AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-22 19:03:28 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
f2e85e5736
linux_dsm_epyc7002/drivers/scsi/pmcraid.c
Arnd Bergmann 1832f2d8ff compat_ioctl: move more drivers to compat_ptr_ioctl 
The .ioctl and .compat_ioctl file operations have the same prototype so
they can both point to the same function, which works great almost all
the time when all the commands are compatible.

One exception is the s390 architecture, where a compat pointer is only
31 bit wide, and converting it into a 64-bit pointer requires calling
compat_ptr(). Most drivers here will never run in s390, but since we now
have a generic helper for it, it's easy enough to use it consistently.

I double-checked all these drivers to ensure that all ioctl arguments
are used as pointers or are ignored, but are not interpreted as integer
values.

Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Darren Hart (VMware) <dvhart@infradead.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-10-23 17:23:44 +02:00

5922 lines
163 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* pmcraid.c -- driver for PMC Sierra MaxRAID controller adapters
*
* Written By: Anil Ravindranath<anil_ravindranath@pmc-sierra.com>
* PMC-Sierra Inc
*
* Copyright (C) 2008, 2009 PMC Sierra Inc
*/
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/wait.h>
#include <linux/spinlock.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/firmware.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/hdreg.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <asm/irq.h>
#include <asm/processor.h>
#include <linux/libata.h>
#include <linux/mutex.h>
#include <linux/ktime.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsicam.h>
#include "pmcraid.h"
/*
* Module configuration parameters
*/
static unsigned int pmcraid_debug_log;
static unsigned int pmcraid_disable_aen;
static unsigned int pmcraid_log_level = IOASC_LOG_LEVEL_MUST;
static unsigned int pmcraid_enable_msix;
/*
* Data structures to support multiple adapters by the LLD.
* pmcraid_adapter_count - count of configured adapters
*/
static atomic_t pmcraid_adapter_count = ATOMIC_INIT(0);
/*
* Supporting user-level control interface through IOCTL commands.
* pmcraid_major - major number to use
* pmcraid_minor - minor number(s) to use
*/
static unsigned int pmcraid_major;
static struct class *pmcraid_class;
static DECLARE_BITMAP(pmcraid_minor, PMCRAID_MAX_ADAPTERS);
/*
* Module parameters
*/
MODULE_AUTHOR("Anil Ravindranath<anil_ravindranath@pmc-sierra.com>");
MODULE_DESCRIPTION("PMC Sierra MaxRAID Controller Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(PMCRAID_DRIVER_VERSION);
module_param_named(log_level, pmcraid_log_level, uint, (S_IRUGO | S_IWUSR));
MODULE_PARM_DESC(log_level,
"Enables firmware error code logging, default :1 high-severity"
" errors, 2: all errors including high-severity errors,"
" 0: disables logging");
module_param_named(debug, pmcraid_debug_log, uint, (S_IRUGO | S_IWUSR));
MODULE_PARM_DESC(debug,
"Enable driver verbose message logging. Set 1 to enable."
"(default: 0)");
module_param_named(disable_aen, pmcraid_disable_aen, uint, (S_IRUGO | S_IWUSR));
MODULE_PARM_DESC(disable_aen,
"Disable driver aen notifications to apps. Set 1 to disable."
"(default: 0)");
/* chip specific constants for PMC MaxRAID controllers (same for
* 0x5220 and 0x8010
*/
static struct pmcraid_chip_details pmcraid_chip_cfg[] = {
{
.ioastatus = 0x0,
.ioarrin = 0x00040,
.mailbox = 0x7FC30,
.global_intr_mask = 0x00034,
.ioa_host_intr = 0x0009C,
.ioa_host_intr_clr = 0x000A0,
.ioa_host_msix_intr = 0x7FC40,
.ioa_host_mask = 0x7FC28,
.ioa_host_mask_clr = 0x7FC28,
.host_ioa_intr = 0x00020,
.host_ioa_intr_clr = 0x00020,
.transop_timeout = 300
}
};
/*
* PCI device ids supported by pmcraid driver
*/
static struct pci_device_id pmcraid_pci_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_PMC, PCI_DEVICE_ID_PMC_MAXRAID),
0, 0, (kernel_ulong_t)&pmcraid_chip_cfg[0]
},
{}
};
MODULE_DEVICE_TABLE(pci, pmcraid_pci_table);
/**
* pmcraid_slave_alloc - Prepare for commands to a device
* @scsi_dev: scsi device struct
*
* This function is called by mid-layer prior to sending any command to the new
* device. Stores resource entry details of the device in scsi_device struct.
* Queuecommand uses the resource handle and other details to fill up IOARCB
* while sending commands to the device.
*
* Return value:
* 0 on success / -ENXIO if device does not exist
*/
static int pmcraid_slave_alloc(struct scsi_device *scsi_dev)
{
struct pmcraid_resource_entry *temp, *res = NULL;
struct pmcraid_instance *pinstance;
u8 target, bus, lun;
unsigned long lock_flags;
int rc = -ENXIO;
u16 fw_version;
pinstance = shost_priv(scsi_dev->host);
fw_version = be16_to_cpu(pinstance->inq_data->fw_version);
/* Driver exposes VSET and GSCSI resources only; all other device types
* are not exposed. Resource list is synchronized using resource lock
* so any traversal or modifications to the list should be done inside
* this lock
*/
spin_lock_irqsave(&pinstance->resource_lock, lock_flags);
list_for_each_entry(temp, &pinstance->used_res_q, queue) {
/* do not expose VSETs with order-ids > MAX_VSET_TARGETS */
if (RES_IS_VSET(temp->cfg_entry)) {
if (fw_version <= PMCRAID_FW_VERSION_1)
target = temp->cfg_entry.unique_flags1;
else
target = le16_to_cpu(temp->cfg_entry.array_id) & 0xFF;
if (target > PMCRAID_MAX_VSET_TARGETS)
continue;
bus = PMCRAID_VSET_BUS_ID;
lun = 0;
} else if (RES_IS_GSCSI(temp->cfg_entry)) {
target = RES_TARGET(temp->cfg_entry.resource_address);
bus = PMCRAID_PHYS_BUS_ID;
lun = RES_LUN(temp->cfg_entry.resource_address);
} else {
continue;
}
if (bus == scsi_dev->channel &&
target == scsi_dev->id &&
lun == scsi_dev->lun) {
res = temp;
break;
}
}
if (res) {
res->scsi_dev = scsi_dev;
scsi_dev->hostdata = res;
res->change_detected = 0;
atomic_set(&res->read_failures, 0);
atomic_set(&res->write_failures, 0);
rc = 0;
}
spin_unlock_irqrestore(&pinstance->resource_lock, lock_flags);
return rc;
}
/**
* pmcraid_slave_configure - Configures a SCSI device
* @scsi_dev: scsi device struct
*
* This function is executed by SCSI mid layer just after a device is first
* scanned (i.e. it has responded to an INQUIRY). For VSET resources, the
* timeout value (default 30s) will be over-written to a higher value (60s)
* and max_sectors value will be over-written to 512. It also sets queue depth
* to host->cmd_per_lun value
*
* Return value:
* 0 on success
*/
static int pmcraid_slave_configure(struct scsi_device *scsi_dev)
{
struct pmcraid_resource_entry *res = scsi_dev->hostdata;
if (!res)
return 0;
/* LLD exposes VSETs and Enclosure devices only */
if (RES_IS_GSCSI(res->cfg_entry) &&
scsi_dev->type != TYPE_ENCLOSURE)
return -ENXIO;
pmcraid_info("configuring %x:%x:%x:%x\n",
scsi_dev->host->unique_id,
scsi_dev->channel,
scsi_dev->id,
(u8)scsi_dev->lun);
if (RES_IS_GSCSI(res->cfg_entry)) {
scsi_dev->allow_restart = 1;
} else if (RES_IS_VSET(res->cfg_entry)) {
scsi_dev->allow_restart = 1;
blk_queue_rq_timeout(scsi_dev->request_queue,
PMCRAID_VSET_IO_TIMEOUT);
blk_queue_max_hw_sectors(scsi_dev->request_queue,
PMCRAID_VSET_MAX_SECTORS);
}
/*
* We never want to report TCQ support for these types of devices.
*/
if (!RES_IS_GSCSI(res->cfg_entry) && !RES_IS_VSET(res->cfg_entry))
scsi_dev->tagged_supported = 0;
return 0;
}
/**
* pmcraid_slave_destroy - Unconfigure a SCSI device before removing it
*
* @scsi_dev: scsi device struct
*
* This is called by mid-layer before removing a device. Pointer assignments
* done in pmcraid_slave_alloc will be reset to NULL here.
*
* Return value
* none
*/
static void pmcraid_slave_destroy(struct scsi_device *scsi_dev)
{
struct pmcraid_resource_entry *res;
res = (struct pmcraid_resource_entry *)scsi_dev->hostdata;
if (res)
res->scsi_dev = NULL;
scsi_dev->hostdata = NULL;
}
/**
* pmcraid_change_queue_depth - Change the device's queue depth
* @scsi_dev: scsi device struct
* @depth: depth to set
*
* Return value
* actual depth set
*/
static int pmcraid_change_queue_depth(struct scsi_device *scsi_dev, int depth)
{
if (depth > PMCRAID_MAX_CMD_PER_LUN)
depth = PMCRAID_MAX_CMD_PER_LUN;
return scsi_change_queue_depth(scsi_dev, depth);
}
/**
* pmcraid_init_cmdblk - initializes a command block
*
* @cmd: pointer to struct pmcraid_cmd to be initialized
* @index: if >=0 first time initialization; otherwise reinitialization
*
* Return Value
* None
*/
static void pmcraid_init_cmdblk(struct pmcraid_cmd *cmd, int index)
{
struct pmcraid_ioarcb *ioarcb = &(cmd->ioa_cb->ioarcb);
dma_addr_t dma_addr = cmd->ioa_cb_bus_addr;
if (index >= 0) {
/* first time initialization (called from probe) */
u32 ioasa_offset =
offsetof(struct pmcraid_control_block, ioasa);
cmd->index = index;
ioarcb->response_handle = cpu_to_le32(index << 2);
ioarcb->ioarcb_bus_addr = cpu_to_le64(dma_addr);
ioarcb->ioasa_bus_addr = cpu_to_le64(dma_addr + ioasa_offset);
ioarcb->ioasa_len = cpu_to_le16(sizeof(struct pmcraid_ioasa));
} else {
/* re-initialization of various lengths, called once command is
* processed by IOA
*/
memset(&cmd->ioa_cb->ioarcb.cdb, 0, PMCRAID_MAX_CDB_LEN);
ioarcb->hrrq_id = 0;
ioarcb->request_flags0 = 0;
ioarcb->request_flags1 = 0;
ioarcb->cmd_timeout = 0;
ioarcb->ioarcb_bus_addr &= cpu_to_le64(~0x1FULL);
ioarcb->ioadl_bus_addr = 0;
ioarcb->ioadl_length = 0;
ioarcb->data_transfer_length = 0;
ioarcb->add_cmd_param_length = 0;
ioarcb->add_cmd_param_offset = 0;
cmd->ioa_cb->ioasa.ioasc = 0;
cmd->ioa_cb->ioasa.residual_data_length = 0;
cmd->time_left = 0;
}
cmd->cmd_done = NULL;
cmd->scsi_cmd = NULL;
cmd->release = 0;
cmd->completion_req = 0;
cmd->sense_buffer = NULL;
cmd->sense_buffer_dma = 0;
cmd->dma_handle = 0;
timer_setup(&cmd->timer, NULL, 0);
}
/**
* pmcraid_reinit_cmdblk - reinitialize a command block
*
* @cmd: pointer to struct pmcraid_cmd to be reinitialized
*
* Return Value
* None
*/
static void pmcraid_reinit_cmdblk(struct pmcraid_cmd *cmd)
{
pmcraid_init_cmdblk(cmd, -1);
}
/**
* pmcraid_get_free_cmd - get a free cmd block from command block pool
* @pinstance: adapter instance structure
*
* Return Value:
* returns pointer to cmd block or NULL if no blocks are available
*/
static struct pmcraid_cmd *pmcraid_get_free_cmd(
struct pmcraid_instance *pinstance
)
{
struct pmcraid_cmd *cmd = NULL;
unsigned long lock_flags;
/* free cmd block list is protected by free_pool_lock */
spin_lock_irqsave(&pinstance->free_pool_lock, lock_flags);
if (!list_empty(&pinstance->free_cmd_pool)) {
cmd = list_entry(pinstance->free_cmd_pool.next,
struct pmcraid_cmd, free_list);
list_del(&cmd->free_list);
}
spin_unlock_irqrestore(&pinstance->free_pool_lock, lock_flags);
/* Initialize the command block before giving it the caller */
if (cmd != NULL)
pmcraid_reinit_cmdblk(cmd);
return cmd;
}
/**
* pmcraid_return_cmd - return a completed command block back into free pool
* @cmd: pointer to the command block
*
* Return Value:
* nothing
*/
static void pmcraid_return_cmd(struct pmcraid_cmd *cmd)
{
struct pmcraid_instance *pinstance = cmd->drv_inst;
unsigned long lock_flags;
spin_lock_irqsave(&pinstance->free_pool_lock, lock_flags);
list_add_tail(&cmd->free_list, &pinstance->free_cmd_pool);
spin_unlock_irqrestore(&pinstance->free_pool_lock, lock_flags);
}
/**
* pmcraid_read_interrupts - reads IOA interrupts
*
* @pinstance: pointer to adapter instance structure
*
* Return value
* interrupts read from IOA
*/
static u32 pmcraid_read_interrupts(struct pmcraid_instance *pinstance)
{
return (pinstance->interrupt_mode) ?
ioread32(pinstance->int_regs.ioa_host_msix_interrupt_reg) :
ioread32(pinstance->int_regs.ioa_host_interrupt_reg);
}
/**
* pmcraid_disable_interrupts - Masks and clears all specified interrupts
*
* @pinstance: pointer to per adapter instance structure
* @intrs: interrupts to disable
*
* Return Value
* None
*/
static void pmcraid_disable_interrupts(
struct pmcraid_instance *pinstance,
u32 intrs
)
{
u32 gmask = ioread32(pinstance->int_regs.global_interrupt_mask_reg);
u32 nmask = gmask | GLOBAL_INTERRUPT_MASK;
iowrite32(intrs, pinstance->int_regs.ioa_host_interrupt_clr_reg);
iowrite32(nmask, pinstance->int_regs.global_interrupt_mask_reg);
ioread32(pinstance->int_regs.global_interrupt_mask_reg);
if (!pinstance->interrupt_mode) {
iowrite32(intrs,
pinstance->int_regs.ioa_host_interrupt_mask_reg);
ioread32(pinstance->int_regs.ioa_host_interrupt_mask_reg);
}
}
/**
* pmcraid_enable_interrupts - Enables specified interrupts
*
* @pinstance: pointer to per adapter instance structure
* @intr: interrupts to enable
*
* Return Value
* None
*/
static void pmcraid_enable_interrupts(
struct pmcraid_instance *pinstance,
u32 intrs
)
{
u32 gmask = ioread32(pinstance->int_regs.global_interrupt_mask_reg);
u32 nmask = gmask & (~GLOBAL_INTERRUPT_MASK);
iowrite32(nmask, pinstance->int_regs.global_interrupt_mask_reg);
if (!pinstance->interrupt_mode) {
iowrite32(~intrs,
pinstance->int_regs.ioa_host_interrupt_mask_reg);
ioread32(pinstance->int_regs.ioa_host_interrupt_mask_reg);
}
pmcraid_info("enabled interrupts global mask = %x intr_mask = %x\n",
ioread32(pinstance->int_regs.global_interrupt_mask_reg),
ioread32(pinstance->int_regs.ioa_host_interrupt_mask_reg));
}
/**
* pmcraid_clr_trans_op - clear trans to op interrupt
*
* @pinstance: pointer to per adapter instance structure
*
* Return Value
* None
*/
static void pmcraid_clr_trans_op(
struct pmcraid_instance *pinstance
)
{
unsigned long lock_flags;
if (!pinstance->interrupt_mode) {
iowrite32(INTRS_TRANSITION_TO_OPERATIONAL,
pinstance->int_regs.ioa_host_interrupt_mask_reg);
ioread32(pinstance->int_regs.ioa_host_interrupt_mask_reg);
iowrite32(INTRS_TRANSITION_TO_OPERATIONAL,
pinstance->int_regs.ioa_host_interrupt_clr_reg);
ioread32(pinstance->int_regs.ioa_host_interrupt_clr_reg);
}
if (pinstance->reset_cmd != NULL) {
del_timer(&pinstance->reset_cmd->timer);
spin_lock_irqsave(
pinstance->host->host_lock, lock_flags);
pinstance->reset_cmd->cmd_done(pinstance->reset_cmd);
spin_unlock_irqrestore(
pinstance->host->host_lock, lock_flags);
}
}
/**
* pmcraid_reset_type - Determine the required reset type
* @pinstance: pointer to adapter instance structure
*
* IOA requires hard reset if any of the following conditions is true.
* 1. If HRRQ valid interrupt is not masked
* 2. IOA reset alert doorbell is set
* 3. If there are any error interrupts
*/
static void pmcraid_reset_type(struct pmcraid_instance *pinstance)
{
u32 mask;
u32 intrs;
u32 alerts;
mask = ioread32(pinstance->int_regs.ioa_host_interrupt_mask_reg);
intrs = ioread32(pinstance->int_regs.ioa_host_interrupt_reg);
alerts = ioread32(pinstance->int_regs.host_ioa_interrupt_reg);
if ((mask & INTRS_HRRQ_VALID) == 0 ||
(alerts & DOORBELL_IOA_RESET_ALERT) ||
(intrs & PMCRAID_ERROR_INTERRUPTS)) {
pmcraid_info("IOA requires hard reset\n");
pinstance->ioa_hard_reset = 1;
}
/* If unit check is active, trigger the dump */
if (intrs & INTRS_IOA_UNIT_CHECK)
pinstance->ioa_unit_check = 1;
}
/**
* pmcraid_bist_done - completion function for PCI BIST
* @cmd: pointer to reset command
* Return Value
* none
*/
static void pmcraid_ioa_reset(struct pmcraid_cmd *);
static void pmcraid_bist_done(struct timer_list *t)
{
struct pmcraid_cmd *cmd = from_timer(cmd, t, timer);
struct pmcraid_instance *pinstance = cmd->drv_inst;
unsigned long lock_flags;
int rc;
u16 pci_reg;
rc = pci_read_config_word(pinstance->pdev, PCI_COMMAND, &pci_reg);
/* If PCI config space can't be accessed wait for another two secs */
if ((rc != PCIBIOS_SUCCESSFUL || (!(pci_reg & PCI_COMMAND_MEMORY))) &&
cmd->time_left > 0) {
pmcraid_info("BIST not complete, waiting another 2 secs\n");
cmd->timer.expires = jiffies + cmd->time_left;
cmd->time_left = 0;
add_timer(&cmd->timer);
} else {
cmd->time_left = 0;
pmcraid_info("BIST is complete, proceeding with reset\n");
spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
pmcraid_ioa_reset(cmd);
spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
}
}
/**
* pmcraid_start_bist - starts BIST
* @cmd: pointer to reset cmd
* Return Value
* none
*/
static void pmcraid_start_bist(struct pmcraid_cmd *cmd)
{
struct pmcraid_instance *pinstance = cmd->drv_inst;
u32 doorbells, intrs;
/* proceed with bist and wait for 2 seconds */
iowrite32(DOORBELL_IOA_START_BIST,
pinstance->int_regs.host_ioa_interrupt_reg);
doorbells = ioread32(pinstance->int_regs.host_ioa_interrupt_reg);
intrs = ioread32(pinstance->int_regs.ioa_host_interrupt_reg);
pmcraid_info("doorbells after start bist: %x intrs: %x\n",
doorbells, intrs);
cmd->time_left = msecs_to_jiffies(PMCRAID_BIST_TIMEOUT);
cmd->timer.expires = jiffies + msecs_to_jiffies(PMCRAID_BIST_TIMEOUT);
cmd->timer.function = pmcraid_bist_done;
add_timer(&cmd->timer);
}
/**
* pmcraid_reset_alert_done - completion routine for reset_alert
* @cmd: pointer to command block used in reset sequence
* Return value
* None
*/
static void pmcraid_reset_alert_done(struct timer_list *t)
{
struct pmcraid_cmd *cmd = from_timer(cmd, t, timer);
struct pmcraid_instance *pinstance = cmd->drv_inst;
u32 status = ioread32(pinstance->ioa_status);
unsigned long lock_flags;
/* if the critical operation in progress bit is set or the wait times
* out, invoke reset engine to proceed with hard reset. If there is
* some more time to wait, restart the timer
*/
if (((status & INTRS_CRITICAL_OP_IN_PROGRESS) == 0) ||
cmd->time_left <= 0) {
pmcraid_info("critical op is reset proceeding with reset\n");
spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
pmcraid_ioa_reset(cmd);
spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
} else {
pmcraid_info("critical op is not yet reset waiting again\n");
/* restart timer if some more time is available to wait */
cmd->time_left -= PMCRAID_CHECK_FOR_RESET_TIMEOUT;
cmd->timer.expires = jiffies + PMCRAID_CHECK_FOR_RESET_TIMEOUT;
cmd->timer.function = pmcraid_reset_alert_done;
add_timer(&cmd->timer);
}
}
/**
* pmcraid_reset_alert - alerts IOA for a possible reset
* @cmd : command block to be used for reset sequence.
*
* Return Value
* returns 0 if pci config-space is accessible and RESET_DOORBELL is
* successfully written to IOA. Returns non-zero in case pci_config_space
* is not accessible
*/
static void pmcraid_notify_ioastate(struct pmcraid_instance *, u32);
static void pmcraid_reset_alert(struct pmcraid_cmd *cmd)
{
struct pmcraid_instance *pinstance = cmd->drv_inst;
u32 doorbells;
int rc;
u16 pci_reg;
/* If we are able to access IOA PCI config space, alert IOA that we are
* going to reset it soon. This enables IOA to preserv persistent error
* data if any. In case memory space is not accessible, proceed with
* BIST or slot_reset
*/
rc = pci_read_config_word(pinstance->pdev, PCI_COMMAND, &pci_reg);
if ((rc == PCIBIOS_SUCCESSFUL) && (pci_reg & PCI_COMMAND_MEMORY)) {
/* wait for IOA permission i.e until CRITICAL_OPERATION bit is
* reset IOA doesn't generate any interrupts when CRITICAL
* OPERATION bit is reset. A timer is started to wait for this
* bit to be reset.
*/
cmd->time_left = PMCRAID_RESET_TIMEOUT;
cmd->timer.expires = jiffies + PMCRAID_CHECK_FOR_RESET_TIMEOUT;
cmd->timer.function = pmcraid_reset_alert_done;
add_timer(&cmd->timer);
iowrite32(DOORBELL_IOA_RESET_ALERT,
pinstance->int_regs.host_ioa_interrupt_reg);
doorbells =
ioread32(pinstance->int_regs.host_ioa_interrupt_reg);
pmcraid_info("doorbells after reset alert: %x\n", doorbells);
} else {
pmcraid_info("PCI config is not accessible starting BIST\n");
pinstance->ioa_state = IOA_STATE_IN_HARD_RESET;
pmcraid_start_bist(cmd);
}
}
/**
* pmcraid_timeout_handler - Timeout handler for internally generated ops
*
* @cmd : pointer to command structure, that got timedout
*
* This function blocks host requests and initiates an adapter reset.
*
* Return value:
* None
*/
static void pmcraid_timeout_handler(struct timer_list *t)
{
struct pmcraid_cmd *cmd = from_timer(cmd, t, timer);
struct pmcraid_instance *pinstance = cmd->drv_inst;
unsigned long lock_flags;
dev_info(&pinstance->pdev->dev,
"Adapter being reset due to cmd(CDB[0] = %x) timeout\n",
cmd->ioa_cb->ioarcb.cdb[0]);
/* Command timeouts result in hard reset sequence. The command that got
* timed out may be the one used as part of reset sequence. In this
* case restart reset sequence using the same command block even if
* reset is in progress. Otherwise fail this command and get a free
* command block to restart the reset sequence.
*/
spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
if (!pinstance->ioa_reset_in_progress) {
pinstance->ioa_reset_attempts = 0;
cmd = pmcraid_get_free_cmd(pinstance);
/* If we are out of command blocks, just return here itself.
