mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 21:59:15 +07:00
abe60a3a7a
Remove the usage of skeleton.dtsi in the remaining dts files. It was
deprecated since commit 9c0da3cc61 ("ARM: dts: explicitly mark
skeleton.dtsi as deprecated"). This will make adding a unit-address to
memory nodes easier.
The main tricky part to removing skeleton.dtsi is we could end up with
no /memory node at all when a bootloader depends on one being present. I
hacked up dtc to check for this condition.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
529 lines
11 KiB
Plaintext
529 lines
11 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/clock/qcom,gcc-apq8084.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
model = "Qualcomm APQ 8084";
|
|
compatible = "qcom,apq8084";
|
|
interrupt-parent = <&intc>;
|
|
|
|
reserved-memory {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
smem_mem: smem_region@fa00000 {
|
|
reg = <0xfa00000 0x200000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,krait";
|
|
reg = <0>;
|
|
enable-method = "qcom,kpss-acc-v2";
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc0>;
|
|
qcom,saw = <&saw0>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,krait";
|
|
reg = <1>;
|
|
enable-method = "qcom,kpss-acc-v2";
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc1>;
|
|
qcom,saw = <&saw1>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,krait";
|
|
reg = <2>;
|
|
enable-method = "qcom,kpss-acc-v2";
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc2>;
|
|
qcom,saw = <&saw2>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,krait";
|
|
reg = <3>;
|
|
enable-method = "qcom,kpss-acc-v2";
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc3>;
|
|
qcom,saw = <&saw3>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
L2: l2-cache {
|
|
compatible = "qcom,arch-cache";
|
|
cache-level = <2>;
|
|
qcom,saw = <&saw_l2>;
|
|
};
|
|
|
|
idle-states {
|
|
CPU_SPC: spc {
|
|
compatible = "qcom,idle-state-spc",
|
|
"arm,idle-state";
|
|
entry-latency-us = <150>;
|
|
exit-latency-us = <200>;
|
|
min-residency-us = <2000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x0 0x0>;
|
|
};
|
|
|
|
firmware {
|
|
scm {
|
|
compatible = "qcom,scm";
|
|
clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
|
|
clock-names = "core", "bus", "iface";
|
|
};
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu-thermal0 {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 5>;
|
|
|
|
trips {
|
|
cpu_alert0: trip0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu_crit0: trip1 {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu-thermal1 {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 6>;
|
|
|
|
trips {
|
|
cpu_alert1: trip0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu_crit1: trip1 {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu-thermal2 {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 7>;
|
|
|
|
trips {
|
|
cpu_alert2: trip0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu_crit2: trip1 {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu-thermal3 {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 8>;
|
|
|
|
trips {
|
|
cpu_alert3: trip0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu_crit3: trip1 {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu-pmu {
|
|
compatible = "qcom,krait-pmu";
|
|
interrupts = <1 7 0xf04>;
|
|
};
|
|
|
|
clocks {
|
|
xo_board: xo_board {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <19200000>;
|
|
};
|
|
|
|
sleep_clk: sleep_clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <1 2 0xf08>,
|
|
<1 3 0xf08>,
|
|
<1 4 0xf08>,
|
|
<1 1 0xf08>;
|
|
clock-frequency = <19200000>;
|
|
