|
|
|
#define MSCC_PHY_WOL_LOWER_MAC_ADDR 21
|
|
#define MSCC_PHY_WOL_MID_MAC_ADDR 22
|
|
#define MSCC_PHY_WOL_UPPER_MAC_ADDR 23
|
|
#define MSCC_PHY_WOL_LOWER_PASSWD 24
|
|
#define MSCC_PHY_WOL_MID_PASSWD 25
|
|
#define MSCC_PHY_WOL_UPPER_PASSWD 26
|
|
|
|
#define MSCC_PHY_WOL_MAC_CONTROL 27
|
|
#define SECURE_ON_ENABLE 0x8000
|
|
#define SECURE_ON_PASSWD_LEN_4 0x4000
|
|
|
|
/* Microsemi PHY ID's */
|
|
#define PHY_ID_VSC8530 0x00070560
|
|
#define PHY_ID_VSC8531 0x00070570
|
|
#define PHY_ID_VSC8540 0x00070760
|
|
#define PHY_ID_VSC8541 0x00070770
|
|
|
|
#define MSCC_VDDMAC_1500 1500
|
|
#define MSCC_VDDMAC_1800 1800
|
|
#define MSCC_VDDMAC_2500 2500
|
|
#define MSCC_VDDMAC_3300 3300
|
|
|
|
#define DOWNSHIFT_COUNT_MAX 5
|
|
|
|
struct vsc8531_private {
|
|
int rate_magic;
|
|
u8 led_0_mode;
|
|
u8 led_1_mode;
|
|
};
|
|
|
|
#ifdef CONFIG_OF_MDIO
|
|
struct vsc8531_edge_rate_table {
|
|
u16 vddmac;
|
|
u8 slowdown[8];
|
|
};
|
|
|
|
static const struct vsc8531_edge_rate_table edge_table[] = {
|
|
{MSCC_VDDMAC_3300, { 0, 2, 4, 7, 10, 17, 29, 53} },
|
|
{MSCC_VDDMAC_2500, { 0, 3, 6, 10, 14, 23, 37, 63} },
|
|
{MSCC_VDDMAC_1800, { 0, 5, 9, 16, 23, 35, 52, 76} },
|
|
{MSCC_VDDMAC_1500, { 0, 6, 14, 21, 29, 42, 58, 77} },
|
|
};
|
|
#endif /* CONFIG_OF_MDIO */
|
|
|
|
static int vsc85xx_phy_page_set(struct phy_device *phydev, u8 page)
|
|
{
|
|
int rc;
|
|
|
|
rc = phy_write(phydev, MSCC_EXT_PAGE_ACCESS, page);
|
|
return rc;
|
|
}
|
|
|
|
static int vsc85xx_led_cntl_set(struct phy_device *phydev,
|
|
u8 led_num,
|
|
u8 mode)
|
|
{
|
|
int rc;
|
|
u16 reg_val;
|
|
|
|
mutex_lock(&phydev->lock);
|
|
reg_val = phy_read(phydev, MSCC_PHY_LED_MODE_SEL);
|
|
if (led_num) {
|
|
reg_val &= ~LED_1_MODE_SEL_MASK;
|
|
reg_val |= (((u16)mode << LED_1_MODE_SEL_POS) &
|
|
LED_1_MODE_SEL_MASK);
|
|
} else {
|
|
reg_val &= ~LED_0_MODE_SEL_MASK;
|
|
reg_val |= ((u16)mode & LED_0_MODE_SEL_MASK);
|
|
}
|
|
rc = phy_write(phydev, MSCC_PHY_LED_MODE_SEL, reg_val);
|
|
mutex_unlock(&phydev->lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int vsc85xx_mdix_get(struct phy_device *phydev, u8 *mdix)
|
|
{
|
|
u16 reg_val;
|
|
|
|
reg_val = phy_read(phydev, MSCC_PHY_DEV_AUX_CNTL);
|
|
if (reg_val & HP_AUTO_MDIX_X_OVER_IND_MASK)
|
|
*mdix = ETH_TP_MDI_X;
|
|
else
|
|
*mdix = ETH_TP_MDI;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vsc85xx_mdix_set(struct phy_device *phydev, u8 mdix)
|
|
{
|
|
int rc;
|
|
u16 reg_val;
|
|
|
|
reg_val = phy_read(phydev, MSCC_PHY_BYPASS_CONTROL);
|
|
if ((mdix == ETH_TP_MDI) || (mdix == ETH_TP_MDI_X)) {
|
|
reg_val |= (DISABLE_PAIR_SWAP_CORR_MASK |
|
|
DISABLE_POLARITY_CORR_MASK |
|
|
DISABLE_HP_AUTO_MDIX_MASK);
|
|
} else {
|
|
reg_val &= ~(DISABLE_PAIR_SWAP_CORR_MASK |
|
|
