mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2025-01-24 08:49:38 +07:00
f477b7fb13
fix the previous patch some mistake below:
1. DT in slave node, use "spi-tx-nbits = <1/2/4>" in place of using
"spi-tx-dual, spi-tx-quad" directly, same to rx. So correct the
previous way to get the property in @of_register_spi_devices().
2. Change the value of transfer bit macro(SPI_NBITS_SINGLE, SPI_NBITS_DUAL
SPI_NBITS_QUAD) to 0x01, 0x02 and 0x04 to match the actual wires.
3. Add the following check
(1)keep the tx_nbits and rx_nbits in spi_transfer is not beyond the
single, dual and quad.
(2)keep tx_nbits and rx_nbits are contained by @spi_device->mode
example: if @spi_device->mode = DUAL, then tx/rx_nbits can not be set
to QUAD(SPI_NBITS_QUAD)
(3)if "@spi_device->mode & SPI_3WIRE", then tx/rx_nbits should be in
single(SPI_NBITS_SINGLE)
Signed-off-by: wangyuhang <wangyuhang2014@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
||
|---|---|---|
| .. | ||
| 74x164.h | ||
| ad7877.h | ||
| ad7879.h | ||
| ads7846.h | ||
| at73c213.h | ||
| at86rf230.h | ||
| corgi_lcd.h | ||
| ds1305.h | ||
| eeprom.h | ||
| flash.h | ||
| ifx_modem.h | ||
| l4f00242t03.h | ||
| libertas_spi.h | ||
| lms283gf05.h | ||
| max7301.h | ||
| mc33880.h | ||
| mcp23s08.h | ||
| mmc_spi.h | ||
| mxs-spi.h | ||
| pxa2xx_spi.h | ||
| rspi.h | ||
| s3c24xx.h | ||
| sh_hspi.h | ||
| sh_msiof.h | ||
| spi_bitbang.h | ||
| spi_gpio.h | ||
| spi_oc_tiny.h | ||
| spi.h | ||
| tdo24m.h | ||
| tle62x0.h | ||
| tsc2005.h | ||
| xilinx_spi.h | ||