* Some other command's timeout handler can do the reset job
*/
if (cmd == NULL) {
spin_unlock_irqrestore(pinstance->host->host_lock,
lock_flags);
pmcraid_err("no free cmnd block for timeout handler\n");
return;
}
pinstance->reset_cmd = cmd;
pinstance->ioa_reset_in_progress = 1;
} else {
pmcraid_info("reset is already in progress\n");
if (pinstance->reset_cmd != cmd) {
/* This command should have been given to IOA, this
* command will be completed by fail_outstanding_cmds
* anyway
*/
pmcraid_err("cmd is pending but reset in progress\n");
}
/* If this command was being used as part of the reset
* sequence, set cmd_done pointer to pmcraid_ioa_reset. This
* causes fail_outstanding_commands not to return the command
* block back to free pool
*/
if (cmd == pinstance->reset_cmd)
cmd->cmd_done = pmcraid_ioa_reset;
}
/* Notify apps of important IOA bringup/bringdown sequences */
if (pinstance->scn.ioa_state != PMC_DEVICE_EVENT_RESET_START &&
pinstance->scn.ioa_state != PMC_DEVICE_EVENT_SHUTDOWN_START)
pmcraid_notify_ioastate(pinstance,
PMC_DEVICE_EVENT_RESET_START);
pinstance->ioa_state = IOA_STATE_IN_RESET_ALERT;
scsi_block_requests(pinstance->host);
pmcraid_reset_alert(cmd);
spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
}
/**
* pmcraid_internal_done - completion routine for internally generated cmds
*
* @cmd: command that got response from IOA
*
* Return Value:
* none
*/
static void pmcraid_internal_done(struct pmcraid_cmd *cmd)
{
pmcraid_info("response internal cmd CDB[0] = %x ioasc = %x\n",
cmd->ioa_cb->ioarcb.cdb[0],
le32_to_cpu(cmd->ioa_cb->ioasa.ioasc));
/* Some of the internal commands are sent with callers blocking for the
* response. Same will be indicated as part of cmd->completion_req
* field. Response path needs to wake up any waiters waiting for cmd
* completion if this flag is set.
*/
if (cmd->completion_req) {
cmd->completion_req = 0;
complete(&cmd->wait_for_completion);
}
/* most of the internal commands are completed by caller itself, so
* no need to return the command block back to free pool until we are
* required to do so (e.g once done with initialization).
*/
if (cmd->release) {
cmd->release = 0;
pmcraid_return_cmd(cmd);
}
}
/**
* pmcraid_reinit_cfgtable_done - done function for cfg table reinitialization
*
* @cmd: command that got response from IOA
*
* This routine is called after driver re-reads configuration table due to a
* lost CCN. It returns the command block back to free pool and schedules
* worker thread to add/delete devices into the system.
*
* Return Value:
* none
*/
static void pmcraid_reinit_cfgtable_done(struct pmcraid_cmd *cmd)
{
pmcraid_info("response internal cmd CDB[0] = %x ioasc = %x\n",
cmd->ioa_cb->ioarcb.cdb[0],
le32_to_cpu(cmd->ioa_cb->ioasa.ioasc));
if (cmd->release) {
cmd->release = 0;
pmcraid_return_cmd(cmd);
}
pmcraid_info("scheduling worker for config table reinitialization\n");
schedule_work(&cmd->drv_inst->worker_q);
}
/**
* pmcraid_erp_done - Process completion of SCSI error response from device
* @cmd: pmcraid_command
*
* This function copies the sense buffer into the scsi_cmd struct and completes
* scsi_cmd by calling scsi_done function.
*
* Return value:
* none
*/
static void pmcraid_erp_done(struct pmcraid_cmd *cmd)
{
struct scsi_cmnd *scsi_cmd = cmd->scsi_cmd;
struct pmcraid_instance *pinstance = cmd->drv_inst;
u32 ioasc = le32_to_cpu(cmd->ioa_cb->ioasa.ioasc);
if (PMCRAID_IOASC_SENSE_KEY(ioasc) > 0) {
scsi_cmd->result |= (DID_ERROR << 16);
scmd_printk(KERN_INFO, scsi_cmd,
"command CDB[0] = %x failed with IOASC: 0x%08X\n",
cmd->ioa_cb->ioarcb.cdb[0], ioasc);
}
if (cmd->sense_buffer) {
dma_unmap_single(&pinstance->pdev->dev, cmd->sense_buffer_dma,
SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE);
cmd->sense_buffer = NULL;
cmd->sense_buffer_dma = 0;
}
scsi_dma_unmap(scsi_cmd);
pmcraid_return_cmd(cmd);
scsi_cmd->scsi_done(scsi_cmd);
}
/**
* pmcraid_fire_command - sends an IOA command to adapter
*
* This function adds the given block into pending command list
* and returns without waiting
*
* @cmd : command to be sent to the device
*
* Return Value
* None
*/
static void _pmcraid_fire_command(struct pmcraid_cmd *cmd)
{
struct pmcraid_instance *pinstance = cmd->drv_inst;
unsigned long lock_flags;
/* Add this command block to pending cmd pool. We do this prior to
* writting IOARCB to ioarrin because IOA might complete the command
* by the time we are about to add it to the list. Response handler
* (isr/tasklet) looks for cmd block in the pending pending list.
*/
spin_lock_irqsave(&pinstance->pending_pool_lock, lock_flags);
list_add_tail(&cmd->free_list, &pinstance->pending_cmd_pool);
spin_unlock_irqrestore(&pinstance->pending_pool_lock, lock_flags);
atomic_inc(&pinstance->outstanding_cmds);
/* driver writes lower 32-bit value of IOARCB address only */
mb();
iowrite32(le64_to_cpu(cmd->ioa_cb->ioarcb.ioarcb_bus_addr), pinstance->ioarrin);
}
/**
* pmcraid_send_cmd - fires a command to IOA
*
* This function also sets up timeout function, and command completion
* function
*
* @cmd: pointer to the command block to be fired to IOA
* @cmd_done: command completion function, called once IOA responds
* @timeout: timeout to wait for this command completion
* @timeout_func: timeout handler
*
* Return value
* none
*/
static void pmcraid_send_cmd(
struct pmcraid_cmd *cmd,
void (*cmd_done) (struct pmcraid_cmd *),
unsigned long timeout,
void (*timeout_func) (struct timer_list *)
)
{
/* initialize done function */
cmd->cmd_done = cmd_done;
if (timeout_func) {
/* setup timeout handler */
cmd->timer.expires = jiffies + timeout;
cmd->timer.function = timeout_func;
add_timer(&cmd->timer);
}
/* fire the command to IOA */
_pmcraid_fire_command(cmd);
}
/**
* pmcraid_ioa_shutdown_done - completion function for IOA shutdown command
* @cmd: pointer to the command block used for sending IOA shutdown command
*
* Return value
* None
*/
static void pmcraid_ioa_shutdown_done(struct pmcraid_cmd *cmd)
{
struct pmcraid_instance *pinstance = cmd->drv_inst;
unsigned long lock_flags;
spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
pmcraid_ioa_reset(cmd);
spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
}
/**
* pmcraid_ioa_shutdown - sends SHUTDOWN command to ioa
*
* @cmd: pointer to the command block used as part of reset sequence
*
* Return Value
* None
*/
static void pmcraid_ioa_shutdown(struct pmcraid_cmd *cmd)
{
pmcraid_info("response for Cancel CCN CDB[0] = %x ioasc = %x\n",
cmd->ioa_cb->ioarcb.cdb[0],
le32_to_cpu(cmd->ioa_cb->ioasa.ioasc));
/* Note that commands sent during reset require next command to be sent
* to IOA. Hence reinit the done function as well as timeout function
*/
pmcraid_reinit_cmdblk(cmd);
cmd->ioa_cb->ioarcb.request_type = REQ_TYPE_IOACMD;
cmd->ioa_cb->ioarcb.resource_handle =
cpu_to_le32(PMCRAID_IOA_RES_HANDLE);
cmd->ioa_cb->ioarcb.cdb[0] = PMCRAID_IOA_SHUTDOWN;
cmd->ioa_cb->ioarcb.cdb[1] = PMCRAID_SHUTDOWN_NORMAL;
/* fire shutdown command to hardware. */
pmcraid_info("firing normal shutdown command (%d) to IOA\n",
le32_to_cpu(cmd->ioa_cb->ioarcb.response_handle));
pmcraid_notify_ioastate(cmd->drv_inst, PMC_DEVICE_EVENT_SHUTDOWN_START);
pmcraid_send_cmd(cmd, pmcraid_ioa_shutdown_done,
PMCRAID_SHUTDOWN_TIMEOUT,
pmcraid_timeout_handler);
}
/**
* pmcraid_get_fwversion_done - completion function for get_fwversion
*
* @cmd: pointer to command block used to send INQUIRY command
*
* Return Value
* none
*/
static void pmcraid_querycfg(struct pmcraid_cmd *);
static void pmcraid_get_fwversion_done(struct pmcraid_cmd *cmd)
{
struct pmcraid_instance *pinstance = cmd->drv_inst;
u32 ioasc = le32_to_cpu(cmd->ioa_cb->ioasa.ioasc);
unsigned long lock_flags;
/* configuration table entry size depends on firmware version. If fw
* version is not known, it is not possible to interpret IOA config
* table
*/
if (ioasc) {
pmcraid_err("IOA Inquiry failed with %x\n", ioasc);
spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
pinstance->ioa_state = IOA_STATE_IN_RESET_ALERT;
pmcraid_reset_alert(cmd);
spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
} else {
pmcraid_querycfg(cmd);
}
}
/**
* pmcraid_get_fwversion - reads firmware version information
*
* @cmd: pointer to command block used to send INQUIRY command
*
* Return Value
* none
*/
static void pmcraid_get_fwversion(struct pmcraid_cmd *cmd)
{
struct pmcraid_ioarcb *ioarcb = &cmd->ioa_cb->ioarcb;
struct pmcraid_ioadl_desc *ioadl;
struct pmcraid_instance *pinstance = cmd->drv_inst;
u16 data_size = sizeof(struct pmcraid_inquiry_data);
pmcraid_reinit_cmdblk(cmd);
ioarcb->request_type = REQ_TYPE_SCSI;
ioarcb->resource_handle = cpu_to_le32(PMCRAID_IOA_RES_HANDLE);
ioarcb->cdb[0] = INQUIRY;
ioarcb->cdb[1] = 1;
ioarcb->cdb[2] = 0xD0;
ioarcb->cdb[3] = (data_size >> 8) & 0xFF;
ioarcb->cdb[4] = data_size & 0xFF;
/* Since entire inquiry data it can be part of IOARCB itself
*/
ioarcb->ioadl_bus_addr = cpu_to_le64((cmd->ioa_cb_bus_addr) +
offsetof(struct pmcraid_ioarcb,
add_data.u.ioadl[0]));
ioarcb->ioadl_length = cpu_to_le32(sizeof(struct pmcraid_ioadl_desc));
ioarcb->ioarcb_bus_addr &= cpu_to_le64(~(0x1FULL));
ioarcb->request_flags0 |= NO_LINK_DESCS;
ioarcb->data_transfer_length = cpu_to_le32(data_size);
ioadl = &(ioarcb->add_data.u.ioadl[0]);
ioadl->flags = IOADL_FLAGS_LAST_DESC;
ioadl->address = cpu_to_le64(pinstance->inq_data_baddr);
ioadl->data_len = cpu_to_le32(data_size);
pmcraid_send_cmd(cmd, pmcraid_get_fwversion_done,
PMCRAID_INTERNAL_TIMEOUT, pmcraid_timeout_handler);
}
/**
* pmcraid_identify_hrrq - registers host rrq buffers with IOA
* @cmd: pointer to command block to be used for identify hrrq
*
* Return Value
* none
*/
static void pmcraid_identify_hrrq(struct pmcraid_cmd *cmd)
{
struct pmcraid_instance *pinstance = cmd->drv_inst;
struct pmcraid_ioarcb *ioarcb = &cmd->ioa_cb->ioarcb;
int index = cmd->hrrq_index;
__be64 hrrq_addr = cpu_to_be64(pinstance->hrrq_start_bus_addr[index]);
__be32 hrrq_size = cpu_to_be32(sizeof(u32) * PMCRAID_MAX_CMD);
void (*done_function)(struct pmcraid_cmd *);
pmcraid_reinit_cmdblk(cmd);
cmd->hrrq_index = index + 1;
if (cmd->hrrq_index < pinstance->num_hrrq) {
done_function = pmcraid_identify_hrrq;
} else {
cmd->hrrq_index = 0;
done_function = pmcraid_get_fwversion;
}
/* Initialize ioarcb */
ioarcb->request_type = REQ_TYPE_IOACMD;
ioarcb->resource_handle = cpu_to_le32(PMCRAID_IOA_RES_HANDLE);
/* initialize the hrrq number where IOA will respond to this command */
ioarcb->hrrq_id = index;
ioarcb->cdb[0] = PMCRAID_IDENTIFY_HRRQ;
ioarcb->cdb[1] = index;
/* IOA expects 64-bit pci address to be written in B.E format
* (i.e cdb[2]=MSByte..cdb[9]=LSB.
*/
pmcraid_info("HRRQ_IDENTIFY with hrrq:ioarcb:index => %llx:%llx:%x\n",
hrrq_addr, ioarcb->ioarcb_bus_addr, index);
memcpy(&(ioarcb->cdb[2]), &hrrq_addr, sizeof(hrrq_addr));
memcpy(&(ioarcb->cdb[10]), &hrrq_size, sizeof(hrrq_size));
/* Subsequent commands require HRRQ identification to be successful.
* Note that this gets called even during reset from SCSI mid-layer
* or tasklet
*/
pmcraid_send_cmd(cmd, done_function,
PMCRAID_INTERNAL_TIMEOUT,
pmcraid_timeout_handler);
}
static void pmcraid_process_ccn(struct pmcraid_cmd *cmd);
static void pmcraid_process_ldn(struct pmcraid_cmd *cmd);
/**
* pmcraid_send_hcam_cmd - send an initialized command block(HCAM) to IOA
*
* @cmd: initialized command block pointer
*
* Return Value
* none
*/
static void pmcraid_send_hcam_cmd(struct pmcraid_cmd *cmd)
{
if (cmd->ioa_cb->ioarcb.cdb[1] == PMCRAID_HCAM_CODE_CONFIG_CHANGE)
atomic_set(&(cmd->drv_inst->ccn.ignore), 0);
else
atomic_set(&(cmd->drv_inst->ldn.ignore), 0);
pmcraid_send_cmd(cmd, cmd->cmd_done, 0, NULL);
}
/**
* pmcraid_init_hcam - send an initialized command block(HCAM) to IOA
*
* @pinstance: pointer to adapter instance structure
* @type: HCAM type
*
* Return Value
* pointer to initialized pmcraid_cmd structure or NULL
*/
static struct pmcraid_cmd *pmcraid_init_hcam
(
struct pmcraid_instance *pinstance,
u8 type
)
{
struct pmcraid_cmd *cmd;
struct pmcraid_ioarcb *ioarcb;
struct pmcraid_ioadl_desc *ioadl;
struct pmcraid_hostrcb *hcam;
void (*cmd_done) (struct pmcraid_cmd *);
dma_addr_t dma;
int rcb_size;
cmd = pmcraid_get_free_cmd(pinstance);
if (!cmd) {
pmcraid_err("no free command blocks for hcam\n");
return cmd;
}
if (type == PMCRAID_HCAM_CODE_CONFIG_CHANGE) {
rcb_size = sizeof(struct pmcraid_hcam_ccn_ext);
cmd_done = pmcraid_process_ccn;
dma = pinstance->ccn.baddr + PMCRAID_AEN_HDR_SIZE;
hcam = &pinstance->ccn;
} else {
rcb_size = sizeof(struct pmcraid_hcam_ldn);
cmd_done = pmcraid_process_ldn;
dma = pinstance->ldn.baddr + PMCRAID_AEN_HDR_SIZE;
hcam = &pinstance->ldn;
}
/* initialize command pointer used for HCAM registration */
hcam->cmd = cmd;
ioarcb = &cmd->ioa_cb->ioarcb;
ioarcb->ioadl_bus_addr = cpu_to_le64((cmd->ioa_cb_bus_addr) +
offsetof(struct pmcraid_ioarcb,
add_data.u.ioadl[0]));
ioarcb->ioadl_length = cpu_to_le32(sizeof(struct pmcraid_ioadl_desc));
ioadl = ioarcb->add_data.u.ioadl;
/* Initialize ioarcb */
ioarcb->request_type = REQ_TYPE_HCAM;
ioarcb->resource_handle = cpu_to_le32(PMCRAID_IOA_RES_HANDLE);
ioarcb->cdb[0] = PMCRAID_HOST_CONTROLLED_ASYNC;
ioarcb->cdb[1] = type;
ioarcb->cdb[7] = (rcb_size >> 8) & 0xFF;
ioarcb->cdb[8] = (rcb_size) & 0xFF;
ioarcb->data_transfer_length = cpu_to_le32(rcb_size);
ioadl[0].flags |= IOADL_FLAGS_READ_LAST;
ioadl[0].data_len = cpu_to_le32(rcb_size);
ioadl[0].address = cpu_to_le64(dma);
cmd->cmd_done = cmd_done;
return cmd;
}
/**
* pmcraid_send_hcam - Send an HCAM to IOA
* @pinstance: ioa config struct
* @type: HCAM type
*
* This function will send a Host Controlled Async command to IOA.
*
* Return value:
* none
*/
static void pmcraid_send_hcam(struct pmcraid_instance *pinstance, u8 type)
{
struct pmcraid_cmd *cmd = pmcraid_init_hcam(pinstance, type);
pmcraid_send_hcam_cmd(cmd);
}
/**
* pmcraid_prepare_cancel_cmd - prepares a command block to abort another
*
* @cmd: pointer to cmd that is used as cancelling command
* @cmd_to_cancel: pointer to the command that needs to be cancelled
*/
static void pmcraid_prepare_cancel_cmd(
struct pmcraid_cmd *cmd,
struct pmcraid_cmd *cmd_to_cancel
)
{
struct pmcraid_ioarcb *ioarcb = &cmd->ioa_cb->ioarcb;
__be64 ioarcb_addr;
/* IOARCB address of the command to be cancelled is given in
* cdb[2]..cdb[9] is Big-Endian format. Note that length bits in
* IOARCB address are not masked.
*/
ioarcb_addr = cpu_to_be64(le64_to_cpu(cmd_to_cancel->ioa_cb->ioarcb.ioarcb_bus_addr));
/* Get the resource handle to where the command to be aborted has been
* sent.
*/
ioarcb->resource_handle = cmd_to_cancel->ioa_cb->ioarcb.resource_handle;
ioarcb->request_type = REQ_TYPE_IOACMD;
memset(ioarcb->cdb, 0, PMCRAID_MAX_CDB_LEN);
ioarcb->cdb[0] = PMCRAID_ABORT_CMD;
memcpy(&(ioarcb->cdb[2]), &ioarcb_addr, sizeof(ioarcb_addr));
}
/**
* pmcraid_cancel_hcam - sends ABORT task to abort a given HCAM
*
* @cmd: command to be used as cancelling command
* @type: HCAM type
* @cmd_done: op done function for the cancelling command
*/
static void pmcraid_cancel_hcam(
struct pmcraid_cmd *cmd,
u8 type,
void (*cmd_done) (struct pmcraid_cmd *)
)
{
struct pmcraid_instance *pinstance;
struct pmcraid_hostrcb *hcam;
pinstance = cmd->drv_inst;
hcam = (type == PMCRAID_HCAM_CODE_LOG_DATA) ?
&pinstance->ldn : &pinstance->ccn;
/* prepare for cancelling previous hcam command. If the HCAM is
* currently not pending with IOA, we would have hcam->cmd as non-null
*/
if (hcam->cmd == NULL)
return;
pmcraid_prepare_cancel_cmd(cmd, hcam->cmd);
/* writing to IOARRIN must be protected by host_lock, as mid-layer
* schedule queuecommand while we are doing this
*/
pmcraid_send_cmd(cmd, cmd_done,
PMCRAID_INTERNAL_TIMEOUT,
pmcraid_timeout_handler);
}
/**
* pmcraid_cancel_ccn - cancel CCN HCAM already registered with IOA
*
* @cmd: command block to be used for cancelling the HCAM
*/
static void pmcraid_cancel_ccn(struct pmcraid_cmd *cmd)
{
pmcraid_info("response for Cancel LDN CDB[0] = %x ioasc = %x\n",
cmd->ioa_cb->ioarcb.cdb[0],
le32_to_cpu(cmd->ioa_cb->ioasa.ioasc));
pmcraid_reinit_cmdblk(cmd);
pmcraid_cancel_hcam(cmd,
PMCRAID_HCAM_CODE_CONFIG_CHANGE,
pmcraid_ioa_shutdown);
}
/**
* pmcraid_cancel_ldn - cancel LDN HCAM already registered with IOA
*
* @cmd: command block to be used for cancelling the HCAM
*/
static void pmcraid_cancel_ldn(struct pmcraid_cmd *cmd)
{
pmcraid_cancel_hcam(cmd,
PMCRAID_HCAM_CODE_LOG_DATA,
pmcraid_cancel_ccn);
}
/**
* pmcraid_expose_resource - check if the resource can be exposed to OS
*
* @fw_version: firmware version code
* @cfgte: pointer to configuration table entry of the resource
*
* Return value:
* true if resource can be added to midlayer, false(0) otherwise
*/
static int pmcraid_expose_resource(u16 fw_version,
struct pmcraid_config_table_entry *cfgte)
{
int retval = 0;
if (cfgte->resource_type == RES_TYPE_VSET) {
if (fw_version <= PMCRAID_FW_VERSION_1)
retval = ((cfgte->unique_flags1 & 0x80) == 0);
else
retval = ((cfgte->unique_flags0 & 0x80) == 0 &&
(cfgte->unique_flags1 & 0x80) == 0);
} else if (cfgte->resource_type == RES_TYPE_GSCSI)
retval = (RES_BUS(cfgte->resource_address) !=
PMCRAID_VIRTUAL_ENCL_BUS_ID);
return retval;
}
/* attributes supported by pmcraid_event_family */
enum {
PMCRAID_AEN_ATTR_UNSPEC,
PMCRAID_AEN_ATTR_EVENT,
__PMCRAID_AEN_ATTR_MAX,
};
#define PMCRAID_AEN_ATTR_MAX (__PMCRAID_AEN_ATTR_MAX - 1)
/* commands supported by pmcraid_event_family */
enum {
PMCRAID_AEN_CMD_UNSPEC,
PMCRAID_AEN_CMD_EVENT,
__PMCRAID_AEN_CMD_MAX,
};
#define PMCRAID_AEN_CMD_MAX (__PMCRAID_AEN_CMD_MAX - 1)
static struct genl_multicast_group pmcraid_mcgrps[] = {
{ .name = "events", /* not really used - see ID discussion below */ },
};
static struct genl_family pmcraid_event_family __ro_after_init = {
.module = THIS_MODULE,
.name = "pmcraid",
.version = 1,
.maxattr = PMCRAID_AEN_ATTR_MAX,
.mcgrps = pmcraid_mcgrps,
.n_mcgrps = ARRAY_SIZE(pmcraid_mcgrps),
};
/**
* pmcraid_netlink_init - registers pmcraid_event_family
*
* Return value:
* 0 if the pmcraid_event_family is successfully registered
* with netlink generic, non-zero otherwise
*/
static int __init pmcraid_netlink_init(void)
{
int result;
result = genl_register_family(&pmcraid_event_family);
if (result)
return result;
pmcraid_info("registered NETLINK GENERIC group: %d\n",
pmcraid_event_family.id);
return result;
}
/**
* pmcraid_netlink_release - unregisters pmcraid_event_family
*
* Return value:
* none
*/
static void pmcraid_netlink_release(void)
{
genl_unregister_family(&pmcraid_event_family);
}
/**
* pmcraid_notify_aen - sends event msg to user space application
* @pinstance: pointer to adapter instance structure
* @type: HCAM type
*
* Return value:
* 0 if success, error value in case of any failure.
*/
static int pmcraid_notify_aen(
struct pmcraid_instance *pinstance,
struct pmcraid_aen_msg *aen_msg,
u32 data_size
)
{
struct sk_buff *skb;
void *msg_header;
u32 total_size, nla_genl_hdr_total_size;
int result;
aen_msg->hostno = (pinstance->host->unique_id << 16 |
MINOR(pinstance->cdev.dev));
aen_msg->length = data_size;
data_size += sizeof(*aen_msg);
total_size = nla_total_size(data_size);
/* Add GENL_HDR to total_size */
nla_genl_hdr_total_size =
(total_size + (GENL_HDRLEN +
((struct genl_family *)&pmcraid_event_family)->hdrsize)
+ NLMSG_HDRLEN);
skb = genlmsg_new(nla_genl_hdr_total_size, GFP_ATOMIC);
if (!skb) {
pmcraid_err("Failed to allocate aen data SKB of size: %x\n",
total_size);
return -ENOMEM;
}
/* add the genetlink message header */
msg_header = genlmsg_put(skb, 0, 0,
&pmcraid_event_family, 0,
PMCRAID_AEN_CMD_EVENT);
if (!msg_header) {
pmcraid_err("failed to copy command details\n");
nlmsg_free(skb);
return -ENOMEM;
}
result = nla_put(skb, PMCRAID_AEN_ATTR_EVENT, data_size, aen_msg);
if (result) {
pmcraid_err("failed to copy AEN attribute data\n");
nlmsg_free(skb);
return -EINVAL;
}
/* send genetlink multicast message to notify appplications */
genlmsg_end(skb, msg_header);
result = genlmsg_multicast(&pmcraid_event_family, skb,
0, 0, GFP_ATOMIC);
/* If there are no listeners, genlmsg_multicast may return non-zero
* value.