DISABLE_POLARITY_CORR_MASK |
|
|
DISABLE_HP_AUTO_MDIX_MASK);
|
|
}
|
|
rc = phy_write(phydev, MSCC_PHY_BYPASS_CONTROL, reg_val);
|
|
if (rc != 0)
|
|
return rc;
|
|
|
|
rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_EXTENDED);
|
|
if (rc != 0)
|
|
return rc;
|
|
|
|
reg_val = phy_read(phydev, MSCC_PHY_EXT_MODE_CNTL);
|
|
reg_val &= ~(FORCE_MDI_CROSSOVER_MASK);
|
|
if (mdix == ETH_TP_MDI)
|
|
reg_val |= FORCE_MDI_CROSSOVER_MDI;
|
|
else if (mdix == ETH_TP_MDI_X)
|
|
reg_val |= FORCE_MDI_CROSSOVER_MDIX;
|
|
rc = phy_write(phydev, MSCC_PHY_EXT_MODE_CNTL, reg_val);
|
|
if (rc != 0)
|
|
return rc;
|
|
|
|
rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_STANDARD);
|
|
if (rc != 0)
|
|
return rc;
|
|
|
|
return genphy_restart_aneg(phydev);
|
|
}
|
|
|
|
static int vsc85xx_downshift_get(struct phy_device *phydev, u8 *count)
|
|
{
|
|
int rc;
|
|
u16 reg_val;
|
|
|
|
rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_EXTENDED);
|
|
if (rc != 0)
|
|
goto out;
|
|
|
|
reg_val = phy_read(phydev, MSCC_PHY_ACTIPHY_CNTL);
|
|
reg_val &= DOWNSHIFT_CNTL_MASK;
|
|
if (!(reg_val & DOWNSHIFT_EN))
|
|
*count = DOWNSHIFT_DEV_DISABLE;
|
|
else
|
|
*count = ((reg_val & ~DOWNSHIFT_EN) >> DOWNSHIFT_CNTL_POS) + 2;
|
|
rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_STANDARD);
|
|
|
|
out:
|
|
return rc;
|
|
}
|
|
|
|
static int vsc85xx_downshift_set(struct phy_device *phydev, u8 count)
|
|
{
|
|
int rc;
|
|
u16 reg_val;
|
|
|
|
if (count == DOWNSHIFT_DEV_DEFAULT_COUNT) {
|
|
/* Default downshift count 3 (i.e. Bit3:2 = 0b01) */
|
|
count = ((1 << DOWNSHIFT_CNTL_POS) | DOWNSHIFT_EN);
|
|
} else if (count > DOWNSHIFT_COUNT_MAX || count == 1) {
|
|
phydev_err(phydev, "Downshift count should be 2,3,4 or 5\n");
|
|
return -ERANGE;
|
|
} else if (count) {
|
|
/* Downshift count is either 2,3,4 or 5 */
|
|
count = (((count - 2) << DOWNSHIFT_CNTL_POS) | DOWNSHIFT_EN);
|
|
}
|
|
|
|
rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_EXTENDED);
|
|
if (rc != 0)
|
|
goto out;
|
|
|
|
reg_val = phy_read(phydev, MSCC_PHY_ACTIPHY_CNTL);
|
|
reg_val &= ~(DOWNSHIFT_CNTL_MASK);
|
|
reg_val |= count;
|
|
rc = phy_write(phydev, MSCC_PHY_ACTIPHY_CNTL, reg_val);
|
|
if (rc != 0)
|
|
goto out;
|
|
|
|
rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_STANDARD);
|
|
|
|
out:
|
|
return rc;
|
|
}
|
|
|
|
static int vsc85xx_wol_set(struct phy_device *phydev,
|
|
struct ethtool_wolinfo *wol)
|
|
{
|
|
int rc;
|
|
u16 reg_val;
|
|
u8 i;
|
|
u16 pwd[3] = {0, 0, 0};
|
|
struct ethtool_wolinfo *wol_conf = wol;
|
|
u8 *mac_addr = phydev->attached_dev->dev_addr;
|
|
|
|
mutex_lock(&phydev->lock);
|
|
rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_EXTENDED_2);
|
|
if (rc != 0)
|
|
goto out_unlock;
|
|
|
|
