mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2025-04-07 10:57:58 +07:00
f18f42d749
The power up defaults of the MPLL are designed for the standard 125MHz refclock derived from the ENET PLL. As this clock has a jitter that violates the PCIe Gen2 timing requirements, some board designs use an external reference clock generator. Those clock generators may output a clock at a different rate than what the MPLL expects (usually a 100MHz clock, to re-use the PCIe bus clock). In that case the MPLL must be reconfigured via overrides to use different refclock dividers and loop multipliers. The i.MX6 reference manual lists both 100MHz and 200MHz as supported refclock rates and the associated mult and div values. Only the 100MHz setup has been tested on a real board, but since the 200MHz setup only differs in the used pre-divider it seems safe to add it now. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com> |
||
|---|---|---|
| .. | ||
| Kconfig | ||
| Makefile | ||
| pci-dra7xx.c | ||
| pci-exynos.c | ||
| pci-imx6.c | ||
| pci-keystone-dw.c | ||
| pci-keystone.c | ||
| pci-keystone.h | ||
| pci-layerscape.c | ||
| pcie-armada8k.c | ||
| pcie-artpec6.c | ||
| pcie-designware-ep.c | ||
| pcie-designware-host.c | ||
| pcie-designware-plat.c | ||
| pcie-designware.c | ||
| pcie-designware.h | ||
| pcie-hisi.c | ||
| pcie-histb.c | ||
| pcie-kirin.c | ||
| pcie-qcom.c | ||
| pcie-spear13xx.c | ||