mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-27 04:41:01 +07:00
9796853e90
This patch fixes two problems: - 1) The device tree isn't currently providing sti-ethclk which is required by the dwmac glue code to correctly configure the ethernet PHY clock speed. This means depending on what the bootloader/jtag has configured this clock to, and what switch/hub the board is plugged into you most likely will NOT successfully negotiate a ethernet link. 2) The stmmaceth clock was associated with the wrong clock. It was referencing the PHY clock rather than the interconnect clock which clocks the IP. This patch also brings us closer to not having to boot the upstream kernel with the clk_ignore_unused parameter. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
241 lines
6.2 KiB
Plaintext
241 lines
6.2 KiB
Plaintext
/*
|
|
* Copyright (C) 2012 STMicroelectronics Limited.
|
|
* Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* publishhed by the Free Software Foundation.
|
|
*/
|
|
#include "stih41x.dtsi"
|
|
#include "stih416-clock.dtsi"
|
|
#include "stih416-pinctrl.dtsi"
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/reset-controller/stih416-resets.h>
|
|
/ {
|
|
L2: cache-controller {
|
|
compatible = "arm,pl310-cache";
|
|
reg = <0xfffe2000 0x1000>;
|
|
arm,data-latency = <3 3 3>;
|
|
arm,tag-latency = <2 2 2>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-parent = <&intc>;
|
|
ranges;
|
|
compatible = "simple-bus";
|
|
|
|
powerdown: powerdown-controller {
|
|
#reset-cells = <1>;
|
|
compatible = "st,stih416-powerdown";
|
|
};
|
|
|
|
softreset: softreset-controller {
|
|
#reset-cells = <1>;
|
|
compatible = "st,stih416-softreset";
|
|
};
|
|
|
|
syscfg_sbc:sbc-syscfg@fe600000{
|
|
compatible = "st,stih416-sbc-syscfg", "syscon";
|
|
reg = <0xfe600000 0x1000>;
|
|
};
|
|
|
|
syscfg_front:front-syscfg@fee10000{
|
|
compatible = "st,stih416-front-syscfg", "syscon";
|
|
reg = <0xfee10000 0x1000>;
|
|
};
|
|
|
|
syscfg_rear:rear-syscfg@fe830000{
|
|
compatible = "st,stih416-rear-syscfg", "syscon";
|
|
reg = <0xfe830000 0x1000>;
|
|
};
|
|
|
|
/* MPE */
|
|
syscfg_fvdp_fe:fvdp-fe-syscfg@fddf0000{
|
|
compatible = "st,stih416-fvdp-fe-syscfg", "syscon";
|
|
reg = <0xfddf0000 0x1000>;
|
|
};
|
|
|
|
syscfg_fvdp_lite:fvdp-lite-syscfg@fd6a0000{
|
|
compatible = "st,stih416-fvdp-lite-syscfg", "syscon";
|
|
reg = <0xfd6a0000 0x1000>;
|
|
};
|
|
|
|
syscfg_cpu:cpu-syscfg@fdde0000{
|
|
compatible = "st,stih416-cpu-syscfg", "syscon";
|
|
reg = <0xfdde0000 0x1000>;
|
|
};
|
|
|
|
syscfg_compo:compo-syscfg@fd320000{
|
|
compatible = "st,stih416-compo-syscfg", "syscon";
|
|
reg = <0xfd320000 0x1000>;
|
|
};
|
|
|
|
syscfg_transport:transport-syscfg@fd690000{
|
|
compatible = "st,stih416-transport-syscfg", "syscon";
|
|
reg = <0xfd690000 0x1000>;
|
|
};
|
|
|
|
syscfg_lpm:lpm-syscfg@fe4b5100{
|
|
compatible = "st,stih416-lpm-syscfg", "syscon";
|
|
reg = <0xfe4b5100 0x8>;
|
|
};
|
|
|
|
serial2: serial@fed32000{
|
|
compatible = "st,asc";
|
|
status = "disabled";
|
|
reg = <0xfed32000 0x2c>;
|
|
interrupts = <0 197 0>;
|
|
clocks = <&clk_s_a0_ls CLK_ICN_REG>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_serial2 &pinctrl_serial2_oe>;
|
|
};
|
|
|
|
/* SBC_UART1 */
|
|
sbc_serial1: serial@fe531000 {
|
|
compatible = "st,asc";
|
|
status = "disabled";
|
|
reg = <0xfe531000 0x2c>;
|
|
interrupts = <0 210 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sbc_serial1>;