if (wol->wolopts & WAKE_MAGIC) {
|
|
/* Store the device address for the magic packet */
|
|
for (i = 0; i < ARRAY_SIZE(pwd); i++)
|
|
pwd[i] = mac_addr[5 - (i * 2 + 1)] << 8 |
|
|
mac_addr[5 - i * 2];
|
|
phy_write(phydev, MSCC_PHY_WOL_LOWER_MAC_ADDR, pwd[0]);
|
|
phy_write(phydev, MSCC_PHY_WOL_MID_MAC_ADDR, pwd[1]);
|
|
phy_write(phydev, MSCC_PHY_WOL_UPPER_MAC_ADDR, pwd[2]);
|
|
} else {
|
|
phy_write(phydev, MSCC_PHY_WOL_LOWER_MAC_ADDR, 0);
|
|
phy_write(phydev, MSCC_PHY_WOL_MID_MAC_ADDR, 0);
|
|
phy_write(phydev, MSCC_PHY_WOL_UPPER_MAC_ADDR, 0);
|
|
}
|
|
|
|
if (wol_conf->wolopts & WAKE_MAGICSECURE) {
|
|
for (i = 0; i < ARRAY_SIZE(pwd); i++)
|
|
pwd[i] = wol_conf->sopass[5 - (i * 2 + 1)] << 8 |
|
|
wol_conf->sopass[5 - i * 2];
|
|
phy_write(phydev, MSCC_PHY_WOL_LOWER_PASSWD, pwd[0]);
|
|
phy_write(phydev, MSCC_PHY_WOL_MID_PASSWD, pwd[1]);
|
|
phy_write(phydev, MSCC_PHY_WOL_UPPER_PASSWD, pwd[2]);
|
|
} else {
|
|
phy_write(phydev, MSCC_PHY_WOL_LOWER_PASSWD, 0);
|
|
phy_write(phydev, MSCC_PHY_WOL_MID_PASSWD, 0);
|
|
phy_write(phydev, MSCC_PHY_WOL_UPPER_PASSWD, 0);
|
|
}
|
|
|
|
reg_val = phy_read(phydev, MSCC_PHY_WOL_MAC_CONTROL);
|
|
if (wol_conf->wolopts & WAKE_MAGICSECURE)
|
|
reg_val |= SECURE_ON_ENABLE;
|
|
else
|
|
reg_val &= ~SECURE_ON_ENABLE;
|
|
phy_write(phydev, MSCC_PHY_WOL_MAC_CONTROL, reg_val);
|
|
|
|
rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_STANDARD);
|
|
if (rc != 0)
|
|
goto out_unlock;
|
|
|
|
if (wol->wolopts & WAKE_MAGIC) {
|
|
/* Enable the WOL interrupt */
|
|
reg_val = phy_read(phydev, MII_VSC85XX_INT_MASK);
|
|
reg_val |= MII_VSC85XX_INT_MASK_WOL;
|
|
rc = phy_write(phydev, MII_VSC85XX_INT_MASK, reg_val);
|
|
if (rc != 0)
|
|
goto out_unlock;
|
|
} else {
|
|
/* Disable the WOL interrupt */
|
|
reg_val = phy_read(phydev, MII_VSC85XX_INT_MASK);
|
|
reg_val &= (~MII_VSC85XX_INT_MASK_WOL);
|
|
rc = phy_write(phydev, MII_VSC85XX_INT_MASK, reg_val);
|
|
if (rc != 0)
|
|
goto out_unlock;
|
|
}
|
|
/* Clear WOL iterrupt status */
|
|
reg_val = phy_read(phydev, MII_VSC85XX_INT_STATUS);
|
|
|
|
out_unlock:
|
|
mutex_unlock(&phydev->lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void vsc85xx_wol_get(struct phy_device *phydev,
|
|
struct ethtool_wolinfo *wol)
|
|
{
|
|
int rc;
|
|
u16 reg_val;
|
|
u8 i;
|
|
u16 pwd[3] = {0, 0, 0};
|
|
struct ethtool_wolinfo *wol_conf = wol;
|
|
|
|
mutex_lock(&phydev->lock);
|
|
rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_EXTENDED_2);
|
|
if (rc != 0)
|
|
goto out_unlock;
|
|
|
|
reg_val = phy_read(phydev, MSCC_PHY_WOL_MAC_CONTROL);
|
|
if (reg_val & SECURE_ON_ENABLE)
|
|
wol_conf->wolopts |= WAKE_MAGICSECURE;
|
|
if (wol_conf->wolopts & WAKE_MAGICSECURE) {
|
|
pwd[0] = phy_read(phydev, MSCC_PHY_WOL_LOWER_PASSWD);
|
|
