mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 09:56:40 +07:00
5a0e3ad6af
percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
1252 lines
34 KiB
C
1252 lines
34 KiB
C
/* $Id: elsa.c,v 2.32.2.4 2004/01/24 20:47:21 keil Exp $
|
|
*
|
|
* low level stuff for Elsa isdn cards
|
|
*
|
|
* Author Karsten Keil
|
|
* Copyright by Karsten Keil <keil@isdn4linux.de>
|
|
*
|
|
* This software may be used and distributed according to the terms
|
|
* of the GNU General Public License, incorporated herein by reference.
|
|
*
|
|
* For changes and modifications please read
|
|
* Documentation/isdn/HiSax.cert
|
|
*
|
|
* Thanks to Elsa GmbH for documents and information
|
|
*
|
|
* Klaus Lichtenwalder (Klaus.Lichtenwalder@WebForum.DE)
|
|
* for ELSA PCMCIA support
|
|
*
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include "hisax.h"
|
|
#include "arcofi.h"
|
|
#include "isac.h"
|
|
#include "ipac.h"
|
|
#include "hscx.h"
|
|
#include "isdnl1.h"
|
|
#include <linux/pci.h>
|
|
#include <linux/isapnp.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/serial_reg.h>
|
|
|
|
static const char *Elsa_revision = "$Revision: 2.32.2.4 $";
|
|
static const char *Elsa_Types[] =
|
|
{"None", "PC", "PCC-8", "PCC-16", "PCF", "PCF-Pro",
|
|
"PCMCIA", "QS 1000", "QS 3000", "Microlink PCI", "QS 3000 PCI",
|
|
"PCMCIA-IPAC" };
|
|
|
|
static const char *ITACVer[] =
|
|
{"?0?", "?1?", "?2?", "?3?", "?4?", "V2.2",
|
|
"B1", "A1"};
|
|
|
|
#define byteout(addr,val) outb(val,addr)
|
|
#define bytein(addr) inb(addr)
|
|
|
|
#define ELSA_ISAC 0
|
|
#define ELSA_ISAC_PCM 1
|
|
#define ELSA_ITAC 1
|
|
#define ELSA_HSCX 2
|
|
#define ELSA_ALE 3
|
|
#define ELSA_ALE_PCM 4
|
|
#define ELSA_CONTROL 4
|
|
#define ELSA_CONFIG 5
|
|
#define ELSA_START_TIMER 6
|
|
#define ELSA_TRIG_IRQ 7
|
|
|
|
#define ELSA_PC 1
|
|
#define ELSA_PCC8 2
|
|
#define ELSA_PCC16 3
|
|
#define ELSA_PCF 4
|
|
#define ELSA_PCFPRO 5
|
|
#define ELSA_PCMCIA 6
|
|
#define ELSA_QS1000 7
|
|
#define ELSA_QS3000 8
|
|
#define ELSA_QS1000PCI 9
|
|
#define ELSA_QS3000PCI 10
|
|
#define ELSA_PCMCIA_IPAC 11
|
|
|
|
/* PCI stuff */
|
|
#define ELSA_PCI_IRQ_MASK 0x04
|
|
|
|
/* ITAC Registeradressen (only Microlink PC) */
|
|
#define ITAC_SYS 0x34
|
|
#define ITAC_ISEN 0x48
|
|
#define ITAC_RFIE 0x4A
|
|
#define ITAC_XFIE 0x4C
|
|
#define ITAC_SCIE 0x4E
|
|
#define ITAC_STIE 0x46
|
|
|
|
/*** ***
|
|
*** Makros als Befehle fuer die Kartenregister ***
|
|
*** (mehrere Befehle werden durch Bit-Oderung kombiniert) ***
|
|
*** ***/
|
|
|
|
/* Config-Register (Read) */
|
|
#define ELIRQF_TIMER_RUN 0x02 /* Bit 1 des Config-Reg */
|
|
#define ELIRQF_TIMER_RUN_PCC8 0x01 /* Bit 0 des Config-Reg bei PCC */
|
|
#define ELSA_IRQ_IDX 0x38 /* Bit 3,4,5 des Config-Reg */
|
|
#define ELSA_IRQ_IDX_PCC8 0x30 /* Bit 4,5 des Config-Reg */
|
|
#define ELSA_IRQ_IDX_PC 0x0c /* Bit 2,3 des Config-Reg */
|
|
|
|
/* Control-Register (Write) */
|
|
#define ELSA_LINE_LED 0x02 /* Bit 1 Gelbe LED */
|
|
#define ELSA_STAT_LED 0x08 /* Bit 3 Gruene LED */
|
|
#define ELSA_ISDN_RESET 0x20 /* Bit 5 Reset-Leitung */
|
|
#define ELSA_ENA_TIMER_INT 0x80 /* Bit 7 Freigabe Timer Interrupt */
|
|
|
|
/* ALE-Register (Read) */
|
|
#define ELSA_HW_RELEASE 0x07 /* Bit 0-2 Hardwarerkennung */
|
|
#define ELSA_S0_POWER_BAD 0x08 /* Bit 3 S0-Bus Spannung fehlt */
|
|
|
|
/* Status Flags */
|
|
#define ELIRQF_TIMER_AKTIV 1
|
|
#define ELSA_BAD_PWR 2
|
|
#define ELSA_ASSIGN 4
|
|
|
|
#define RS_ISR_PASS_LIMIT 256
|
|
#define FLG_MODEM_ACTIVE 1
|
|
/* IPAC AUX */
|
|
#define ELSA_IPAC_LINE_LED 0x40 /* Bit 6 Gelbe LED */
|
|
#define ELSA_IPAC_STAT_LED 0x80 /* Bit 7 Gruene LED */
|
|
|
|
#if ARCOFI_USE
|
|
static struct arcofi_msg ARCOFI_XOP_F =
|
|
{NULL,0,2,{0xa1,0x3f,0,0,0,0,0,0,0,0}}; /* Normal OP */
|
|
static struct arcofi_msg ARCOFI_XOP_1 =
|
|
{&ARCOFI_XOP_F,0,2,{0xa1,0x31,0,0,0,0,0,0,0,0}}; /* PWR UP */
|
|
static struct arcofi_msg ARCOFI_SOP_F =
|
|
{&ARCOFI_XOP_1,0,10,{0xa1,0x1f,0x00,0x50,0x10,0x00,0x00,0x80,0x02,0x12}};
|
|
static struct arcofi_msg ARCOFI_COP_9 =
|
|
{&ARCOFI_SOP_F,0,10,{0xa1,0x29,0x80,0xcb,0xe9,0x88,0x00,0xc8,0xd8,0x80}}; /* RX */
|
|
static struct arcofi_msg ARCOFI_COP_8 =
|
|
{&ARCOFI_COP_9,0,10,{0xa1,0x28,0x49,0x31,0x8,0x13,0x6e,0x88,0x2a,0x61}}; /* TX */
|
|
static struct arcofi_msg ARCOFI_COP_7 =
|
|
{&ARCOFI_COP_8,0,4,{0xa1,0x27,0x80,0x80,0,0,0,0,0,0}}; /* GZ */
|
|
static struct arcofi_msg ARCOFI_COP_6 =
|
|
{&ARCOFI_COP_7,0,6,{0xa1,0x26,0,0,0x82,0x7c,0,0,0,0}}; /* GRL GRH */
|
|
static struct arcofi_msg ARCOFI_COP_5 =
|
|
{&ARCOFI_COP_6,0,4,{0xa1,0x25,0xbb,0x4a,0,0,0,0,0,0}}; /* GTX */
|
|
static struct arcofi_msg ARCOFI_VERSION =
