mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-16 03:06:58 +07:00
f4bf03d8b7
Most machine files include "devices-imxXX.h" which in turn includes <mach/devices-common.h>. The latter already includes many headers that the machine files don't need to include again. These were found by: $ grep \#include arch/arm/plat-mxc/include/mach/devices-common.h > tmpfile $ git grep -l 'devices-imx' arch/arm | xargs grep -f tmpfile -F (but I kept linux/init.h, linux/kernel.h and linux/platform_device.h) LAKML-Reference: 1298912674-15153-2-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
635 lines
15 KiB
C
635 lines
15 KiB
C
/*
|
|
* based on code from the following
|
|
* Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
* Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
|
|
* Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/input.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/spi/flash.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/mfd/mc13892.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <mach/common.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/iomux-mx51.h>
|
|
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/usb/ulpi.h>
|
|
#include <mach/ulpi.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/time.h>
|
|
|
|
#include "devices-imx51.h"
|
|
#include "devices.h"
|
|
#include "efika.h"
|
|
#include "cpu_op-mx51.h"
|
|
|
|
#define MX51_USB_CTRL_1_OFFSET 0x10
|
|
#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
|
|
#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
|
|
|
|
#define EFIKAMX_USB_HUB_RESET IMX_GPIO_NR(1, 5)
|
|
#define EFIKAMX_USBH1_STP IMX_GPIO_NR(1, 27)
|
|
|
|
#define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24)
|
|
#define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25)
|
|
|
|
#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6)
|
|
|
|
static iomux_v3_cfg_t mx51efika_pads[] = {
|
|
/* UART1 */
|
|
MX51_PAD_UART1_RXD__UART1_RXD,
|
|
MX51_PAD_UART1_TXD__UART1_TXD,
|
|
MX51_PAD_UART1_RTS__UART1_RTS,
|
|
MX51_PAD_UART1_CTS__UART1_CTS,
|
|
|
|
/* SD 1 */
|
|
MX51_PAD_SD1_CMD__SD1_CMD,
|
|
MX51_PAD_SD1_CLK__SD1_CLK,
|
|
MX51_PAD_SD1_DATA0__SD1_DATA0,
|
|
MX51_PAD_SD1_DATA1__SD1_DATA1,
|
|
MX51_PAD_SD1_DATA2__SD1_DATA2,
|
|
MX51_PAD_SD1_DATA3__SD1_DATA3,
|
|
|
|
/* SD 2 */
|
|
MX51_PAD_SD2_CMD__SD2_CMD,
|
|
MX51_PAD_SD2_CLK__SD2_CLK,
|
|
MX51_PAD_SD2_DATA0__SD2_DATA0,
|
|
MX51_PAD_SD2_DATA1__SD2_DATA1,
|
|
MX51_PAD_SD2_DATA2__SD2_DATA2,
|
|
MX51_PAD_SD2_DATA3__SD2_DATA3,
|
|
|
|
/* SD/MMC WP/CD */
|
|
MX51_PAD_GPIO1_0__SD1_CD,
|
|
MX51_PAD_GPIO1_1__SD1_WP,
|
|
MX51_PAD_GPIO1_7__SD2_WP,
|
|
MX51_PAD_GPIO1_8__SD2_CD,
|
|
|
|
/* spi */
|
|
MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
|
|
MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
|
|
MX51_PAD_CSPI1_SS0__GPIO4_24,
|
|
MX51_PAD_CSPI1_SS1__GPIO4_25,
|
|
MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
|
|
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
