linux_dsm_epyc7002/drivers/scsi
James Smart f3d0a8acc5 scsi: lpfc: Fix missing check for CSF in Write Object Mbox Rsp
When the WriteObject mailbox response has change_status set to is 0x2
(Firmware Reset) or 0x04 (Port Migration Reset), the CSF field should also
be checked to see if a fw reset is sufficient to enable all new features in
the updated firmware image. If not, a fw reset would start the new
firmware, but with a feature level equal to existing firmware.  To enable
the new features, a chip reset/pci slot reset would be required.

Check the CSF bit when change_status is 0x2 or 0x4 to know whether to
perform a pci bus reset or fw reset.

Link: https://lore.kernel.org/r/20191218235808.31922-4-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-21 13:42:42 -05:00
..
aacraid treewide: Use sizeof_field() macro 2019-12-09 10:36:44 -08:00
aic7xxx scsi: aic7xxx: Adjust indentation in ahc_find_syncrate 2019-12-19 22:08:55 -05:00
aic94xx scsi: aic94xx: Remove unnecessary null check 2019-07-30 12:12:59 -04:00
arcmsr scsi: arcmsr: fix indentation issues 2019-11-19 21:37:34 -05:00
arm scsi: Fix various misspellings of "connect" 2019-10-24 21:22:32 -04:00
be2iscsi treewide: Use sizeof_field() macro 2019-12-09 10:36:44 -08:00
bfa scsi: bfa: Make restart_bfa static 2019-09-30 23:59:53 -04:00
bnx2fc scsi: bnx2fc: timeout calculation invalid for bnx2fc_eh_abort() 2019-11-19 22:31:18 -05:00
bnx2i scsi: bnx2i: fix potential use after free 2019-11-19 21:37:34 -05:00
csiostor scsi: csiostor: Adjust indentation in csio_device_reset 2019-12-19 22:42:44 -05:00
cxgbi treewide: Use sizeof_field() macro 2019-12-09 10:36:44 -08:00
cxlflash SCSI misc on 20191130 2019-12-02 13:37:02 -08:00
device_handler SCSI fixes on 20191101 2019-11-07 06:43:18 -07:00
dpt
esas2r SCSI misc on 20191130 2019-12-02 13:37:02 -08:00
fcoe SCSI misc on 20190919 2019-09-21 10:50:15 -07:00
fnic scsi: fnic: fix use after free 2019-11-06 00:04:02 -05:00
hisi_sas scsi: hisi_sas: Stop converting a bool into a bool 2019-11-12 22:21:34 -05:00
ibmvscsi SCSI misc on 20190919 2019-09-21 10:50:15 -07:00
ibmvscsi_tgt scsi: ibmvscsi_tgt: remove set but not used variables 'iue' and 'sd' 2019-12-19 22:08:54 -05:00
isci scsi: Fix various misspellings of "connect" 2019-10-24 21:22:32 -04:00
libfc scsi: fcoe: Embed fc_rport_priv in fcoe_rport structure 2019-07-29 21:12:35 -04:00
libsas scsi: libsas: stop discovering if oob mode is disconnected 2019-12-09 19:15:52 -05:00
lpfc scsi: lpfc: Fix missing check for CSF in Write Object Mbox Rsp 2019-12-21 13:42:42 -05:00
megaraid SCSI misc on 20191207 2019-12-08 12:23:42 -08:00
mpt3sas scsi: mpt3sas: change allocation option 2019-10-24 21:20:31 -04:00
mvsas scsi: mvsas: remove redundant assignment to variable rc 2019-09-30 22:42:41 -04:00
pcmcia scsi: nsp_cs: enable compile-testing on 64-bit 2019-11-12 22:21:34 -05:00
pm8001 SCSI misc on 20191207 2019-12-08 12:23:42 -08:00
qedf scsi: Fix various misspellings of "connect" 2019-10-24 21:22:32 -04:00
qedi scsi: Fix various misspellings of "connect" 2019-10-24 21:22:32 -04:00
qla2xxx scsi: qla2xxx: Update driver version to 10.01.00.22-k 2019-12-21 13:42:41 -05:00
qla4xxx scsi: qla4xxx: Adjust indentation in qla4xxx_mem_free 2019-12-19 22:08:55 -05:00
smartpqi treewide: Use sizeof_field() macro 2019-12-09 10:36:44 -08:00