|
|
{NULL,1,2,{0xa0,0,0,0,0,0,0,0,0,0}};
|
|
static struct arcofi_msg ARCOFI_XOP_0 =
|
|
{NULL,0,2,{0xa1,0x30,0,0,0,0,0,0,0,0}}; /* PWR Down */
|
|
|
|
static void set_arcofi(struct IsdnCardState *cs, int bc);
|
|
|
|
#include "elsa_ser.c"
|
|
#endif /* ARCOFI_USE */
|
|
|
|
static inline u_char
|
|
readreg(unsigned int ale, unsigned int adr, u_char off)
|
|
{
|
|
register u_char ret;
|
|
|
|
byteout(ale, off);
|
|
ret = bytein(adr);
|
|
return (ret);
|
|
}
|
|
|
|
static inline void
|
|
readfifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
|
|
{
|
|
byteout(ale, off);
|
|
insb(adr, data, size);
|
|
}
|
|
|
|
|
|
static inline void
|
|
writereg(unsigned int ale, unsigned int adr, u_char off, u_char data)
|
|
{
|
|
byteout(ale, off);
|
|
byteout(adr, data);
|
|
}
|
|
|
|
static inline void
|
|
writefifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
|
|
{
|
|
byteout(ale, off);
|
|
outsb(adr, data, size);
|
|
}
|
|
|
|
/* Interface functions */
|
|
|
|
static u_char
|
|
ReadISAC(struct IsdnCardState *cs, u_char offset)
|
|
{
|
|
return (readreg(cs->hw.elsa.ale, cs->hw.elsa.isac, offset));
|
|
}
|
|
|
|
static void
|
|
WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
|
|
{
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, offset, value);
|
|
}
|
|
|
|
static void
|
|
ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size)
|
|
{
|
|
readfifo(cs->hw.elsa.ale, cs->hw.elsa.isac, 0, data, size);
|
|
}
|
|
|
|
static void
|
|
WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
|
|
{
|
|
writefifo(cs->hw.elsa.ale, cs->hw.elsa.isac, 0, data, size);
|
|
}
|
|
|
|
static u_char
|
|
ReadISAC_IPAC(struct IsdnCardState *cs, u_char offset)
|
|
{
|
|
return (readreg(cs->hw.elsa.ale, cs->hw.elsa.isac, offset+0x80));
|
|
}
|
|
|
|
static void
|
|
WriteISAC_IPAC(struct IsdnCardState *cs, u_char offset, u_char value)
|
|
{
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, offset|0x80, value);
|
|
}
|
|
|
|
static void
|
|
ReadISACfifo_IPAC(struct IsdnCardState *cs, u_char * data, int size)
|
|
{
|
|
readfifo(cs->hw.elsa.ale, cs->hw.elsa.isac, 0x80, data, size);
|
|
}
|
|
|
|
static void
|
|
WriteISACfifo_IPAC(struct IsdnCardState *cs, u_char * data, int size)
|
|
{
|
|
writefifo(cs->hw.elsa.ale, cs->hw.elsa.isac, 0x80, data, size);
|
|
}
|
|
|
|
static u_char
|
|
ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset)
|
|
{
|
|
return (readreg(cs->hw.elsa.ale,
|
|
cs->hw.elsa.hscx, offset + (hscx ? 0x40 : 0)));
|
|
}
|
|
|
|
static void
|
|
WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
|
|
{
|
|
writereg(cs->hw.elsa.ale,
|
|
cs->hw.elsa.hscx, offset + (hscx ? 0x40 : 0), value);
|
|
}
|
|
|
|
static inline u_char
|
|
readitac(struct IsdnCardState *cs, u_char off)
|
|
{
|
|
register u_char ret;
|
|
|
|
byteout(cs->hw.elsa.ale, off);
|
|
ret = bytein(cs->hw.elsa.itac);
|
|
return (ret);
|
|
}
|
|
|
|
static inline void
|
|
writeitac(struct IsdnCardState *cs, u_char off, u_char data)
|
|
{
|
|
byteout(cs->hw.elsa.ale, off);
|
|
byteout(cs->hw.elsa.itac, data);
|
|
}
|
|
|
|
static inline int
|
|
TimerRun(struct IsdnCardState *cs)
|
|
{
|
|
register u_char v;
|
|
|
|
v = bytein(cs->hw.elsa.cfg);
|
|
if ((cs->subtyp == ELSA_QS1000) || (cs->subtyp == ELSA_QS3000))
|
|
return (0 == (v & ELIRQF_TIMER_RUN));
|
|
else if (cs->subtyp == ELSA_PCC8)
|
|
return (v & ELIRQF_TIMER_RUN_PCC8);
|
|
return (v & ELIRQF_TIMER_RUN);
|
|
}
|
|
/*
|
|
* fast interrupt HSCX stuff goes here
|
|
*/
|
|
|
|
#define READHSCX(cs, nr, reg) readreg(cs->hw.elsa.ale, \
|
|
cs->hw.elsa.hscx, reg + (nr ? 0x40 : 0))
|
|
#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.elsa.ale, \
|
|
cs->hw.elsa.hscx, reg + (nr ? 0x40 : 0), data)
|
|
|
|
#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.elsa.ale, \
|
|
cs->hw.elsa.hscx, (nr ? 0x40 : 0), ptr, cnt)
|
|
|
|
#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.elsa.ale, \
|
|
cs->hw.elsa.hscx, (nr ? 0x40 : 0), ptr, cnt)
|
|
|
|
#include "hscx_irq.c"
|
|
|
|
static irqreturn_t
|
|
elsa_interrupt(int intno, void *dev_id)
|
|
{
|
|
struct IsdnCardState *cs = dev_id;
|
|
u_long flags;
|
|
u_char val;
|
|
int icnt=5;
|
|
|
|
if ((cs->typ == ISDN_CTYPE_ELSA_PCMCIA) && (*cs->busy_flag == 1)) {
|
|
/* The card tends to generate interrupts while being removed
|
|
causing us to just crash the kernel. bad. */
|
|
printk(KERN_WARNING "Elsa: card not available!\n");
|
|
return IRQ_NONE;
|
|
}
|
|
spin_lock_irqsave(&cs->lock, flags);
|
|
#if ARCOFI_USE
|
|
if (cs->hw.elsa.MFlag) {
|
|
val = serial_inp(cs, UART_IIR);
|
|
if (!(val & UART_IIR_NO_INT)) {
|
|
debugl1(cs,"IIR %02x", val);
|
|
rs_interrupt_elsa(cs);