|
|
MX51_PAD_GPIO1_6__GPIO1_6,
|
|
|
|
/* USB HOST1 */
|
|
MX51_PAD_USBH1_CLK__USBH1_CLK,
|
|
MX51_PAD_USBH1_DIR__USBH1_DIR,
|
|
MX51_PAD_USBH1_NXT__USBH1_NXT,
|
|
MX51_PAD_USBH1_DATA0__USBH1_DATA0,
|
|
MX51_PAD_USBH1_DATA1__USBH1_DATA1,
|
|
MX51_PAD_USBH1_DATA2__USBH1_DATA2,
|
|
MX51_PAD_USBH1_DATA3__USBH1_DATA3,
|
|
MX51_PAD_USBH1_DATA4__USBH1_DATA4,
|
|
MX51_PAD_USBH1_DATA5__USBH1_DATA5,
|
|
MX51_PAD_USBH1_DATA6__USBH1_DATA6,
|
|
MX51_PAD_USBH1_DATA7__USBH1_DATA7,
|
|
|
|
/* USB HUB RESET */
|
|
MX51_PAD_GPIO1_5__GPIO1_5,
|
|
|
|
/* WLAN */
|
|
MX51_PAD_EIM_A22__GPIO2_16,
|
|
MX51_PAD_EIM_A16__GPIO2_10,
|
|
|
|
/* USB PHY RESET */
|
|
MX51_PAD_EIM_D27__GPIO2_9,
|
|
};
|
|
|
|
/* Serial ports */
|
|
static const struct imxuart_platform_data uart_pdata = {
|
|
.flags = IMXUART_HAVE_RTSCTS,
|
|
};
|
|
|
|
/* This function is board specific as the bit mask for the plldiv will also
|
|
* be different for other Freescale SoCs, thus a common bitmask is not
|
|
* possible and cannot get place in /plat-mxc/ehci.c.
|
|
*/
|
|
static int initialize_otg_port(struct platform_device *pdev)
|
|
{
|
|
u32 v;
|
|
void __iomem *usb_base;
|
|
void __iomem *usbother_base;
|
|
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
|
|
if (!usb_base)
|
|
return -ENOMEM;
|
|
usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
|
|
|
|
/* Set the PHY clock to 19.2MHz */
|
|
v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
|
|
v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
|
|
v |= MX51_USB_PLL_DIV_19_2_MHZ;
|
|
__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
|
|
iounmap(usb_base);
|
|
|
|
mdelay(10);
|
|
|
|
return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
|
|
}
|
|
|
|
static struct mxc_usbh_platform_data dr_utmi_config = {
|
|
.init = initialize_otg_port,
|
|
.portsc = MXC_EHCI_UTMI_16BIT,
|
|
};
|
|
|
|
static int initialize_usbh1_port(struct platform_device *pdev)
|
|
{
|
|
iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
|
|
iomux_v3_cfg_t usbh1gpio = MX51_PAD_USBH1_STP__GPIO1_27;
|
|
u32 v;
|
|
void __iomem *usb_base;
|
|
void __iomem *socregs_base;
|
|
|
|
mxc_iomux_v3_setup_pad(usbh1gpio);
|
|
gpio_request(EFIKAMX_USBH1_STP, "usbh1_stp");
|
|
gpio_direction_output(EFIKAMX_USBH1_STP, 0);
|
|
msleep(1);
|
|
gpio_set_value(EFIKAMX_USBH1_STP, 1);
|
|
msleep(1);
|
|
|
|
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
|
|
socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
|
|
|
|
/* The clock for the USBH1 ULPI port will come externally */
|
|
/* from the PHY. */
|
|
v = __raw_readl(socregs_base + MX51_USB_CTRL_1_OFFSET);
|
|
__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
|
|
socregs_base + MX51_USB_CTRL_1_OFFSET);
|
|
|
|
iounmap(usb_base);
|
|
|
|
gpio_free(EFIKAMX_USBH1_STP);
|
|
mxc_iomux_v3_setup_pad(usbh1stp);
|
|
|
|
mdelay(10);
|
|
|
|
return mx51_initialize_usb_hw(0, MXC_EHCI_ITC_NO_THRESHOLD);
|
|
}
|
|
|
|