pwd[1] = phy_read(phydev, MSCC_PHY_WOL_MID_PASSWD);
|
|
pwd[2] = phy_read(phydev, MSCC_PHY_WOL_UPPER_PASSWD);
|
|
for (i = 0; i < ARRAY_SIZE(pwd); i++) {
|
|
wol_conf->sopass[5 - i * 2] = pwd[i] & 0x00ff;
|
|
wol_conf->sopass[5 - (i * 2 + 1)] = (pwd[i] & 0xff00)
|
|
>> 8;
|
|
}
|
|
}
|
|
|
|
rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_STANDARD);
|
|
|
|
out_unlock:
|
|
mutex_unlock(&phydev->lock);
|
|
}
|
|
|
|
#ifdef CONFIG_OF_MDIO
|
|
static int vsc85xx_edge_rate_magic_get(struct phy_device *phydev)
|
|
{
|
|
u8 sd;
|
|
u16 vdd;
|
|
int rc, i, j;
|
|
struct device *dev = &phydev->mdio.dev;
|
|
struct device_node *of_node = dev->of_node;
|
|
u8 sd_array_size = ARRAY_SIZE(edge_table[0].slowdown);
|
|
|
|
if (!of_node)
|
|
return -ENODEV;
|
|
|
|
rc = of_property_read_u16(of_node, "vsc8531,vddmac", &vdd);
|
|
if (rc != 0)
|
|
vdd = MSCC_VDDMAC_3300;
|
|
|
|
rc = of_property_read_u8(of_node, "vsc8531,edge-slowdown", &sd);
|
|
if (rc != 0)
|
|
sd = 0;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(edge_table); i++)
|
|
if (edge_table[i].vddmac == vdd)
|
|
for (j = 0; j < sd_array_size; j++)
|
|
if (edge_table[i].slowdown[j] == sd)
|
|
return (sd_array_size - j - 1);
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int vsc85xx_dt_led_mode_get(struct phy_device *phydev,
|
|
char *led,
|
|
u8 default_mode)
|
|
{
|
|
struct device *dev = &phydev->mdio.dev;
|
|
struct device_node *of_node = dev->of_node;
|
|
u8 led_mode;
|
|
int err;
|
|
|
|
if (!of_node)
|
|
return -ENODEV;
|
|
|
|
led_mode = default_mode;
|
|
err = of_property_read_u8(of_node, led, &led_mode);
|
|
if (!err && (led_mode > 15 || led_mode == 7 || led_mode == 11)) {
|
|
phydev_err(phydev, "DT %s invalid\n", led);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return led_mode;
|
|
}
|
|
|
|
#else
|
|
static int vsc85xx_edge_rate_magic_get(struct phy_device *phydev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int vsc85xx_dt_led_mode_get(struct phy_device *phydev,
|
|
char *led,
|
|
u8 default_mode)
|
|
{
|
|
return default_mode;
|
|
}
|
|
#endif /* CONFIG_OF_MDIO */
|
|
|
|
static int vsc85xx_edge_rate_cntl_set(struct phy_device *phydev, u8 edge_rate)
|
|
{
|
|
int rc;
|
|
u16 reg_val;
|
|
|
|
mutex_lock(&phydev->lock);
|
|
rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_EXTENDED_2);
|
|
if (rc != 0)
|
|
goto out_unlock;
|
|
reg_val = phy_read(phydev, MSCC_PHY_WOL_MAC_CONTROL);
|
|
reg_val &= ~(EDGE_RATE_CNTL_MASK);
|
|
reg_val |= (edge_rate << EDGE_RATE_CNTL_POS);
|
|
rc = phy_write(phydev, MSCC_PHY_WOL_MAC_CONTROL, reg_val);
|
|
if (rc != 0)
|
|
goto out_unlock;
|
|
rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_STANDARD);
|
|
|
|
out_unlock:
|
|