};
|
|
|
|
smem {
|
|
compatible = "qcom,smem";
|
|
|
|
qcom,rpm-msg-ram = <&rpm_msg_ram>;
|
|
memory-region = <&smem_mem>;
|
|
|
|
hwlocks = <&tcsr_mutex 3>;
|
|
};
|
|
|
|
soc: soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "simple-bus";
|
|
|
|
intc: interrupt-controller@f9000000 {
|
|
compatible = "qcom,msm-qgic2";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
reg = <0xf9000000 0x1000>,
|
|
<0xf9002000 0x1000>;
|
|
};
|
|
|
|
apcs: syscon@f9011000 {
|
|
compatible = "syscon";
|
|
reg = <0xf9011000 0x1000>;
|
|
};
|
|
|
|
qfprom: qfprom@fc4bc000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "qcom,qfprom";
|
|
reg = <0xfc4bc000 0x1000>;
|
|
tsens_calib: calib@d0 {
|
|
reg = <0xd0 0x18>;
|
|
};
|
|
tsens_backup: backup@440 {
|
|
reg = <0x440 0x10>;
|
|
};
|
|
};
|
|
|
|
tsens: thermal-sensor@fc4a8000 {
|
|
compatible = "qcom,msm8974-tsens";
|
|
reg = <0xfc4a8000 0x2000>;
|
|
nvmem-cells = <&tsens_calib>, <&tsens_backup>;
|
|
nvmem-cell-names = "calib", "calib_backup";
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
|
|
timer@f9020000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "arm,armv7-timer-mem";
|
|
reg = <0xf9020000 0x1000>;
|
|
clock-frequency = <19200000>;
|
|
|
|
frame@f9021000 {
|
|
frame-number = <0>;
|
|
interrupts = <0 8 0x4>,
|
|
<0 7 0x4>;
|
|
reg = <0xf9021000 0x1000>,
|
|
<0xf9022000 0x1000>;
|
|
};
|
|
|
|
frame@f9023000 {
|
|
frame-number = <1>;
|
|
interrupts = <0 9 0x4>;
|
|
reg = <0xf9023000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@f9024000 {
|
|
frame-number = <2>;
|
|
interrupts = <0 10 0x4>;
|
|
reg = <0xf9024000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@f9025000 {
|
|
frame-number = <3>;
|
|
interrupts = <0 11 0x4>;
|
|
reg = <0xf9025000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@f9026000 {
|
|
frame-number = <4>;
|
|
interrupts = <0 12 0x4>;
|
|
reg = <0xf9026000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@f9027000 {
|
|
frame-number = <5>;
|
|
interrupts = <0 13 0x4>;
|
|
reg = <0xf9027000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@f9028000 {
|
|
frame-number = <6>;
|
|
interrupts = <0 14 0x4>;
|
|
reg = <0xf9028000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
saw0: power-controller@f9089000 {
|
|
compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
|
|
reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
|
|
};
|
|
|
|
saw1: power-controller@f9099000 {
|
|
compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
|
|
reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
|
|
};
|
|
|
|
saw2: power-controller@f90a9000 {
|
|
compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
|
|
reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
|
|
};
|
|
|
|
saw3: power-controller@f90b9000 {
|
|
compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
|
|
reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
|
|
};
|
|
|
|
saw_l2: power-controller@f9012000 {
|
|
compatible = "qcom,saw2";
|
|
reg = <0xf9012000 0x1000>;
|
|
regulator;
|
|
};
|
|
|
|
acc0: clock-controller@f9088000 {
|
|
compatible = "qcom,kpss-acc-v2";
|
|
reg = <0xf9088000 0x1000>,
|
|
<0xf9008000 0x1000>;
|
|
};
|
|
|
|
acc1: clock-controller@f9098000 {
|
|
compatible = "qcom,kpss-acc-v2";
|
|
reg = <0xf9098000 0x1000>,
|
|
<0xf9008000 0x1000>;
|
|
};
|
|
|
|
acc2: clock-controller@f90a8000 {
|
|
compatible = "qcom,kpss-acc-v2";
|
|
reg = <0xf90a8000 0x1000>,
|
|
<0xf9008000 0x1000>;
|
|
};
|
|
|
|
acc3: clock-controller@f90b8000 {
|
|
compatible = "qcom,kpss-acc-v2";
|
|
reg = <0xf90b8000 0x1000>,
|
|
<0xf9008000 0x1000>;
|
|
};
|
|
|
|
restart@fc4ab000 {
|
|
compatible = "qcom,pshold";
|
|
reg = <0xfc4ab000 0x4>;