static struct mxc_usbh_platform_data usbh1_config = {
|
|
.init = initialize_usbh1_port,
|
|
.portsc = MXC_EHCI_MODE_ULPI,
|
|
};
|
|
|
|
static void mx51_efika_hubreset(void)
|
|
{
|
|
gpio_request(EFIKAMX_USB_HUB_RESET, "usb_hub_rst");
|
|
gpio_direction_output(EFIKAMX_USB_HUB_RESET, 1);
|
|
msleep(1);
|
|
gpio_set_value(EFIKAMX_USB_HUB_RESET, 0);
|
|
msleep(1);
|
|
gpio_set_value(EFIKAMX_USB_HUB_RESET, 1);
|
|
}
|
|
|
|
static void __init mx51_efika_usb(void)
|
|
{
|
|
mx51_efika_hubreset();
|
|
|
|
/* pulling it low, means no USB at all... */
|
|
gpio_request(EFIKA_USB_PHY_RESET, "usb_phy_reset");
|
|
gpio_direction_output(EFIKA_USB_PHY_RESET, 0);
|
|
msleep(1);
|
|
gpio_set_value(EFIKA_USB_PHY_RESET, 1);
|
|
|
|
usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
|
|
ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
|
|
|
|
mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
|
|
if (usbh1_config.otg)
|
|
mxc_register_device(&mxc_usbh1_device, &usbh1_config);
|
|
}
|
|
|
|
static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
|
|
{
|
|
.name = "u-boot",
|
|
.offset = 0,
|
|
.size = SZ_256K,
|
|
},
|
|
{
|
|
.name = "config",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_64K,
|
|
},
|
|
};
|
|
|
|
static struct flash_platform_data mx51_efika_spi_flash_data = {
|
|
.name = "spi_flash",
|
|
.parts = mx51_efika_spi_nor_partitions,
|
|
.nr_parts = ARRAY_SIZE(mx51_efika_spi_nor_partitions),
|
|
.type = "sst25vf032b",
|
|
};
|
|
|
|
static struct regulator_consumer_supply sw1_consumers[] = {
|
|
{
|
|
.supply = "cpu_vcc",
|
|
}
|
|
};
|
|
|
|
static struct regulator_consumer_supply vdig_consumers[] = {
|
|
/* sgtl5000 */
|
|
REGULATOR_SUPPLY("VDDA", "1-000a"),
|
|
REGULATOR_SUPPLY("VDDD", "1-000a"),
|
|
};
|
|
|
|
static struct regulator_consumer_supply vvideo_consumers[] = {
|
|
/* sgtl5000 */
|
|
REGULATOR_SUPPLY("VDDIO", "1-000a"),
|
|
};
|
|
|
|
static struct regulator_consumer_supply vsd_consumers[] = {
|
|
REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.0"),
|
|
REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.1"),
|
|
};
|
|
|
|
static struct regulator_consumer_supply pwgt1_consumer[] = {
|
|
{
|
|
.supply = "pwgt1",
|
|
}
|
|
};
|
|
|
|
static struct regulator_consumer_supply pwgt2_consumer[] = {
|
|
{
|
|
.supply = "pwgt2",
|
|
}
|
|
};
|
|
|
|
static struct regulator_consumer_supply coincell_consumer[] = {
|
|
{
|
|
.supply = "coincell",
|
|
}
|
|
};
|
|
|
|
static struct regulator_init_data sw1_init = {
|
|
.constraints = {
|
|
.name = "SW1",
|
|
.min_uV = 600000,
|
|
.max_uV = 1375000,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
|
|
.valid_modes_mask = 0,
|
|
.always_on = 1,
|
|
.boot_on = 1,
|
|
.state_mem = {
|
|
.uV = 850000,
|
|
.mode = REGULATOR_MODE_NORMAL,
|
|
.enabled = 1,
|
|
},
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
|
|
.consumer_supplies = sw1_consumers,
|
|
};
|
|
|
|
static struct regulator_init_data sw2_init = {
|
|
