mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 10:36:55 +07:00
9e53481eea
This patch enables the PIIX4 to respond to special cycles on the PCI bus. One such special cycle must be used in order to enter a suspend state, and if response to it is not enabled then the suspend state will never be entered. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6904/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
159 lines
4.6 KiB
C
159 lines
4.6 KiB
C
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <asm/mips-boards/piix4.h>
|
|
|
|
/* PCI interrupt pins */
|
|
#define PCIA 1
|
|
#define PCIB 2
|
|
#define PCIC 3
|
|
#define PCID 4
|
|
|
|
/* This table is filled in by interrogating the PIIX4 chip */
|
|
static char pci_irq[5] = {
|
|
};
|
|
|
|
static char irq_tab[][5] __initdata = {
|
|
/* INTA INTB INTC INTD */
|
|
{0, 0, 0, 0, 0 }, /* 0: GT64120 PCI bridge */
|
|
{0, 0, 0, 0, 0 }, /* 1: Unused */
|
|
{0, 0, 0, 0, 0 }, /* 2: Unused */
|
|
{0, 0, 0, 0, 0 }, /* 3: Unused */
|
|
{0, 0, 0, 0, 0 }, /* 4: Unused */
|
|
{0, 0, 0, 0, 0 }, /* 5: Unused */
|
|
{0, 0, 0, 0, 0 }, /* 6: Unused */
|
|
{0, 0, 0, 0, 0 }, /* 7: Unused */
|
|
{0, 0, 0, 0, 0 }, /* 8: Unused */
|
|
{0, 0, 0, 0, 0 }, /* 9: Unused */
|
|
{0, 0, 0, 0, PCID }, /* 10: PIIX4 USB */
|
|
{0, PCIB, 0, 0, 0 }, /* 11: AMD 79C973 Ethernet */
|
|
{0, PCIC, 0, 0, 0 }, /* 12: Crystal 4281 Sound */
|
|
{0, 0, 0, 0, 0 }, /* 13: Unused */
|
|
{0, 0, 0, 0, 0 }, /* 14: Unused */
|
|
{0, 0, 0, 0, 0 }, /* 15: Unused */
|
|
{0, 0, 0, 0, 0 }, /* 16: Unused */
|
|
{0, 0, 0, 0, 0 }, /* 17: Bonito/SOC-it PCI Bridge*/
|
|
{0, PCIA, PCIB, PCIC, PCID }, /* 18: PCI Slot 1 */
|
|
{0, PCIB, PCIC, PCID, PCIA }, /* 19: PCI Slot 2 */
|
|
{0, PCIC, PCID, PCIA, PCIB }, /* 20: PCI Slot 3 */
|
|
{0, PCID, PCIA, PCIB, PCIC } /* 21: PCI Slot 4 */
|
|
};
|
|
|
|
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
int virq;
|
|
virq = irq_tab[slot][pin];
|
|
return pci_irq[virq];
|
|
}
|
|
|
|
/* Do platform specific device initialization at pci_enable_device() time */
|
|
int pcibios_plat_dev_init(struct pci_dev *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void malta_piix_func3_base_fixup(struct pci_dev *dev)
|
|
{
|
|
/* Set a sane PM I/O base address */
|
|
pci_write_config_word(dev, PIIX4_FUNC3_PMBA, 0x1000);
|
|
|
|
/* Enable access to the PM I/O region */
|
|
pci_write_config_byte(dev, PIIX4_FUNC3_PMREGMISC,
|
|
PIIX4_FUNC3_PMREGMISC_EN);
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3,
|
|
malta_piix_func3_base_fixup);
|
|
|
|
static void malta_piix_func0_fixup(struct pci_dev *pdev)
|
|
{
|
|
unsigned char reg_val;
|
|
u32 reg_val32;
|
|
u16 reg_val16;
|
|
/* PIIX PIRQC[A:D] irq mappings */
|
|
static int piixirqmap[PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MAX] = {
|
|
0, 0, 0, 3,
|
|
4, 5, 6, 7,
|
|
0, 9, 10, 11,
|
|
12, 0, 14, 15
|
|
};
|
|
int i;
|
|
|
|
/* Interrogate PIIX4 to get PCI IRQ mapping */
|
|
for (i = 0; i <= 3; i++) {
|
|
pci_read_config_byte(pdev, PIIX4_FUNC0_PIRQRC+i, ®_val);
|
|
if (reg_val & PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_DISABLE)
|
|
pci_irq[PCIA+i] = 0; /* Disabled */
|
|
else
|
|
pci_irq[PCIA+i] = piixirqmap[reg_val &
|
|
PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MASK];
|
|
}
|
|
|
|
/* Done by YAMON 2.00 onwards */
|
|
if (PCI_SLOT(pdev->devfn) == 10) {
|
|
/*
|
|
* Set top of main memory accessible by ISA or DMA
|
|
* devices to 16 Mb.