*/
if (result)
pmcraid_info("error (%x) sending aen event message\n", result);
return result;
}
/**
* pmcraid_notify_ccn - notifies about CCN event msg to user space
* @pinstance: pointer adapter instance structure
*
* Return value:
* 0 if success, error value in case of any failure
*/
static int pmcraid_notify_ccn(struct pmcraid_instance *pinstance)
{
return pmcraid_notify_aen(pinstance,
pinstance->ccn.msg,
le32_to_cpu(pinstance->ccn.hcam->data_len) +
sizeof(struct pmcraid_hcam_hdr));
}
/**
* pmcraid_notify_ldn - notifies about CCN event msg to user space
* @pinstance: pointer adapter instance structure
*
* Return value:
* 0 if success, error value in case of any failure
*/
static int pmcraid_notify_ldn(struct pmcraid_instance *pinstance)
{
return pmcraid_notify_aen(pinstance,
pinstance->ldn.msg,
le32_to_cpu(pinstance->ldn.hcam->data_len) +
sizeof(struct pmcraid_hcam_hdr));
}
/**
* pmcraid_notify_ioastate - sends IOA state event msg to user space
* @pinstance: pointer adapter instance structure
* @evt: controller state event to be sent
*
* Return value:
* 0 if success, error value in case of any failure
*/
static void pmcraid_notify_ioastate(struct pmcraid_instance *pinstance, u32 evt)
{
pinstance->scn.ioa_state = evt;
pmcraid_notify_aen(pinstance,
&pinstance->scn.msg,
sizeof(u32));
}
/**
* pmcraid_handle_config_change - Handle a config change from the adapter
* @pinstance: pointer to per adapter instance structure
*
* Return value:
* none
*/
static void pmcraid_handle_config_change(struct pmcraid_instance *pinstance)
{
struct pmcraid_config_table_entry *cfg_entry;
struct pmcraid_hcam_ccn *ccn_hcam;
struct pmcraid_cmd *cmd;
struct pmcraid_cmd *cfgcmd;
struct pmcraid_resource_entry *res = NULL;
unsigned long lock_flags;
unsigned long host_lock_flags;
u32 new_entry = 1;
u32 hidden_entry = 0;
u16 fw_version;
int rc;
ccn_hcam = (struct pmcraid_hcam_ccn *)pinstance->ccn.hcam;
cfg_entry = &ccn_hcam->cfg_entry;
fw_version = be16_to_cpu(pinstance->inq_data->fw_version);
pmcraid_info("CCN(%x): %x timestamp: %llx type: %x lost: %x flags: %x \
res: %x:%x:%x:%x\n",
le32_to_cpu(pinstance->ccn.hcam->ilid),
pinstance->ccn.hcam->op_code,
(le32_to_cpu(pinstance->ccn.hcam->timestamp1) |
((le32_to_cpu(pinstance->ccn.hcam->timestamp2) & 0xffffffffLL) << 32)),
pinstance->ccn.hcam->notification_type,
pinstance->ccn.hcam->notification_lost,
pinstance->ccn.hcam->flags,
pinstance->host->unique_id,
RES_IS_VSET(*cfg_entry) ? PMCRAID_VSET_BUS_ID :
(RES_IS_GSCSI(*cfg_entry) ? PMCRAID_PHYS_BUS_ID :
RES_BUS(cfg_entry->resource_address)),
RES_IS_VSET(*cfg_entry) ?
(fw_version <= PMCRAID_FW_VERSION_1 ?
cfg_entry->unique_flags1 :
le16_to_cpu(cfg_entry->array_id) & 0xFF) :
RES_TARGET(cfg_entry->resource_address),
RES_LUN(cfg_entry->resource_address));
/* If this HCAM indicates a lost notification, read the config table */
if (pinstance->ccn.hcam->notification_lost) {
cfgcmd = pmcraid_get_free_cmd(pinstance);
if (cfgcmd) {
pmcraid_info("lost CCN, reading config table\b");
pinstance->reinit_cfg_table = 1;
pmcraid_querycfg(cfgcmd);
} else {
pmcraid_err("lost CCN, no free cmd for querycfg\n");
}
goto out_notify_apps;
}
/* If this resource is not going to be added to mid-layer, just notify
* applications and return. If this notification is about hiding a VSET
* resource, check if it was exposed already.
*/
if (pinstance->ccn.hcam->notification_type ==
NOTIFICATION_TYPE_ENTRY_CHANGED &&
cfg_entry->resource_type == RES_TYPE_VSET) {
hidden_entry = (cfg_entry->unique_flags1 & 0x80) != 0;
} else if (!pmcraid_expose_resource(fw_version, cfg_entry)) {
goto out_notify_apps;
}
spin_lock_irqsave(&pinstance->resource_lock, lock_flags);
list_for_each_entry(res, &pinstance->used_res_q, queue) {
rc = memcmp(&res->cfg_entry.resource_address,
&cfg_entry->resource_address,
sizeof(cfg_entry->resource_address));
if (!rc) {
new_entry = 0;
break;
}
}
if (new_entry) {
if (hidden_entry) {
spin_unlock_irqrestore(&pinstance->resource_lock,
lock_flags);
goto out_notify_apps;
}
/* If there are more number of resources than what driver can
* manage, do not notify the applications about the CCN. Just
* ignore this notifications and re-register the same HCAM
*/
if (list_empty(&pinstance->free_res_q)) {
spin_unlock_irqrestore(&pinstance->resource_lock,
lock_flags);
pmcraid_err("too many resources attached\n");
spin_lock_irqsave(pinstance->host->host_lock,
host_lock_flags);
pmcraid_send_hcam(pinstance,
PMCRAID_HCAM_CODE_CONFIG_CHANGE);
spin_unlock_irqrestore(pinstance->host->host_lock,
host_lock_flags);
return;
}
res = list_entry(pinstance->free_res_q.next,
struct pmcraid_resource_entry, queue);
list_del(&res->queue);
res->scsi_dev = NULL;
res->reset_progress = 0;
list_add_tail(&res->queue, &pinstance->used_res_q);
}
memcpy(&res->cfg_entry, cfg_entry, pinstance->config_table_entry_size);
if (pinstance->ccn.hcam->notification_type ==
NOTIFICATION_TYPE_ENTRY_DELETED || hidden_entry) {
if (res->scsi_dev) {
if (fw_version <= PMCRAID_FW_VERSION_1)
res->cfg_entry.unique_flags1 &= 0x7F;
else
res->cfg_entry.array_id &= cpu_to_le16(0xFF);
res->change_detected = RES_CHANGE_DEL;
res->cfg_entry.resource_handle =
PMCRAID_INVALID_RES_HANDLE;
schedule_work(&pinstance->worker_q);
} else {
/* This may be one of the non-exposed resources */
list_move_tail(&res->queue, &pinstance->free_res_q);
}
} else if (!res->scsi_dev) {
res->change_detected = RES_CHANGE_ADD;
schedule_work(&pinstance->worker_q);
}
spin_unlock_irqrestore(&pinstance->resource_lock, lock_flags);
out_notify_apps:
/* Notify configuration changes to registered applications.*/
if (!pmcraid_disable_aen)
pmcraid_notify_ccn(pinstance);
cmd = pmcraid_init_hcam(pinstance, PMCRAID_HCAM_CODE_CONFIG_CHANGE);
if (cmd)
pmcraid_send_hcam_cmd(cmd);
}
/**
* pmcraid_get_error_info - return error string for an ioasc
* @ioasc: ioasc code
* Return Value
* none
*/
static struct pmcraid_ioasc_error *pmcraid_get_error_info(u32 ioasc)
{
int i;
for (i = 0; i < ARRAY_SIZE(pmcraid_ioasc_error_table); i++) {
if (pmcraid_ioasc_error_table[i].ioasc_code == ioasc)
return &pmcraid_ioasc_error_table[i];
}
return NULL;
}
/**
* pmcraid_ioasc_logger - log IOASC information based user-settings
* @ioasc: ioasc code
* @cmd: pointer to command that resulted in 'ioasc'
*/
static void pmcraid_ioasc_logger(u32 ioasc, struct pmcraid_cmd *cmd)
{
struct pmcraid_ioasc_error *error_info = pmcraid_get_error_info(ioasc);
if (error_info == NULL ||
cmd->drv_inst->current_log_level < error_info->log_level)
return;
/* log the error string */
pmcraid_err("cmd [%x] for resource %x failed with %x(%s)\n",
cmd->ioa_cb->ioarcb.cdb[0],
le32_to_cpu(cmd->ioa_cb->ioarcb.resource_handle),
ioasc, error_info->error_string);
}
/**
* pmcraid_handle_error_log - Handle a config change (error log) from the IOA
*
* @pinstance: pointer to per adapter instance structure
*
* Return value:
* none
*/
static void pmcraid_handle_error_log(struct pmcraid_instance *pinstance)
{
struct pmcraid_hcam_ldn *hcam_ldn;
u32 ioasc;
hcam_ldn = (struct pmcraid_hcam_ldn *)pinstance->ldn.hcam;
pmcraid_info
("LDN(%x): %x type: %x lost: %x flags: %x overlay id: %x\n",
pinstance->ldn.hcam->ilid,
pinstance->ldn.hcam->op_code,
pinstance->ldn.hcam->notification_type,
pinstance->ldn.hcam->notification_lost,
pinstance->ldn.hcam->flags,
pinstance->ldn.hcam->overlay_id);
/* log only the errors, no need to log informational log entries */
if (pinstance->ldn.hcam->notification_type !=
NOTIFICATION_TYPE_ERROR_LOG)
return;
if (pinstance->ldn.hcam->notification_lost ==
HOSTRCB_NOTIFICATIONS_LOST)
dev_info(&pinstance->pdev->dev, "Error notifications lost\n");
ioasc = le32_to_cpu(hcam_ldn->error_log.fd_ioasc);
if (ioasc == PMCRAID_IOASC_UA_BUS_WAS_RESET ||
ioasc == PMCRAID_IOASC_UA_BUS_WAS_RESET_BY_OTHER) {
dev_info(&pinstance->pdev->dev,
"UnitAttention due to IOA Bus Reset\n");
scsi_report_bus_reset(
pinstance->host,
RES_BUS(hcam_ldn->error_log.fd_ra));
}
return;
}
/**
* pmcraid_process_ccn - Op done function for a CCN.
* @cmd: pointer to command struct
*
* This function is the op done function for a configuration
* change notification
*
* Return value:
* none
*/
static void pmcraid_process_ccn(struct pmcraid_cmd *cmd)
{
struct pmcraid_instance *pinstance = cmd->drv_inst;
u32 ioasc = le32_to_cpu(cmd->ioa_cb->ioasa.ioasc);
unsigned long lock_flags;
pinstance->ccn.cmd = NULL;
pmcraid_return_cmd(cmd);
/* If driver initiated IOA reset happened while this hcam was pending
* with IOA, or IOA bringdown sequence is in progress, no need to
* re-register the hcam
*/
if (ioasc == PMCRAID_IOASC_IOA_WAS_RESET ||
atomic_read(&pinstance->ccn.ignore) == 1) {
return;
} else if (ioasc) {
dev_info(&pinstance->pdev->dev,
"Host RCB (CCN) failed with IOASC: 0x%08X\n", ioasc);
spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
pmcraid_send_hcam(pinstance, PMCRAID_HCAM_CODE_CONFIG_CHANGE);
spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
} else {
pmcraid_handle_config_change(pinstance);
}
}
/**
* pmcraid_process_ldn - op done function for an LDN
* @cmd: pointer to command block
*
* Return value
* none
*/
static void pmcraid_initiate_reset(struct pmcraid_instance *);
static void pmcraid_set_timestamp(struct pmcraid_cmd *cmd);
static void pmcraid_process_ldn(struct pmcraid_cmd *cmd)
{
struct pmcraid_instance *pinstance = cmd->drv_inst;
struct pmcraid_hcam_ldn *ldn_hcam =
(struct pmcraid_hcam_ldn *)pinstance->ldn.hcam;
u32 ioasc = le32_to_cpu(cmd->ioa_cb->ioasa.ioasc);
u32 fd_ioasc = le32_to_cpu(ldn_hcam->error_log.fd_ioasc);
unsigned long lock_flags;
/* return the command block back to freepool */
pinstance->ldn.cmd = NULL;
pmcraid_return_cmd(cmd);
/* If driver initiated IOA reset happened while this hcam was pending
* with IOA, no need to re-register the hcam as reset engine will do it
* once reset sequence is complete
*/
if (ioasc == PMCRAID_IOASC_IOA_WAS_RESET ||
atomic_read(&pinstance->ccn.ignore) == 1) {
return;
} else if (!ioasc) {
pmcraid_handle_error_log(pinstance);
if (fd_ioasc == PMCRAID_IOASC_NR_IOA_RESET_REQUIRED) {
spin_lock_irqsave(pinstance->host->host_lock,
lock_flags);
pmcraid_initiate_reset(pinstance);
spin_unlock_irqrestore(pinstance->host->host_lock,
lock_flags);
return;
}
if (fd_ioasc == PMCRAID_IOASC_TIME_STAMP_OUT_OF_SYNC) {
pinstance->timestamp_error = 1;
pmcraid_set_timestamp(cmd);
}
} else {
dev_info(&pinstance->pdev->dev,
"Host RCB(LDN) failed with IOASC: 0x%08X\n", ioasc);
}
/* send netlink message for HCAM notification if enabled */
if (!pmcraid_disable_aen)
pmcraid_notify_ldn(pinstance);
cmd = pmcraid_init_hcam(pinstance, PMCRAID_HCAM_CODE_LOG_DATA);
if (cmd)
pmcraid_send_hcam_cmd(cmd);
}
/**
* pmcraid_register_hcams - register HCAMs for CCN and LDN
*
* @pinstance: pointer per adapter instance structure
*
* Return Value
* none
*/
static void pmcraid_register_hcams(struct pmcraid_instance *pinstance)
{
pmcraid_send_hcam(pinstance, PMCRAID_HCAM_CODE_CONFIG_CHANGE);
pmcraid_send_hcam(pinstance, PMCRAID_HCAM_CODE_LOG_DATA);
}
/**
* pmcraid_unregister_hcams - cancel HCAMs registered already
* @cmd: pointer to command used as part of reset sequence
*/
static void pmcraid_unregister_hcams(struct pmcraid_cmd *cmd)
{
struct pmcraid_instance *pinstance = cmd->drv_inst;
/* During IOA bringdown, HCAM gets fired and tasklet proceeds with
* handling hcam response though it is not necessary. In order to
* prevent this, set 'ignore', so that bring-down sequence doesn't
* re-send any more hcams
*/
atomic_set(&pinstance->ccn.ignore, 1);
atomic_set(&pinstance->ldn.ignore, 1);
/* If adapter reset was forced as part of runtime reset sequence,
* start the reset sequence. Reset will be triggered even in case
* IOA unit_check.
*/
if ((pinstance->force_ioa_reset && !pinstance->ioa_bringdown) ||
pinstance->ioa_unit_check) {
pinstance->force_ioa_reset = 0;
pinstance->ioa_unit_check = 0;
pinstance->ioa_state = IOA_STATE_IN_RESET_ALERT;
pmcraid_reset_alert(cmd);
return;
}
/* Driver tries to cancel HCAMs by sending ABORT TASK for each HCAM
* one after the other. So CCN cancellation will be triggered by
* pmcraid_cancel_ldn itself.
*/
pmcraid_cancel_ldn(cmd);
}
/**
* pmcraid_reset_enable_ioa - re-enable IOA after a hard reset
* @pinstance: pointer to adapter instance structure
* Return Value
* 1 if TRANSITION_TO_OPERATIONAL is active, otherwise 0
*/
static void pmcraid_reinit_buffers(struct pmcraid_instance *);
static int pmcraid_reset_enable_ioa(struct pmcraid_instance *pinstance)
{
u32 intrs;
pmcraid_reinit_buffers(pinstance);
intrs = pmcraid_read_interrupts(pinstance);
pmcraid_enable_interrupts(pinstance, PMCRAID_PCI_INTERRUPTS);
if (intrs & INTRS_TRANSITION_TO_OPERATIONAL) {
if (!pinstance->interrupt_mode) {
iowrite32(INTRS_TRANSITION_TO_OPERATIONAL,
pinstance->int_regs.
ioa_host_interrupt_mask_reg);
iowrite32(INTRS_TRANSITION_TO_OPERATIONAL,
pinstance->int_regs.ioa_host_interrupt_clr_reg);
}
return 1;
} else {
return 0;
}
}
/**
* pmcraid_soft_reset - performs a soft reset and makes IOA become ready
* @cmd : pointer to reset command block
*
* Return Value
* none
*/
static void pmcraid_soft_reset(struct pmcraid_cmd *cmd)
{
struct pmcraid_instance *pinstance = cmd->drv_inst;
u32 int_reg;
u32 doorbell;
/* There will be an interrupt when Transition to Operational bit is
* set so tasklet would execute next reset task. The timeout handler
* would re-initiate a reset
*/
cmd->cmd_done = pmcraid_ioa_reset;
cmd->timer.expires = jiffies +
msecs_to_jiffies(PMCRAID_TRANSOP_TIMEOUT);
cmd->timer.function = pmcraid_timeout_handler;
if (!timer_pending(&cmd->timer))
add_timer(&cmd->timer);
/* Enable destructive diagnostics on IOA if it is not yet in
* operational state
*/
doorbell = DOORBELL_RUNTIME_RESET |
DOORBELL_ENABLE_DESTRUCTIVE_DIAGS;
/* Since we do RESET_ALERT and Start BIST we have to again write
* MSIX Doorbell to indicate the interrupt mode
*/
if (pinstance->interrupt_mode) {
iowrite32(DOORBELL_INTR_MODE_MSIX,
pinstance->int_regs.host_ioa_interrupt_reg);
ioread32(pinstance->int_regs.host_ioa_interrupt_reg);
}
iowrite32(doorbell, pinstance->int_regs.host_ioa_interrupt_reg);
ioread32(pinstance->int_regs.host_ioa_interrupt_reg),
int_reg = ioread32(pinstance->int_regs.ioa_host_interrupt_reg);
pmcraid_info("Waiting for IOA to become operational %x:%x\n",
ioread32(pinstance->int_regs.host_ioa_interrupt_reg),
int_reg);
}
/**
* pmcraid_get_dump - retrieves IOA dump in case of Unit Check interrupt
*
* @pinstance: pointer to adapter instance structure
*
* Return Value
* none
*/
static void pmcraid_get_dump(struct pmcraid_instance *pinstance)
{
pmcraid_info("%s is not yet implemented\n", __func__);
}
/**
* pmcraid_fail_outstanding_cmds - Fails all outstanding ops.
* @pinstance: pointer to adapter instance structure
*
* This function fails all outstanding ops. If they are submitted to IOA
* already, it sends cancel all messages if IOA is still accepting IOARCBs,
* otherwise just completes the commands and returns the cmd blocks to free
* pool.
*
* Return value:
* none
*/
static void pmcraid_fail_outstanding_cmds(struct pmcraid_instance *pinstance)
{
struct pmcraid_cmd *cmd, *temp;
unsigned long lock_flags;
/* pending command list is protected by pending_pool_lock. Its
* traversal must be done as within this lock
*/
spin_lock_irqsave(&pinstance->pending_pool_lock, lock_flags);
list_for_each_entry_safe(cmd, temp, &pinstance->pending_cmd_pool,
free_list) {
list_del(&cmd->free_list);
spin_unlock_irqrestore(&pinstance->pending_pool_lock,
lock_flags);
cmd->ioa_cb->ioasa.ioasc =
cpu_to_le32(PMCRAID_IOASC_IOA_WAS_RESET);
cmd->ioa_cb->ioasa.ilid =
cpu_to_le32(PMCRAID_DRIVER_ILID);
/* In case the command timer is still running */
del_timer(&cmd->timer);
/* If this is an IO command, complete it by invoking scsi_done
* function. If this is one of the internal commands other
* than pmcraid_ioa_reset and HCAM commands invoke cmd_done to
* complete it
*/
if (cmd->scsi_cmd) {
struct scsi_cmnd *scsi_cmd = cmd->scsi_cmd;
__le32 resp = cmd->ioa_cb->ioarcb.response_handle;
scsi_cmd->result |= DID_ERROR << 16;
scsi_dma_unmap(scsi_cmd);
pmcraid_return_cmd(cmd);
pmcraid_info("failing(%d) CDB[0] = %x result: %x\n",
le32_to_cpu(resp) >> 2,
cmd->ioa_cb->ioarcb.cdb[0],
scsi_cmd->result);
scsi_cmd->scsi_done(scsi_cmd);
} else if (cmd->cmd_done == pmcraid_internal_done ||
cmd->cmd_done == pmcraid_erp_done) {
cmd->cmd_done(cmd);
} else if (cmd->cmd_done != pmcraid_ioa_reset &&
cmd->cmd_done != pmcraid_ioa_shutdown_done) {
pmcraid_return_cmd(cmd);
}
atomic_dec(&pinstance->outstanding_cmds);
spin_lock_irqsave(&pinstance->pending_pool_lock, lock_flags);
}
spin_unlock_irqrestore(&pinstance->pending_pool_lock, lock_flags);
}
/**
* pmcraid_ioa_reset - Implementation of IOA reset logic
*
* @cmd: pointer to the cmd block to be used for entire reset process
*
* This function executes most of the steps required for IOA reset. This gets
* called by user threads (modprobe/insmod/rmmod) timer, tasklet and midlayer's
* 'eh_' thread. Access to variables used for controlling the reset sequence is
* synchronized using host lock. Various functions called during reset process
* would make use of a single command block, pointer to which is also stored in
* adapter instance structure.
*
* Return Value
* None
*/
static void pmcraid_ioa_reset(struct pmcraid_cmd *cmd)
{
struct pmcraid_instance *pinstance = cmd->drv_inst;
u8 reset_complete = 0;
pinstance->ioa_reset_in_progress = 1;
if (pinstance->reset_cmd != cmd) {
pmcraid_err("reset is called with different command block\n");
pinstance->reset_cmd = cmd;
}
pmcraid_info("reset_engine: state = %d, command = %p\n",
pinstance->ioa_state, cmd);
switch (pinstance->ioa_state) {
case IOA_STATE_DEAD:
/* If IOA is offline, whatever may be the reset reason, just
* return. callers might be waiting on the reset wait_q, wake
* up them
*/
pmcraid_err("IOA is offline no reset is possible\n");
reset_complete = 1;
break;
case IOA_STATE_IN_BRINGDOWN:
/* we enter here, once ioa shutdown command is processed by IOA
* Alert IOA for a possible reset. If reset alert fails, IOA
* goes through hard-reset
*/
pmcraid_disable_interrupts(pinstance, ~0);
pinstance->ioa_state = IOA_STATE_IN_RESET_ALERT;
pmcraid_reset_alert(cmd);
break;
case IOA_STATE_UNKNOWN:
/* We may be called during probe or resume. Some pre-processing
* is required for prior to reset
*/
scsi_block_requests(pinstance->host);
/* If asked to reset while IOA was processing responses or
* there are any error responses then IOA may require
* hard-reset.
*/
if (pinstance->ioa_hard_reset == 0) {
if (ioread32(pinstance->ioa_status) &
INTRS_TRANSITION_TO_OPERATIONAL) {
pmcraid_info("sticky bit set, bring-up\n");
pinstance->ioa_state = IOA_STATE_IN_BRINGUP;
pmcraid_reinit_cmdblk(cmd);
pmcraid_identify_hrrq(cmd);
} else {
pinstance->ioa_state = IOA_STATE_IN_SOFT_RESET;
pmcraid_soft_reset(cmd);
}
} else {
/* Alert IOA of a possible reset and wait for critical
* operation in progress bit to reset
*/
pinstance->ioa_state = IOA_STATE_IN_RESET_ALERT;
pmcraid_reset_alert(cmd);
}
break;
case IOA_STATE_IN_RESET_ALERT:
/* If critical operation in progress bit is reset or wait gets
* timed out, reset proceeds with starting BIST on the IOA.