mutex_unlock(&phydev->lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int vsc85xx_mac_if_set(struct phy_device *phydev,
|
|
phy_interface_t interface)
|
|
{
|
|
int rc;
|
|
u16 reg_val;
|
|
|
|
mutex_lock(&phydev->lock);
|
|
reg_val = phy_read(phydev, MSCC_PHY_EXT_PHY_CNTL_1);
|
|
reg_val &= ~(MAC_IF_SELECTION_MASK);
|
|
switch (interface) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
reg_val |= (MAC_IF_SELECTION_RGMII << MAC_IF_SELECTION_POS);
|
|
break;
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
reg_val |= (MAC_IF_SELECTION_RMII << MAC_IF_SELECTION_POS);
|
|
break;
|
|
case PHY_INTERFACE_MODE_MII:
|
|
case PHY_INTERFACE_MODE_GMII:
|
|
reg_val |= (MAC_IF_SELECTION_GMII << MAC_IF_SELECTION_POS);
|
|
break;
|
|
default:
|
|
rc = -EINVAL;
|
|
goto out_unlock;
|
|
}
|
|
rc = phy_write(phydev, MSCC_PHY_EXT_PHY_CNTL_1, reg_val);
|
|
if (rc != 0)
|
|
goto out_unlock;
|
|
|
|
rc = genphy_soft_reset(phydev);
|
|
|
|
out_unlock:
|
|
mutex_unlock(&phydev->lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int vsc85xx_default_config(struct phy_device *phydev)
|
|
{
|
|
int rc;
|
|
u16 reg_val;
|
|
|
|
phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
|
|
mutex_lock(&phydev->lock);
|
|
rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_EXTENDED_2);
|
|
if (rc != 0)
|
|
goto out_unlock;
|
|
|
|
reg_val = phy_read(phydev, MSCC_PHY_RGMII_CNTL);
|
|
reg_val &= ~(RGMII_RX_CLK_DELAY_MASK);
|
|
reg_val |= (RGMII_RX_CLK_DELAY_1_1_NS << RGMII_RX_CLK_DELAY_POS);
|
|
phy_write(phydev, MSCC_PHY_RGMII_CNTL, reg_val);
|
|
rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_STANDARD);
|
|
|
|
out_unlock:
|
|
mutex_unlock(&phydev->lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int vsc85xx_get_tunable(struct phy_device *phydev,
|
|
struct ethtool_tunable *tuna, void *data)
|
|
{
|
|
switch (tuna->id) {
|
|
case ETHTOOL_PHY_DOWNSHIFT:
|
|
return vsc85xx_downshift_get(phydev, (u8 *)data);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int vsc85xx_set_tunable(struct phy_device *phydev,
|
|
struct ethtool_tunable *tuna,
|
|
const void *data)
|
|
{
|
|
switch (tuna->id) {
|
|
case ETHTOOL_PHY_DOWNSHIFT:
|
|
return vsc85xx_downshift_set(phydev, *(u8 *)data);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int vsc85xx_config_init(struct phy_device *phydev)
|
|
{
|
|
int rc;
|
|
struct vsc8531_private *vsc8531 = phydev->priv;
|
|
|
|
rc = vsc85xx_default_config(phydev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = vsc85xx_mac_if_set(phydev, phydev->interface);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = vsc85xx_edge_rate_cntl_set(phydev, vsc8531->rate_magic);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = vsc85xx_led_cntl_set(phydev, 1, vsc8531->led_1_mode);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = vsc85xx_led_cntl_set(phydev, 0, vsc8531->led_0_mode);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = genphy_config_init(phydev);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int vsc85xx_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int rc = 0;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
