AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-19 23:07:20 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
f406f222d4
linux_dsm_epyc7002/arch/x86/boot/compressed/head_32.S
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

283 lines
6.1 KiB
ArmAsm
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* linux/boot/head.S
*
* Copyright (C) 1991, 1992, 1993 Linus Torvalds
*/
/*
* head.S contains the 32-bit startup code.
*
* NOTE!!! Startup happens at absolute address 0x00001000, which is also where
* the page directory will exist. The startup code will be overwritten by
* the page directory. [According to comments etc elsewhere on a compressed
* kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
*
* Page 0 is deliberately kept safe, since System Management Mode code in
* laptops may need to access the BIOS data stored there. This is also
* useful for future device drivers that either access the BIOS via VM86
* mode.
*/
/*
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
*/
.text
#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/page_types.h>
#include <asm/boot.h>
#include <asm/asm-offsets.h>
#include <asm/bootparam.h>
/*
* The 32-bit x86 assembler in binutils 2.26 will generate R_386_GOT32X
* relocation to get the symbol address in PIC. When the compressed x86
* kernel isn't built as PIC, the linker optimizes R_386_GOT32X
* relocations to their fixed symbol addresses. However, when the
* compressed x86 kernel is loaded at a different address, it leads
* to the following load failure:
*
* Failed to allocate space for phdrs
*
* during the decompression stage.
*
* If the compressed x86 kernel is relocatable at run-time, it should be
* compiled with -fPIE, instead of -fPIC, if possible and should be built as
* Position Independent Executable (PIE) so that linker won't optimize
* R_386_GOT32X relocation to its fixed symbol address. Older
* linkers generate R_386_32 relocations against locally defined symbols,
* _bss, _ebss, _got and _egot, in PIE. It isn't wrong, just less
* optimal than R_386_RELATIVE. But the x86 kernel fails to properly handle
* R_386_32 relocations when relocating the kernel. To generate
* R_386_RELATIVE relocations, we mark _bss, _ebss, _got and _egot as
* hidden:
*/
.hidden _bss
.hidden _ebss
.hidden _got
.hidden _egot
__HEAD
ENTRY(startup_32)
cld
/*
* Test KEEP_SEGMENTS flag to see if the bootloader is asking
* us to not reload segments
*/
testb $KEEP_SEGMENTS, BP_loadflags(%esi)
jnz 1f
cli
movl $__BOOT_DS, %eax
movl %eax, %ds
movl %eax, %es
movl %eax, %fs
movl %eax, %gs
movl %eax, %ss
1:
/*
* Calculate the delta between where we were compiled to run
* at and where we were actually loaded at. This can only be done
* with a short local call on x86. Nothing else will tell us what
* address we are running at. The reserved chunk of the real-mode
* data at 0x1e4 (defined as a scratch field) are used as the stack
* for this calculation. Only 4 bytes are needed.
*/
leal (BP_scratch+4)(%esi), %esp
call 1f
1: popl %ebp
subl $1b, %ebp
/*
* %ebp contains the address we are loaded at by the boot loader and %ebx
* contains the address where we should move the kernel image temporarily
* for safe in-place decompression.
*/
#ifdef CONFIG_RELOCATABLE
movl %ebp, %ebx
movl BP_kernel_alignment(%esi), %eax
decl %eax
addl %eax, %ebx
notl %eax
andl %eax, %ebx
cmpl $LOAD_PHYSICAL_ADDR, %ebx
jge 1f
#endif
movl $LOAD_PHYSICAL_ADDR, %ebx
1:
/* Target address to relocate to for decompression */
movl BP_init_size(%esi), %eax
subl $_end, %eax
addl %eax, %ebx
/* Set up the stack */
leal boot_stack_end(%ebx), %esp
/* Zero EFLAGS */
pushl $0
popfl
/*
* Copy the compressed kernel to the end of our buffer
* where decompression in place becomes safe.
*/
pushl %esi
leal (_bss-4)(%ebp), %esi
leal (_bss-4)(%ebx), %edi
movl $(_bss - startup_32), %ecx
shrl $2, %ecx
std
rep movsl
cld
popl %esi
/*
* Jump to the relocated address.
*/
leal relocated(%ebx), %eax
jmp *%eax
ENDPROC(startup_32)
#ifdef CONFIG_EFI_STUB
/*
* We don't need the return address, so set up the stack so efi_main() can find
* its arguments.
*/
ENTRY(efi_pe_entry)
add $0x4, %esp
call 1f
1: popl %esi
subl $1b, %esi
popl %ecx
movl %ecx, efi32_config(%esi) /* Handle */
popl %ecx
movl %ecx, efi32_config+8(%esi) /* EFI System table pointer */
/* Relocate efi_config->call() */
leal efi32_config(%esi), %eax
add %esi, 40(%eax)
pushl %eax
call make_boot_params
cmpl $0, %eax
je fail
movl %esi, BP_code32_start(%eax)
popl %ecx
pushl %eax
pushl %ecx
jmp 2f /* Skip efi_config initialization */
ENDPROC(efi_pe_entry)
ENTRY(efi32_stub_entry)
add $0x4, %esp
popl %ecx
popl %edx
call 1f
1: popl %esi
subl $1b, %esi
movl %ecx, efi32_config(%esi) /* Handle */
movl %edx, efi32_config+8(%esi) /* EFI System table pointer */
/* Relocate efi_config->call() */
leal efi32_config(%esi), %eax
add %esi, 40(%eax)
pushl %eax
2:
call efi_main
cmpl $0, %eax
movl %eax, %esi
jne 2f
fail:
/* EFI init failed, so hang. */
hlt
jmp fail
2:
movl BP_code32_start(%esi), %eax
leal startup_32(%eax), %eax
jmp *%eax
ENDPROC(efi32_stub_entry)
#endif
.text
relocated:
/*
* Clear BSS (stack is currently empty)
*/
xorl %eax, %eax
leal _bss(%ebx), %edi
leal _ebss(%ebx), %ecx
subl %edi, %ecx
shrl $2, %ecx
rep stosl
/*
* Adjust our own GOT
*/
leal _got(%ebx), %edx
leal _egot(%ebx), %ecx
1:
cmpl %ecx, %edx
jae 2f
addl %ebx, (%edx)
addl $4, %edx
jmp 1b
2:
/*
* Do the extraction, and jump to the new kernel..
*/
/* push arguments for extract_kernel: */
pushl $z_output_len /* decompressed length, end of relocs */
movl BP_init_size(%esi), %eax
subl $_end, %eax
movl %ebx, %ebp
subl %eax, %ebp
pushl %ebp /* output address */
pushl $z_input_len /* input_len */
leal input_data(%ebx), %eax
pushl %eax /* input_data */
leal boot_heap(%ebx), %eax
pushl %eax /* heap area */
pushl %esi /* real mode pointer */
call extract_kernel /* returns kernel location in %eax */
addl $24, %esp
/*
* Jump to the extracted kernel.
*/
xorl %ebx, %ebx
jmp *%eax
#ifdef CONFIG_EFI_STUB
.data
efi32_config:
.fill 5,8,0
.long efi_call_phys
.long 0
.byte 0
#endif
/*
* Stack and heap for uncompression
*/
.bss
.balign 4
boot_heap:
.fill BOOT_HEAP_SIZE, 1, 0
boot_stack:
.fill BOOT_STACK_SIZE, 1, 0
boot_stack_end:
Reference in New Issue View Git Blame Copy Permalink