.constraints = {
|
|
.name = "SW2",
|
|
.min_uV = 900000,
|
|
.max_uV = 1850000,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
|
|
.always_on = 1,
|
|
.boot_on = 1,
|
|
.state_mem = {
|
|
.uV = 950000,
|
|
.mode = REGULATOR_MODE_NORMAL,
|
|
.enabled = 1,
|
|
},
|
|
}
|
|
};
|
|
|
|
static struct regulator_init_data sw3_init = {
|
|
.constraints = {
|
|
.name = "SW3",
|
|
.min_uV = 1100000,
|
|
.max_uV = 1850000,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
|
|
.always_on = 1,
|
|
.boot_on = 1,
|
|
}
|
|
};
|
|
|
|
static struct regulator_init_data sw4_init = {
|
|
.constraints = {
|
|
.name = "SW4",
|
|
.min_uV = 1100000,
|
|
.max_uV = 1850000,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
|
|
.always_on = 1,
|
|
.boot_on = 1,
|
|
}
|
|
};
|
|
|
|
static struct regulator_init_data viohi_init = {
|
|
.constraints = {
|
|
.name = "VIOHI",
|
|
.boot_on = 1,
|
|
.always_on = 1,
|
|
}
|
|
};
|
|
|
|
static struct regulator_init_data vusb_init = {
|
|
.constraints = {
|
|
.name = "VUSB",
|
|
.boot_on = 1,
|
|
.always_on = 1,
|
|
}
|
|
};
|
|
|
|
static struct regulator_init_data swbst_init = {
|
|
.constraints = {
|
|
.name = "SWBST",
|
|
}
|
|
};
|
|
|
|
static struct regulator_init_data vdig_init = {
|
|
.constraints = {
|
|
.name = "VDIG",
|
|
.min_uV = 1050000,
|
|
.max_uV = 1800000,
|
|
.valid_ops_mask =
|
|
REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
|
|
.boot_on = 1,
|
|
.always_on = 1,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(vdig_consumers),
|
|
.consumer_supplies = vdig_consumers,
|
|
};
|
|
|
|
static struct regulator_init_data vpll_init = {
|
|
.constraints = {
|
|
.name = "VPLL",
|
|
.min_uV = 1050000,
|
|
.max_uV = 1800000,
|
|
.valid_ops_mask =
|
|
REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
|
|
.boot_on = 1,
|
|
.always_on = 1,
|
|
}
|
|
};
|
|
|
|
static struct regulator_init_data vusb2_init = {
|
|
.constraints = {
|
|
.name = "VUSB2",
|
|
.min_uV = 2400000,
|
|
.max_uV = 2775000,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
|
|
.boot_on = 1,
|
|
.always_on = 1,
|
|
}
|
|
};
|
|
|
|
static struct regulator_init_data vvideo_init = {
|
|
.constraints = {
|
|
.name = "VVIDEO",
|
|
.min_uV = 2775000,
|
|
.max_uV = 2775000,
|
|
.valid_ops_mask =
|
|
REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
|
|
.boot_on = 1,
|
|
.apply_uV = 1,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(vvideo_consumers),
|
|
.consumer_supplies = vvideo_consumers,
|
|
};
|
|
|
|
static struct regulator_init_data vaudio_init = {
|
|
.constraints = {
|
|
.name = "VAUDIO",
|
|
.min_uV = 2300000,
|
|
.max_uV = 3000000,
|
|
.valid_ops_mask =
|
|
REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
|
|
.boot_on = 1,
|
|
}
|
|
};
|
|
|
|
static struct regulator_init_data vsd_init = {
|
|
.constraints = {
|
|
.name = "VSD",
|
|
.min_uV = 1800000,
|
|
.max_uV = 3150000,
|
|
.valid_ops_mask =
|
|
REGULATOR_CHANGE_VOLTAGE,
|
|