|
|
}
|
|
}
|
|
#endif
|
|
val = readreg(cs->hw.elsa.ale, cs->hw.elsa.hscx, HSCX_ISTA + 0x40);
|
|
Start_HSCX:
|
|
if (val) {
|
|
hscx_int_main(cs, val);
|
|
}
|
|
val = readreg(cs->hw.elsa.ale, cs->hw.elsa.isac, ISAC_ISTA);
|
|
Start_ISAC:
|
|
if (val) {
|
|
isac_interrupt(cs, val);
|
|
}
|
|
val = readreg(cs->hw.elsa.ale, cs->hw.elsa.hscx, HSCX_ISTA + 0x40);
|
|
if (val && icnt) {
|
|
if (cs->debug & L1_DEB_HSCX)
|
|
debugl1(cs, "HSCX IntStat after IntRoutine");
|
|
icnt--;
|
|
goto Start_HSCX;
|
|
}
|
|
val = readreg(cs->hw.elsa.ale, cs->hw.elsa.isac, ISAC_ISTA);
|
|
if (val && icnt) {
|
|
if (cs->debug & L1_DEB_ISAC)
|
|
debugl1(cs, "ISAC IntStat after IntRoutine");
|
|
icnt--;
|
|
goto Start_ISAC;
|
|
}
|
|
if (!icnt)
|
|
printk(KERN_WARNING"ELSA IRQ LOOP\n");
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.hscx, HSCX_MASK, 0xFF);
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.hscx, HSCX_MASK + 0x40, 0xFF);
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, ISAC_MASK, 0xFF);
|
|
if (cs->hw.elsa.status & ELIRQF_TIMER_AKTIV) {
|
|
if (!TimerRun(cs)) {
|
|
/* Timer Restart */
|
|
byteout(cs->hw.elsa.timer, 0);
|
|
cs->hw.elsa.counter++;
|
|
}
|
|
}
|
|
#if ARCOFI_USE
|
|
if (cs->hw.elsa.MFlag) {
|
|
val = serial_inp(cs, UART_MCR);
|
|
val ^= 0x8;
|
|
serial_outp(cs, UART_MCR, val);
|
|
val = serial_inp(cs, UART_MCR);
|
|
val ^= 0x8;
|
|
serial_outp(cs, UART_MCR, val);
|
|
}
|
|
#endif
|
|
if (cs->hw.elsa.trig)
|
|
byteout(cs->hw.elsa.trig, 0x00);
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.hscx, HSCX_MASK, 0x0);
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.hscx, HSCX_MASK + 0x40, 0x0);
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, ISAC_MASK, 0x0);
|
|
spin_unlock_irqrestore(&cs->lock, flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t
|
|
elsa_interrupt_ipac(int intno, void *dev_id)
|
|
{
|
|
struct IsdnCardState *cs = dev_id;
|
|
u_long flags;
|
|
u_char ista,val;
|
|
int icnt=5;
|
|
|
|
spin_lock_irqsave(&cs->lock, flags);
|
|
if (cs->subtyp == ELSA_QS1000PCI || cs->subtyp == ELSA_QS3000PCI) {
|
|
val = bytein(cs->hw.elsa.cfg + 0x4c); /* PCI IRQ */
|
|
if (!(val & ELSA_PCI_IRQ_MASK)) {
|
|
spin_unlock_irqrestore(&cs->lock, flags);
|
|
return IRQ_NONE;
|
|
}
|
|
}
|
|
#if ARCOFI_USE
|
|
if (cs->hw.elsa.MFlag) {
|
|
val = serial_inp(cs, UART_IIR);
|
|
if (!(val & UART_IIR_NO_INT)) {
|
|
debugl1(cs,"IIR %02x", val);
|
|
rs_interrupt_elsa(cs);
|
|
}
|
|
}
|
|
#endif
|
|
ista = readreg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_ISTA);
|
|
Start_IPAC:
|
|
if (cs->debug & L1_DEB_IPAC)
|
|
debugl1(cs, "IPAC ISTA %02X", ista);
|
|
if (ista & 0x0f) {
|
|
val = readreg(cs->hw.elsa.ale, cs->hw.elsa.hscx, HSCX_ISTA + 0x40);
|
|
if (ista & 0x01)
|
|
val |= 0x01;
|
|
if (ista & 0x04)
|
|
val |= 0x02;
|
|
if (ista & 0x08)
|
|
val |= 0x04;
|
|
if (val)
|
|
hscx_int_main(cs, val);
|
|
}
|
|
if (ista & 0x20) {
|
|
val = 0xfe & readreg(cs->hw.elsa.ale, cs->hw.elsa.isac, ISAC_ISTA + 0x80);
|
|
if (val) {
|
|
isac_interrupt(cs, val);
|
|
}
|
|
}
|
|
if (ista & 0x10) {
|
|
val = 0x01;
|
|
isac_interrupt(cs, val);
|
|
}
|
|
ista = readreg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_ISTA);
|
|
if ((ista & 0x3f) && icnt) {
|
|
icnt--;
|
|
goto Start_IPAC;
|
|
}
|
|
if (!icnt)
|
|
printk(KERN_WARNING "ELSA IRQ LOOP\n");
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_MASK, 0xFF);
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_MASK, 0xC0);
|
|
spin_unlock_irqrestore(&cs->lock, flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void
|
|
release_io_elsa(struct IsdnCardState *cs)
|
|
{
|
|
int bytecnt = 8;
|
|
|
|
del_timer(&cs->hw.elsa.tl);
|
|
#if ARCOFI_USE
|
|
clear_arcofi(cs);
|
|
#endif
|
|
if (cs->hw.elsa.ctrl)
|
|
byteout(cs->hw.elsa.ctrl, 0); /* LEDs Out */
|
|
if (cs->subtyp == ELSA_QS1000PCI) {
|
|
byteout(cs->hw.elsa.cfg + 0x4c, 0x01); /* disable IRQ */
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_ATX, 0xff);
|
|
bytecnt = 2;
|
|
release_region(cs->hw.elsa.cfg, 0x80);
|
|
}
|
|
if (cs->subtyp == ELSA_QS3000PCI) {
|
|
byteout(cs->hw.elsa.cfg + 0x4c, 0x03); /* disable ELSA PCI IRQ */
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_ATX, 0xff);
|
|
release_region(cs->hw.elsa.cfg, 0x80);
|
|
}
|
|
if (cs->subtyp == ELSA_PCMCIA_IPAC) {
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_ATX, 0xff);
|
|
}
|
|
if ((cs->subtyp == ELSA_PCFPRO) ||
|
|
(cs->subtyp == ELSA_QS3000) ||
|
|
(cs->subtyp == ELSA_PCF) ||
|
|
(cs->subtyp == ELSA_QS3000PCI)) {
|
|
bytecnt = 16;
|
|
#if ARCOFI_USE
|
|
release_modem(cs);
|
|
#endif
|
|
}
|
|
if (cs->hw.elsa.base)
|
|