* pmcraid_ioa_hard_reset keeps a count of reset attempts. If
* they are 3 or more, reset engine marks IOA dead and returns
*/
pinstance->ioa_state = IOA_STATE_IN_HARD_RESET;
pmcraid_start_bist(cmd);
break;
case IOA_STATE_IN_HARD_RESET:
pinstance->ioa_reset_attempts++;
/* retry reset if we haven't reached maximum allowed limit */
if (pinstance->ioa_reset_attempts > PMCRAID_RESET_ATTEMPTS) {
pinstance->ioa_reset_attempts = 0;
pmcraid_err("IOA didn't respond marking it as dead\n");
pinstance->ioa_state = IOA_STATE_DEAD;
if (pinstance->ioa_bringdown)
pmcraid_notify_ioastate(pinstance,
PMC_DEVICE_EVENT_SHUTDOWN_FAILED);
else
pmcraid_notify_ioastate(pinstance,
PMC_DEVICE_EVENT_RESET_FAILED);
reset_complete = 1;
break;
}
/* Once either bist or pci reset is done, restore PCI config
* space. If this fails, proceed with hard reset again
*/
pci_restore_state(pinstance->pdev);
/* fail all pending commands */
pmcraid_fail_outstanding_cmds(pinstance);
/* check if unit check is active, if so extract dump */
if (pinstance->ioa_unit_check) {
pmcraid_info("unit check is active\n");
pinstance->ioa_unit_check = 0;
pmcraid_get_dump(pinstance);
pinstance->ioa_reset_attempts--;
pinstance->ioa_state = IOA_STATE_IN_RESET_ALERT;
pmcraid_reset_alert(cmd);
break;
}
/* if the reset reason is to bring-down the ioa, we might be
* done with the reset restore pci_config_space and complete
* the reset
*/
if (pinstance->ioa_bringdown) {
pmcraid_info("bringing down the adapter\n");
pinstance->ioa_shutdown_type = SHUTDOWN_NONE;
pinstance->ioa_bringdown = 0;
pinstance->ioa_state = IOA_STATE_UNKNOWN;
pmcraid_notify_ioastate(pinstance,
PMC_DEVICE_EVENT_SHUTDOWN_SUCCESS);
reset_complete = 1;
} else {
/* bring-up IOA, so proceed with soft reset
* Reinitialize hrrq_buffers and their indices also
* enable interrupts after a pci_restore_state
*/
if (pmcraid_reset_enable_ioa(pinstance)) {
pinstance->ioa_state = IOA_STATE_IN_BRINGUP;
pmcraid_info("bringing up the adapter\n");
pmcraid_reinit_cmdblk(cmd);
pmcraid_identify_hrrq(cmd);
} else {
pinstance->ioa_state = IOA_STATE_IN_SOFT_RESET;
pmcraid_soft_reset(cmd);
}
}
break;
case IOA_STATE_IN_SOFT_RESET:
/* TRANSITION TO OPERATIONAL is on so start initialization
* sequence
*/
pmcraid_info("In softreset proceeding with bring-up\n");
pinstance->ioa_state = IOA_STATE_IN_BRINGUP;
/* Initialization commands start with HRRQ identification. From
* now on tasklet completes most of the commands as IOA is up
* and intrs are enabled
*/
pmcraid_identify_hrrq(cmd);
break;
case IOA_STATE_IN_BRINGUP:
/* we are done with bringing up of IOA, change the ioa_state to
* operational and wake up any waiters
*/
pinstance->ioa_state = IOA_STATE_OPERATIONAL;
reset_complete = 1;
break;
case IOA_STATE_OPERATIONAL:
default:
/* When IOA is operational and a reset is requested, check for
* the reset reason. If reset is to bring down IOA, unregister
* HCAMs and initiate shutdown; if adapter reset is forced then
* restart reset sequence again
*/
if (pinstance->ioa_shutdown_type == SHUTDOWN_NONE &&
pinstance->force_ioa_reset == 0) {
pmcraid_notify_ioastate(pinstance,
PMC_DEVICE_EVENT_RESET_SUCCESS);
reset_complete = 1;
} else {
if (pinstance->ioa_shutdown_type != SHUTDOWN_NONE)
pinstance->ioa_state = IOA_STATE_IN_BRINGDOWN;
pmcraid_reinit_cmdblk(cmd);
pmcraid_unregister_hcams(cmd);
}
break;
}
/* reset will be completed if ioa_state is either DEAD or UNKNOWN or
* OPERATIONAL. Reset all control variables used during reset, wake up
* any waiting threads and let the SCSI mid-layer send commands. Note
* that host_lock must be held before invoking scsi_report_bus_reset.
*/
if (reset_complete) {
pinstance->ioa_reset_in_progress = 0;
pinstance->ioa_reset_attempts = 0;
pinstance->reset_cmd = NULL;
pinstance->ioa_shutdown_type = SHUTDOWN_NONE;
pinstance->ioa_bringdown = 0;
pmcraid_return_cmd(cmd);
/* If target state is to bring up the adapter, proceed with
* hcam registration and resource exposure to mid-layer.
*/
if (pinstance->ioa_state == IOA_STATE_OPERATIONAL)
pmcraid_register_hcams(pinstance);
wake_up_all(&pinstance->reset_wait_q);
}
return;
}
/**
* pmcraid_initiate_reset - initiates reset sequence. This is called from
* ISR/tasklet during error interrupts including IOA unit check. If reset
* is already in progress, it just returns, otherwise initiates IOA reset
* to bring IOA up to operational state.
*
* @pinstance: pointer to adapter instance structure
*
* Return value
* none
*/
static void pmcraid_initiate_reset(struct pmcraid_instance *pinstance)
{
struct pmcraid_cmd *cmd;
/* If the reset is already in progress, just return, otherwise start
* reset sequence and return
*/
if (!pinstance->ioa_reset_in_progress) {
scsi_block_requests(pinstance->host);
cmd = pmcraid_get_free_cmd(pinstance);
if (cmd == NULL) {
pmcraid_err("no cmnd blocks for initiate_reset\n");
return;
}
pinstance->ioa_shutdown_type = SHUTDOWN_NONE;
pinstance->reset_cmd = cmd;
pinstance->force_ioa_reset = 1;
pmcraid_notify_ioastate(pinstance,
PMC_DEVICE_EVENT_RESET_START);
pmcraid_ioa_reset(cmd);
}
}
/**
* pmcraid_reset_reload - utility routine for doing IOA reset either to bringup
* or bringdown IOA
* @pinstance: pointer adapter instance structure
* @shutdown_type: shutdown type to be used NONE, NORMAL or ABRREV
* @target_state: expected target state after reset
*
* Note: This command initiates reset and waits for its completion. Hence this
* should not be called from isr/timer/tasklet functions (timeout handlers,
* error response handlers and interrupt handlers).
*
* Return Value
* 1 in case ioa_state is not target_state, 0 otherwise.
*/
static int pmcraid_reset_reload(
struct pmcraid_instance *pinstance,
u8 shutdown_type,
u8 target_state
)
{
struct pmcraid_cmd *reset_cmd = NULL;
unsigned long lock_flags;
int reset = 1;
spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
if (pinstance->ioa_reset_in_progress) {
pmcraid_info("reset_reload: reset is already in progress\n");
spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
wait_event(pinstance->reset_wait_q,
!pinstance->ioa_reset_in_progress);
spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
if (pinstance->ioa_state == IOA_STATE_DEAD) {
pmcraid_info("reset_reload: IOA is dead\n");
goto out_unlock;
}
if (pinstance->ioa_state == target_state) {
reset = 0;
goto out_unlock;
}
}
pmcraid_info("reset_reload: proceeding with reset\n");
scsi_block_requests(pinstance->host);
reset_cmd = pmcraid_get_free_cmd(pinstance);
if (reset_cmd == NULL) {
pmcraid_err("no free cmnd for reset_reload\n");
goto out_unlock;
}
if (shutdown_type == SHUTDOWN_NORMAL)
pinstance->ioa_bringdown = 1;
pinstance->ioa_shutdown_type = shutdown_type;
pinstance->reset_cmd = reset_cmd;
pinstance->force_ioa_reset = reset;
pmcraid_info("reset_reload: initiating reset\n");
pmcraid_ioa_reset(reset_cmd);
spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
pmcraid_info("reset_reload: waiting for reset to complete\n");
wait_event(pinstance->reset_wait_q,
!pinstance->ioa_reset_in_progress);
pmcraid_info("reset_reload: reset is complete !!\n");
scsi_unblock_requests(pinstance->host);
return pinstance->ioa_state != target_state;
out_unlock:
spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
return reset;
}
/**
* pmcraid_reset_bringdown - wrapper over pmcraid_reset_reload to bringdown IOA
*
* @pinstance: pointer to adapter instance structure
*
* Return Value
* whatever is returned from pmcraid_reset_reload
*/
static int pmcraid_reset_bringdown(struct pmcraid_instance *pinstance)
{
return pmcraid_reset_reload(pinstance,
SHUTDOWN_NORMAL,
IOA_STATE_UNKNOWN);
}
/**
* pmcraid_reset_bringup - wrapper over pmcraid_reset_reload to bring up IOA
*
* @pinstance: pointer to adapter instance structure
*
* Return Value
* whatever is returned from pmcraid_reset_reload
*/
static int pmcraid_reset_bringup(struct pmcraid_instance *pinstance)
{
pmcraid_notify_ioastate(pinstance, PMC_DEVICE_EVENT_RESET_START);
return pmcraid_reset_reload(pinstance,
SHUTDOWN_NONE,
IOA_STATE_OPERATIONAL);
}
/**
* pmcraid_request_sense - Send request sense to a device
* @cmd: pmcraid command struct
*
* This function sends a request sense to a device as a result of a check
* condition. This method re-uses the same command block that failed earlier.
*/
static void pmcraid_request_sense(struct pmcraid_cmd *cmd)
{
struct pmcraid_ioarcb *ioarcb = &cmd->ioa_cb->ioarcb;
struct pmcraid_ioadl_desc *ioadl = ioarcb->add_data.u.ioadl;
struct device *dev = &cmd->drv_inst->pdev->dev;
cmd->sense_buffer = cmd->scsi_cmd->sense_buffer;
cmd->sense_buffer_dma = dma_map_single(dev, cmd->sense_buffer,
SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE);
if (dma_mapping_error(dev, cmd->sense_buffer_dma)) {
pmcraid_err
("couldn't allocate sense buffer for request sense\n");
pmcraid_erp_done(cmd);
return;
}
/* re-use the command block */
memset(&cmd->ioa_cb->ioasa, 0, sizeof(struct pmcraid_ioasa));
memset(ioarcb->cdb, 0, PMCRAID_MAX_CDB_LEN);
ioarcb->request_flags0 = (SYNC_COMPLETE |
NO_LINK_DESCS |
INHIBIT_UL_CHECK);
ioarcb->request_type = REQ_TYPE_SCSI;
ioarcb->cdb[0] = REQUEST_SENSE;
ioarcb->cdb[4] = SCSI_SENSE_BUFFERSIZE;
ioarcb->ioadl_bus_addr = cpu_to_le64((cmd->ioa_cb_bus_addr) +
offsetof(struct pmcraid_ioarcb,
add_data.u.ioadl[0]));
ioarcb->ioadl_length = cpu_to_le32(sizeof(struct pmcraid_ioadl_desc));
ioarcb->data_transfer_length = cpu_to_le32(SCSI_SENSE_BUFFERSIZE);
ioadl->address = cpu_to_le64(cmd->sense_buffer_dma);
ioadl->data_len = cpu_to_le32(SCSI_SENSE_BUFFERSIZE);
ioadl->flags = IOADL_FLAGS_LAST_DESC;
/* request sense might be called as part of error response processing
* which runs in tasklets context. It is possible that mid-layer might
* schedule queuecommand during this time, hence, writting to IOARRIN
* must be protect by host_lock
*/
pmcraid_send_cmd(cmd, pmcraid_erp_done,
PMCRAID_REQUEST_SENSE_TIMEOUT,
pmcraid_timeout_handler);
}
/**
* pmcraid_cancel_all - cancel all outstanding IOARCBs as part of error recovery
* @cmd: command that failed
* @need_sense: true if request_sense is required after cancel all
*
* This function sends a cancel all to a device to clear the queue.
*/
static void pmcraid_cancel_all(struct pmcraid_cmd *cmd, bool need_sense)
{
struct scsi_cmnd *scsi_cmd = cmd->scsi_cmd;
struct pmcraid_ioarcb *ioarcb = &cmd->ioa_cb->ioarcb;
struct pmcraid_resource_entry *res = scsi_cmd->device->hostdata;
memset(ioarcb->cdb, 0, PMCRAID_MAX_CDB_LEN);
ioarcb->request_flags0 = SYNC_OVERRIDE;
ioarcb->request_type = REQ_TYPE_IOACMD;
ioarcb->cdb[0] = PMCRAID_CANCEL_ALL_REQUESTS;
if (RES_IS_GSCSI(res->cfg_entry))
ioarcb->cdb[1] = PMCRAID_SYNC_COMPLETE_AFTER_CANCEL;
ioarcb->ioadl_bus_addr = 0;
ioarcb->ioadl_length = 0;
ioarcb->data_transfer_length = 0;
ioarcb->ioarcb_bus_addr &= cpu_to_le64((~0x1FULL));
/* writing to IOARRIN must be protected by host_lock, as mid-layer
* schedule queuecommand while we are doing this
*/
pmcraid_send_cmd(cmd, need_sense ?
pmcraid_erp_done : pmcraid_request_sense,
PMCRAID_REQUEST_SENSE_TIMEOUT,
pmcraid_timeout_handler);
}
/**
* pmcraid_frame_auto_sense: frame fixed format sense information
*
* @cmd: pointer to failing command block
*
* Return value
* none
*/
static void pmcraid_frame_auto_sense(struct pmcraid_cmd *cmd)
{
u8 *sense_buf = cmd->scsi_cmd->sense_buffer;
struct pmcraid_resource_entry *res = cmd->scsi_cmd->device->hostdata;
struct pmcraid_ioasa *ioasa = &cmd->ioa_cb->ioasa;
u32 ioasc = le32_to_cpu(ioasa->ioasc);
u32 failing_lba = 0;
memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE);
cmd->scsi_cmd->result = SAM_STAT_CHECK_CONDITION;
if (RES_IS_VSET(res->cfg_entry) &&
ioasc == PMCRAID_IOASC_ME_READ_ERROR_NO_REALLOC &&
ioasa->u.vset.failing_lba_hi != 0) {
sense_buf[0] = 0x72;
sense_buf[1] = PMCRAID_IOASC_SENSE_KEY(ioasc);
sense_buf[2] = PMCRAID_IOASC_SENSE_CODE(ioasc);
sense_buf[3] = PMCRAID_IOASC_SENSE_QUAL(ioasc);
sense_buf[7] = 12;
sense_buf[8] = 0;
sense_buf[9] = 0x0A;
sense_buf[10] = 0x80;
failing_lba = le32_to_cpu(ioasa->u.vset.failing_lba_hi);
sense_buf[12] = (failing_lba & 0xff000000) >> 24;
sense_buf[13] = (failing_lba & 0x00ff0000) >> 16;
sense_buf[14] = (failing_lba & 0x0000ff00) >> 8;
sense_buf[15] = failing_lba & 0x000000ff;
failing_lba = le32_to_cpu(ioasa->u.vset.failing_lba_lo);
sense_buf[16] = (failing_lba & 0xff000000) >> 24;
sense_buf[17] = (failing_lba & 0x00ff0000) >> 16;
sense_buf[18] = (failing_lba & 0x0000ff00) >> 8;
sense_buf[19] = failing_lba & 0x000000ff;
} else {
sense_buf[0] = 0x70;
sense_buf[2] = PMCRAID_IOASC_SENSE_KEY(ioasc);
sense_buf[12] = PMCRAID_IOASC_SENSE_CODE(ioasc);
sense_buf[13] = PMCRAID_IOASC_SENSE_QUAL(ioasc);
if (ioasc == PMCRAID_IOASC_ME_READ_ERROR_NO_REALLOC) {
if (RES_IS_VSET(res->cfg_entry))
failing_lba =
le32_to_cpu(ioasa->u.
vset.failing_lba_lo);
sense_buf[0] |= 0x80;
sense_buf[3] = (failing_lba >> 24) & 0xff;
sense_buf[4] = (failing_lba >> 16) & 0xff;
sense_buf[5] = (failing_lba >> 8) & 0xff;
sense_buf[6] = failing_lba & 0xff;
}
sense_buf[7] = 6; /* additional length */
}
}
/**
* pmcraid_error_handler - Error response handlers for a SCSI op
* @cmd: pointer to pmcraid_cmd that has failed
*
* This function determines whether or not to initiate ERP on the affected
* device. This is called from a tasklet, which doesn't hold any locks.
*
* Return value:
* 0 it caller can complete the request, otherwise 1 where in error
* handler itself completes the request and returns the command block
* back to free-pool
*/
static int pmcraid_error_handler(struct pmcraid_cmd *cmd)
{
struct scsi_cmnd *scsi_cmd = cmd->scsi_cmd;
struct pmcraid_resource_entry *res = scsi_cmd->device->hostdata;
struct pmcraid_instance *pinstance = cmd->drv_inst;
struct pmcraid_ioasa *ioasa = &cmd->ioa_cb->ioasa;
u32 ioasc = le32_to_cpu(ioasa->ioasc);
u32 masked_ioasc = ioasc & PMCRAID_IOASC_SENSE_MASK;
bool sense_copied = false;
if (!res) {
pmcraid_info("resource pointer is NULL\n");
return 0;
}
/* If this was a SCSI read/write command keep count of errors */
if (SCSI_CMD_TYPE(scsi_cmd->cmnd[0]) == SCSI_READ_CMD)
atomic_inc(&res->read_failures);
else if (SCSI_CMD_TYPE(scsi_cmd->cmnd[0]) == SCSI_WRITE_CMD)
atomic_inc(&res->write_failures);
if (!RES_IS_GSCSI(res->cfg_entry) &&
masked_ioasc != PMCRAID_IOASC_HW_DEVICE_BUS_STATUS_ERROR) {
pmcraid_frame_auto_sense(cmd);
}
/* Log IOASC/IOASA information based on user settings */
pmcraid_ioasc_logger(ioasc, cmd);
switch (masked_ioasc) {
case PMCRAID_IOASC_AC_TERMINATED_BY_HOST:
scsi_cmd->result |= (DID_ABORT << 16);
break;
case PMCRAID_IOASC_IR_INVALID_RESOURCE_HANDLE:
case PMCRAID_IOASC_HW_CANNOT_COMMUNICATE:
scsi_cmd->result |= (DID_NO_CONNECT << 16);
break;
case PMCRAID_IOASC_NR_SYNC_REQUIRED:
res->sync_reqd = 1;
scsi_cmd->result |= (DID_IMM_RETRY << 16);
break;
case PMCRAID_IOASC_ME_READ_ERROR_NO_REALLOC:
scsi_cmd->result |= (DID_PASSTHROUGH << 16);
break;
case PMCRAID_IOASC_UA_BUS_WAS_RESET:
case PMCRAID_IOASC_UA_BUS_WAS_RESET_BY_OTHER:
if (!res->reset_progress)
scsi_report_bus_reset(pinstance->host,
scsi_cmd->device->channel);
scsi_cmd->result |= (DID_ERROR << 16);
break;
case PMCRAID_IOASC_HW_DEVICE_BUS_STATUS_ERROR:
scsi_cmd->result |= PMCRAID_IOASC_SENSE_STATUS(ioasc);
res->sync_reqd = 1;
/* if check_condition is not active return with error otherwise
* get/frame the sense buffer
*/
if (PMCRAID_IOASC_SENSE_STATUS(ioasc) !=
SAM_STAT_CHECK_CONDITION &&
PMCRAID_IOASC_SENSE_STATUS(ioasc) != SAM_STAT_ACA_ACTIVE)
return 0;
/* If we have auto sense data as part of IOASA pass it to
* mid-layer
*/
if (ioasa->auto_sense_length != 0) {
short sense_len = le16_to_cpu(ioasa->auto_sense_length);
int data_size = min_t(u16, sense_len,
SCSI_SENSE_BUFFERSIZE);
memcpy(scsi_cmd->sense_buffer,
ioasa->sense_data,
data_size);
sense_copied = true;
}
if (RES_IS_GSCSI(res->cfg_entry))
pmcraid_cancel_all(cmd, sense_copied);
else if (sense_copied)
pmcraid_erp_done(cmd);
else
pmcraid_request_sense(cmd);
return 1;
case PMCRAID_IOASC_NR_INIT_CMD_REQUIRED:
break;
default:
if (PMCRAID_IOASC_SENSE_KEY(ioasc) > RECOVERED_ERROR)
scsi_cmd->result |= (DID_ERROR << 16);
break;
}
return 0;
}
/**
* pmcraid_reset_device - device reset handler functions
*
* @scsi_cmd: scsi command struct
* @modifier: reset modifier indicating the reset sequence to be performed
*
* This function issues a device reset to the affected device.
* A LUN reset will be sent to the device first. If that does
* not work, a target reset will be sent.
*
* Return value:
* SUCCESS / FAILED
*/
static int pmcraid_reset_device(
struct scsi_cmnd *scsi_cmd,
unsigned long timeout,
u8 modifier
)
{
struct pmcraid_cmd *cmd;
struct pmcraid_instance *pinstance;
struct pmcraid_resource_entry *res;
struct pmcraid_ioarcb *ioarcb;
unsigned long lock_flags;
u32 ioasc;
pinstance =
(struct pmcraid_instance *)scsi_cmd->device->host->hostdata;
res = scsi_cmd->device->hostdata;
if (!res) {
sdev_printk(KERN_ERR, scsi_cmd->device,
"reset_device: NULL resource pointer\n");
return FAILED;
}
/* If adapter is currently going through reset/reload, return failed.
* This will force the mid-layer to call _eh_bus/host reset, which
* will then go to sleep and wait for the reset to complete
*/
spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
if (pinstance->ioa_reset_in_progress ||
pinstance->ioa_state == IOA_STATE_DEAD) {
spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
return FAILED;
}
res->reset_progress = 1;
pmcraid_info("Resetting %s resource with addr %x\n",
((modifier & RESET_DEVICE_LUN) ? "LUN" :
((modifier & RESET_DEVICE_TARGET) ? "TARGET" : "BUS")),
le32_to_cpu(res->cfg_entry.resource_address));
/* get a free cmd block */
cmd = pmcraid_get_free_cmd(pinstance);
if (cmd == NULL) {
spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
pmcraid_err("%s: no cmd blocks are available\n", __func__);
return FAILED;
}
ioarcb = &cmd->ioa_cb->ioarcb;
ioarcb->resource_handle = res->cfg_entry.resource_handle;
ioarcb->request_type = REQ_TYPE_IOACMD;
ioarcb->cdb[0] = PMCRAID_RESET_DEVICE;
/* Initialize reset modifier bits */
if (modifier)
modifier = ENABLE_RESET_MODIFIER | modifier;
ioarcb->cdb[1] = modifier;
init_completion(&cmd->wait_for_completion);
cmd->completion_req = 1;
pmcraid_info("cmd(CDB[0] = %x) for %x with index = %d\n",
cmd->ioa_cb->ioarcb.cdb[0],
le32_to_cpu(cmd->ioa_cb->ioarcb.resource_handle),
le32_to_cpu(cmd->ioa_cb->ioarcb.response_handle) >> 2);
pmcraid_send_cmd(cmd,
pmcraid_internal_done,
timeout,
pmcraid_timeout_handler);
spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
/* RESET_DEVICE command completes after all pending IOARCBs are
* completed. Once this command is completed, pmcraind_internal_done
* will wake up the 'completion' queue.
*/
wait_for_completion(&cmd->wait_for_completion);
/* complete the command here itself and return the command block
* to free list
*/
pmcraid_return_cmd(cmd);
res->reset_progress = 0;
ioasc = le32_to_cpu(cmd->ioa_cb->ioasa.ioasc);
/* set the return value based on the returned ioasc */
return PMCRAID_IOASC_SENSE_KEY(ioasc) ? FAILED : SUCCESS;
}
/**
* _pmcraid_io_done - helper for pmcraid_io_done function
*
* @cmd: pointer to pmcraid command struct
* @reslen: residual data length to be set in the ioasa
* @ioasc: ioasc either returned by IOA or set by driver itself.
*
* This function is invoked by pmcraid_io_done to complete mid-layer
* scsi ops.
*
* Return value:
* 0 if caller is required to return it to free_pool. Returns 1 if
* caller need not worry about freeing command block as error handler
* will take care of that.
*/
static int _pmcraid_io_done(struct pmcraid_cmd *cmd, int reslen, int ioasc)
{
struct scsi_cmnd *scsi_cmd = cmd->scsi_cmd;
int rc = 0;
scsi_set_resid(scsi_cmd, reslen);
pmcraid_info("response(%d) CDB[0] = %x ioasc:result: %x:%x\n",
le32_to_cpu(cmd->ioa_cb->ioarcb.response_handle) >> 2,
cmd->ioa_cb->ioarcb.cdb[0],
ioasc, scsi_cmd->result);
if (PMCRAID_IOASC_SENSE_KEY(ioasc) != 0)
rc = pmcraid_error_handler(cmd);
if (rc == 0) {
scsi_dma_unmap(scsi_cmd);
scsi_cmd->scsi_done(scsi_cmd);
}
return rc;
}
/**
* pmcraid_io_done - SCSI completion function
*
* @cmd: pointer to pmcraid command struct
*
* This function is invoked by tasklet/mid-layer error handler to completing
* the SCSI ops sent from mid-layer.