.boot_on = 1,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(vsd_consumers),
|
|
.consumer_supplies = vsd_consumers,
|
|
};
|
|
|
|
static struct regulator_init_data vcam_init = {
|
|
.constraints = {
|
|
.name = "VCAM",
|
|
.min_uV = 2500000,
|
|
.max_uV = 3000000,
|
|
.valid_ops_mask =
|
|
REGULATOR_CHANGE_VOLTAGE |
|
|
REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
|
|
.valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
|
|
.boot_on = 1,
|
|
}
|
|
};
|
|
|
|
static struct regulator_init_data vgen1_init = {
|
|
.constraints = {
|
|
.name = "VGEN1",
|
|
.min_uV = 1200000,
|
|
.max_uV = 3150000,
|
|
.valid_ops_mask =
|
|
REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
|
|
.boot_on = 1,
|
|
.always_on = 1,
|
|
}
|
|
};
|
|
|
|
static struct regulator_init_data vgen2_init = {
|
|
.constraints = {
|
|
.name = "VGEN2",
|
|
.min_uV = 1200000,
|
|
.max_uV = 3150000,
|
|
.valid_ops_mask =
|
|
REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
|
|
.boot_on = 1,
|
|
.always_on = 1,
|
|
}
|
|
};
|
|
|
|
static struct regulator_init_data vgen3_init = {
|
|
.constraints = {
|
|
.name = "VGEN3",
|
|
.min_uV = 1800000,
|
|
.max_uV = 2900000,
|
|
.valid_ops_mask =
|
|
REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
|
|
.boot_on = 1,
|
|
.always_on = 1,
|
|
}
|
|
};
|
|
|
|
static struct regulator_init_data gpo1_init = {
|
|
.constraints = {
|
|
.name = "GPO1",
|
|
}
|
|
};
|
|
|
|
static struct regulator_init_data gpo2_init = {
|
|
.constraints = {
|
|
.name = "GPO2",
|
|
}
|
|
};
|
|
|
|
static struct regulator_init_data gpo3_init = {
|
|
.constraints = {
|
|
.name = "GPO3",
|
|
}
|
|
};
|
|
|
|
static struct regulator_init_data gpo4_init = {
|
|
.constraints = {
|
|
.name = "GPO4",
|
|
}
|
|
};
|
|
|
|
static struct regulator_init_data pwgt1_init = {
|
|
.constraints = {
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.boot_on = 1,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(pwgt1_consumer),
|
|
.consumer_supplies = pwgt1_consumer,
|
|
};
|
|
|
|
static struct regulator_init_data pwgt2_init = {
|
|
.constraints = {
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.boot_on = 1,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(pwgt2_consumer),
|
|
.consumer_supplies = pwgt2_consumer,
|
|
};
|
|
|
|
static struct regulator_init_data vcoincell_init = {
|
|
.constraints = {
|
|
.name = "COINCELL",
|
|
.min_uV = 3000000,
|
|
.max_uV = 3000000,
|
|
.valid_ops_mask =
|
|
REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(coincell_consumer),
|
|
.consumer_supplies = coincell_consumer,
|
|
};
|
|
|
|
static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = {
|
|
{ .id = MC13892_SW1, .init_data = &sw1_init },
|
|
{ .id = MC13892_SW2, .init_data = &sw2_init },
|
|
{ .id = MC13892_SW3, .init_data = &sw3_init },
|
|
{ .id = MC13892_SW4, .init_data = &sw4_init },
|
|
{ .id = MC13892_SWBST, .init_data = &swbst_init },
|
|
{ .id = MC13892_VIOHI, .init_data = &viohi_init },
