mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 17:15:09 +07:00
b96a696fb2
Fix that bananapi-r2 booting from SD-card would fail since incorrect
polarity is applied to the previous setup with GPIO_ACTIVE_HIGH.
Cc: stable@vger.kernel.org
Fixes: 0eed8d0976 ("arm: dts: mt7623: Add SD-card and EMMC to bananapi-r2")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
488 lines
9.2 KiB
Plaintext
488 lines
9.2 KiB
Plaintext
/*
|
|
* Copyright 2017 Sean Wang <sean.wang@mediatek.com>
|
|
*
|
|
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/input/input.h>
|
|
#include "mt7623.dtsi"
|
|
#include "mt6323.dtsi"
|
|
|
|
/ {
|
|
model = "Bananapi BPI-R2";
|
|
compatible = "bananapi,bpi-r2", "mediatek,mt7623";
|
|
|
|
aliases {
|
|
serial2 = &uart2;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial2:115200n8";
|
|
};
|
|
|
|
cpus {
|
|
cpu@0 {
|
|
proc-supply = <&mt6323_vproc_reg>;
|
|
};
|
|
|
|
cpu@1 {
|
|
proc-supply = <&mt6323_vproc_reg>;
|
|
};
|
|
|
|
cpu@2 {
|
|
proc-supply = <&mt6323_vproc_reg>;
|
|
};
|
|
|
|
cpu@3 {
|
|
proc-supply = <&mt6323_vproc_reg>;
|
|
};
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&key_pins_a>;
|
|
|
|
factory {
|
|
label = "factory";
|
|
linux,code = <BTN_0>;
|
|
gpios = <&pio 256 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wps {
|
|
label = "wps";
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&led_pins_a>;
|
|
|
|
blue {
|
|
label = "bpi-r2:pio:blue";
|
|
gpios = <&pio 241 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
green {
|
|
label = "bpi-r2:pio:green";
|
|
gpios = <&pio 240 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
red {
|
|
label = "bpi-r2:pio:red";
|
|
gpios = <&pio 239 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
memory@80000000 {
|
|
reg = <0 0x80000000 0 0x40000000>;
|
|
};
|
|
};
|
|
|
|
&cir {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cir_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
&crypto {
|
|
status = "okay";
|
|
};
|
|
|
|
ð {
|
|
status = "okay";
|
|
|
|
gmac0: mac@0 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <0>;
|
|
phy-mode = "trgmii";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
|
|
mdio: mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
switch@0 {
|
|
compatible = "mediatek,mt7530";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
pinctrl-names = "default";
|
|
reset-gpios = <&pio 33 0>;
|
|
core-supply = <&mt6323_vpa_reg>;
|
|
io-supply = <&mt6323_vemc3v3_reg>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "wan";
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan0";
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan1";
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "lan2";
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
label = "lan3";
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
label = "cpu";
|
|
ethernet = <&gmac0>;
|
|
phy-mode = "trgmii";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc0 {
|
|
pinctrl-names = "default", "state_uhs";
|
|
pinctrl-0 = <&mmc0_pins_default>;
|
|
pinctrl-1 = <&mmc0_pins_uhs>;
|
|
status = "okay";
|
|
bus-width = <8>;
|
|
max-frequency = <50000000>;
|
|
cap-mmc-highspeed;
|
|
vmmc-supply = <&mt6323_vemc3v3_reg>;
|
|
vqmmc-supply = <&mt6323_vio18_reg>;
|
|
non-removable;
|
|
};
|
|
|
|
&mmc1 {
|
|
pinctrl-names = "default", "state_uhs";
|
|
pinctrl-0 = <&mmc1_pins_default>;
|
|
pinctrl-1 = <&mmc1_pins_uhs>;
|
|
status = "okay";
|
|
bus-width = <4>;
|
|
max-frequency = <50000000>;
|
|
cap-sd-highspeed;
|
|
cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
|
|
vmmc-supply = <&mt6323_vmch_reg>;
|
|
vqmmc-supply = <&mt6323_vio18_reg>;
|
|
};
|
|
|
|
&pio {
|
|
cir_pins_a:cir@0 {
|
|
pins_cir {
|
|
pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2c0_pins_a: i2c@0 {
|
|
pins_i2c0 {
|
|
pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
|
|
<MT7623_PIN_76_SCL0_FUNC_SCL0>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2c1_pins_a: i2c@1 {
|
|
pin_i2c1 {
|
|
pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>,
|
|
<MT7623_PIN_58_SCL1_FUNC_SCL1>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2s0_pins_a: i2s@0 {
|
|
pin_i2s0 {
|
|
pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
|
|
<MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>,
|
|
<MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>,
|
|
<MT7623_PIN_74_I2S0_BCK_FUNC_I2S0_BCK>,
|
|
<MT7623_PIN_126_I2S0_MCLK_FUNC_I2S0_MCLK>;
|
|
drive-strength = <MTK_DRIVE_12mA>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
i2s1_pins_a: i2s@1 {
|
|
pin_i2s1 {
|
|
pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>,
|
|
<MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>,
|
|
<MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>,
|
|
<MT7623_PIN_36_I2S1_LRCK_FUNC_I2S1_LRCK>,
|
|
<MT7623_PIN_37_I2S1_MCLK_FUNC_I2S1_MCLK>;
|
|
drive-strength = <MTK_DRIVE_12mA>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
key_pins_a: keys@0 {
|
|
pins_keys {
|
|
pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
|
|
<MT7623_PIN_257_GPIO257_FUNC_GPIO257> ;
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
led_pins_a: leds@0 {
|
|
pins_leds {
|
|
pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>,
|
|
<MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>,
|
|
<MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>;
|
|
};
|
|
};
|
|
|
|
mmc0_pins_default: mmc0default {
|
|
pins_cmd_dat {
|
|
pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
|
|
<MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
|
|
<MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
|
|
<MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
|
|
<MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
|
|
<MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
|
|
<MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
|
|
<MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
|
|
<MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
|
|
input-enable;
|
|
bias-pull-up;
|
|
};
|
|
|
|
pins_clk {
|
|
pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
pins_rst {
|
|
pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
mmc0_pins_uhs: mmc0 {
|
|
pins_cmd_dat {
|
|
pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
|
|
<MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
|
|
<MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
|
|
<MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
|
|
<MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
|
|
<MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
|
|
<MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
|
|
<MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
|
|
<MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
|
|
input-enable;
|
|
drive-strength = <MTK_DRIVE_2mA>;
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
|
};
|
|
|
|
pins_clk {
|
|
pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
|
|
drive-strength = <MTK_DRIVE_2mA>;
|
|
bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
|
|
};
|
|
|
|
pins_rst {
|
|
pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
mmc1_pins_default: mmc1default {
|
|
pins_cmd_dat {
|
|
pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
|
|
<MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
|
|
<MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
|
|
<MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
|
|
<MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
|
|
input-enable;
|
|
drive-strength = <MTK_DRIVE_4mA>;
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
|
|
};
|
|
|
|
pins_clk {
|
|
pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
|
|
bias-pull-down;
|
|
drive-strength = <MTK_DRIVE_4mA>;
|
|
};
|
|
|
|
pins_wp {
|
|
pinmux = <MT7623_PIN_29_EINT7_FUNC_MSDC1_WP>;
|
|
input-enable;
|
|
bias-pull-up;
|
|
};
|
|
|
|
pins_insert {
|
|
pinmux = <MT7623_PIN_261_MSDC1_INS_FUNC_GPIO261>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
mmc1_pins_uhs: mmc1 {
|
|
pins_cmd_dat {
|
|
pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
|
|
<MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
|
|
<MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
|
|
<MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
|
|
<MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
|
|
input-enable;
|
|
drive-strength = <MTK_DRIVE_4mA>;
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
|
|
};
|
|
|
|
pins_clk {
|
|
pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
|
|
drive-strength = <MTK_DRIVE_4mA>;
|
|
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
|
};
|
|
};
|
|
|
|
pwm_pins_a: pwm@0 {
|
|
pins_pwm {
|
|
pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
|
|
<MT7623_PIN_204_PWM1_FUNC_PWM1>,
|
|
<MT7623_PIN_205_PWM2_FUNC_PWM2>,
|
|
<MT7623_PIN_206_PWM3_FUNC_PWM3>,
|
|
<MT7623_PIN_207_PWM4_FUNC_PWM4>;
|
|
};
|
|
};
|
|
|
|
spi0_pins_a: spi@0 {
|
|
pins_spi {
|
|
pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
|
|
<MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
|
|
<MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
|
|
<MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
uart0_pins_a: uart@0 {
|
|
pins_dat {
|
|
pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
|
|
<MT7623_PIN_80_UTXD0_FUNC_UTXD0>;
|
|
};
|
|
};
|
|
|
|
uart1_pins_a: uart@1 {
|
|
pins_dat {
|
|
pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
|
|
<MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwrap {
|
|
mt6323 {
|
|
mt6323led: led {
|
|
compatible = "mediatek,mt6323-led";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led@0 {
|
|
reg = <0>;
|
|
label = "bpi-r2:isink:green";
|
|
default-state = "off";
|
|
};
|
|
|
|
led@1 {
|
|
reg = <1>;
|
|
label = "bpi-r2:isink:red";
|
|
default-state = "off";
|
|
};
|
|
|
|
led@2 {
|
|
reg = <2>;
|
|
label = "bpi-r2:isink:blue";
|
|
default-state = "off";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins_a>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_pins_a>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb1 {
|
|
vusb33-supply = <&mt6323_vusb_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2 {
|
|
vusb33-supply = <&mt6323_vusb_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u3phy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u3phy2 {
|
|
status = "okay";
|
|
};
|
|
|