|
|
};
|
|
|
|
gcc: clock-controller@fc400000 {
|
|
compatible = "qcom,gcc-apq8084";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
#power-domain-cells = <1>;
|
|
reg = <0xfc400000 0x4000>;
|
|
};
|
|
|
|
tcsr_mutex_regs: syscon@fd484000 {
|
|
compatible = "syscon";
|
|
reg = <0xfd484000 0x2000>;
|
|
};
|
|
|
|
tcsr_mutex: hwlock {
|
|
compatible = "qcom,tcsr-mutex";
|
|
syscon = <&tcsr_mutex_regs 0 0x80>;
|
|
#hwlock-cells = <1>;
|
|
};
|
|
|
|
rpm_msg_ram: memory@fc428000 {
|
|
compatible = "qcom,rpm-msg-ram";
|
|
reg = <0xfc428000 0x4000>;
|
|
};
|
|
|
|
tlmm: pinctrl@fd510000 {
|
|
compatible = "qcom,apq8084-pinctrl";
|
|
reg = <0xfd510000 0x4000>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0 208 0>;
|
|
};
|
|
|
|
blsp2_uart2: serial@f995e000 {
|
|
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
|
reg = <0xf995e000 0x1000>;
|
|
interrupts = <0 114 0x0>;
|
|
clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@f9824900 {
|
|
compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
|
|
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
|
|
reg-names = "hc_mem", "core_mem";
|
|
interrupts = <0 123 0>, <0 138 0>;
|
|
interrupt-names = "hc_irq", "pwr_irq";
|
|
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
|
|
<&gcc GCC_SDCC1_AHB_CLK>,
|
|
<&xo_board>;
|
|
clock-names = "core", "iface", "xo";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@f98a4900 {
|
|
compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
|
|
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
|
|
reg-names = "hc_mem", "core_mem";
|
|
interrupts = <0 125 0>, <0 221 0>;
|
|
interrupt-names = "hc_irq", "pwr_irq";
|
|
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
|
|
<&gcc GCC_SDCC2_AHB_CLK>,
|
|
<&xo_board>;
|
|
clock-names = "core", "iface", "xo";
|
|
status = "disabled";
|
|
};
|
|
|
|
spmi_bus: spmi@fc4cf000 {
|
|
compatible = "qcom,spmi-pmic-arb";
|
|
reg-names = "core", "intr", "cnfg";
|
|
reg = <0xfc4cf000 0x1000>,
|
|
<0xfc4cb000 0x1000>,
|
|
<0xfc4ca000 0x1000>;
|
|
interrupt-names = "periph_irq";
|
|
interrupts = <0 190 0>;
|
|
qcom,ee = <0>;
|
|
qcom,channel = <0>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <4>;
|
|
};
|
|
};
|
|
|
|
smd {
|
|
compatible = "qcom,smd";
|
|
|
|
rpm {
|
|
interrupts = <0 168 1>;
|
|
qcom,ipc = <&apcs 8 0>;
|
|
qcom,smd-edge = <15>;
|
|
|
|
rpm_requests {
|
|
compatible = "qcom,rpm-apq8084";
|
|
qcom,smd-channels = "rpm_requests";
|
|
|
|
pma8084-regulators {
|
|
compatible = "qcom,rpm-pma8084-regulators";
|
|
|
|
pma8084_s1: s1 {};
|
|
pma8084_s2: s2 {};
|
|
pma8084_s3: s3 {};
|
|
pma8084_s4: s4 {};
|
|
pma8084_s5: s5 {};
|
|
pma8084_s6: s6 {};
|
|
pma8084_s7: s7 {};
|
|
pma8084_s8: s8 {};
|
|
pma8084_s9: s9 {};
|
|
pma8084_s10: s10 {};
|
|
pma8084_s11: s11 {};
|
|
pma8084_s12: s12 {};
|
|
|
|
pma8084_l1: l1 {};
|
|
pma8084_l2: l2 {};
|
|
pma8084_l3: l3 {};
|
|
pma8084_l4: l4 {};
|
|
pma8084_l5: l5 {};
|
|
pma8084_l6: l6 {};
|
|
pma8084_l7: l7 {};
|
|
pma8084_l8: l8 {};
|
|
pma8084_l9: l9 {};
|
|
pma8084_l10: l10 {};
|
|
pma8084_l11: l11 {};
|
|
pma8084_l12: l12 {};
|
|
pma8084_l13: l13 {};
|
|
pma8084_l14: l14 {};
|
|
pma8084_l15: l15 {};
|
|
pma8084_l16: l16 {};
|
|
pma8084_l17: l17 {};
|
|
pma8084_l18: l18 {};
|
|
pma8084_l19: l19 {};
|
|
pma8084_l20: l20 {};
|
|
pma8084_l21: l21 {};
|
|
pma8084_l22: l22 {};
|
|
pma8084_l23: l23 {};
|
|
pma8084_l24: l24 {};
|
|
pma8084_l25: l25 {};
|
|
pma8084_l26: l26 {};
|
|
pma8084_l27: l27 {};
|
|
|
|
pma8084_lvs1: lvs1 {};
|
|
pma8084_lvs2: lvs2 {};
|
|
pma8084_lvs3: lvs3 {};
|
|
pma8084_lvs4: lvs4 {};
|
|
|
|
pma8084_5vs1: 5vs1 {};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|