|
|
rc = phy_read(phydev, MII_VSC85XX_INT_STATUS);
|
|
|
|
return (rc < 0) ? rc : 0;
|
|
}
|
|
|
|
static int vsc85xx_config_intr(struct phy_device *phydev)
|
|
{
|
|
int rc;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
|
|
rc = phy_write(phydev, MII_VSC85XX_INT_MASK,
|
|
MII_VSC85XX_INT_MASK_MASK);
|
|
} else {
|
|
rc = phy_write(phydev, MII_VSC85XX_INT_MASK, 0);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = phy_read(phydev, MII_VSC85XX_INT_STATUS);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int vsc85xx_config_aneg(struct phy_device *phydev)
|
|
{
|
|
int rc;
|
|
|
|
rc = vsc85xx_mdix_set(phydev, phydev->mdix_ctrl);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
return genphy_config_aneg(phydev);
|
|
}
|
|
|
|
static int vsc85xx_read_status(struct phy_device *phydev)
|
|
{
|
|
int rc;
|
|
|
|
rc = vsc85xx_mdix_get(phydev, &phydev->mdix);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
return genphy_read_status(phydev);
|
|
}
|
|
|
|
static int vsc85xx_probe(struct phy_device *phydev)
|
|
{
|
|
struct vsc8531_private *vsc8531;
|
|
int rate_magic;
|
|
int led_mode;
|
|
|
|
rate_magic = vsc85xx_edge_rate_magic_get(phydev);
|
|
if (rate_magic < 0)
|
|
return rate_magic;
|
|
|
|
vsc8531 = devm_kzalloc(&phydev->mdio.dev, sizeof(*vsc8531), GFP_KERNEL);
|
|
if (!vsc8531)
|
|
return -ENOMEM;
|
|
|
|
phydev->priv = vsc8531;
|
|
|
|
vsc8531->rate_magic = rate_magic;
|
|
|
|
/* LED[0] and LED[1] mode */
|
|
led_mode = vsc85xx_dt_led_mode_get(phydev, "vsc8531,led-0-mode",
|
|
VSC8531_LINK_1000_ACTIVITY);
|
|
if (led_mode < 0)
|
|
return led_mode;
|
|
vsc8531->led_0_mode = led_mode;
|
|
|
|
led_mode = vsc85xx_dt_led_mode_get(phydev, "vsc8531,led-1-mode",
|
|
VSC8531_LINK_100_ACTIVITY);
|
|
if (led_mode < 0)
|
|
return led_mode;
|
|
vsc8531->led_1_mode = led_mode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Microsemi VSC85xx PHYs */
|
|
static struct phy_driver vsc85xx_driver[] = {
|
|
{
|
|
.phy_id = PHY_ID_VSC8530,
|
|
.name = "Microsemi FE VSC8530",
|
|
.phy_id_mask = 0xfffffff0,
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.soft_reset = &genphy_soft_reset,
|
|
.config_init = &vsc85xx_config_init,
|
|
.config_aneg = &vsc85xx_config_aneg,
|
|
.aneg_done = &genphy_aneg_done,
|
|
.read_status = &vsc85xx_read_status,
|
|
.ack_interrupt = &vsc85xx_ack_interrupt,
|
|
.config_intr = &vsc85xx_config_intr,
|
|
.suspend = &genphy_suspend,