*
* Return value
* none
*/
static void pmcraid_io_done(struct pmcraid_cmd *cmd)
{
u32 ioasc = le32_to_cpu(cmd->ioa_cb->ioasa.ioasc);
u32 reslen = le32_to_cpu(cmd->ioa_cb->ioasa.residual_data_length);
if (_pmcraid_io_done(cmd, reslen, ioasc) == 0)
pmcraid_return_cmd(cmd);
}
/**
* pmcraid_abort_cmd - Aborts a single IOARCB already submitted to IOA
*
* @cmd: command block of the command to be aborted
*
* Return Value:
* returns pointer to command structure used as cancelling cmd
*/
static struct pmcraid_cmd *pmcraid_abort_cmd(struct pmcraid_cmd *cmd)
{
struct pmcraid_cmd *cancel_cmd;
struct pmcraid_instance *pinstance;
struct pmcraid_resource_entry *res;
pinstance = (struct pmcraid_instance *)cmd->drv_inst;
res = cmd->scsi_cmd->device->hostdata;
cancel_cmd = pmcraid_get_free_cmd(pinstance);
if (cancel_cmd == NULL) {
pmcraid_err("%s: no cmd blocks are available\n", __func__);
return NULL;
}
pmcraid_prepare_cancel_cmd(cancel_cmd, cmd);
pmcraid_info("aborting command CDB[0]= %x with index = %d\n",
cmd->ioa_cb->ioarcb.cdb[0],
le32_to_cpu(cmd->ioa_cb->ioarcb.response_handle) >> 2);
init_completion(&cancel_cmd->wait_for_completion);
cancel_cmd->completion_req = 1;
pmcraid_info("command (%d) CDB[0] = %x for %x\n",
le32_to_cpu(cancel_cmd->ioa_cb->ioarcb.response_handle) >> 2,
cancel_cmd->ioa_cb->ioarcb.cdb[0],
le32_to_cpu(cancel_cmd->ioa_cb->ioarcb.resource_handle));
pmcraid_send_cmd(cancel_cmd,
pmcraid_internal_done,
PMCRAID_INTERNAL_TIMEOUT,
pmcraid_timeout_handler);
return cancel_cmd;
}
/**
* pmcraid_abort_complete - Waits for ABORT TASK completion
*
* @cancel_cmd: command block use as cancelling command
*
* Return Value:
* returns SUCCESS if ABORT TASK has good completion
* otherwise FAILED
*/
static int pmcraid_abort_complete(struct pmcraid_cmd *cancel_cmd)
{
struct pmcraid_resource_entry *res;
u32 ioasc;
wait_for_completion(&cancel_cmd->wait_for_completion);
res = cancel_cmd->res;
cancel_cmd->res = NULL;
ioasc = le32_to_cpu(cancel_cmd->ioa_cb->ioasa.ioasc);
/* If the abort task is not timed out we will get a Good completion
* as sense_key, otherwise we may get one the following responses
* due to subsequent bus reset or device reset. In case IOASC is
* NR_SYNC_REQUIRED, set sync_reqd flag for the corresponding resource
*/
if (ioasc == PMCRAID_IOASC_UA_BUS_WAS_RESET ||
ioasc == PMCRAID_IOASC_NR_SYNC_REQUIRED) {
if (ioasc == PMCRAID_IOASC_NR_SYNC_REQUIRED)
res->sync_reqd = 1;
ioasc = 0;
}
/* complete the command here itself */
pmcraid_return_cmd(cancel_cmd);
return PMCRAID_IOASC_SENSE_KEY(ioasc) ? FAILED : SUCCESS;
}
/**
* pmcraid_eh_abort_handler - entry point for aborting a single task on errors
*
* @scsi_cmd: scsi command struct given by mid-layer. When this is called
* mid-layer ensures that no other commands are queued. This
* never gets called under interrupt, but a separate eh thread.
*
* Return value:
* SUCCESS / FAILED
*/
static int pmcraid_eh_abort_handler(struct scsi_cmnd *scsi_cmd)
{
struct pmcraid_instance *pinstance;
struct pmcraid_cmd *cmd;
struct pmcraid_resource_entry *res;
unsigned long host_lock_flags;
unsigned long pending_lock_flags;
struct pmcraid_cmd *cancel_cmd = NULL;
int cmd_found = 0;
int rc = FAILED;
pinstance =
(struct pmcraid_instance *)scsi_cmd->device->host->hostdata;
scmd_printk(KERN_INFO, scsi_cmd,
"I/O command timed out, aborting it.\n");
res = scsi_cmd->device->hostdata;
if (res == NULL)
return rc;
/* If we are currently going through reset/reload, return failed.
* This will force the mid-layer to eventually call
* pmcraid_eh_host_reset which will then go to sleep and wait for the
* reset to complete
*/
spin_lock_irqsave(pinstance->host->host_lock, host_lock_flags);
if (pinstance->ioa_reset_in_progress ||
pinstance->ioa_state == IOA_STATE_DEAD) {
spin_unlock_irqrestore(pinstance->host->host_lock,
host_lock_flags);
return rc;
}
/* loop over pending cmd list to find cmd corresponding to this
* scsi_cmd. Note that this command might not have been completed
* already. locking: all pending commands are protected with
* pending_pool_lock.
*/
spin_lock_irqsave(&pinstance->pending_pool_lock, pending_lock_flags);
list_for_each_entry(cmd, &pinstance->pending_cmd_pool, free_list) {
if (cmd->scsi_cmd == scsi_cmd) {
cmd_found = 1;
break;
}
}
spin_unlock_irqrestore(&pinstance->pending_pool_lock,
pending_lock_flags);
/* If the command to be aborted was given to IOA and still pending with
* it, send ABORT_TASK to abort this and wait for its completion
*/
if (cmd_found)
cancel_cmd = pmcraid_abort_cmd(cmd);
spin_unlock_irqrestore(pinstance->host->host_lock,
host_lock_flags);
if (cancel_cmd) {
cancel_cmd->res = cmd->scsi_cmd->device->hostdata;
rc = pmcraid_abort_complete(cancel_cmd);
}
return cmd_found ? rc : SUCCESS;
}
/**
* pmcraid_eh_xxxx_reset_handler - bus/target/device reset handler callbacks
*
* @scmd: pointer to scsi_cmd that was sent to the resource to be reset.
*
* All these routines invokve pmcraid_reset_device with appropriate parameters.
* Since these are called from mid-layer EH thread, no other IO will be queued
* to the resource being reset. However, control path (IOCTL) may be active so
* it is necessary to synchronize IOARRIN writes which pmcraid_reset_device
* takes care by locking/unlocking host_lock.
*
* Return value
* SUCCESS or FAILED
*/
static int pmcraid_eh_device_reset_handler(struct scsi_cmnd *scmd)
{
scmd_printk(KERN_INFO, scmd,
"resetting device due to an I/O command timeout.\n");
return pmcraid_reset_device(scmd,
PMCRAID_INTERNAL_TIMEOUT,
RESET_DEVICE_LUN);
}
static int pmcraid_eh_bus_reset_handler(struct scsi_cmnd *scmd)
{
scmd_printk(KERN_INFO, scmd,
"Doing bus reset due to an I/O command timeout.\n");
return pmcraid_reset_device(scmd,
PMCRAID_RESET_BUS_TIMEOUT,
RESET_DEVICE_BUS);
}
static int pmcraid_eh_target_reset_handler(struct scsi_cmnd *scmd)
{
scmd_printk(KERN_INFO, scmd,
"Doing target reset due to an I/O command timeout.\n");
return pmcraid_reset_device(scmd,
PMCRAID_INTERNAL_TIMEOUT,
RESET_DEVICE_TARGET);
}
/**
* pmcraid_eh_host_reset_handler - adapter reset handler callback
*
* @scmd: pointer to scsi_cmd that was sent to a resource of adapter
*
* Initiates adapter reset to bring it up to operational state
*
* Return value
* SUCCESS or FAILED
*/
static int pmcraid_eh_host_reset_handler(struct scsi_cmnd *scmd)
{
unsigned long interval = 10000; /* 10 seconds interval */
int waits = jiffies_to_msecs(PMCRAID_RESET_HOST_TIMEOUT) / interval;
struct pmcraid_instance *pinstance =
(struct pmcraid_instance *)(scmd->device->host->hostdata);
/* wait for an additional 150 seconds just in case firmware could come
* up and if it could complete all the pending commands excluding the
* two HCAM (CCN and LDN).
*/
while (waits--) {
if (atomic_read(&pinstance->outstanding_cmds) <=
PMCRAID_MAX_HCAM_CMD)
return SUCCESS;
msleep(interval);
}
dev_err(&pinstance->pdev->dev,
"Adapter being reset due to an I/O command timeout.\n");
return pmcraid_reset_bringup(pinstance) == 0 ? SUCCESS : FAILED;
}
/**
* pmcraid_init_ioadls - initializes IOADL related fields in IOARCB
* @cmd: pmcraid command struct
* @sgcount: count of scatter-gather elements
*
* Return value
* returns pointer pmcraid_ioadl_desc, initialized to point to internal
* or external IOADLs
*/
static struct pmcraid_ioadl_desc *
pmcraid_init_ioadls(struct pmcraid_cmd *cmd, int sgcount)
{
struct pmcraid_ioadl_desc *ioadl;
struct pmcraid_ioarcb *ioarcb = &cmd->ioa_cb->ioarcb;
int ioadl_count = 0;
if (ioarcb->add_cmd_param_length)
ioadl_count = DIV_ROUND_UP(le16_to_cpu(ioarcb->add_cmd_param_length), 16);
ioarcb->ioadl_length = cpu_to_le32(sizeof(struct pmcraid_ioadl_desc) * sgcount);
if ((sgcount + ioadl_count) > (ARRAY_SIZE(ioarcb->add_data.u.ioadl))) {
/* external ioadls start at offset 0x80 from control_block
* structure, re-using 24 out of 27 ioadls part of IOARCB.
* It is necessary to indicate to firmware that driver is
* using ioadls to be treated as external to IOARCB.
*/
ioarcb->ioarcb_bus_addr &= cpu_to_le64(~(0x1FULL));
ioarcb->ioadl_bus_addr =
cpu_to_le64((cmd->ioa_cb_bus_addr) +
offsetof(struct pmcraid_ioarcb,
add_data.u.ioadl[3]));
ioadl = &ioarcb->add_data.u.ioadl[3];
} else {
ioarcb->ioadl_bus_addr =
cpu_to_le64((cmd->ioa_cb_bus_addr) +
offsetof(struct pmcraid_ioarcb,
add_data.u.ioadl[ioadl_count]));
ioadl = &ioarcb->add_data.u.ioadl[ioadl_count];
ioarcb->ioarcb_bus_addr |=
cpu_to_le64(DIV_ROUND_CLOSEST(sgcount + ioadl_count, 8));
}
return ioadl;
}
/**
* pmcraid_build_ioadl - Build a scatter/gather list and map the buffer
* @pinstance: pointer to adapter instance structure
* @cmd: pmcraid command struct
*
* This function is invoked by queuecommand entry point while sending a command
* to firmware. This builds ioadl descriptors and sets up ioarcb fields.
*
* Return value:
* 0 on success or -1 on failure
*/
static int pmcraid_build_ioadl(
struct pmcraid_instance *pinstance,
struct pmcraid_cmd *cmd
)
{
int i, nseg;
struct scatterlist *sglist;
struct scsi_cmnd *scsi_cmd = cmd->scsi_cmd;
struct pmcraid_ioarcb *ioarcb = &(cmd->ioa_cb->ioarcb);
struct pmcraid_ioadl_desc *ioadl;
u32 length = scsi_bufflen(scsi_cmd);
if (!length)
return 0;
nseg = scsi_dma_map(scsi_cmd);
if (nseg < 0) {
scmd_printk(KERN_ERR, scsi_cmd, "scsi_map_dma failed!\n");
return -1;
} else if (nseg > PMCRAID_MAX_IOADLS) {
scsi_dma_unmap(scsi_cmd);
scmd_printk(KERN_ERR, scsi_cmd,
"sg count is (%d) more than allowed!\n", nseg);
return -1;
}
/* Initialize IOARCB data transfer length fields */
if (scsi_cmd->sc_data_direction == DMA_TO_DEVICE)
ioarcb->request_flags0 |= TRANSFER_DIR_WRITE;
ioarcb->request_flags0 |= NO_LINK_DESCS;
ioarcb->data_transfer_length = cpu_to_le32(length);
ioadl = pmcraid_init_ioadls(cmd, nseg);
/* Initialize IOADL descriptor addresses */
scsi_for_each_sg(scsi_cmd, sglist, nseg, i) {
ioadl[i].data_len = cpu_to_le32(sg_dma_len(sglist));
ioadl[i].address = cpu_to_le64(sg_dma_address(sglist));
ioadl[i].flags = 0;
}
/* setup last descriptor */
ioadl[i - 1].flags = IOADL_FLAGS_LAST_DESC;
return 0;
}
/**
* pmcraid_free_sglist - Frees an allocated SG buffer list
* @sglist: scatter/gather list pointer
*
* Free a DMA'able memory previously allocated with pmcraid_alloc_sglist
*
* Return value:
* none
*/
static void pmcraid_free_sglist(struct pmcraid_sglist *sglist)
{
sgl_free_order(sglist->scatterlist, sglist->order);
kfree(sglist);
}
/**
* pmcraid_alloc_sglist - Allocates memory for a SG list
* @buflen: buffer length
*
* Allocates a DMA'able buffer in chunks and assembles a scatter/gather
* list.
*
* Return value
* pointer to sglist / NULL on failure
*/
static struct pmcraid_sglist *pmcraid_alloc_sglist(int buflen)
{
struct pmcraid_sglist *sglist;
int sg_size;
int order;
sg_size = buflen / (PMCRAID_MAX_IOADLS - 1);
order = (sg_size > 0) ? get_order(sg_size) : 0;
/* Allocate a scatter/gather list for the DMA */
sglist = kzalloc(sizeof(struct pmcraid_sglist), GFP_KERNEL);
if (sglist == NULL)
return NULL;
sglist->order = order;
sgl_alloc_order(buflen, order, false,
GFP_KERNEL | GFP_DMA | __GFP_ZERO, &sglist->num_sg);
return sglist;
}
/**
* pmcraid_copy_sglist - Copy user buffer to kernel buffer's SG list
* @sglist: scatter/gather list pointer
* @buffer: buffer pointer
* @len: buffer length
* @direction: data transfer direction
*
* Copy a user buffer into a buffer allocated by pmcraid_alloc_sglist
*
* Return value:
* 0 on success / other on failure
*/
static int pmcraid_copy_sglist(
struct pmcraid_sglist *sglist,
void __user *buffer,
u32 len,
int direction
)
{
struct scatterlist *sg;
void *kaddr;
int bsize_elem;
int i;
int rc = 0;
/* Determine the actual number of bytes per element */
bsize_elem = PAGE_SIZE * (1 << sglist->order);
sg = sglist->scatterlist;
for (i = 0; i < (len / bsize_elem); i++, sg = sg_next(sg), buffer += bsize_elem) {
struct page *page = sg_page(sg);
kaddr = kmap(page);
if (direction == DMA_TO_DEVICE)
rc = copy_from_user(kaddr, buffer, bsize_elem);
else
rc = copy_to_user(buffer, kaddr, bsize_elem);
kunmap(page);
if (rc) {
pmcraid_err("failed to copy user data into sg list\n");
return -EFAULT;
}
sg->length = bsize_elem;
}
if (len % bsize_elem) {
struct page *page = sg_page(sg);
kaddr = kmap(page);
if (direction == DMA_TO_DEVICE)
rc = copy_from_user(kaddr, buffer, len % bsize_elem);
else
rc = copy_to_user(buffer, kaddr, len % bsize_elem);
kunmap(page);
sg->length = len % bsize_elem;
}
if (rc) {
pmcraid_err("failed to copy user data into sg list\n");
rc = -EFAULT;
}
return rc;
}
/**
* pmcraid_queuecommand - Queue a mid-layer request
* @scsi_cmd: scsi command struct
* @done: done function
*
* This function queues a request generated by the mid-layer. Midlayer calls
* this routine within host->lock. Some of the functions called by queuecommand
* would use cmd block queue locks (free_pool_lock and pending_pool_lock)
*
* Return value:
* 0 on success
* SCSI_MLQUEUE_DEVICE_BUSY if device is busy
* SCSI_MLQUEUE_HOST_BUSY if host is busy
*/
static int pmcraid_queuecommand_lck(
struct scsi_cmnd *scsi_cmd,
void (*done) (struct scsi_cmnd *)
)
{
struct pmcraid_instance *pinstance;
struct pmcraid_resource_entry *res;
struct pmcraid_ioarcb *ioarcb;
struct pmcraid_cmd *cmd;
u32 fw_version;
int rc = 0;
pinstance =
(struct pmcraid_instance *)scsi_cmd->device->host->hostdata;
fw_version = be16_to_cpu(pinstance->inq_data->fw_version);
scsi_cmd->scsi_done = done;
res = scsi_cmd->device->hostdata;
scsi_cmd->result = (DID_OK << 16);
/* if adapter is marked as dead, set result to DID_NO_CONNECT complete
* the command
*/
if (pinstance->ioa_state == IOA_STATE_DEAD) {
pmcraid_info("IOA is dead, but queuecommand is scheduled\n");
scsi_cmd->result = (DID_NO_CONNECT << 16);
scsi_cmd->scsi_done(scsi_cmd);
return 0;
}
/* If IOA reset is in progress, can't queue the commands */
if (pinstance->ioa_reset_in_progress)
return SCSI_MLQUEUE_HOST_BUSY;
/* Firmware doesn't support SYNCHRONIZE_CACHE command (0x35), complete
* the command here itself with success return
*/
if (scsi_cmd->cmnd[0] == SYNCHRONIZE_CACHE) {
pmcraid_info("SYNC_CACHE(0x35), completing in driver itself\n");
scsi_cmd->scsi_done(scsi_cmd);
return 0;
}
/* initialize the command and IOARCB to be sent to IOA */
cmd = pmcraid_get_free_cmd(pinstance);
if (cmd == NULL) {
pmcraid_err("free command block is not available\n");
return SCSI_MLQUEUE_HOST_BUSY;
}
cmd->scsi_cmd = scsi_cmd;
ioarcb = &(cmd->ioa_cb->ioarcb);
memcpy(ioarcb->cdb, scsi_cmd->cmnd, scsi_cmd->cmd_len);
ioarcb->resource_handle = res->cfg_entry.resource_handle;
ioarcb->request_type = REQ_TYPE_SCSI;
/* set hrrq number where the IOA should respond to. Note that all cmds
* generated internally uses hrrq_id 0, exception to this is the cmd
* block of scsi_cmd which is re-used (e.g. cancel/abort), which uses
* hrrq_id assigned here in queuecommand
*/
ioarcb->hrrq_id = atomic_add_return(1, &(pinstance->last_message_id)) %
pinstance->num_hrrq;
cmd->cmd_done = pmcraid_io_done;
if (RES_IS_GSCSI(res->cfg_entry) || RES_IS_VSET(res->cfg_entry)) {
if (scsi_cmd->underflow == 0)
ioarcb->request_flags0 |= INHIBIT_UL_CHECK;
if (res->sync_reqd) {
ioarcb->request_flags0 |= SYNC_COMPLETE;
res->sync_reqd = 0;
}
ioarcb->request_flags0 |= NO_LINK_DESCS;
if (scsi_cmd->flags & SCMD_TAGGED)
ioarcb->request_flags1 |= TASK_TAG_SIMPLE;
if (RES_IS_GSCSI(res->cfg_entry))
ioarcb->request_flags1 |= DELAY_AFTER_RESET;
}
rc = pmcraid_build_ioadl(pinstance, cmd);
pmcraid_info("command (%d) CDB[0] = %x for %x:%x:%x:%x\n",
le32_to_cpu(ioarcb->response_handle) >> 2,
scsi_cmd->cmnd[0], pinstance->host->unique_id,
RES_IS_VSET(res->cfg_entry) ? PMCRAID_VSET_BUS_ID :
PMCRAID_PHYS_BUS_ID,
RES_IS_VSET(res->cfg_entry) ?
(fw_version <= PMCRAID_FW_VERSION_1 ?
res->cfg_entry.unique_flags1 :
le16_to_cpu(res->cfg_entry.array_id) & 0xFF) :
RES_TARGET(res->cfg_entry.resource_address),
RES_LUN(res->cfg_entry.resource_address));
if (likely(rc == 0)) {
_pmcraid_fire_command(cmd);
} else {
pmcraid_err("queuecommand could not build ioadl\n");
pmcraid_return_cmd(cmd);
rc = SCSI_MLQUEUE_HOST_BUSY;
}
return rc;
}
static DEF_SCSI_QCMD(pmcraid_queuecommand)
/**
* pmcraid_open -char node "open" entry, allowed only users with admin access
*/
static int pmcraid_chr_open(struct inode *inode, struct file *filep)
{
struct pmcraid_instance *pinstance;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
/* Populate adapter instance * pointer for use by ioctl */
pinstance = container_of(inode->i_cdev, struct pmcraid_instance, cdev);
filep->private_data = pinstance;
return 0;
}
/**
* pmcraid_fasync - Async notifier registration from applications
*
* This function adds the calling process to a driver global queue. When an
* event occurs, SIGIO will be sent to all processes in this queue.