|
|
{ .id = MC13892_VPLL, .init_data = &vpll_init },
|
|
{ .id = MC13892_VDIG, .init_data = &vdig_init },
|
|
{ .id = MC13892_VSD, .init_data = &vsd_init },
|
|
{ .id = MC13892_VUSB2, .init_data = &vusb2_init },
|
|
{ .id = MC13892_VVIDEO, .init_data = &vvideo_init },
|
|
{ .id = MC13892_VAUDIO, .init_data = &vaudio_init },
|
|
{ .id = MC13892_VCAM, .init_data = &vcam_init },
|
|
{ .id = MC13892_VGEN1, .init_data = &vgen1_init },
|
|
{ .id = MC13892_VGEN2, .init_data = &vgen2_init },
|
|
{ .id = MC13892_VGEN3, .init_data = &vgen3_init },
|
|
{ .id = MC13892_VUSB, .init_data = &vusb_init },
|
|
{ .id = MC13892_GPO1, .init_data = &gpo1_init },
|
|
{ .id = MC13892_GPO2, .init_data = &gpo2_init },
|
|
{ .id = MC13892_GPO3, .init_data = &gpo3_init },
|
|
{ .id = MC13892_GPO4, .init_data = &gpo4_init },
|
|
{ .id = MC13892_PWGT1SPI, .init_data = &pwgt1_init },
|
|
{ .id = MC13892_PWGT2SPI, .init_data = &pwgt2_init },
|
|
{ .id = MC13892_VCOINCELL, .init_data = &vcoincell_init },
|
|
};
|
|
|
|
static struct mc13xxx_platform_data mx51_efika_mc13892_data = {
|
|
.flags = MC13XXX_USE_RTC | MC13XXX_USE_REGULATOR,
|
|
.regulators = {
|
|
.num_regulators = ARRAY_SIZE(mx51_efika_regulators),
|
|
.regulators = mx51_efika_regulators,
|
|
},
|
|
};
|
|
|
|
static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
|
|
{
|
|
.modalias = "m25p80",
|
|
.max_speed_hz = 25000000,
|
|
.bus_num = 0,
|
|
.chip_select = 1,
|
|
.platform_data = &mx51_efika_spi_flash_data,
|
|
.irq = -1,
|
|
},
|
|
{
|
|
.modalias = "mc13892",
|
|
.max_speed_hz = 1000000,
|
|
.bus_num = 0,
|
|
.chip_select = 0,
|
|
.platform_data = &mx51_efika_mc13892_data,
|
|
.irq = gpio_to_irq(EFIKAMX_PMIC),
|
|
},
|
|
};
|
|
|
|
static int mx51_efika_spi_cs[] = {
|
|
EFIKAMX_SPI_CS0,
|
|
EFIKAMX_SPI_CS1,
|
|
};
|
|
|
|
static const struct spi_imx_master mx51_efika_spi_pdata __initconst = {
|
|
.chipselect = mx51_efika_spi_cs,
|
|
.num_chipselect = ARRAY_SIZE(mx51_efika_spi_cs),
|
|
};
|
|
|
|
void __init efika_board_common_init(void)
|
|
{
|
|
mxc_iomux_v3_setup_multiple_pads(mx51efika_pads,
|
|
ARRAY_SIZE(mx51efika_pads));
|
|
imx51_add_imx_uart(0, &uart_pdata);
|
|
mx51_efika_usb();
|
|
imx51_add_sdhci_esdhc_imx(0, NULL);
|
|
|
|
/* FIXME: comes from original code. check this. */
|
|
if (mx51_revision() < IMX_CHIP_REVISION_2_0)
|
|
sw2_init.constraints.state_mem.uV = 1100000;
|
|
else if (mx51_revision() == IMX_CHIP_REVISION_2_0) {
|
|
sw2_init.constraints.state_mem.uV = 1250000;
|
|
sw1_init.constraints.state_mem.uV = 1000000;
|
|
}
|
|
if (machine_is_mx51_efikasb())
|
|
vgen1_init.constraints.max_uV = 1200000;
|
|
|
|
gpio_request(EFIKAMX_PMIC, "pmic irq");
|
|
gpio_direction_input(EFIKAMX_PMIC);
|
|
spi_register_board_info(mx51_efika_spi_board_info,
|
|
ARRAY_SIZE(mx51_efika_spi_board_info));
|
|
imx51_add_ecspi(0, &mx51_efika_spi_pdata);
|
|
|
|
#if defined(CONFIG_CPU_FREQ_IMX)
|
|
get_cpu_op = mx51_get_cpu_op;
|
|
#endif
|
|
}
|
|
|