release_region(cs->hw.elsa.base, bytecnt);
|
|
}
|
|
|
|
static void
|
|
reset_elsa(struct IsdnCardState *cs)
|
|
{
|
|
if (cs->hw.elsa.timer) {
|
|
/* Wait 1 Timer */
|
|
byteout(cs->hw.elsa.timer, 0);
|
|
while (TimerRun(cs));
|
|
cs->hw.elsa.ctrl_reg |= 0x50;
|
|
cs->hw.elsa.ctrl_reg &= ~ELSA_ISDN_RESET; /* Reset On */
|
|
byteout(cs->hw.elsa.ctrl, cs->hw.elsa.ctrl_reg);
|
|
/* Wait 1 Timer */
|
|
byteout(cs->hw.elsa.timer, 0);
|
|
while (TimerRun(cs));
|
|
cs->hw.elsa.ctrl_reg |= ELSA_ISDN_RESET; /* Reset Off */
|
|
byteout(cs->hw.elsa.ctrl, cs->hw.elsa.ctrl_reg);
|
|
/* Wait 1 Timer */
|
|
byteout(cs->hw.elsa.timer, 0);
|
|
while (TimerRun(cs));
|
|
if (cs->hw.elsa.trig)
|
|
byteout(cs->hw.elsa.trig, 0xff);
|
|
}
|
|
if ((cs->subtyp == ELSA_QS1000PCI) || (cs->subtyp == ELSA_QS3000PCI) || (cs->subtyp == ELSA_PCMCIA_IPAC)) {
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_POTA2, 0x20);
|
|
mdelay(10);
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_POTA2, 0x00);
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_MASK, 0xc0);
|
|
mdelay(10);
|
|
if (cs->subtyp != ELSA_PCMCIA_IPAC) {
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_ACFG, 0x0);
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_AOE, 0x3c);
|
|
} else {
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_PCFG, 0x10);
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_ACFG, 0x4);
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_AOE, 0xf8);
|
|
}
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_ATX, 0xff);
|
|
if (cs->subtyp == ELSA_QS1000PCI)
|
|
byteout(cs->hw.elsa.cfg + 0x4c, 0x41); /* enable ELSA PCI IRQ */
|
|
else if (cs->subtyp == ELSA_QS3000PCI)
|
|
byteout(cs->hw.elsa.cfg + 0x4c, 0x43); /* enable ELSA PCI IRQ */
|
|
}
|
|
}
|
|
|
|
#if ARCOFI_USE
|
|
|
|
static void
|
|
set_arcofi(struct IsdnCardState *cs, int bc) {
|
|
cs->dc.isac.arcofi_bc = bc;
|
|
arcofi_fsm(cs, ARCOFI_START, &ARCOFI_COP_5);
|
|
interruptible_sleep_on(&cs->dc.isac.arcofi_wait);
|
|
}
|
|
|
|
static int
|
|
check_arcofi(struct IsdnCardState *cs)
|
|
{
|
|
int arcofi_present = 0;
|
|
char tmp[40];
|
|
char *t;
|
|
u_char *p;
|
|
|
|
if (!cs->dc.isac.mon_tx)
|
|
if (!(cs->dc.isac.mon_tx=kmalloc(MAX_MON_FRAME, GFP_ATOMIC))) {
|
|
if (cs->debug & L1_DEB_WARN)
|
|
debugl1(cs, "ISAC MON TX out of buffers!");
|
|
return(0);
|
|
}
|
|
cs->dc.isac.arcofi_bc = 0;
|
|
arcofi_fsm(cs, ARCOFI_START, &ARCOFI_VERSION);
|
|
interruptible_sleep_on(&cs->dc.isac.arcofi_wait);
|
|
if (!test_and_clear_bit(FLG_ARCOFI_ERROR, &cs->HW_Flags)) {
|
|
debugl1(cs, "Arcofi response received %d bytes", cs->dc.isac.mon_rxp);
|
|
p = cs->dc.isac.mon_rx;
|
|
t = tmp;
|
|
t += sprintf(tmp, "Arcofi data");
|
|
QuickHex(t, p, cs->dc.isac.mon_rxp);
|
|
debugl1(cs, tmp);
|
|
if ((cs->dc.isac.mon_rxp == 2) && (cs->dc.isac.mon_rx[0] == 0xa0)) {
|
|
switch(cs->dc.isac.mon_rx[1]) {
|
|
case 0x80:
|
|
debugl1(cs, "Arcofi 2160 detected");
|
|
arcofi_present = 1;
|
|
break;
|
|
case 0x82:
|
|
debugl1(cs, "Arcofi 2165 detected");
|
|
arcofi_present = 2;
|
|
break;
|
|
case 0x84:
|
|
debugl1(cs, "Arcofi 2163 detected");
|
|
arcofi_present = 3;
|
|
break;
|
|
default:
|
|
debugl1(cs, "unknown Arcofi response");
|
|
break;
|
|
}
|
|
} else
|
|
debugl1(cs, "undefined Monitor response");
|
|
cs->dc.isac.mon_rxp = 0;
|
|
} else if (cs->dc.isac.mon_tx) {
|
|
debugl1(cs, "Arcofi not detected");
|
|
}
|
|
if (arcofi_present) {
|
|
if (cs->subtyp==ELSA_QS1000) {
|
|
cs->subtyp = ELSA_QS3000;
|
|
printk(KERN_INFO
|
|
"Elsa: %s detected modem at 0x%lx\n",
|
|
Elsa_Types[cs->subtyp],
|
|
cs->hw.elsa.base+8);
|
|
release_region(cs->hw.elsa.base, 8);
|
|
if (!request_region(cs->hw.elsa.base, 16, "elsa isdn modem")) {
|
|
printk(KERN_WARNING
|
|
"HiSax: %s config port %lx-%lx already in use\n",
|
|
Elsa_Types[cs->subtyp],
|
|
cs->hw.elsa.base + 8,
|
|
cs->hw.elsa.base + 16);
|
|
}
|
|
} else if (cs->subtyp==ELSA_PCC16) {
|
|
cs->subtyp = ELSA_PCF;
|
|
printk(KERN_INFO
|
|
"Elsa: %s detected modem at 0x%lx\n",
|
|
Elsa_Types[cs->subtyp],
|
|
cs->hw.elsa.base+8);
|
|
release_region(cs->hw.elsa.base, 8);
|
|
if (!request_region(cs->hw.elsa.base, 16, "elsa isdn modem")) {
|
|
printk(KERN_WARNING
|
|
"HiSax: %s config port %lx-%lx already in use\n",
|
|
Elsa_Types[cs->subtyp],
|
|
cs->hw.elsa.base + 8,
|
|
cs->hw.elsa.base + 16);
|
|
}
|
|
} else
|
|
printk(KERN_INFO
|
|
"Elsa: %s detected modem at 0x%lx\n",
|
|
Elsa_Types[cs->subtyp],
|
|
cs->hw.elsa.base+8);
|
|
arcofi_fsm(cs, ARCOFI_START, &ARCOFI_XOP_0);
|
|
interruptible_sleep_on(&cs->dc.isac.arcofi_wait);
|
|
return(1);
|
|
}
|
|
return(0);
|
|
}
|
|
#endif /* ARCOFI_USE */
|
|
|
|