|
|
*/
|
|
pci_read_config_byte(pdev, PIIX4_FUNC0_TOM, ®_val);
|
|
pci_write_config_byte(pdev, PIIX4_FUNC0_TOM, reg_val |
|
|
PIIX4_FUNC0_TOM_TOP_OF_MEMORY_MASK);
|
|
}
|
|
|
|
/* Mux SERIRQ to its pin */
|
|
pci_read_config_dword(pdev, PIIX4_FUNC0_GENCFG, ®_val32);
|
|
pci_write_config_dword(pdev, PIIX4_FUNC0_GENCFG,
|
|
reg_val32 | PIIX4_FUNC0_GENCFG_SERIRQ);
|
|
|
|
/* Enable SERIRQ */
|
|
pci_read_config_byte(pdev, PIIX4_FUNC0_SERIRQC, ®_val);
|
|
reg_val |= PIIX4_FUNC0_SERIRQC_EN | PIIX4_FUNC0_SERIRQC_CONT;
|
|
pci_write_config_byte(pdev, PIIX4_FUNC0_SERIRQC, reg_val);
|
|
|
|
/* Enable response to special cycles */
|
|
pci_read_config_word(pdev, PCI_COMMAND, ®_val16);
|
|
pci_write_config_word(pdev, PCI_COMMAND,
|
|
reg_val16 | PCI_COMMAND_SPECIAL);
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0,
|
|
malta_piix_func0_fixup);
|
|
|
|
static void malta_piix_func1_fixup(struct pci_dev *pdev)
|
|
{
|
|
unsigned char reg_val;
|
|
|
|
/* Done by YAMON 2.02 onwards */
|
|
if (PCI_SLOT(pdev->devfn) == 10) {
|
|
/*
|
|
* IDE Decode enable.
|
|
*/
|
|
pci_read_config_byte(pdev, PIIX4_FUNC1_IDETIM_PRIMARY_HI,
|
|
®_val);
|
|
pci_write_config_byte(pdev, PIIX4_FUNC1_IDETIM_PRIMARY_HI,
|
|
reg_val|PIIX4_FUNC1_IDETIM_PRIMARY_HI_IDE_DECODE_EN);
|
|
pci_read_config_byte(pdev, PIIX4_FUNC1_IDETIM_SECONDARY_HI,
|
|
®_val);
|
|
pci_write_config_byte(pdev, PIIX4_FUNC1_IDETIM_SECONDARY_HI,
|
|
reg_val|PIIX4_FUNC1_IDETIM_SECONDARY_HI_IDE_DECODE_EN);
|
|
}
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB,
|
|
malta_piix_func1_fixup);
|
|
|
|
/* Enable PCI 2.1 compatibility in PIIX4 */
|
|
static void quirk_dlcsetup(struct pci_dev *dev)
|
|
{
|
|
u8 odlc, ndlc;
|
|
|
|
(void) pci_read_config_byte(dev, PIIX4_FUNC0_DLC, &odlc);
|
|
/* Enable passive releases and delayed transaction */
|
|
ndlc = odlc | PIIX4_FUNC0_DLC_USBPR_EN |
|
|
PIIX4_FUNC0_DLC_PASSIVE_RELEASE_EN |
|
|
PIIX4_FUNC0_DLC_DELAYED_TRANSACTION_EN;
|
|
(void) pci_write_config_byte(dev, PIIX4_FUNC0_DLC, ndlc);
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0,
|
|
quirk_dlcsetup);
|