*/
static int pmcraid_chr_fasync(int fd, struct file *filep, int mode)
{
struct pmcraid_instance *pinstance;
int rc;
pinstance = filep->private_data;
mutex_lock(&pinstance->aen_queue_lock);
rc = fasync_helper(fd, filep, mode, &pinstance->aen_queue);
mutex_unlock(&pinstance->aen_queue_lock);
return rc;
}
/**
* pmcraid_build_passthrough_ioadls - builds SG elements for passthrough
* commands sent over IOCTL interface
*
* @cmd : pointer to struct pmcraid_cmd
* @buflen : length of the request buffer
* @direction : data transfer direction
*
* Return value
* 0 on success, non-zero error code on failure
*/
static int pmcraid_build_passthrough_ioadls(
struct pmcraid_cmd *cmd,
int buflen,
int direction
)
{
struct pmcraid_sglist *sglist = NULL;
struct scatterlist *sg = NULL;
struct pmcraid_ioarcb *ioarcb = &cmd->ioa_cb->ioarcb;
struct pmcraid_ioadl_desc *ioadl;
int i;
sglist = pmcraid_alloc_sglist(buflen);
if (!sglist) {
pmcraid_err("can't allocate memory for passthrough SGls\n");
return -ENOMEM;
}
sglist->num_dma_sg = dma_map_sg(&cmd->drv_inst->pdev->dev,
sglist->scatterlist,
sglist->num_sg, direction);
if (!sglist->num_dma_sg || sglist->num_dma_sg > PMCRAID_MAX_IOADLS) {
dev_err(&cmd->drv_inst->pdev->dev,
"Failed to map passthrough buffer!\n");
pmcraid_free_sglist(sglist);
return -EIO;
}
cmd->sglist = sglist;
ioarcb->request_flags0 |= NO_LINK_DESCS;
ioadl = pmcraid_init_ioadls(cmd, sglist->num_dma_sg);
/* Initialize IOADL descriptor addresses */
for_each_sg(sglist->scatterlist, sg, sglist->num_dma_sg, i) {
ioadl[i].data_len = cpu_to_le32(sg_dma_len(sg));
ioadl[i].address = cpu_to_le64(sg_dma_address(sg));
ioadl[i].flags = 0;
}
/* setup the last descriptor */
ioadl[i - 1].flags = IOADL_FLAGS_LAST_DESC;
return 0;
}
/**
* pmcraid_release_passthrough_ioadls - release passthrough ioadls
*
* @cmd: pointer to struct pmcraid_cmd for which ioadls were allocated
* @buflen: size of the request buffer
* @direction: data transfer direction
*
* Return value
* 0 on success, non-zero error code on failure
*/
static void pmcraid_release_passthrough_ioadls(
struct pmcraid_cmd *cmd,
int buflen,
int direction
)
{
struct pmcraid_sglist *sglist = cmd->sglist;
if (buflen > 0) {
dma_unmap_sg(&cmd->drv_inst->pdev->dev,
sglist->scatterlist,
sglist->num_sg,
direction);
pmcraid_free_sglist(sglist);
cmd->sglist = NULL;
}
}
/**
* pmcraid_ioctl_passthrough - handling passthrough IOCTL commands
*
* @pinstance: pointer to adapter instance structure
* @cmd: ioctl code
* @arg: pointer to pmcraid_passthrough_buffer user buffer
*
* Return value
* 0 on success, non-zero error code on failure
*/
static long pmcraid_ioctl_passthrough(
struct pmcraid_instance *pinstance,
unsigned int ioctl_cmd,
unsigned int buflen,
void __user *arg
)
{
struct pmcraid_passthrough_ioctl_buffer *buffer;
struct pmcraid_ioarcb *ioarcb;
struct pmcraid_cmd *cmd;
struct pmcraid_cmd *cancel_cmd;
void __user *request_buffer;
unsigned long request_offset;
unsigned long lock_flags;
void __user *ioasa;
u32 ioasc;
int request_size;
int buffer_size;
u8 direction;
int rc = 0;
/* If IOA reset is in progress, wait 10 secs for reset to complete */
if (pinstance->ioa_reset_in_progress) {
rc = wait_event_interruptible_timeout(
pinstance->reset_wait_q,
!pinstance->ioa_reset_in_progress,
msecs_to_jiffies(10000));
if (!rc)
return -ETIMEDOUT;
else if (rc < 0)
return -ERESTARTSYS;
}
/* If adapter is not in operational state, return error */
if (pinstance->ioa_state != IOA_STATE_OPERATIONAL) {
pmcraid_err("IOA is not operational\n");
return -ENOTTY;
}
buffer_size = sizeof(struct pmcraid_passthrough_ioctl_buffer);
buffer = kmalloc(buffer_size, GFP_KERNEL);
if (!buffer) {
pmcraid_err("no memory for passthrough buffer\n");
return -ENOMEM;
}
request_offset =
offsetof(struct pmcraid_passthrough_ioctl_buffer, request_buffer);
request_buffer = arg + request_offset;
rc = copy_from_user(buffer, arg,
sizeof(struct pmcraid_passthrough_ioctl_buffer));
ioasa = arg + offsetof(struct pmcraid_passthrough_ioctl_buffer, ioasa);
if (rc) {
pmcraid_err("ioctl: can't copy passthrough buffer\n");
rc = -EFAULT;
goto out_free_buffer;
}
request_size = le32_to_cpu(buffer->ioarcb.data_transfer_length);
if (buffer->ioarcb.request_flags0 & TRANSFER_DIR_WRITE) {
direction = DMA_TO_DEVICE;
} else {
direction = DMA_FROM_DEVICE;
}
if (request_size < 0) {
rc = -EINVAL;
goto out_free_buffer;
}
/* check if we have any additional command parameters */
if (le16_to_cpu(buffer->ioarcb.add_cmd_param_length)
> PMCRAID_ADD_CMD_PARAM_LEN) {
rc = -EINVAL;
goto out_free_buffer;
}
cmd = pmcraid_get_free_cmd(pinstance);
if (!cmd) {
pmcraid_err("free command block is not available\n");
rc = -ENOMEM;
goto out_free_buffer;
}
cmd->scsi_cmd = NULL;
ioarcb = &(cmd->ioa_cb->ioarcb);
/* Copy the user-provided IOARCB stuff field by field */
ioarcb->resource_handle = buffer->ioarcb.resource_handle;
ioarcb->data_transfer_length = buffer->ioarcb.data_transfer_length;
ioarcb->cmd_timeout = buffer->ioarcb.cmd_timeout;
ioarcb->request_type = buffer->ioarcb.request_type;
ioarcb->request_flags0 = buffer->ioarcb.request_flags0;
ioarcb->request_flags1 = buffer->ioarcb.request_flags1;
memcpy(ioarcb->cdb, buffer->ioarcb.cdb, PMCRAID_MAX_CDB_LEN);
if (buffer->ioarcb.add_cmd_param_length) {
ioarcb->add_cmd_param_length =
buffer->ioarcb.add_cmd_param_length;
ioarcb->add_cmd_param_offset =
buffer->ioarcb.add_cmd_param_offset;
memcpy(ioarcb->add_data.u.add_cmd_params,
buffer->ioarcb.add_data.u.add_cmd_params,
le16_to_cpu(buffer->ioarcb.add_cmd_param_length));
}
/* set hrrq number where the IOA should respond to. Note that all cmds
* generated internally uses hrrq_id 0, exception to this is the cmd
* block of scsi_cmd which is re-used (e.g. cancel/abort), which uses
* hrrq_id assigned here in queuecommand
*/
ioarcb->hrrq_id = atomic_add_return(1, &(pinstance->last_message_id)) %
pinstance->num_hrrq;
if (request_size) {
rc = pmcraid_build_passthrough_ioadls(cmd,
request_size,
direction);
if (rc) {
pmcraid_err("couldn't build passthrough ioadls\n");
goto out_free_cmd;
}
}
/* If data is being written into the device, copy the data from user
* buffers
*/
if (direction == DMA_TO_DEVICE && request_size > 0) {
rc = pmcraid_copy_sglist(cmd->sglist,
request_buffer,
request_size,
direction);
if (rc) {
pmcraid_err("failed to copy user buffer\n");
goto out_free_sglist;
}
}
/* passthrough ioctl is a blocking command so, put the user to sleep
* until timeout. Note that a timeout value of 0 means, do timeout.
*/
cmd->cmd_done = pmcraid_internal_done;
init_completion(&cmd->wait_for_completion);
cmd->completion_req = 1;
pmcraid_info("command(%d) (CDB[0] = %x) for %x\n",
le32_to_cpu(cmd->ioa_cb->ioarcb.response_handle) >> 2,
cmd->ioa_cb->ioarcb.cdb[0],
le32_to_cpu(cmd->ioa_cb->ioarcb.resource_handle));
spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
_pmcraid_fire_command(cmd);
spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
/* NOTE ! Remove the below line once abort_task is implemented
* in firmware. This line disables ioctl command timeout handling logic
* similar to IO command timeout handling, making ioctl commands to wait
* until the command completion regardless of timeout value specified in
* ioarcb
*/
buffer->ioarcb.cmd_timeout = 0;
/* If command timeout is specified put caller to wait till that time,
* otherwise it would be blocking wait. If command gets timed out, it
* will be aborted.
*/
if (buffer->ioarcb.cmd_timeout == 0) {
wait_for_completion(&cmd->wait_for_completion);
} else if (!wait_for_completion_timeout(
&cmd->wait_for_completion,
msecs_to_jiffies(le16_to_cpu(buffer->ioarcb.cmd_timeout) * 1000))) {
pmcraid_info("aborting cmd %d (CDB[0] = %x) due to timeout\n",
le32_to_cpu(cmd->ioa_cb->ioarcb.response_handle) >> 2,
cmd->ioa_cb->ioarcb.cdb[0]);
spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
cancel_cmd = pmcraid_abort_cmd(cmd);
spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
if (cancel_cmd) {
wait_for_completion(&cancel_cmd->wait_for_completion);
ioasc = le32_to_cpu(cancel_cmd->ioa_cb->ioasa.ioasc);
pmcraid_return_cmd(cancel_cmd);
/* if abort task couldn't find the command i.e it got
* completed prior to aborting, return good completion.
* if command got aborted successfully or there was IOA
* reset due to abort task itself getting timedout then
* return -ETIMEDOUT
*/
if (ioasc == PMCRAID_IOASC_IOA_WAS_RESET ||
PMCRAID_IOASC_SENSE_KEY(ioasc) == 0x00) {
if (ioasc != PMCRAID_IOASC_GC_IOARCB_NOTFOUND)
rc = -ETIMEDOUT;
goto out_handle_response;
}
}
/* no command block for abort task or abort task failed to abort
* the IOARCB, then wait for 150 more seconds and initiate reset
* sequence after timeout
*/
if (!wait_for_completion_timeout(
&cmd->wait_for_completion,
msecs_to_jiffies(150 * 1000))) {
pmcraid_reset_bringup(cmd->drv_inst);
rc = -ETIMEDOUT;
}
}
out_handle_response:
/* copy entire IOASA buffer and return IOCTL success.
* If copying IOASA to user-buffer fails, return
* EFAULT
*/
if (copy_to_user(ioasa, &cmd->ioa_cb->ioasa,
sizeof(struct pmcraid_ioasa))) {
pmcraid_err("failed to copy ioasa buffer to user\n");
rc = -EFAULT;
}
/* If the data transfer was from device, copy the data onto user
* buffers
*/
else if (direction == DMA_FROM_DEVICE && request_size > 0) {
rc = pmcraid_copy_sglist(cmd->sglist,
request_buffer,
request_size,
direction);
if (rc) {
pmcraid_err("failed to copy user buffer\n");
rc = -EFAULT;
}
}
out_free_sglist:
pmcraid_release_passthrough_ioadls(cmd, request_size, direction);
out_free_cmd:
pmcraid_return_cmd(cmd);
out_free_buffer:
kfree(buffer);
return rc;
}
/**
* pmcraid_ioctl_driver - ioctl handler for commands handled by driver itself
*
* @pinstance: pointer to adapter instance structure
* @cmd: ioctl command passed in
* @buflen: length of user_buffer
* @user_buffer: user buffer pointer
*
* Return Value
* 0 in case of success, otherwise appropriate error code
*/
static long pmcraid_ioctl_driver(
struct pmcraid_instance *pinstance,
unsigned int cmd,
unsigned int buflen,
void __user *user_buffer
)
{
int rc = -ENOSYS;
switch (cmd) {
case PMCRAID_IOCTL_RESET_ADAPTER:
pmcraid_reset_bringup(pinstance);
rc = 0;
break;
default:
break;
}
return rc;
}
/**
* pmcraid_check_ioctl_buffer - check for proper access to user buffer
*
* @cmd: ioctl command
* @arg: user buffer
* @hdr: pointer to kernel memory for pmcraid_ioctl_header
*
* Return Value
* negetive error code if there are access issues, otherwise zero.
* Upon success, returns ioctl header copied out of user buffer.
*/
static int pmcraid_check_ioctl_buffer(
int cmd,
void __user *arg,
struct pmcraid_ioctl_header *hdr
)
{
int rc;
if (copy_from_user(hdr, arg, sizeof(struct pmcraid_ioctl_header))) {
pmcraid_err("couldn't copy ioctl header from user buffer\n");
return -EFAULT;
}
/* check for valid driver signature */
rc = memcmp(hdr->signature,
PMCRAID_IOCTL_SIGNATURE,
sizeof(hdr->signature));
if (rc) {
pmcraid_err("signature verification failed\n");
return -EINVAL;
}
return 0;
}
/**
* pmcraid_ioctl - char node ioctl entry point
*/
static long pmcraid_chr_ioctl(
struct file *filep,
unsigned int cmd,
unsigned long arg
)
{
struct pmcraid_instance *pinstance = NULL;
struct pmcraid_ioctl_header *hdr = NULL;
void __user *argp = (void __user *)arg;
int retval = -ENOTTY;
hdr = kmalloc(sizeof(struct pmcraid_ioctl_header), GFP_KERNEL);
if (!hdr) {
pmcraid_err("failed to allocate memory for ioctl header\n");
return -ENOMEM;
}
retval = pmcraid_check_ioctl_buffer(cmd, argp, hdr);
if (retval) {
pmcraid_info("chr_ioctl: header check failed\n");
kfree(hdr);
return retval;
}
pinstance = filep->private_data;
if (!pinstance) {
pmcraid_info("adapter instance is not found\n");
kfree(hdr);
return -ENOTTY;
}
switch (_IOC_TYPE(cmd)) {
case PMCRAID_PASSTHROUGH_IOCTL:
/* If ioctl code is to download microcode, we need to block
* mid-layer requests.
*/
if (cmd == PMCRAID_IOCTL_DOWNLOAD_MICROCODE)
scsi_block_requests(pinstance->host);
retval = pmcraid_ioctl_passthrough(pinstance, cmd,
hdr->buffer_length, argp);
if (cmd == PMCRAID_IOCTL_DOWNLOAD_MICROCODE)
scsi_unblock_requests(pinstance->host);
break;
case PMCRAID_DRIVER_IOCTL:
arg += sizeof(struct pmcraid_ioctl_header);
retval = pmcraid_ioctl_driver(pinstance, cmd,
hdr->buffer_length, argp);
break;
default:
retval = -ENOTTY;
break;
}
kfree(hdr);
return retval;
}
/**
* File operations structure for management interface
*/
static const struct file_operations pmcraid_fops = {
.owner = THIS_MODULE,
.open = pmcraid_chr_open,
.fasync = pmcraid_chr_fasync,
.unlocked_ioctl = pmcraid_chr_ioctl,
.compat_ioctl = compat_ptr_ioctl,
.llseek = noop_llseek,
};
/**
* pmcraid_show_log_level - Display adapter's error logging level
* @dev: class device struct
* @buf: buffer
*
* Return value:
* number of bytes printed to buffer
*/
static ssize_t pmcraid_show_log_level(
struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct pmcraid_instance *pinstance =
(struct pmcraid_instance *)shost->hostdata;
return snprintf(buf, PAGE_SIZE, "%d\n", pinstance->current_log_level);
}
/**
* pmcraid_store_log_level - Change the adapter's error logging level
* @dev: class device struct
* @buf: buffer
* @count: not used
*
* Return value:
* number of bytes printed to buffer
*/
static ssize_t pmcraid_store_log_level(
struct device *dev,
struct device_attribute *attr,
const char *buf,
size_t count
)
{
struct Scsi_Host *shost;
struct pmcraid_instance *pinstance;
u8 val;
if (kstrtou8(buf, 10, &val))
return -EINVAL;
/* log-level should be from 0 to 2 */
if (val > 2)
return -EINVAL;
shost = class_to_shost(dev);
pinstance = (struct pmcraid_instance *)shost->hostdata;
pinstance->current_log_level = val;
return strlen(buf);
}
static struct device_attribute pmcraid_log_level_attr = {
.attr = {
.name = "log_level",
.mode = S_IRUGO | S_IWUSR,
},
.show = pmcraid_show_log_level,
.store = pmcraid_store_log_level,
};
/**
* pmcraid_show_drv_version - Display driver version
* @dev: class device struct
* @buf: buffer
*
* Return value:
* number of bytes printed to buffer
*/
static ssize_t pmcraid_show_drv_version(
struct device *dev,
struct device_attribute *attr,
char *buf
)
{
return snprintf(buf, PAGE_SIZE, "version: %s\n",
PMCRAID_DRIVER_VERSION);
}
static struct device_attribute pmcraid_driver_version_attr = {
.attr = {
.name = "drv_version",
.mode = S_IRUGO,
},
.show = pmcraid_show_drv_version,
};
/**
* pmcraid_show_io_adapter_id - Display driver assigned adapter id
* @dev: class device struct
* @buf: buffer
*
* Return value:
* number of bytes printed to buffer
*/
static ssize_t pmcraid_show_adapter_id(
struct device *dev,
struct device_attribute *attr,
char *buf
)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct pmcraid_instance *pinstance =
(struct pmcraid_instance *)shost->hostdata;
u32 adapter_id = (pinstance->pdev->bus->number << 8) |
pinstance->pdev->devfn;
u32 aen_group = pmcraid_event_family.id;
return snprintf(buf, PAGE_SIZE,
"adapter id: %d\nminor: %d\naen group: %d\n",
adapter_id, MINOR(pinstance->cdev.dev), aen_group);
}
static struct device_attribute pmcraid_adapter_id_attr = {
.attr = {
.name = "adapter_id",
.mode = S_IRUGO,
},
.show = pmcraid_show_adapter_id,
};
static struct device_attribute *pmcraid_host_attrs[] = {
&pmcraid_log_level_attr,
&pmcraid_driver_version_attr,
&pmcraid_adapter_id_attr,
NULL,
};
/* host template structure for pmcraid driver */
static struct scsi_host_template pmcraid_host_template = {
.module = THIS_MODULE,
.name = PMCRAID_DRIVER_NAME,
.queuecommand = pmcraid_queuecommand,
.eh_abort_handler = pmcraid_eh_abort_handler,
.eh_bus_reset_handler = pmcraid_eh_bus_reset_handler,
.eh_target_reset_handler = pmcraid_eh_target_reset_handler,
.eh_device_reset_handler = pmcraid_eh_device_reset_handler,
.eh_host_reset_handler = pmcraid_eh_host_reset_handler,
.slave_alloc = pmcraid_slave_alloc,
.slave_configure = pmcraid_slave_configure,
.slave_destroy = pmcraid_slave_destroy,
.change_queue_depth = pmcraid_change_queue_depth,
.can_queue = PMCRAID_MAX_IO_CMD,
.this_id = -1,
.sg_tablesize = PMCRAID_MAX_IOADLS,
.max_sectors = PMCRAID_IOA_MAX_SECTORS,
.no_write_same = 1,
.cmd_per_lun = PMCRAID_MAX_CMD_PER_LUN,
.shost_attrs = pmcraid_host_attrs,
.proc_name = PMCRAID_DRIVER_NAME,
};
/*
* pmcraid_isr_msix - implements MSI-X interrupt handling routine
* @irq: interrupt vector number
* @dev_id: pointer hrrq_vector
*
* Return Value
* IRQ_HANDLED if interrupt is handled or IRQ_NONE if ignored
*/
static irqreturn_t pmcraid_isr_msix(int irq, void *dev_id)
{
struct pmcraid_isr_param *hrrq_vector;
struct pmcraid_instance *pinstance;
unsigned long lock_flags;
u32 intrs_val;
int hrrq_id;
hrrq_vector = (struct pmcraid_isr_param *)dev_id;
hrrq_id = hrrq_vector->hrrq_id;
pinstance = hrrq_vector->drv_inst;
if (!hrrq_id) {
/* Read the interrupt */
intrs_val = pmcraid_read_interrupts(pinstance);
if (intrs_val &&
((ioread32(pinstance->int_regs.host_ioa_interrupt_reg)
& DOORBELL_INTR_MSIX_CLR) == 0)) {
/* Any error interrupts including unit_check,
* initiate IOA reset.In case of unit check indicate
* to reset_sequence that IOA unit checked and prepare
* for a dump during reset sequence
*/
if (intrs_val & PMCRAID_ERROR_INTERRUPTS) {
if (intrs_val & INTRS_IOA_UNIT_CHECK)
pinstance->ioa_unit_check = 1;
pmcraid_err("ISR: error interrupts: %x \
initiating reset\n", intrs_val);
spin_lock_irqsave(pinstance->host->host_lock,
lock_flags);
pmcraid_initiate_reset(pinstance);
spin_unlock_irqrestore(
pinstance->host->host_lock,
lock_flags);
}
/* If interrupt was as part of the ioa initialization,
* clear it. Delete the timer and wakeup the
* reset engine to proceed with reset sequence
*/
if (intrs_val & INTRS_TRANSITION_TO_OPERATIONAL)
pmcraid_clr_trans_op(pinstance);
/* Clear the interrupt register by writing
* to host to ioa doorbell. Once done
* FW will clear the interrupt.
*/
iowrite32(DOORBELL_INTR_MSIX_CLR,
pinstance->int_regs.host_ioa_interrupt_reg);
ioread32(pinstance->int_regs.host_ioa_interrupt_reg);
}
}
tasklet_schedule(&(pinstance->isr_tasklet[hrrq_id]));
return IRQ_HANDLED;
}
/**
* pmcraid_isr - implements legacy interrupt handling routine
*
* @irq: interrupt vector number
* @dev_id: pointer hrrq_vector
*
* Return Value
* IRQ_HANDLED if interrupt is handled or IRQ_NONE if ignored
*/
static irqreturn_t pmcraid_isr(int irq, void *dev_id)
{
struct pmcraid_isr_param *hrrq_vector;
struct pmcraid_instance *pinstance;
u32 intrs;
unsigned long lock_flags;
int hrrq_id = 0;
/* In case of legacy interrupt mode where interrupts are shared across
* isrs, it may be possible that the current interrupt is not from IOA
*/
if (!dev_id) {
printk(KERN_INFO "%s(): NULL host pointer\n", __func__);
return IRQ_NONE;
}
hrrq_vector = (struct pmcraid_isr_param *)dev_id;
pinstance = hrrq_vector->drv_inst;
intrs = pmcraid_read_interrupts(pinstance);
if (unlikely((intrs & PMCRAID_PCI_INTERRUPTS) == 0))
return IRQ_NONE;
/* Any error interrupts including unit_check, initiate IOA reset.
* In case of unit check indicate to reset_sequence that IOA unit
* checked and prepare for a dump during reset sequence
*/
if (intrs & PMCRAID_ERROR_INTERRUPTS) {
if (intrs & INTRS_IOA_UNIT_CHECK)
pinstance->ioa_unit_check = 1;
iowrite32(intrs,
pinstance->int_regs.ioa_host_interrupt_clr_reg);
pmcraid_err("ISR: error interrupts: %x initiating reset\n",
intrs);
intrs = ioread32(
pinstance->int_regs.ioa_host_interrupt_clr_reg);
spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
pmcraid_initiate_reset(pinstance);
spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
} else {
/* If interrupt was as part of the ioa initialization,
* clear. Delete the timer and wakeup the
* reset engine to proceed with reset sequence
*/
if (intrs & INTRS_TRANSITION_TO_OPERATIONAL) {
pmcraid_clr_trans_op(pinstance);
} else {
iowrite32(intrs,
pinstance->int_regs.ioa_host_interrupt_clr_reg);
ioread32(
pinstance->int_regs.ioa_host_interrupt_clr_reg);
tasklet_schedule(
&(pinstance->isr_tasklet[hrrq_id]));
}
}
return IRQ_HANDLED;
}
/**
* pmcraid_worker_function - worker thread function
*
* @workp: pointer to struct work queue
*
* Return Value
* None
*/
static void pmcraid_worker_function(struct work_struct *workp)
{
struct pmcraid_instance *pinstance;
struct pmcraid_resource_entry *res;
struct pmcraid_resource_entry *temp;
struct scsi_device *sdev;
unsigned long lock_flags;
unsigned long host_lock_flags;
u16 fw_version;
u8 bus, target, lun;
pinstance = container_of(workp, struct pmcraid_instance, worker_q);
/* add resources only after host is added into system */
if (!atomic_read(&pinstance->expose_resources))
return;
fw_version = be16_to_cpu(pinstance->inq_data->fw_version);
spin_lock_irqsave(&pinstance->resource_lock, lock_flags);
list_for_each_entry_safe(res, temp, &pinstance->used_res_q, queue) {
if (res->change_detected == RES_CHANGE_DEL && res->scsi_dev) {
sdev = res->scsi_dev;
/* host_lock must be held before calling
* scsi_device_get
*/
spin_lock_irqsave(pinstance->host->host_lock,
host_lock_flags);
if (!scsi_device_get(sdev)) {
spin_unlock_irqrestore(
pinstance->host->host_lock,
host_lock_flags);
pmcraid_info("deleting %x from midlayer\n",
res->cfg_entry.resource_address);
list_move_tail(&res->queue,
&pinstance->free_res_q);
spin_unlock_irqrestore(
&pinstance->resource_lock,
lock_flags);
scsi_remove_device(sdev);
scsi_device_put(sdev);
spin_lock_irqsave(&pinstance->resource_lock,
lock_flags);
res->change_detected = 0;
} else {
spin_unlock_irqrestore(
pinstance->host->host_lock,
host_lock_flags);
}
}
}
list_for_each_entry(res, &pinstance->used_res_q, queue) {
if (res->change_detected == RES_CHANGE_ADD) {
if (!pmcraid_expose_resource(fw_version,
&res->cfg_entry))
continue;
if (RES_IS_VSET(res->cfg_entry)) {
bus = PMCRAID_VSET_BUS_ID;
if (fw_version <= PMCRAID_FW_VERSION_1)
target = res->cfg_entry.unique_flags1;
else
target = le16_to_cpu(res->cfg_entry.array_id) & 0xFF;
lun = PMCRAID_VSET_LUN_ID;
} else {
bus = PMCRAID_PHYS_BUS_ID;
target =
RES_TARGET(
res->cfg_entry.resource_address);
lun = RES_LUN(res->cfg_entry.resource_address);
}
res->change_detected = 0;
spin_unlock_irqrestore(&pinstance->resource_lock,
lock_flags);
scsi_add_device(pinstance->host, bus, target, lun);
spin_lock_irqsave(&pinstance->resource_lock,
lock_flags);
}
}
spin_unlock_irqrestore(&pinstance->resource_lock, lock_flags);
}
/**
* pmcraid_tasklet_function - Tasklet function
*
* @instance: pointer to msix param structure
*
* Return Value
* None
*/
static void pmcraid_tasklet_function(unsigned long instance)
{
struct pmcraid_isr_param *hrrq_vector;
struct pmcraid_instance *pinstance;
unsigned long hrrq_lock_flags;
unsigned long pending_lock_flags;
unsigned long host_lock_flags;
spinlock_t *lockp; /* hrrq buffer lock */
int id;
u32 resp;
hrrq_vector = (struct pmcraid_isr_param *)instance;
pinstance = hrrq_vector->drv_inst;
id = hrrq_vector->hrrq_id;
lockp = &(pinstance->hrrq_lock[id]);
/* loop through each of the commands responded by IOA. Each HRRQ buf is
* protected by its own lock. Traversals must be done within this lock
* as there may be multiple tasklets running on multiple CPUs. Note
* that the lock is held just for picking up the response handle and
* manipulating hrrq_curr/toggle_bit values.