snic
sym53c8xx_2 scsi: sym53c8xx: fix typos in comments 2019-12-19 22:08:54 -05:00
ufs scsi: ufs: Power off hook for Cadence UFS driver 2019-12-19 22:08:54 -05:00
.gitignore
3w-9xxx.c
3w-9xxx.h
3w-sas.c
3w-sas.h
3w-xxxx.c compat_ioctl: move more drivers to compat_ptr_ioctl 2019-10-23 17:23:44 +02:00
3w-xxxx.h
53c700_d.h_shipped
53c700.c
53c700.h
53c700.scr
a100u2w.c
a100u2w.h
a2091.c
a2091.h
a3000.c scsi: Use pr_warn instead of pr_warning 2019-10-18 15:01:54 +02:00
a3000.h
a4000t.c
advansys.c SCSI sg on 20190709 2019-07-11 15:17:41 -07:00
aha152x.c SCSI sg on 20190709 2019-07-11 15:17:41 -07:00
aha152x.h
aha1542.c
aha1542.h
aha1740.c
aha1740.h
am53c974.c
atari_scsi.c scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE 2019-11-12 22:21:34 -05:00
atp870u.c scsi: core: Clean up SG_NONE 2019-11-12 22:21:35 -05:00
atp870u.h
BusLogic.c
BusLogic.h
bvme6000_scsi.c
ch.c scsi: ch: Make it possible to open a ch device multiple times again 2019-10-09 23:39:35 -04:00
constants.c
dc395x.c
dc395x.h
dmx3191d.c
dpt_i2o.c
dpti.h
esp_scsi.c scsi: esp_scsi: Add support for FSC chip 2019-12-19 22:08:51 -05:00
esp_scsi.h scsi: esp_scsi: Add support for FSC chip 2019-12-19 22:08:51 -05:00
fdomain_isa.c scsi: fdomain_isa: use CFG1_IRQ_MASK 2019-07-30 12:18:24 -04:00
fdomain_pci.c
fdomain.c scsi: fdomain: use BSTAT_{MSG|CMD|IO} in fdomain_work() 2019-07-30 12:17:28 -04:00
fdomain.h
FlashPoint.c
g_NCR5380.c
gdth_ioctl.h
gdth_proc.c
gdth_proc.h
gdth.c
gdth.h
gvp11.c
gvp11.h
hosts.c scsi: core: avoid host-wide host_busy counter for scsi_mq 2019-11-01 20:12:50 -04:00
hpsa_cmd.h SCSI misc on 20190709 2019-07-11 15:14:01 -07:00
hpsa.c SCSI fixes on 20191101 2019-11-07 06:43:18 -07:00
hpsa.h
hptiop.c
hptiop.h
imm.c SCSI sg on 20190709 2019-07-11 15:17:41 -07:00
imm.h
initio.c scsi: initio: make initio_state_7() static 2019-12-19 22:08:54 -05:00
initio.h
ipr.c SCSI sg on 20190709 2019-07-11 15:17:41 -07:00
ipr.h
ips.c scsi: ips: make array 'options' static const, makes object smaller 2019-09-30 22:46:40 -04:00
ips.h
iscsi_boot_sysfs.c
iscsi_tcp.c scsi: iscsi: Don't send data to unbound connection 2019-11-19 21:37:35 -05:00
iscsi_tcp.h
jazz_esp.c
Kconfig SCSI fixes on 20191101 2019-11-07 06:43:18 -07:00
lasi700.c
libiscsi_tcp.c SCSI misc on 20190709 2019-07-11 15:14:01 -07:00
libiscsi.c scsi: iscsi: Fix a potential deadlock in the timeout handler 2019-12-09 19:19:28 -05:00
mac53c94.c
mac53c94.h
mac_esp.c
mac_scsi.c scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE 2019-11-12 22:21:34 -05:00
Makefile scsi: remove pointless $(MODVERDIR)/$(obj)/53c700.ver 2019-07-17 22:39:27 +09:00
megaraid.c scsi: megaraid: disable device when probe failed after enabled device 2019-09-23 23:09:42 -04:00
megaraid.h
mesh.c
mesh.h
mvme16x_scsi.c
mvme147.c
mvme147.h
mvumi.c SCSI sg on 20190709 2019-07-11 15:17:41 -07:00
mvumi.h
myrb.c
myrb.h
myrs.c
myrs.h
ncr53c8xx.c scsi: Fix various misspellings of "connect" 2019-10-24 21:22:32 -04:00
ncr53c8xx.h
NCR5380.c scsi: NCR5380: Add disconnect_mask module parameter 2019-11-19 21:37:34 -05:00
NCR5380.h
nsp32_debug.c
nsp32_io.h
nsp32.c scsi: Fix various misspellings of "connect" 2019-10-24 21:22:32 -04:00
nsp32.h
pmcraid.c compat_ioctl: move more drivers to compat_ptr_ioctl 2019-10-23 17:23:44 +02:00
pmcraid.h
ppa.c
ppa.h
ps3rom.c