|
|
.resume = &genphy_resume,
|
|
.probe = &vsc85xx_probe,
|
|
.set_wol = &vsc85xx_wol_set,
|
|
.get_wol = &vsc85xx_wol_get,
|
|
.get_tunable = &vsc85xx_get_tunable,
|
|
.set_tunable = &vsc85xx_set_tunable,
|
|
},
|
|
{
|
|
.phy_id = PHY_ID_VSC8531,
|
|
.name = "Microsemi VSC8531",
|
|
.phy_id_mask = 0xfffffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.soft_reset = &genphy_soft_reset,
|
|
.config_init = &vsc85xx_config_init,
|
|
.config_aneg = &vsc85xx_config_aneg,
|
|
.aneg_done = &genphy_aneg_done,
|
|
.read_status = &vsc85xx_read_status,
|
|
.ack_interrupt = &vsc85xx_ack_interrupt,
|
|
.config_intr = &vsc85xx_config_intr,
|
|
.suspend = &genphy_suspend,
|
|
.resume = &genphy_resume,
|
|
.probe = &vsc85xx_probe,
|
|
.set_wol = &vsc85xx_wol_set,
|
|
.get_wol = &vsc85xx_wol_get,
|
|
.get_tunable = &vsc85xx_get_tunable,
|
|
.set_tunable = &vsc85xx_set_tunable,
|
|
},
|
|
{
|
|
.phy_id = PHY_ID_VSC8540,
|
|
.name = "Microsemi FE VSC8540 SyncE",
|
|
.phy_id_mask = 0xfffffff0,
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.soft_reset = &genphy_soft_reset,
|
|
.config_init = &vsc85xx_config_init,
|
|
.config_aneg = &vsc85xx_config_aneg,
|
|
.aneg_done = &genphy_aneg_done,
|
|
.read_status = &vsc85xx_read_status,
|
|
.ack_interrupt = &vsc85xx_ack_interrupt,
|
|
.config_intr = &vsc85xx_config_intr,
|
|
.suspend = &genphy_suspend,
|
|
.resume = &genphy_resume,
|
|
.probe = &vsc85xx_probe,
|
|
.set_wol = &vsc85xx_wol_set,
|
|
.get_wol = &vsc85xx_wol_get,
|
|
.get_tunable = &vsc85xx_get_tunable,
|
|
.set_tunable = &vsc85xx_set_tunable,
|
|
},
|
|
{
|
|
.phy_id = PHY_ID_VSC8541,
|
|
.name = "Microsemi VSC8541 SyncE",
|
|
.phy_id_mask = 0xfffffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.soft_reset = &genphy_soft_reset,
|
|
.config_init = &vsc85xx_config_init,
|
|
.config_aneg = &vsc85xx_config_aneg,
|
|
.aneg_done = &genphy_aneg_done,
|
|
.read_status = &vsc85xx_read_status,
|
|
.ack_interrupt = &vsc85xx_ack_interrupt,
|
|
.config_intr = &vsc85xx_config_intr,
|
|
.suspend = &genphy_suspend,
|
|
.resume = &genphy_resume,
|
|
.probe = &vsc85xx_probe,
|
|
.set_wol = &vsc85xx_wol_set,
|
|
.get_wol = &vsc85xx_wol_get,
|
|
.get_tunable = &vsc85xx_get_tunable,
|
|
.set_tunable = &vsc85xx_set_tunable,
|
|
}
|
|
|
|
};
|
|
|
|
module_phy_driver(vsc85xx_driver);
|
|
|
|
static struct mdio_device_id __maybe_unused vsc85xx_tbl[] = {
|
|
{ PHY_ID_VSC8530, 0xfffffff0, },
|
|
{ PHY_ID_VSC8531, 0xfffffff0, },
|
|
{ PHY_ID_VSC8540, 0xfffffff0, },
|
|
{ PHY_ID_VSC8541, 0xfffffff0, },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(mdio, vsc85xx_tbl);
|
|
|
|
MODULE_DESCRIPTION("Microsemi VSC85xx PHY driver");
|
|
MODULE_AUTHOR("Nagaraju Lakkaraju");
|
|
MODULE_LICENSE("Dual MIT/GPL");
|