static void
|
|
elsa_led_handler(struct IsdnCardState *cs)
|
|
{
|
|
int blink = 0;
|
|
|
|
if (cs->subtyp == ELSA_PCMCIA || cs->subtyp == ELSA_PCMCIA_IPAC)
|
|
return;
|
|
del_timer(&cs->hw.elsa.tl);
|
|
if (cs->hw.elsa.status & ELSA_ASSIGN)
|
|
cs->hw.elsa.ctrl_reg |= ELSA_STAT_LED;
|
|
else if (cs->hw.elsa.status & ELSA_BAD_PWR)
|
|
cs->hw.elsa.ctrl_reg &= ~ELSA_STAT_LED;
|
|
else {
|
|
cs->hw.elsa.ctrl_reg ^= ELSA_STAT_LED;
|
|
blink = 250;
|
|
}
|
|
if (cs->hw.elsa.status & 0xf000)
|
|
cs->hw.elsa.ctrl_reg |= ELSA_LINE_LED;
|
|
else if (cs->hw.elsa.status & 0x0f00) {
|
|
cs->hw.elsa.ctrl_reg ^= ELSA_LINE_LED;
|
|
blink = 500;
|
|
} else
|
|
cs->hw.elsa.ctrl_reg &= ~ELSA_LINE_LED;
|
|
|
|
if ((cs->subtyp == ELSA_QS1000PCI) ||
|
|
(cs->subtyp == ELSA_QS3000PCI)) {
|
|
u_char led = 0xff;
|
|
if (cs->hw.elsa.ctrl_reg & ELSA_LINE_LED)
|
|
led ^= ELSA_IPAC_LINE_LED;
|
|
if (cs->hw.elsa.ctrl_reg & ELSA_STAT_LED)
|
|
led ^= ELSA_IPAC_STAT_LED;
|
|
writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_ATX, led);
|
|
} else
|
|
byteout(cs->hw.elsa.ctrl, cs->hw.elsa.ctrl_reg);
|
|
if (blink) {
|
|
init_timer(&cs->hw.elsa.tl);
|
|
cs->hw.elsa.tl.expires = jiffies + ((blink * HZ) / 1000);
|
|
add_timer(&cs->hw.elsa.tl);
|
|
}
|
|
}
|
|
|
|
static int
|
|
Elsa_card_msg(struct IsdnCardState *cs, int mt, void *arg)
|
|
{
|
|
int ret = 0;
|
|
u_long flags;
|
|
|
|
switch (mt) {
|
|
case CARD_RESET:
|
|
spin_lock_irqsave(&cs->lock, flags);
|
|
reset_elsa(cs);
|
|
spin_unlock_irqrestore(&cs->lock, flags);
|
|
return(0);
|
|
case CARD_RELEASE:
|
|
release_io_elsa(cs);
|
|
return(0);
|
|
case CARD_INIT:
|
|
spin_lock_irqsave(&cs->lock, flags);
|
|
cs->debug |= L1_DEB_IPAC;
|
|
reset_elsa(cs);
|
|
inithscxisac(cs, 1);
|
|
if ((cs->subtyp == ELSA_QS1000) ||
|
|
(cs->subtyp == ELSA_QS3000))
|
|
{
|
|
byteout(cs->hw.elsa.timer, 0);
|
|
}
|
|
if (cs->hw.elsa.trig)
|
|
byteout(cs->hw.elsa.trig, 0xff);
|
|
inithscxisac(cs, 2);
|
|
spin_unlock_irqrestore(&cs->lock, flags);
|
|
return(0);
|
|
case CARD_TEST:
|
|
if ((cs->subtyp == ELSA_PCMCIA) ||
|
|
(cs->subtyp == ELSA_PCMCIA_IPAC) ||
|
|
(cs->subtyp == ELSA_QS1000PCI)) {
|
|
return(0);
|
|
} else if (cs->subtyp == ELSA_QS3000PCI) {
|
|
ret = 0;
|
|
} else {
|
|
spin_lock_irqsave(&cs->lock, flags);
|
|
cs->hw.elsa.counter = 0;
|
|
cs->hw.elsa.ctrl_reg |= ELSA_ENA_TIMER_INT;
|
|
cs->hw.elsa.status |= ELIRQF_TIMER_AKTIV;
|
|
byteout(cs->hw.elsa.ctrl, cs->hw.elsa.ctrl_reg);
|
|
byteout(cs->hw.elsa.timer, 0);
|
|
spin_unlock_irqrestore(&cs->lock, flags);
|
|
msleep(110);
|
|
spin_lock_irqsave(&cs->lock, flags);
|
|
cs->hw.elsa.ctrl_reg &= ~ELSA_ENA_TIMER_INT;
|
|
byteout(cs->hw.elsa.ctrl, cs->hw.elsa.ctrl_reg);
|
|
cs->hw.elsa.status &= ~ELIRQF_TIMER_AKTIV;
|
|
spin_unlock_irqrestore(&cs->lock, flags);
|
|
printk(KERN_INFO "Elsa: %d timer tics in 110 msek\n",
|
|
cs->hw.elsa.counter);
|
|
if ((cs->hw.elsa.counter > 10) &&
|
|
(cs->hw.elsa.counter < 16)) {
|
|
printk(KERN_INFO "Elsa: timer and irq OK\n");
|
|
ret = 0;
|
|
} else {
|
|
printk(KERN_WARNING
|
|
"Elsa: timer tic problem (%d/12) maybe an IRQ(%d) conflict\n",
|
|
cs->hw.elsa.counter, cs->irq);
|
|
ret = 1;
|
|
}
|
|
}
|
|
#if ARCOFI_USE
|
|
if (check_arcofi(cs)) {
|
|
init_modem(cs);
|
|
}
|
|
#endif
|
|
elsa_led_handler(cs);
|
|
return(ret);
|
|
case (MDL_REMOVE | REQUEST):
|
|
cs->hw.elsa.status &= 0;
|
|
break;
|
|
case (MDL_ASSIGN | REQUEST):
|
|
cs->hw.elsa.status |= ELSA_ASSIGN;
|
|
break;
|
|
case MDL_INFO_SETUP:
|
|
if ((long) arg)
|
|
cs->hw.elsa.status |= 0x0200;
|
|
else
|
|
cs->hw.elsa.status |= 0x0100;
|
|
break;
|
|
case MDL_INFO_CONN:
|
|
if ((long) arg)
|
|
cs->hw.elsa.status |= 0x2000;
|
|
else
|
|
cs->hw.elsa.status |= 0x1000;
|
|
break;
|
|
case MDL_INFO_REL:
|
|
if ((long) arg) {
|
|
cs->hw.elsa.status &= ~0x2000;
|
|
cs->hw.elsa.status &= ~0x0200;
|
|
} else {
|
|
cs->hw.elsa.status &= ~0x1000;
|
|
cs->hw.elsa.status &= ~0x0100;
|
|
}
|
|
break;
|
|
#if ARCOFI_USE
|
|
case CARD_AUX_IND:
|
|
if (cs->hw.elsa.MFlag) {
|
|
int len;
|
|
u_char *msg;
|
|
|
|
if (!arg)
|
|
return(0);
|
|
msg = arg;
|
|
len = *msg;
|
|
msg++;
|
|
modem_write_cmd(cs, msg, len);
|
|
}
|
|
break;
|
|
#endif
|
|
}
|
|
if (cs->typ == ISDN_CTYPE_ELSA) {
|
|
int pwr = bytein(cs->hw.elsa.ale);
|
|
if (pwr & 0x08)
|
|
cs->hw.elsa.status |= ELSA_BAD_PWR;
|
|
else
|
|
cs->hw.elsa.status &= ~ELSA_BAD_PWR;
|
|
}
|
|
elsa_led_handler(cs);
|
|
return(ret);
|
|
}
|
|
|
|
static unsigned char
|
|
probe_elsa_adr(unsigned int adr, int typ)
|
|
{
|
|
int i, in1, in2, p16_1 = 0, p16_2 = 0, p8_1 = 0, p8_2 = 0, pc_1 = 0,
|
|
pc_2 = 0, pfp_1 = 0, pfp_2 = 0;
|
|
|
|