*/
spin_lock_irqsave(lockp, hrrq_lock_flags);
resp = le32_to_cpu(*(pinstance->hrrq_curr[id]));
while ((resp & HRRQ_TOGGLE_BIT) ==
pinstance->host_toggle_bit[id]) {
int cmd_index = resp >> 2;
struct pmcraid_cmd *cmd = NULL;
if (pinstance->hrrq_curr[id] < pinstance->hrrq_end[id]) {
pinstance->hrrq_curr[id]++;
} else {
pinstance->hrrq_curr[id] = pinstance->hrrq_start[id];
pinstance->host_toggle_bit[id] ^= 1u;
}
if (cmd_index >= PMCRAID_MAX_CMD) {
/* In case of invalid response handle, log message */
pmcraid_err("Invalid response handle %d\n", cmd_index);
resp = le32_to_cpu(*(pinstance->hrrq_curr[id]));
continue;
}
cmd = pinstance->cmd_list[cmd_index];
spin_unlock_irqrestore(lockp, hrrq_lock_flags);
spin_lock_irqsave(&pinstance->pending_pool_lock,
pending_lock_flags);
list_del(&cmd->free_list);
spin_unlock_irqrestore(&pinstance->pending_pool_lock,
pending_lock_flags);
del_timer(&cmd->timer);
atomic_dec(&pinstance->outstanding_cmds);
if (cmd->cmd_done == pmcraid_ioa_reset) {
spin_lock_irqsave(pinstance->host->host_lock,
host_lock_flags);
cmd->cmd_done(cmd);
spin_unlock_irqrestore(pinstance->host->host_lock,
host_lock_flags);
} else if (cmd->cmd_done != NULL) {
cmd->cmd_done(cmd);
}
/* loop over until we are done with all responses */
spin_lock_irqsave(lockp, hrrq_lock_flags);
resp = le32_to_cpu(*(pinstance->hrrq_curr[id]));
}
spin_unlock_irqrestore(lockp, hrrq_lock_flags);
}
/**
* pmcraid_unregister_interrupt_handler - de-register interrupts handlers
* @pinstance: pointer to adapter instance structure
*
* This routine un-registers registered interrupt handler and
* also frees irqs/vectors.
*
* Retun Value
* None
*/
static
void pmcraid_unregister_interrupt_handler(struct pmcraid_instance *pinstance)
{
struct pci_dev *pdev = pinstance->pdev;
int i;
for (i = 0; i < pinstance->num_hrrq; i++)
free_irq(pci_irq_vector(pdev, i), &pinstance->hrrq_vector[i]);
pinstance->interrupt_mode = 0;
pci_free_irq_vectors(pdev);
}
/**
* pmcraid_register_interrupt_handler - registers interrupt handler
* @pinstance: pointer to per-adapter instance structure
*
* Return Value
* 0 on success, non-zero error code otherwise.
*/
static int
pmcraid_register_interrupt_handler(struct pmcraid_instance *pinstance)
{
struct pci_dev *pdev = pinstance->pdev;
unsigned int irq_flag = PCI_IRQ_LEGACY, flag;
int num_hrrq, rc, i;
irq_handler_t isr;
if (pmcraid_enable_msix)
irq_flag |= PCI_IRQ_MSIX;
num_hrrq = pci_alloc_irq_vectors(pdev, 1, PMCRAID_NUM_MSIX_VECTORS,
irq_flag);
if (num_hrrq < 0)
return num_hrrq;
if (pdev->msix_enabled) {
flag = 0;
isr = pmcraid_isr_msix;
} else {
flag = IRQF_SHARED;
isr = pmcraid_isr;
}
for (i = 0; i < num_hrrq; i++) {
struct pmcraid_isr_param *vec = &pinstance->hrrq_vector[i];
vec->hrrq_id = i;
vec->drv_inst = pinstance;
rc = request_irq(pci_irq_vector(pdev, i), isr, flag,
PMCRAID_DRIVER_NAME, vec);
if (rc)
goto out_unwind;
}
pinstance->num_hrrq = num_hrrq;
if (pdev->msix_enabled) {
pinstance->interrupt_mode = 1;
iowrite32(DOORBELL_INTR_MODE_MSIX,
pinstance->int_regs.host_ioa_interrupt_reg);
ioread32(pinstance->int_regs.host_ioa_interrupt_reg);
}
return 0;
out_unwind:
while (--i > 0)
free_irq(pci_irq_vector(pdev, i), &pinstance->hrrq_vector[i]);
pci_free_irq_vectors(pdev);
return rc;
}
/**
* pmcraid_release_cmd_blocks - release buufers allocated for command blocks
* @pinstance: per adapter instance structure pointer
* @max_index: number of buffer blocks to release
*
* Return Value
* None
*/
static void
pmcraid_release_cmd_blocks(struct pmcraid_instance *pinstance, int max_index)
{
int i;
for (i = 0; i < max_index; i++) {
kmem_cache_free(pinstance->cmd_cachep, pinstance->cmd_list[i]);
pinstance->cmd_list[i] = NULL;
}
kmem_cache_destroy(pinstance->cmd_cachep);
pinstance->cmd_cachep = NULL;
}
/**
* pmcraid_release_control_blocks - releases buffers alloced for control blocks
* @pinstance: pointer to per adapter instance structure
* @max_index: number of buffers (from 0 onwards) to release
*
* This function assumes that the command blocks for which control blocks are
* linked are not released.
*
* Return Value
* None
*/
static void
pmcraid_release_control_blocks(
struct pmcraid_instance *pinstance,
int max_index
)
{
int i;
if (pinstance->control_pool == NULL)
return;
for (i = 0; i < max_index; i++) {
dma_pool_free(pinstance->control_pool,
pinstance->cmd_list[i]->ioa_cb,
pinstance->cmd_list[i]->ioa_cb_bus_addr);
pinstance->cmd_list[i]->ioa_cb = NULL;
pinstance->cmd_list[i]->ioa_cb_bus_addr = 0;
}
dma_pool_destroy(pinstance->control_pool);
pinstance->control_pool = NULL;
}
/**
* pmcraid_allocate_cmd_blocks - allocate memory for cmd block structures
* @pinstance - pointer to per adapter instance structure
*
* Allocates memory for command blocks using kernel slab allocator.
*
* Return Value
* 0 in case of success; -ENOMEM in case of failure
*/
static int pmcraid_allocate_cmd_blocks(struct pmcraid_instance *pinstance)
{
int i;
sprintf(pinstance->cmd_pool_name, "pmcraid_cmd_pool_%d",
pinstance->host->unique_id);
pinstance->cmd_cachep = kmem_cache_create(
pinstance->cmd_pool_name,
sizeof(struct pmcraid_cmd), 0,
SLAB_HWCACHE_ALIGN, NULL);
if (!pinstance->cmd_cachep)
return -ENOMEM;
for (i = 0; i < PMCRAID_MAX_CMD; i++) {
pinstance->cmd_list[i] =
kmem_cache_alloc(pinstance->cmd_cachep, GFP_KERNEL);
if (!pinstance->cmd_list[i]) {
pmcraid_release_cmd_blocks(pinstance, i);
return -ENOMEM;
}
}
return 0;
}
/**
* pmcraid_allocate_control_blocks - allocates memory control blocks
* @pinstance : pointer to per adapter instance structure
*
* This function allocates PCI memory for DMAable buffers like IOARCB, IOADLs
* and IOASAs. This is called after command blocks are already allocated.
*
* Return Value
* 0 in case it can allocate all control blocks, otherwise -ENOMEM
*/
static int pmcraid_allocate_control_blocks(struct pmcraid_instance *pinstance)
{
int i;
sprintf(pinstance->ctl_pool_name, "pmcraid_control_pool_%d",
pinstance->host->unique_id);
pinstance->control_pool =
dma_pool_create(pinstance->ctl_pool_name,
&pinstance->pdev->dev,
sizeof(struct pmcraid_control_block),
PMCRAID_IOARCB_ALIGNMENT, 0);
if (!pinstance->control_pool)
return -ENOMEM;
for (i = 0; i < PMCRAID_MAX_CMD; i++) {
pinstance->cmd_list[i]->ioa_cb =
dma_pool_alloc(
pinstance->control_pool,
GFP_KERNEL,
&(pinstance->cmd_list[i]->ioa_cb_bus_addr));
if (!pinstance->cmd_list[i]->ioa_cb) {
pmcraid_release_control_blocks(pinstance, i);
return -ENOMEM;
}
memset(pinstance->cmd_list[i]->ioa_cb, 0,
sizeof(struct pmcraid_control_block));
}
return 0;
}
/**
* pmcraid_release_host_rrqs - release memory allocated for hrrq buffer(s)
* @pinstance: pointer to per adapter instance structure
* @maxindex: size of hrrq buffer pointer array
*
* Return Value
* None
*/
static void
pmcraid_release_host_rrqs(struct pmcraid_instance *pinstance, int maxindex)
{
int i;
for (i = 0; i < maxindex; i++) {
dma_free_coherent(&pinstance->pdev->dev,
HRRQ_ENTRY_SIZE * PMCRAID_MAX_CMD,
pinstance->hrrq_start[i],
pinstance->hrrq_start_bus_addr[i]);
/* reset pointers and toggle bit to zeros */
pinstance->hrrq_start[i] = NULL;
pinstance->hrrq_start_bus_addr[i] = 0;
pinstance->host_toggle_bit[i] = 0;
}
}
/**
* pmcraid_allocate_host_rrqs - Allocate and initialize host RRQ buffers
* @pinstance: pointer to per adapter instance structure
*
* Return value
* 0 hrrq buffers are allocated, -ENOMEM otherwise.
*/
static int pmcraid_allocate_host_rrqs(struct pmcraid_instance *pinstance)
{
int i, buffer_size;
buffer_size = HRRQ_ENTRY_SIZE * PMCRAID_MAX_CMD;
for (i = 0; i < pinstance->num_hrrq; i++) {
pinstance->hrrq_start[i] =
dma_alloc_coherent(&pinstance->pdev->dev, buffer_size,
&pinstance->hrrq_start_bus_addr[i],
GFP_KERNEL);
if (!pinstance->hrrq_start[i]) {
pmcraid_err("pci_alloc failed for hrrq vector : %d\n",
i);
pmcraid_release_host_rrqs(pinstance, i);
return -ENOMEM;
}
memset(pinstance->hrrq_start[i], 0, buffer_size);
pinstance->hrrq_curr[i] = pinstance->hrrq_start[i];
pinstance->hrrq_end[i] =
pinstance->hrrq_start[i] + PMCRAID_MAX_CMD - 1;
pinstance->host_toggle_bit[i] = 1;
spin_lock_init(&pinstance->hrrq_lock[i]);
}
return 0;
}
/**
* pmcraid_release_hcams - release HCAM buffers
*
* @pinstance: pointer to per adapter instance structure
*
* Return value
* none
*/
static void pmcraid_release_hcams(struct pmcraid_instance *pinstance)
{
if (pinstance->ccn.msg != NULL) {
dma_free_coherent(&pinstance->pdev->dev,
PMCRAID_AEN_HDR_SIZE +
sizeof(struct pmcraid_hcam_ccn_ext),
pinstance->ccn.msg,
pinstance->ccn.baddr);
pinstance->ccn.msg = NULL;
pinstance->ccn.hcam = NULL;
pinstance->ccn.baddr = 0;
}
if (pinstance->ldn.msg != NULL) {
dma_free_coherent(&pinstance->pdev->dev,
PMCRAID_AEN_HDR_SIZE +
sizeof(struct pmcraid_hcam_ldn),
pinstance->ldn.msg,
pinstance->ldn.baddr);
pinstance->ldn.msg = NULL;
pinstance->ldn.hcam = NULL;
pinstance->ldn.baddr = 0;
}
}
/**
* pmcraid_allocate_hcams - allocates HCAM buffers
* @pinstance : pointer to per adapter instance structure
*
* Return Value:
* 0 in case of successful allocation, non-zero otherwise
*/
static int pmcraid_allocate_hcams(struct pmcraid_instance *pinstance)
{
pinstance->ccn.msg = dma_alloc_coherent(&pinstance->pdev->dev,
PMCRAID_AEN_HDR_SIZE +
sizeof(struct pmcraid_hcam_ccn_ext),
&pinstance->ccn.baddr, GFP_KERNEL);
pinstance->ldn.msg = dma_alloc_coherent(&pinstance->pdev->dev,
PMCRAID_AEN_HDR_SIZE +
sizeof(struct pmcraid_hcam_ldn),
&pinstance->ldn.baddr, GFP_KERNEL);
if (pinstance->ldn.msg == NULL || pinstance->ccn.msg == NULL) {
pmcraid_release_hcams(pinstance);
} else {
pinstance->ccn.hcam =
(void *)pinstance->ccn.msg + PMCRAID_AEN_HDR_SIZE;
pinstance->ldn.hcam =
(void *)pinstance->ldn.msg + PMCRAID_AEN_HDR_SIZE;
atomic_set(&pinstance->ccn.ignore, 0);
atomic_set(&pinstance->ldn.ignore, 0);
}
return (pinstance->ldn.msg == NULL) ? -ENOMEM : 0;
}
/**
* pmcraid_release_config_buffers - release config.table buffers
* @pinstance: pointer to per adapter instance structure
*
* Return Value
* none
*/
static void pmcraid_release_config_buffers(struct pmcraid_instance *pinstance)
{
if (pinstance->cfg_table != NULL &&
pinstance->cfg_table_bus_addr != 0) {
dma_free_coherent(&pinstance->pdev->dev,
sizeof(struct pmcraid_config_table),
pinstance->cfg_table,
pinstance->cfg_table_bus_addr);
pinstance->cfg_table = NULL;
pinstance->cfg_table_bus_addr = 0;
}
if (pinstance->res_entries != NULL) {
int i;
for (i = 0; i < PMCRAID_MAX_RESOURCES; i++)
list_del(&pinstance->res_entries[i].queue);
kfree(pinstance->res_entries);
pinstance->res_entries = NULL;
}
pmcraid_release_hcams(pinstance);
}
/**
* pmcraid_allocate_config_buffers - allocates DMAable memory for config table
* @pinstance : pointer to per adapter instance structure
*
* Return Value
* 0 for successful allocation, -ENOMEM for any failure
*/
static int pmcraid_allocate_config_buffers(struct pmcraid_instance *pinstance)
{
int i;
pinstance->res_entries =
kcalloc(PMCRAID_MAX_RESOURCES,
sizeof(struct pmcraid_resource_entry),
GFP_KERNEL);
if (NULL == pinstance->res_entries) {
pmcraid_err("failed to allocate memory for resource table\n");
return -ENOMEM;
}
for (i = 0; i < PMCRAID_MAX_RESOURCES; i++)
list_add_tail(&pinstance->res_entries[i].queue,
&pinstance->free_res_q);
pinstance->cfg_table = dma_alloc_coherent(&pinstance->pdev->dev,
sizeof(struct pmcraid_config_table),
&pinstance->cfg_table_bus_addr,
GFP_KERNEL);
if (NULL == pinstance->cfg_table) {
pmcraid_err("couldn't alloc DMA memory for config table\n");
pmcraid_release_config_buffers(pinstance);
return -ENOMEM;
}
if (pmcraid_allocate_hcams(pinstance)) {
pmcraid_err("could not alloc DMA memory for HCAMS\n");
pmcraid_release_config_buffers(pinstance);
return -ENOMEM;
}
return 0;
}
/**
* pmcraid_init_tasklets - registers tasklets for response handling
*
* @pinstance: pointer adapter instance structure
*
* Return value
* none
*/
static void pmcraid_init_tasklets(struct pmcraid_instance *pinstance)
{
int i;
for (i = 0; i < pinstance->num_hrrq; i++)
tasklet_init(&pinstance->isr_tasklet[i],
pmcraid_tasklet_function,
(unsigned long)&pinstance->hrrq_vector[i]);
}
/**
* pmcraid_kill_tasklets - destroys tasklets registered for response handling
*
* @pinstance: pointer to adapter instance structure
*
* Return value
* none
*/
static void pmcraid_kill_tasklets(struct pmcraid_instance *pinstance)
{
int i;
for (i = 0; i < pinstance->num_hrrq; i++)
tasklet_kill(&pinstance->isr_tasklet[i]);
}
/**
* pmcraid_release_buffers - release per-adapter buffers allocated
*
* @pinstance: pointer to adapter soft state
*
* Return Value
* none
*/
static void pmcraid_release_buffers(struct pmcraid_instance *pinstance)
{
pmcraid_release_config_buffers(pinstance);
pmcraid_release_control_blocks(pinstance, PMCRAID_MAX_CMD);
pmcraid_release_cmd_blocks(pinstance, PMCRAID_MAX_CMD);
pmcraid_release_host_rrqs(pinstance, pinstance->num_hrrq);
if (pinstance->inq_data != NULL) {
dma_free_coherent(&pinstance->pdev->dev,
sizeof(struct pmcraid_inquiry_data),
pinstance->inq_data,
pinstance->inq_data_baddr);
pinstance->inq_data = NULL;
pinstance->inq_data_baddr = 0;
}
if (pinstance->timestamp_data != NULL) {
dma_free_coherent(&pinstance->pdev->dev,
sizeof(struct pmcraid_timestamp_data),
pinstance->timestamp_data,
pinstance->timestamp_data_baddr);
pinstance->timestamp_data = NULL;
pinstance->timestamp_data_baddr = 0;
}
}
/**
* pmcraid_init_buffers - allocates memory and initializes various structures
* @pinstance: pointer to per adapter instance structure
*
* This routine pre-allocates memory based on the type of block as below:
* cmdblocks(PMCRAID_MAX_CMD): kernel memory using kernel's slab_allocator,
* IOARCBs(PMCRAID_MAX_CMD) : DMAable memory, using pci pool allocator
* config-table entries : DMAable memory using dma_alloc_coherent
* HostRRQs : DMAable memory, using dma_alloc_coherent
*
* Return Value
* 0 in case all of the blocks are allocated, -ENOMEM otherwise.
*/
static int pmcraid_init_buffers(struct pmcraid_instance *pinstance)
{
int i;
if (pmcraid_allocate_host_rrqs(pinstance)) {
pmcraid_err("couldn't allocate memory for %d host rrqs\n",
pinstance->num_hrrq);
return -ENOMEM;
}
if (pmcraid_allocate_config_buffers(pinstance)) {
pmcraid_err("couldn't allocate memory for config buffers\n");
pmcraid_release_host_rrqs(pinstance, pinstance->num_hrrq);
return -ENOMEM;
}
if (pmcraid_allocate_cmd_blocks(pinstance)) {
pmcraid_err("couldn't allocate memory for cmd blocks\n");
pmcraid_release_config_buffers(pinstance);
pmcraid_release_host_rrqs(pinstance, pinstance->num_hrrq);
return -ENOMEM;
}
if (pmcraid_allocate_control_blocks(pinstance)) {
pmcraid_err("couldn't allocate memory control blocks\n");
pmcraid_release_config_buffers(pinstance);
pmcraid_release_cmd_blocks(pinstance, PMCRAID_MAX_CMD);
pmcraid_release_host_rrqs(pinstance, pinstance->num_hrrq);
return -ENOMEM;
}
/* allocate DMAable memory for page D0 INQUIRY buffer */
pinstance->inq_data = dma_alloc_coherent(&pinstance->pdev->dev,
sizeof(struct pmcraid_inquiry_data),
&pinstance->inq_data_baddr, GFP_KERNEL);
if (pinstance->inq_data == NULL) {
pmcraid_err("couldn't allocate DMA memory for INQUIRY\n");
pmcraid_release_buffers(pinstance);
return -ENOMEM;
}
/* allocate DMAable memory for set timestamp data buffer */
pinstance->timestamp_data = dma_alloc_coherent(&pinstance->pdev->dev,
sizeof(struct pmcraid_timestamp_data),
&pinstance->timestamp_data_baddr,
GFP_KERNEL);
if (pinstance->timestamp_data == NULL) {
pmcraid_err("couldn't allocate DMA memory for \
set time_stamp \n");
pmcraid_release_buffers(pinstance);
return -ENOMEM;
}
/* Initialize all the command blocks and add them to free pool. No
* need to lock (free_pool_lock) as this is done in initialization
* itself
*/
for (i = 0; i < PMCRAID_MAX_CMD; i++) {
struct pmcraid_cmd *cmdp = pinstance->cmd_list[i];
pmcraid_init_cmdblk(cmdp, i);
cmdp->drv_inst = pinstance;
list_add_tail(&cmdp->free_list, &pinstance->free_cmd_pool);
}
return 0;
}
/**
* pmcraid_reinit_buffers - resets various buffer pointers
* @pinstance: pointer to adapter instance
* Return value
* none
*/
static void pmcraid_reinit_buffers(struct pmcraid_instance *pinstance)
{
int i;
int buffer_size = HRRQ_ENTRY_SIZE * PMCRAID_MAX_CMD;
for (i = 0; i < pinstance->num_hrrq; i++) {
memset(pinstance->hrrq_start[i], 0, buffer_size);
pinstance->hrrq_curr[i] = pinstance->hrrq_start[i];
pinstance->hrrq_end[i] =
pinstance->hrrq_start[i] + PMCRAID_MAX_CMD - 1;
pinstance->host_toggle_bit[i] = 1;
}
}
/**
* pmcraid_init_instance - initialize per instance data structure
* @pdev: pointer to pci device structure
* @host: pointer to Scsi_Host structure
* @mapped_pci_addr: memory mapped IOA configuration registers
*
* Return Value
* 0 on success, non-zero in case of any failure
*/
static int pmcraid_init_instance(struct pci_dev *pdev, struct Scsi_Host *host,
void __iomem *mapped_pci_addr)
{
struct pmcraid_instance *pinstance =
(struct pmcraid_instance *)host->hostdata;
pinstance->host = host;
pinstance->pdev = pdev;
/* Initialize register addresses */
pinstance->mapped_dma_addr = mapped_pci_addr;
/* Initialize chip-specific details */
{
struct pmcraid_chip_details *chip_cfg = pinstance->chip_cfg;
struct pmcraid_interrupts *pint_regs = &pinstance->int_regs;
pinstance->ioarrin = mapped_pci_addr + chip_cfg->ioarrin;
pint_regs->ioa_host_interrupt_reg =
mapped_pci_addr + chip_cfg->ioa_host_intr;
pint_regs->ioa_host_interrupt_clr_reg =
mapped_pci_addr + chip_cfg->ioa_host_intr_clr;
pint_regs->ioa_host_msix_interrupt_reg =
mapped_pci_addr + chip_cfg->ioa_host_msix_intr;
pint_regs->host_ioa_interrupt_reg =
mapped_pci_addr + chip_cfg->host_ioa_intr;
pint_regs->host_ioa_interrupt_clr_reg =
mapped_pci_addr + chip_cfg->host_ioa_intr_clr;
/* Current version of firmware exposes interrupt mask set
* and mask clr registers through memory mapped bar0.
*/
pinstance->mailbox = mapped_pci_addr + chip_cfg->mailbox;
pinstance->ioa_status = mapped_pci_addr + chip_cfg->ioastatus;
pint_regs->ioa_host_interrupt_mask_reg =
mapped_pci_addr + chip_cfg->ioa_host_mask;
pint_regs->ioa_host_interrupt_mask_clr_reg =
mapped_pci_addr + chip_cfg->ioa_host_mask_clr;
pint_regs->global_interrupt_mask_reg =
mapped_pci_addr + chip_cfg->global_intr_mask;
};
pinstance->ioa_reset_attempts = 0;
init_waitqueue_head(&pinstance->reset_wait_q);
atomic_set(&pinstance->outstanding_cmds, 0);
atomic_set(&pinstance->last_message_id, 0);
atomic_set(&pinstance->expose_resources, 0);
INIT_LIST_HEAD(&pinstance->free_res_q);
INIT_LIST_HEAD(&pinstance->used_res_q);
INIT_LIST_HEAD(&pinstance->free_cmd_pool);
INIT_LIST_HEAD(&pinstance->pending_cmd_pool);
spin_lock_init(&pinstance->free_pool_lock);
spin_lock_init(&pinstance->pending_pool_lock);
spin_lock_init(&pinstance->resource_lock);
mutex_init(&pinstance->aen_queue_lock);
/* Work-queue (Shared) for deferred processing error handling */
INIT_WORK(&pinstance->worker_q, pmcraid_worker_function);
/* Initialize the default log_level */
pinstance->current_log_level = pmcraid_log_level;
/* Setup variables required for reset engine */
pinstance->ioa_state = IOA_STATE_UNKNOWN;
pinstance->reset_cmd = NULL;
return 0;
}
/**
* pmcraid_shutdown - shutdown adapter controller.