qla1280.c qla1280: remove SGI SN2 support 2019-08-16 11:33:56 -07:00
qla1280.h qla1280: remove SGI SN2 support 2019-08-16 11:33:56 -07:00
qlogicfas408.c
qlogicfas408.h
qlogicfas.c
qlogicpti.c scsi: qlogicpti: Mark expected switch fall-throughs 2019-08-07 21:32:53 -04:00
qlogicpti.h
raid_class.c
script_asm.pl
scsi_common.c
scsi_debug.c scsi: scsi_debug: num_tgts must be >= 0 2019-11-19 21:37:34 -05:00
scsi_debugfs.c scsi: scsi_debugfs: Use for_each_set_bit to simplify code 2019-07-30 12:42:55 -04:00
scsi_debugfs.h
scsi_devinfo.c scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade 2019-07-11 20:39:22 -04:00
scsi_dh.c
scsi_error.c scsi: core: save/restore command resid for error handling 2019-10-03 21:43:04 -04:00
scsi_ioctl.c
scsi_lib_dma.c
scsi_lib.c scsi: core: Adjust DBD setting in MODE SENSE for caching mode page per LLD 2019-12-19 22:08:52 -05:00
scsi_logging.c scsi: core: Log SCSI command age with errors 2019-09-30 23:07:16 -04:00
scsi_logging.h scsi: core: Fix a compiler warning triggered by the SCSI logging code 2019-12-19 22:08:54 -05:00
scsi_netlink.c
scsi_pm.c scsi: core: remove dummy q->dev check 2019-09-12 07:11:58 -06:00
scsi_priv.h scsi: core: avoid host-wide host_busy counter for scsi_mq 2019-11-01 20:12:50 -04:00
scsi_proc.c drivers: Add generic helper to match any device 2019-07-30 13:07:42 +02:00
scsi_sas_internal.h
scsi_scan.c
scsi_sysctl.c
scsi_sysfs.c SCSI misc on 20191130 2019-12-02 13:37:02 -08:00
scsi_trace.c scsi: tracing: Fix handling of TRANSFER LENGTH == 0 for READ(6) and WRITE(6) 2019-11-06 00:06:03 -05:00
scsi_transport_api.h
scsi_transport_fc.c SCSI misc on 20190709 2019-07-11 15:14:01 -07:00
scsi_transport_iscsi.c scsi: iscsi: Avoid potential deadlock in iscsi_if_rx func 2019-12-09 20:36:28 -05:00
scsi_transport_sas.c scsi: scsi_transport_sas: Fix memory leak when removing devices 2019-11-21 21:12:39 -05:00
scsi_transport_spi.c
scsi_transport_srp.c
scsi.c SCSI misc on 20191130 2019-12-02 13:37:02 -08:00
scsi.h
scsicam.c
sd_dif.c
sd_zbc.c SCSI misc on 20191207 2019-12-08 12:23:42 -08:00
sd.c SCSI misc on 20191207 2019-12-08 12:23:42 -08:00
sd.h SCSI misc on 20191207 2019-12-08 12:23:42 -08:00
sense_codes.h
ses.c SCSI misc on 20190709 2019-07-11 15:14:01 -07:00
sg.c SCSI misc on 20191130 2019-12-02 13:37:02 -08:00
sgiwd93.c
sim710.c
sni_53c710.c scsi: sni_53c710: fix compilation error 2019-10-09 23:35:42 -04:00
sr_ioctl.c
sr_vendor.c sr_vendor: support Beurer GL50 evo CD-on-a-chip devices. 2019-11-26 13:02:26 -07:00
sr.c
sr.h
st_options.h
st.c compat_ioctl: move tape handling into drivers 2019-10-23 17:23:44 +02:00
st.h
stex.c
storvsc_drv.c scsi: storvsc: Add the support of hibernation 2019-11-21 20:10:44 -05:00
sun3_scsi_vme.c
sun3_scsi.c scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE 2019-11-12 22:21:34 -05:00
sun3x_esp.c
sun_esp.c
virtio_scsi.c scsi: virtio_scsi: unplug LUNs when events missed 2019-09-10 22:10:17 -04:00
vmw_pvscsi.c scsi: vmw_pvscsi: Silence dma mapping errors 2019-12-19 22:42:44 -05:00
vmw_pvscsi.h
wd33c93.c scsi: wd33c93: Mark expected switch fall-through 2019-08-07 21:35:59 -04:00
wd33c93.h
wd719x.c SCSI misc on 20190709 2019-07-11 15:14:01 -07:00
wd719x.h
xen-scsifront.c
zalon.c
zorro7xx.c
zorro_esp.c scsi: zorro_esp: Limit DMA transfers to 65536 bytes (except on Fastlane) 2019-11-12 22:21:34 -05:00