/* In case of the elsa pcmcia card, this region is in use,
|
|
reserved for us by the card manager. So we do not check it
|
|
here, it would fail. */
|
|
if (typ != ISDN_CTYPE_ELSA_PCMCIA) {
|
|
if (request_region(adr, 8, "elsa card")) {
|
|
release_region(adr, 8);
|
|
} else {
|
|
printk(KERN_WARNING
|
|
"Elsa: Probing Port 0x%x: already in use\n", adr);
|
|
return (0);
|
|
}
|
|
}
|
|
for (i = 0; i < 16; i++) {
|
|
in1 = inb(adr + ELSA_CONFIG); /* 'toggelt' bei */
|
|
in2 = inb(adr + ELSA_CONFIG); /* jedem Zugriff */
|
|
p16_1 += 0x04 & in1;
|
|
p16_2 += 0x04 & in2;
|
|
p8_1 += 0x02 & in1;
|
|
p8_2 += 0x02 & in2;
|
|
pc_1 += 0x01 & in1;
|
|
pc_2 += 0x01 & in2;
|
|
pfp_1 += 0x40 & in1;
|
|
pfp_2 += 0x40 & in2;
|
|
}
|
|
printk(KERN_INFO "Elsa: Probing IO 0x%x", adr);
|
|
if (65 == ++p16_1 * ++p16_2) {
|
|
printk(" PCC-16/PCF found\n");
|
|
return (ELSA_PCC16);
|
|
} else if (1025 == ++pfp_1 * ++pfp_2) {
|
|
printk(" PCF-Pro found\n");
|
|
return (ELSA_PCFPRO);
|
|
} else if (33 == ++p8_1 * ++p8_2) {
|
|
printk(" PCC8 found\n");
|
|
return (ELSA_PCC8);
|
|
} else if (17 == ++pc_1 * ++pc_2) {
|
|
printk(" PC found\n");
|
|
return (ELSA_PC);
|
|
} else {
|
|
printk(" failed\n");
|
|
return (0);
|
|
}
|
|
}
|
|
|
|
static unsigned int
|
|
probe_elsa(struct IsdnCardState *cs)
|
|
{
|
|
int i;
|
|
unsigned int CARD_portlist[] =
|
|
{0x160, 0x170, 0x260, 0x360, 0};
|
|
|
|
for (i = 0; CARD_portlist[i]; i++) {
|
|
if ((cs->subtyp = probe_elsa_adr(CARD_portlist[i], cs->typ)))
|
|
break;
|
|
}
|
|
return (CARD_portlist[i]);
|
|
}
|
|
|
|
static int __devinit
|
|
setup_elsa_isa(struct IsdnCard *card)
|
|
{
|
|
struct IsdnCardState *cs = card->cs;
|
|
u_char val;
|
|
|
|
cs->hw.elsa.base = card->para[0];
|
|
printk(KERN_INFO "Elsa: Microlink IO probing\n");
|
|
if (cs->hw.elsa.base) {
|
|
if (!(cs->subtyp = probe_elsa_adr(cs->hw.elsa.base,
|
|
cs->typ))) {
|
|
printk(KERN_WARNING
|
|
"Elsa: no Elsa Microlink at %#lx\n",
|
|
cs->hw.elsa.base);
|
|
return (0);
|
|
}
|
|
} else
|
|
cs->hw.elsa.base = probe_elsa(cs);
|
|
|
|
if (!cs->hw.elsa.base) {
|
|
printk(KERN_WARNING
|
|
"No Elsa Microlink found\n");
|
|
return (0);
|
|
}
|
|
|
|
cs->hw.elsa.cfg = cs->hw.elsa.base + ELSA_CONFIG;
|
|
cs->hw.elsa.ctrl = cs->hw.elsa.base + ELSA_CONTROL;
|
|
cs->hw.elsa.ale = cs->hw.elsa.base + ELSA_ALE;
|
|
cs->hw.elsa.isac = cs->hw.elsa.base + ELSA_ISAC;
|
|
cs->hw.elsa.itac = cs->hw.elsa.base + ELSA_ITAC;
|
|
cs->hw.elsa.hscx = cs->hw.elsa.base + ELSA_HSCX;
|
|
cs->hw.elsa.trig = cs->hw.elsa.base + ELSA_TRIG_IRQ;
|
|
cs->hw.elsa.timer = cs->hw.elsa.base + ELSA_START_TIMER;
|
|
val = bytein(cs->hw.elsa.cfg);
|
|
if (cs->subtyp == ELSA_PC) {
|
|
const u_char CARD_IrqTab[8] =
|
|
{7, 3, 5, 9, 0, 0, 0, 0};
|
|
cs->irq = CARD_IrqTab[(val & ELSA_IRQ_IDX_PC) >> 2];
|
|
} else if (cs->subtyp == ELSA_PCC8) {
|
|
const u_char CARD_IrqTab[8] =
|
|
{7, 3, 5, 9, 0, 0, 0, 0};
|
|
cs->irq = CARD_IrqTab[(val & ELSA_IRQ_IDX_PCC8) >> 4];
|
|
} else {
|
|
const u_char CARD_IrqTab[8] =
|
|
{15, 10, 15, 3, 11, 5, 11, 9};
|
|
cs->irq = CARD_IrqTab[(val & ELSA_IRQ_IDX) >> 3];
|
|
}
|
|
val = bytein(cs->hw.elsa.ale) & ELSA_HW_RELEASE;
|
|
if (val < 3)
|
|
val |= 8;
|
|
val += 'A' - 3;
|
|
if (val == 'B' || val == 'C')
|
|
val ^= 1;
|
|
if ((cs->subtyp == ELSA_PCFPRO) && (val == 'G'))
|
|
val = 'C';
|
|
printk(KERN_INFO
|
|
"Elsa: %s found at %#lx Rev.:%c IRQ %d\n",
|
|
Elsa_Types[cs->subtyp],
|
|
cs->hw.elsa.base,
|
|
val, cs->irq);
|
|
val = bytein(cs->hw.elsa.ale) & ELSA_S0_POWER_BAD;
|
|
if (val) {
|
|
printk(KERN_WARNING
|
|
"Elsa: Microlink S0 bus power bad\n");
|
|
cs->hw.elsa.status |= ELSA_BAD_PWR;
|
|
}
|
|
|
|
return (1);
|
|
}
|
|
|
|
#ifdef __ISAPNP__
|
|
static struct isapnp_device_id elsa_ids[] __devinitdata = {
|
|
{ ISAPNP_VENDOR('E', 'L', 'S'), ISAPNP_FUNCTION(0x0133),
|
|
ISAPNP_VENDOR('E', 'L', 'S'), ISAPNP_FUNCTION(0x0133),
|
|
(unsigned long) "Elsa QS1000" },
|
|
{ ISAPNP_VENDOR('E', 'L', 'S'), ISAPNP_FUNCTION(0x0134),
|
|
ISAPNP_VENDOR('E', 'L', 'S'), ISAPNP_FUNCTION(0x0134),
|
|
(unsigned long) "Elsa QS3000" },
|
|
{ 0, }
|
|
};
|
|
|
|
static struct isapnp_device_id *ipid __devinitdata = &elsa_ids[0];
|
|
static struct pnp_card *pnp_c __devinitdata = NULL;
|
|
#endif /* __ISAPNP__ */
|
|
|
|
static int __devinit
|
|
setup_elsa_isapnp(struct IsdnCard *card)
|
|
{
|
|
struct IsdnCardState *cs = card->cs;
|
|
|
|
#ifdef __ISAPNP__
|
|
if (!card->para[1] && isapnp_present()) {
|
|
struct pnp_dev *pnp_d;
|
|
while(ipid->card_vendor) {
|
|
if ((pnp_c = pnp_find_card(ipid->card_vendor,
|
|
ipid->card_device, pnp_c))) {
|
|
pnp_d = NULL;
|
|
if ((pnp_d = pnp_find_dev(pnp_c,
|
|
ipid->vendor, ipid->function, pnp_d))) {