* @pdev: pci device struct
*
* Issues an adapter shutdown to the card waits for its completion
*
* Return value
* none
*/
static void pmcraid_shutdown(struct pci_dev *pdev)
{
struct pmcraid_instance *pinstance = pci_get_drvdata(pdev);
pmcraid_reset_bringdown(pinstance);
}
/**
* pmcraid_get_minor - returns unused minor number from minor number bitmap
*/
static unsigned short pmcraid_get_minor(void)
{
int minor;
minor = find_first_zero_bit(pmcraid_minor, PMCRAID_MAX_ADAPTERS);
__set_bit(minor, pmcraid_minor);
return minor;
}
/**
* pmcraid_release_minor - releases given minor back to minor number bitmap
*/
static void pmcraid_release_minor(unsigned short minor)
{
__clear_bit(minor, pmcraid_minor);
}
/**
* pmcraid_setup_chrdev - allocates a minor number and registers a char device
*
* @pinstance: pointer to adapter instance for which to register device
*
* Return value
* 0 in case of success, otherwise non-zero
*/
static int pmcraid_setup_chrdev(struct pmcraid_instance *pinstance)
{
int minor;
int error;
minor = pmcraid_get_minor();
cdev_init(&pinstance->cdev, &pmcraid_fops);
pinstance->cdev.owner = THIS_MODULE;
error = cdev_add(&pinstance->cdev, MKDEV(pmcraid_major, minor), 1);
if (error)
pmcraid_release_minor(minor);
else
device_create(pmcraid_class, NULL, MKDEV(pmcraid_major, minor),
NULL, "%s%u", PMCRAID_DEVFILE, minor);
return error;
}
/**
* pmcraid_release_chrdev - unregisters per-adapter management interface
*
* @pinstance: pointer to adapter instance structure
*
* Return value
* none
*/
static void pmcraid_release_chrdev(struct pmcraid_instance *pinstance)
{
pmcraid_release_minor(MINOR(pinstance->cdev.dev));
device_destroy(pmcraid_class,
MKDEV(pmcraid_major, MINOR(pinstance->cdev.dev)));
cdev_del(&pinstance->cdev);
}
/**
* pmcraid_remove - IOA hot plug remove entry point
* @pdev: pci device struct
*
* Return value
* none
*/
static void pmcraid_remove(struct pci_dev *pdev)
{
struct pmcraid_instance *pinstance = pci_get_drvdata(pdev);
/* remove the management interface (/dev file) for this device */
pmcraid_release_chrdev(pinstance);
/* remove host template from scsi midlayer */
scsi_remove_host(pinstance->host);
/* block requests from mid-layer */
scsi_block_requests(pinstance->host);
/* initiate shutdown adapter */
pmcraid_shutdown(pdev);
pmcraid_disable_interrupts(pinstance, ~0);
flush_work(&pinstance->worker_q);
pmcraid_kill_tasklets(pinstance);
pmcraid_unregister_interrupt_handler(pinstance);
pmcraid_release_buffers(pinstance);
iounmap(pinstance->mapped_dma_addr);
pci_release_regions(pdev);
scsi_host_put(pinstance->host);
pci_disable_device(pdev);
return;
}
#ifdef CONFIG_PM
/**
* pmcraid_suspend - driver suspend entry point for power management
* @pdev: PCI device structure
* @state: PCI power state to suspend routine
*
* Return Value - 0 always
*/
static int pmcraid_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct pmcraid_instance *pinstance = pci_get_drvdata(pdev);
pmcraid_shutdown(pdev);
pmcraid_disable_interrupts(pinstance, ~0);
pmcraid_kill_tasklets(pinstance);
pci_set_drvdata(pinstance->pdev, pinstance);
pmcraid_unregister_interrupt_handler(pinstance);
pci_save_state(pdev);
pci_disable_device(pdev);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
return 0;
}
/**
* pmcraid_resume - driver resume entry point PCI power management
* @pdev: PCI device structure
*
* Return Value - 0 in case of success. Error code in case of any failure
*/
static int pmcraid_resume(struct pci_dev *pdev)
{
struct pmcraid_instance *pinstance = pci_get_drvdata(pdev);
struct Scsi_Host *host = pinstance->host;
int rc;
pci_set_power_state(pdev, PCI_D0);
pci_enable_wake(pdev, PCI_D0, 0);
pci_restore_state(pdev);
rc = pci_enable_device(pdev);
if (rc) {
dev_err(&pdev->dev, "resume: Enable device failed\n");
return rc;
}
pci_set_master(pdev);
if (sizeof(dma_addr_t) == 4 ||
dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)))
rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc == 0)
rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc != 0) {
dev_err(&pdev->dev, "resume: Failed to set PCI DMA mask\n");
goto disable_device;
}
pmcraid_disable_interrupts(pinstance, ~0);
atomic_set(&pinstance->outstanding_cmds, 0);
rc = pmcraid_register_interrupt_handler(pinstance);
if (rc) {
dev_err(&pdev->dev,
"resume: couldn't register interrupt handlers\n");
rc = -ENODEV;
goto release_host;
}
pmcraid_init_tasklets(pinstance);
pmcraid_enable_interrupts(pinstance, PMCRAID_PCI_INTERRUPTS);
/* Start with hard reset sequence which brings up IOA to operational
* state as well as completes the reset sequence.
*/
pinstance->ioa_hard_reset = 1;
/* Start IOA firmware initialization and bring card to Operational
* state.
*/
if (pmcraid_reset_bringup(pinstance)) {
dev_err(&pdev->dev, "couldn't initialize IOA\n");
rc = -ENODEV;
goto release_tasklets;
}
return 0;
release_tasklets:
pmcraid_disable_interrupts(pinstance, ~0);
pmcraid_kill_tasklets(pinstance);
pmcraid_unregister_interrupt_handler(pinstance);
release_host:
scsi_host_put(host);
disable_device:
pci_disable_device(pdev);
return rc;
}
#else
#define pmcraid_suspend NULL
#define pmcraid_resume NULL
#endif /* CONFIG_PM */
/**
* pmcraid_complete_ioa_reset - Called by either timer or tasklet during
* completion of the ioa reset
* @cmd: pointer to reset command block
*/
static void pmcraid_complete_ioa_reset(struct pmcraid_cmd *cmd)
{
struct pmcraid_instance *pinstance = cmd->drv_inst;
unsigned long flags;
spin_lock_irqsave(pinstance->host->host_lock, flags);
pmcraid_ioa_reset(cmd);
spin_unlock_irqrestore(pinstance->host->host_lock, flags);
scsi_unblock_requests(pinstance->host);
schedule_work(&pinstance->worker_q);
}
/**
* pmcraid_set_supported_devs - sends SET SUPPORTED DEVICES to IOAFP
*
* @cmd: pointer to pmcraid_cmd structure
*
* Return Value
* 0 for success or non-zero for failure cases
*/
static void pmcraid_set_supported_devs(struct pmcraid_cmd *cmd)
{
struct pmcraid_ioarcb *ioarcb = &cmd->ioa_cb->ioarcb;
void (*cmd_done) (struct pmcraid_cmd *) = pmcraid_complete_ioa_reset;
pmcraid_reinit_cmdblk(cmd);
ioarcb->resource_handle = cpu_to_le32(PMCRAID_IOA_RES_HANDLE);
ioarcb->request_type = REQ_TYPE_IOACMD;
ioarcb->cdb[0] = PMCRAID_SET_SUPPORTED_DEVICES;
ioarcb->cdb[1] = ALL_DEVICES_SUPPORTED;
/* If this was called as part of resource table reinitialization due to
* lost CCN, it is enough to return the command block back to free pool
* as part of set_supported_devs completion function.
*/
if (cmd->drv_inst->reinit_cfg_table) {
cmd->drv_inst->reinit_cfg_table = 0;
cmd->release = 1;
cmd_done = pmcraid_reinit_cfgtable_done;
}
/* we will be done with the reset sequence after set supported devices,
* setup the done function to return the command block back to free
* pool
*/
pmcraid_send_cmd(cmd,
cmd_done,
PMCRAID_SET_SUP_DEV_TIMEOUT,
pmcraid_timeout_handler);
return;
}
/**
* pmcraid_set_timestamp - set the timestamp to IOAFP
*
* @cmd: pointer to pmcraid_cmd structure
*
* Return Value
* 0 for success or non-zero for failure cases
*/
static void pmcraid_set_timestamp(struct pmcraid_cmd *cmd)
{
struct pmcraid_instance *pinstance = cmd->drv_inst;
struct pmcraid_ioarcb *ioarcb = &cmd->ioa_cb->ioarcb;
__be32 time_stamp_len = cpu_to_be32(PMCRAID_TIMESTAMP_LEN);
struct pmcraid_ioadl_desc *ioadl;
u64 timestamp;
timestamp = ktime_get_real_seconds() * 1000;
pinstance->timestamp_data->timestamp[0] = (__u8)(timestamp);
pinstance->timestamp_data->timestamp[1] = (__u8)((timestamp) >> 8);
pinstance->timestamp_data->timestamp[2] = (__u8)((timestamp) >> 16);
pinstance->timestamp_data->timestamp[3] = (__u8)((timestamp) >> 24);
pinstance->timestamp_data->timestamp[4] = (__u8)((timestamp) >> 32);
pinstance->timestamp_data->timestamp[5] = (__u8)((timestamp) >> 40);
pmcraid_reinit_cmdblk(cmd);
ioarcb->request_type = REQ_TYPE_SCSI;
ioarcb->resource_handle = cpu_to_le32(PMCRAID_IOA_RES_HANDLE);
ioarcb->cdb[0] = PMCRAID_SCSI_SET_TIMESTAMP;
ioarcb->cdb[1] = PMCRAID_SCSI_SERVICE_ACTION;
memcpy(&(ioarcb->cdb[6]), &time_stamp_len, sizeof(time_stamp_len));
ioarcb->ioadl_bus_addr = cpu_to_le64((cmd->ioa_cb_bus_addr) +
offsetof(struct pmcraid_ioarcb,
add_data.u.ioadl[0]));
ioarcb->ioadl_length = cpu_to_le32(sizeof(struct pmcraid_ioadl_desc));
ioarcb->ioarcb_bus_addr &= cpu_to_le64(~(0x1FULL));
ioarcb->request_flags0 |= NO_LINK_DESCS;
ioarcb->request_flags0 |= TRANSFER_DIR_WRITE;
ioarcb->data_transfer_length =
cpu_to_le32(sizeof(struct pmcraid_timestamp_data));
ioadl = &(ioarcb->add_data.u.ioadl[0]);
ioadl->flags = IOADL_FLAGS_LAST_DESC;
ioadl->address = cpu_to_le64(pinstance->timestamp_data_baddr);
ioadl->data_len = cpu_to_le32(sizeof(struct pmcraid_timestamp_data));
if (!pinstance->timestamp_error) {
pinstance->timestamp_error = 0;
pmcraid_send_cmd(cmd, pmcraid_set_supported_devs,
PMCRAID_INTERNAL_TIMEOUT, pmcraid_timeout_handler);
} else {
pmcraid_send_cmd(cmd, pmcraid_return_cmd,
PMCRAID_INTERNAL_TIMEOUT, pmcraid_timeout_handler);
return;
}
}
/**
* pmcraid_init_res_table - Initialize the resource table
* @cmd: pointer to pmcraid command struct
*
* This function looks through the existing resource table, comparing
* it with the config table. This function will take care of old/new
* devices and schedule adding/removing them from the mid-layer
* as appropriate.
*
* Return value
* None
*/
static void pmcraid_init_res_table(struct pmcraid_cmd *cmd)
{
struct pmcraid_instance *pinstance = cmd->drv_inst;
struct pmcraid_resource_entry *res, *temp;
struct pmcraid_config_table_entry *cfgte;
unsigned long lock_flags;
int found, rc, i;
u16 fw_version;
LIST_HEAD(old_res);
if (pinstance->cfg_table->flags & MICROCODE_UPDATE_REQUIRED)
pmcraid_err("IOA requires microcode download\n");
fw_version = be16_to_cpu(pinstance->inq_data->fw_version);
/* resource list is protected by pinstance->resource_lock.
* init_res_table can be called from probe (user-thread) or runtime
* reset (timer/tasklet)
*/
spin_lock_irqsave(&pinstance->resource_lock, lock_flags);
list_for_each_entry_safe(res, temp, &pinstance->used_res_q, queue)
list_move_tail(&res->queue, &old_res);
for (i = 0; i < le16_to_cpu(pinstance->cfg_table->num_entries); i++) {
if (be16_to_cpu(pinstance->inq_data->fw_version) <=
PMCRAID_FW_VERSION_1)
cfgte = &pinstance->cfg_table->entries[i];
else
cfgte = (struct pmcraid_config_table_entry *)
&pinstance->cfg_table->entries_ext[i];
if (!pmcraid_expose_resource(fw_version, cfgte))
continue;
found = 0;
/* If this entry was already detected and initialized */
list_for_each_entry_safe(res, temp, &old_res, queue) {
rc = memcmp(&res->cfg_entry.resource_address,
&cfgte->resource_address,
sizeof(cfgte->resource_address));
if (!rc) {
list_move_tail(&res->queue,
&pinstance->used_res_q);
found = 1;
break;
}
}
/* If this is new entry, initialize it and add it the queue */
if (!found) {
if (list_empty(&pinstance->free_res_q)) {
pmcraid_err("Too many devices attached\n");
break;
}
found = 1;
res = list_entry(pinstance->free_res_q.next,
struct pmcraid_resource_entry, queue);
res->scsi_dev = NULL;
res->change_detected = RES_CHANGE_ADD;
res->reset_progress = 0;
list_move_tail(&res->queue, &pinstance->used_res_q);
}
/* copy new configuration table entry details into driver
* maintained resource entry
*/
if (found) {
memcpy(&res->cfg_entry, cfgte,
pinstance->config_table_entry_size);
pmcraid_info("New res type:%x, vset:%x, addr:%x:\n",
res->cfg_entry.resource_type,
(fw_version <= PMCRAID_FW_VERSION_1 ?
res->cfg_entry.unique_flags1 :
le16_to_cpu(res->cfg_entry.array_id) & 0xFF),
le32_to_cpu(res->cfg_entry.resource_address));
}
}
/* Detect any deleted entries, mark them for deletion from mid-layer */
list_for_each_entry_safe(res, temp, &old_res, queue) {
if (res->scsi_dev) {
res->change_detected = RES_CHANGE_DEL;
res->cfg_entry.resource_handle =
PMCRAID_INVALID_RES_HANDLE;
list_move_tail(&res->queue, &pinstance->used_res_q);
} else {
list_move_tail(&res->queue, &pinstance->free_res_q);
}
}
/* release the resource list lock */
spin_unlock_irqrestore(&pinstance->resource_lock, lock_flags);
pmcraid_set_timestamp(cmd);
}
/**
* pmcraid_querycfg - Send a Query IOA Config to the adapter.
* @cmd: pointer pmcraid_cmd struct
*
* This function sends a Query IOA Configuration command to the adapter to
* retrieve the IOA configuration table.
*
* Return value:
* none
*/
static void pmcraid_querycfg(struct pmcraid_cmd *cmd)
{
struct pmcraid_ioarcb *ioarcb = &cmd->ioa_cb->ioarcb;
struct pmcraid_ioadl_desc *ioadl;
struct pmcraid_instance *pinstance = cmd->drv_inst;
__be32 cfg_table_size = cpu_to_be32(sizeof(struct pmcraid_config_table));
if (be16_to_cpu(pinstance->inq_data->fw_version) <=
PMCRAID_FW_VERSION_1)
pinstance->config_table_entry_size =
sizeof(struct pmcraid_config_table_entry);
else
pinstance->config_table_entry_size =
sizeof(struct pmcraid_config_table_entry_ext);
ioarcb->request_type = REQ_TYPE_IOACMD;
ioarcb->resource_handle = cpu_to_le32(PMCRAID_IOA_RES_HANDLE);
ioarcb->cdb[0] = PMCRAID_QUERY_IOA_CONFIG;
/* firmware requires 4-byte length field, specified in B.E format */
memcpy(&(ioarcb->cdb[10]), &cfg_table_size, sizeof(cfg_table_size));
/* Since entire config table can be described by single IOADL, it can
* be part of IOARCB itself
*/
ioarcb->ioadl_bus_addr = cpu_to_le64((cmd->ioa_cb_bus_addr) +
offsetof(struct pmcraid_ioarcb,
add_data.u.ioadl[0]));
ioarcb->ioadl_length = cpu_to_le32(sizeof(struct pmcraid_ioadl_desc));
ioarcb->ioarcb_bus_addr &= cpu_to_le64(~0x1FULL);
ioarcb->request_flags0 |= NO_LINK_DESCS;
ioarcb->data_transfer_length =
cpu_to_le32(sizeof(struct pmcraid_config_table));
ioadl = &(ioarcb->add_data.u.ioadl[0]);
ioadl->flags = IOADL_FLAGS_LAST_DESC;
ioadl->address = cpu_to_le64(pinstance->cfg_table_bus_addr);
ioadl->data_len = cpu_to_le32(sizeof(struct pmcraid_config_table));
pmcraid_send_cmd(cmd, pmcraid_init_res_table,
PMCRAID_INTERNAL_TIMEOUT, pmcraid_timeout_handler);
}
/**
* pmcraid_probe - PCI probe entry pointer for PMC MaxRAID controller driver
* @pdev: pointer to pci device structure
* @dev_id: pointer to device ids structure
*
* Return Value
* returns 0 if the device is claimed and successfully configured.
* returns non-zero error code in case of any failure
*/
static int pmcraid_probe(struct pci_dev *pdev,
const struct pci_device_id *dev_id)
{
struct pmcraid_instance *pinstance;
struct Scsi_Host *host;
void __iomem *mapped_pci_addr;
int rc = PCIBIOS_SUCCESSFUL;
if (atomic_read(&pmcraid_adapter_count) >= PMCRAID_MAX_ADAPTERS) {
pmcraid_err
("maximum number(%d) of supported adapters reached\n",
atomic_read(&pmcraid_adapter_count));
return -ENOMEM;
}
atomic_inc(&pmcraid_adapter_count);
rc = pci_enable_device(pdev);
if (rc) {
dev_err(&pdev->dev, "Cannot enable adapter\n");
atomic_dec(&pmcraid_adapter_count);
return rc;
}
dev_info(&pdev->dev,
"Found new IOA(%x:%x), Total IOA count: %d\n",
pdev->vendor, pdev->device,
atomic_read(&pmcraid_adapter_count));
rc = pci_request_regions(pdev, PMCRAID_DRIVER_NAME);
if (rc < 0) {
dev_err(&pdev->dev,
"Couldn't register memory range of registers\n");
goto out_disable_device;
}
mapped_pci_addr = pci_iomap(pdev, 0, 0);
if (!mapped_pci_addr) {
dev_err(&pdev->dev, "Couldn't map PCI registers memory\n");
rc = -ENOMEM;
goto out_release_regions;
}
pci_set_master(pdev);
/* Firmware requires the system bus address of IOARCB to be within
* 32-bit addressable range though it has 64-bit IOARRIN register.
* However, firmware supports 64-bit streaming DMA buffers, whereas
* coherent buffers are to be 32-bit. Since dma_alloc_coherent always
* returns memory within 4GB (if not, change this logic), coherent
* buffers are within firmware acceptable address ranges.
*/
if (sizeof(dma_addr_t) == 4 ||
dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)))
rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
/* firmware expects 32-bit DMA addresses for IOARRIN register; set 32
* bit mask for dma_alloc_coherent to return addresses within 4GB
*/
if (rc == 0)
rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc != 0) {
dev_err(&pdev->dev, "Failed to set PCI DMA mask\n");
goto cleanup_nomem;
}
host = scsi_host_alloc(&pmcraid_host_template,
sizeof(struct pmcraid_instance));
if (!host) {
dev_err(&pdev->dev, "scsi_host_alloc failed!\n");
rc = -ENOMEM;
goto cleanup_nomem;
}
host->max_id = PMCRAID_MAX_NUM_TARGETS_PER_BUS;
host->max_lun = PMCRAID_MAX_NUM_LUNS_PER_TARGET;
host->unique_id = host->host_no;
host->max_channel = PMCRAID_MAX_BUS_TO_SCAN;
host->max_cmd_len = PMCRAID_MAX_CDB_LEN;
/* zero out entire instance structure */
pinstance = (struct pmcraid_instance *)host->hostdata;
memset(pinstance, 0, sizeof(*pinstance));
pinstance->chip_cfg =
(struct pmcraid_chip_details *)(dev_id->driver_data);
rc = pmcraid_init_instance(pdev, host, mapped_pci_addr);
if (rc < 0) {
dev_err(&pdev->dev, "failed to initialize adapter instance\n");
goto out_scsi_host_put;
}
pci_set_drvdata(pdev, pinstance);
/* Save PCI config-space for use following the reset */
rc = pci_save_state(pinstance->pdev);
if (rc != 0) {
dev_err(&pdev->dev, "Failed to save PCI config space\n");
goto out_scsi_host_put;
}
pmcraid_disable_interrupts(pinstance, ~0);
rc = pmcraid_register_interrupt_handler(pinstance);
if (rc) {
dev_err(&pdev->dev, "couldn't register interrupt handler\n");
goto out_scsi_host_put;
}
pmcraid_init_tasklets(pinstance);
/* allocate verious buffers used by LLD.*/
rc = pmcraid_init_buffers(pinstance);
if (rc) {
pmcraid_err("couldn't allocate memory blocks\n");
goto out_unregister_isr;
}
/* check the reset type required */
pmcraid_reset_type(pinstance);
pmcraid_enable_interrupts(pinstance, PMCRAID_PCI_INTERRUPTS);
/* Start IOA firmware initialization and bring card to Operational
* state.
*/
pmcraid_info("starting IOA initialization sequence\n");
if (pmcraid_reset_bringup(pinstance)) {
dev_err(&pdev->dev, "couldn't initialize IOA\n");
rc = 1;
goto out_release_bufs;
}
/* Add adapter instance into mid-layer list */
rc = scsi_add_host(pinstance->host, &pdev->dev);
if (rc != 0) {
pmcraid_err("couldn't add host into mid-layer: %d\n", rc);
goto out_release_bufs;
}
scsi_scan_host(pinstance->host);
rc = pmcraid_setup_chrdev(pinstance);
if (rc != 0) {
pmcraid_err("couldn't create mgmt interface, error: %x\n",
rc);
goto out_remove_host;
}
/* Schedule worker thread to handle CCN and take care of adding and
* removing devices to OS
*/
atomic_set(&pinstance->expose_resources, 1);
schedule_work(&pinstance->worker_q);
return rc;
out_remove_host:
scsi_remove_host(host);
out_release_bufs:
pmcraid_release_buffers(pinstance);
out_unregister_isr:
pmcraid_kill_tasklets(pinstance);
pmcraid_unregister_interrupt_handler(pinstance);
out_scsi_host_put:
scsi_host_put(host);
cleanup_nomem:
iounmap(mapped_pci_addr);
out_release_regions:
pci_release_regions(pdev);
out_disable_device:
atomic_dec(&pmcraid_adapter_count);
pci_disable_device(pdev);
return -ENODEV;
}
/*
* PCI driver structure of pmcraid driver
*/
static struct pci_driver pmcraid_driver = {
.name = PMCRAID_DRIVER_NAME,
.id_table = pmcraid_pci_table,
.probe = pmcraid_probe,
.remove = pmcraid_remove,
.suspend = pmcraid_suspend,
.resume = pmcraid_resume,
.shutdown = pmcraid_shutdown
};
/**
* pmcraid_init - module load entry point
*/
static int __init pmcraid_init(void)
{
dev_t dev;
int error;
pmcraid_info("%s Device Driver version: %s\n",
PMCRAID_DRIVER_NAME, PMCRAID_DRIVER_VERSION);
error = alloc_chrdev_region(&dev, 0,
PMCRAID_MAX_ADAPTERS,
PMCRAID_DEVFILE);
if (error) {
pmcraid_err("failed to get a major number for adapters\n");
goto out_init;
}
pmcraid_major = MAJOR(dev);
pmcraid_class = class_create(THIS_MODULE, PMCRAID_DEVFILE);
if (IS_ERR(pmcraid_class)) {
error = PTR_ERR(pmcraid_class);
pmcraid_err("failed to register with sysfs, error = %x\n",
error);
goto out_unreg_chrdev;
}
error = pmcraid_netlink_init();
if (error) {
class_destroy(pmcraid_class);
goto out_unreg_chrdev;
}
error = pci_register_driver(&pmcraid_driver);
if (error == 0)
goto out_init;
pmcraid_err("failed to register pmcraid driver, error = %x\n",
error);
class_destroy(pmcraid_class);
pmcraid_netlink_release();
out_unreg_chrdev:
unregister_chrdev_region(MKDEV(pmcraid_major, 0), PMCRAID_MAX_ADAPTERS);
out_init:
return error;
}
/**
* pmcraid_exit - module unload entry point
*/
static void __exit pmcraid_exit(void)
{
pmcraid_netlink_release();
unregister_chrdev_region(MKDEV(pmcraid_major, 0),
PMCRAID_MAX_ADAPTERS);
pci_unregister_driver(&pmcraid_driver);
class_destroy(pmcraid_class);
}
module_init(pmcraid_init);
module_exit(pmcraid_exit);
Reference in New Issue View Git Blame Copy Permalink