|
|
int err;
|
|
|
|
printk(KERN_INFO "HiSax: %s detected\n",
|
|
(char *)ipid->driver_data);
|
|
pnp_disable_dev(pnp_d);
|
|
err = pnp_activate_dev(pnp_d);
|
|
if (err<0) {
|
|
printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
|
|
__func__, err);
|
|
return(0);
|
|
}
|
|
card->para[1] = pnp_port_start(pnp_d, 0);
|
|
card->para[0] = pnp_irq(pnp_d, 0);
|
|
|
|
if (!card->para[0] || !card->para[1]) {
|
|
printk(KERN_ERR "Elsa PnP:some resources are missing %ld/%lx\n",
|
|
card->para[0], card->para[1]);
|
|
pnp_disable_dev(pnp_d);
|
|
return(0);
|
|
}
|
|
if (ipid->function == ISAPNP_FUNCTION(0x133))
|
|
cs->subtyp = ELSA_QS1000;
|
|
else
|
|
cs->subtyp = ELSA_QS3000;
|
|
break;
|
|
} else {
|
|
printk(KERN_ERR "Elsa PnP: PnP error card found, no device\n");
|
|
return(0);
|
|
}
|
|
}
|
|
ipid++;
|
|
pnp_c=NULL;
|
|
}
|
|
if (!ipid->card_vendor) {
|
|
printk(KERN_INFO "Elsa PnP: no ISAPnP card found\n");
|
|
return(0);
|
|
}
|
|
}
|
|
#endif /* __ISAPNP__ */
|
|
|
|
if (card->para[1] && card->para[0]) {
|
|
cs->hw.elsa.base = card->para[1];
|
|
cs->irq = card->para[0];
|
|
if (!cs->subtyp)
|
|
cs->subtyp = ELSA_QS1000;
|
|
} else {
|
|
printk(KERN_ERR "Elsa PnP: no parameter\n");
|
|
}
|
|
cs->hw.elsa.cfg = cs->hw.elsa.base + ELSA_CONFIG;
|
|
cs->hw.elsa.ale = cs->hw.elsa.base + ELSA_ALE;
|
|
cs->hw.elsa.isac = cs->hw.elsa.base + ELSA_ISAC;
|
|
cs->hw.elsa.hscx = cs->hw.elsa.base + ELSA_HSCX;
|
|
cs->hw.elsa.trig = cs->hw.elsa.base + ELSA_TRIG_IRQ;
|
|
cs->hw.elsa.timer = cs->hw.elsa.base + ELSA_START_TIMER;
|
|
cs->hw.elsa.ctrl = cs->hw.elsa.base + ELSA_CONTROL;
|
|
printk(KERN_INFO
|
|
"Elsa: %s defined at %#lx IRQ %d\n",
|
|
Elsa_Types[cs->subtyp],
|
|
cs->hw.elsa.base,
|
|
cs->irq);
|
|
|
|
return (1);
|
|
}
|
|
|
|
static void __devinit
|
|
setup_elsa_pcmcia(struct IsdnCard *card)
|
|
{
|
|
struct IsdnCardState *cs = card->cs;
|
|
u_char val;
|
|
|
|
cs->hw.elsa.base = card->para[1];
|
|
cs->irq = card->para[0];
|
|
val = readreg(cs->hw.elsa.base + 0, cs->hw.elsa.base + 2, IPAC_ID);
|
|
if ((val == 1) || (val == 2)) { /* IPAC version 1.1/1.2 */
|
|
cs->subtyp = ELSA_PCMCIA_IPAC;
|
|
cs->hw.elsa.ale = cs->hw.elsa.base + 0;
|
|
cs->hw.elsa.isac = cs->hw.elsa.base + 2;
|
|
cs->hw.elsa.hscx = cs->hw.elsa.base + 2;
|
|
test_and_set_bit(HW_IPAC, &cs->HW_Flags);
|
|
} else {
|
|
cs->subtyp = ELSA_PCMCIA;
|
|
cs->hw.elsa.ale = cs->hw.elsa.base + ELSA_ALE_PCM;
|
|
cs->hw.elsa.isac = cs->hw.elsa.base + ELSA_ISAC_PCM;
|
|
cs->hw.elsa.hscx = cs->hw.elsa.base + ELSA_HSCX;
|
|
}
|
|
cs->hw.elsa.timer = 0;
|
|
cs->hw.elsa.trig = 0;
|
|
cs->hw.elsa.ctrl = 0;
|
|
cs->irq_flags |= IRQF_SHARED;
|
|
printk(KERN_INFO
|
|
"Elsa: %s defined at %#lx IRQ %d\n",
|
|
Elsa_Types[cs->subtyp],
|
|
cs->hw.elsa.base,
|
|
cs->irq);
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
static struct pci_dev *dev_qs1000 __devinitdata = NULL;
|
|
static struct pci_dev *dev_qs3000 __devinitdata = NULL;
|
|
|
|
static int __devinit
|
|
setup_elsa_pci(struct IsdnCard *card)
|
|
{
|
|
struct IsdnCardState *cs = card->cs;
|
|
|
|
cs->subtyp = 0;
|
|
if ((dev_qs1000 = hisax_find_pci_device(PCI_VENDOR_ID_ELSA,
|
|
PCI_DEVICE_ID_ELSA_MICROLINK, dev_qs1000))) {
|
|
if (pci_enable_device(dev_qs1000))
|
|
return(0);
|
|
cs->subtyp = ELSA_QS1000PCI;
|
|
cs->irq = dev_qs1000->irq;
|
|
cs->hw.elsa.cfg = pci_resource_start(dev_qs1000, 1);
|
|
cs->hw.elsa.base = pci_resource_start(dev_qs1000, 3);
|
|
} else if ((dev_qs3000 = hisax_find_pci_device(PCI_VENDOR_ID_ELSA,
|
|
PCI_DEVICE_ID_ELSA_QS3000, dev_qs3000))) {
|
|
if (pci_enable_device(dev_qs3000))
|
|
return(0);
|
|
cs->subtyp = ELSA_QS3000PCI;
|
|
cs->irq = dev_qs3000->irq;
|
|
cs->hw.elsa.cfg = pci_resource_start(dev_qs3000, 1);
|
|
cs->hw.elsa.base = pci_resource_start(dev_qs3000, 3);
|
|
} else {
|
|
printk(KERN_WARNING "Elsa: No PCI card found\n");
|
|
return(0);
|
|
}
|
|
if (!cs->irq) {
|
|
printk(KERN_WARNING "Elsa: No IRQ for PCI card found\n");
|
|
return(0);
|
|
}
|
|
|
|
if (!(cs->hw.elsa.base && cs->hw.elsa.cfg)) {
|
|
printk(KERN_WARNING "Elsa: No IO-Adr for PCI card found\n");
|
|
return(0);
|
|
}
|
|
if ((cs->hw.elsa.cfg & 0xff) || (cs->hw.elsa.base & 0xf)) {
|
|
printk(KERN_WARNING "Elsa: You may have a wrong PCI bios\n");
|
|
printk(KERN_WARNING "Elsa: If your system hangs now, read\n");
|
|
printk(KERN_WARNING "Elsa: Documentation/isdn/README.HiSax\n");
|
|
}
|
|
cs->hw.elsa.ale = cs->hw.elsa.base;
|
|
cs->hw.elsa.isac = cs->hw.elsa.base +1;
|
|
cs->hw.elsa.hscx = cs->hw.elsa.base +1;
|
|
test_and_set_bit(HW_IPAC, &cs->HW_Flags);
|
|
cs->hw.elsa.timer = 0;
|
|
cs->hw.elsa.trig = 0;
|
|
cs->irq_flags |= IRQF_SHARED;
|
|
printk(KERN_INFO
|
|
"Elsa: %s defined at %#lx/0x%x IRQ %d\n",
|
|
Elsa_Types[cs->subtyp],
|
|
cs->hw.elsa.base,
|
|
cs->hw.elsa.cfg,
|
|
cs->irq);
|
|
|
|
return (1);
|
|
}
|
|
|
|
#else
|
|
|
|
static int __devinit
|
|
setup_elsa_pci(struct IsdnCard *card)
|
|
{
|
|
return (1);
|
|
}
|
|
#endif /* CONFIG_PCI */
|
|
|
|
static int __devinit
|
|
setup_elsa_common(struct IsdnCard *card)
|
|
{
|
|
struct IsdnCardState *cs = card->cs;
|
|
u_char val;
|
|
int bytecnt;
|
|
|
|
switch (cs->subtyp) {
|
|
case ELSA_PC:
|
|
case ELSA_PCC8:
|
|
case ELSA_PCC16:
|
|
case ELSA_QS1000:
|
|
case ELSA_PCMCIA:
|
|
case ELSA_PCMCIA_IPAC:
|
|
bytecnt = 8;
|
|
break;
|
|
case ELSA_PCFPRO:
|
|
case ELSA_PCF:
|
|
case ELSA_QS3000:
|
|
case ELSA_QS3000PCI:
|
|
bytecnt = 16;
|
|
break;
|
|
case ELSA_QS1000PCI:
|
|
bytecnt = 2;
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING
|
|
"Unknown ELSA subtype %d\n", cs->subtyp);
|
|
return (0);
|
|
}
|
|
/* In case of the elsa pcmcia card, this region is in use,
|
|
reserved for us by the card manager. So we do not check it
|
|
here, it would fail. */
|
|
if (cs->typ != ISDN_CTYPE_ELSA_PCMCIA && !request_region(cs->hw.elsa.base, bytecnt, "elsa isdn")) {
|
|
printk(KERN_WARNING
|
|
"HiSax: ELSA config port %#lx-%#lx already in use\n",
|
|
cs->hw.elsa.base,
|
|
cs->hw.elsa.base + bytecnt);
|
|
return (0);
|
|
}
|
|
if ((cs->subtyp == ELSA_QS1000PCI) || (cs->subtyp == ELSA_QS3000PCI)) {
|
|
if (!request_region(cs->hw.elsa.cfg, 0x80, "elsa isdn pci")) {
|
|
printk(KERN_WARNING
|
|
"HiSax: ELSA pci port %x-%x already in use\n",
|
|
cs->hw.elsa.cfg,
|
|
cs->hw.elsa.cfg + 0x80);
|
|
release_region(cs->hw.elsa.base, bytecnt);
|
|
return (0);
|
|
}
|
|
}
|
|
#if ARCOFI_USE
|
|
init_arcofi(cs);
|
|
#endif
|
|
setup_isac(cs);
|
|
cs->hw.elsa.tl.function = (void *) elsa_led_handler;
|
|
cs->hw.elsa.tl.data = (long) cs;
|
|
init_timer(&cs->hw.elsa.tl);
|
|
/* Teste Timer */
|
|
if (cs->hw.elsa.timer) {
|
|
byteout(cs->hw.elsa.trig, 0xff);
|
|
byteout(cs->hw.elsa.timer, 0);
|
|
if (!TimerRun(cs)) {
|
|
byteout(cs->hw.elsa.timer, 0); /* 2. Versuch */
|
|
if (!TimerRun(cs)) {
|
|
printk(KERN_WARNING
|
|
"Elsa: timer do not start\n");
|
|
release_io_elsa(cs);
|
|
return (0);
|
|
}
|
|
}
|
|
HZDELAY((HZ/100) + 1); /* wait >=10 ms */
|
|
if (TimerRun(cs)) {
|
|
printk(KERN_WARNING "Elsa: timer do not run down\n");
|
|
release_io_elsa(cs);
|
|
return (0);
|
|
}
|
|
printk(KERN_INFO "Elsa: timer OK; resetting card\n");
|
|
}
|
|
cs->BC_Read_Reg = &ReadHSCX;
|
|
cs->BC_Write_Reg = &WriteHSCX;
|
|
cs->BC_Send_Data = &hscx_fill_fifo;
|
|
cs->cardmsg = &Elsa_card_msg;
|
|
if ((cs->subtyp == ELSA_QS1000PCI) || (cs->subtyp == ELSA_QS3000PCI) || (cs->subtyp == ELSA_PCMCIA_IPAC)) {
|
|
cs->readisac = &ReadISAC_IPAC;
|
|
cs->writeisac = &WriteISAC_IPAC;
|
|
cs->readisacfifo = &ReadISACfifo_IPAC;
|
|
cs->writeisacfifo = &WriteISACfifo_IPAC;
|
|
cs->irq_func = &elsa_interrupt_ipac;
|
|
val = readreg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_ID);
|
|
printk(KERN_INFO "Elsa: IPAC version %x\n", val);
|
|
} else {
|
|
cs->readisac = &ReadISAC;
|
|
cs->writeisac = &WriteISAC;
|
|
cs->readisacfifo = &ReadISACfifo;
|
|
cs->writeisacfifo = &WriteISACfifo;
|
|
cs->irq_func = &elsa_interrupt;
|
|
ISACVersion(cs, "Elsa:");
|
|
if (HscxVersion(cs, "Elsa:")) {
|
|
printk(KERN_WARNING
|
|
"Elsa: wrong HSCX versions check IO address\n");
|
|
release_io_elsa(cs);
|
|
return (0);
|
|
}
|
|
}
|
|
if (cs->subtyp == ELSA_PC) {
|
|
val = readitac(cs, ITAC_SYS);
|
|
printk(KERN_INFO "Elsa: ITAC version %s\n", ITACVer[val & 7]);
|
|
writeitac(cs, ITAC_ISEN, 0);
|
|
writeitac(cs, ITAC_RFIE, 0);
|
|
writeitac(cs, ITAC_XFIE, 0);
|
|
writeitac(cs, ITAC_SCIE, 0);
|
|
writeitac(cs, ITAC_STIE, 0);
|
|
}
|
|
return (1);
|
|
}
|
|
|
|
int __devinit
|
|
setup_elsa(struct IsdnCard *card)
|
|
{
|
|
int rc;
|
|
struct IsdnCardState *cs = card->cs;
|
|
char tmp[64];
|
|
|
|
strcpy(tmp, Elsa_revision);
|
|
printk(KERN_INFO "HiSax: Elsa driver Rev. %s\n", HiSax_getrev(tmp));
|
|
cs->hw.elsa.ctrl_reg = 0;
|
|
cs->hw.elsa.status = 0;
|
|
cs->hw.elsa.MFlag = 0;
|
|
cs->subtyp = 0;
|
|
|
|
if (cs->typ == ISDN_CTYPE_ELSA) {
|
|
rc = setup_elsa_isa(card);
|
|
if (!rc)
|
|
return (0);
|
|
|
|
} else if (cs->typ == ISDN_CTYPE_ELSA_PNP) {
|
|
rc = setup_elsa_isapnp(card);
|
|
if (!rc)
|
|
return (0);
|
|
|
|
} else if (cs->typ == ISDN_CTYPE_ELSA_PCMCIA)
|
|
setup_elsa_pcmcia(card);
|
|
|
|
else if (cs->typ == ISDN_CTYPE_ELSA_PCI) {
|
|
rc = setup_elsa_pci(card);
|
|
if (!rc)
|
|
return (0);
|
|
|
|
} else
|
|
return (0);
|
|
|
|
return setup_elsa_common(card);
|
|
}
|