|
|
clocks = <&clk_sysin>;
|
|
};
|
|
|
|
i2c@fed40000 {
|
|
compatible = "st,comms-ssc4-i2c";
|
|
reg = <0xfed40000 0x110>;
|
|
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_a0_ls CLK_ICN_REG>;
|
|
clock-names = "ssc";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c0_default>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@fed41000 {
|
|
compatible = "st,comms-ssc4-i2c";
|
|
reg = <0xfed41000 0x110>;
|
|
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_a0_ls CLK_ICN_REG>;
|
|
clock-names = "ssc";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1_default>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@fe540000 {
|
|
compatible = "st,comms-ssc4-i2c";
|
|
reg = <0xfe540000 0x110>;
|
|
interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_sysin>;
|
|
clock-names = "ssc";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sbc_i2c0_default>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@fe541000 {
|
|
compatible = "st,comms-ssc4-i2c";
|
|
reg = <0xfe541000 0x110>;
|
|
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_sysin>;
|
|
clock-names = "ssc";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sbc_i2c1_default>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ethernet0: dwmac@fe810000 {
|
|
device_type = "network";
|
|
compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
|
|
status = "disabled";
|
|
reg = <0xfe810000 0x8000>, <0x8bc 0x4>;
|
|
reg-names = "stmmaceth", "sti-ethconf";
|
|
|
|
interrupts = <0 133 0>, <0 134 0>, <0 135 0>;
|
|
interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
|
|
|
|
snps,pbl = <32>;
|
|
snps,mixed-burst;
|
|
|
|
st,syscon = <&syscfg_rear>;
|
|
resets = <&softreset STIH416_ETH0_SOFTRESET>;
|
|
reset-names = "stmmaceth";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_mii0>;
|
|
clock-names = "stmmaceth", "sti-ethclk";
|
|
clocks = <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>;
|
|
};
|
|
|
|
ethernet1: dwmac@fef08000 {
|
|
device_type = "network";
|
|
compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
|
|
status = "disabled";
|
|
reg = <0xfef08000 0x8000>, <0x7f0 0x4>;
|
|
reg-names = "stmmaceth", "sti-ethconf";
|
|
interrupts = <0 136 0>, <0 137 0>, <0 138 0>;
|
|
interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
|
|
|
|
snps,pbl = <32>;
|
|
snps,mixed-burst;
|
|
|
|
st,syscon = <&syscfg_sbc>;
|
|
|
|
resets = <&softreset STIH416_ETH1_SOFTRESET>;
|
|
reset-names = "stmmaceth";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_mii1>;
|
|
clock-names = "stmmaceth", "sti-ethclk";
|
|
clocks = <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>;
|
|
};
|
|
|
|
rc: rc@fe518000 {
|
|
compatible = "st,comms-irb";
|
|
reg = <0xfe518000 0x234>;
|
|
interrupts = <0 203 0>;
|
|
rx-mode = "infrared";
|
|
clocks = <&clk_sysin>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ir>;
|
|
resets = <&softreset STIH416_IRB_SOFTRESET>;
|
|
};
|
|
|
|
/* FSM */
|
|
spifsm: spifsm@fe902000 {
|
|
compatible = "st,spi-fsm";
|
|
reg = <0xfe902000 0x1000>;
|
|
pinctrl-0 = <&pinctrl_fsm>;
|
|
|
|
st,syscfg = <&syscfg_rear>;
|
|
st,boot-device-reg = <0x958>;
|
|
st,boot-device-spi = <0x1a>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
keyscan: keyscan@fe4b0000 {
|
|
compatible = "st,sti-keyscan";
|
|
status = "disabled";
|
|
reg = <0xfe4b0000 0x2000>;
|
|
interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
|
|
clocks = <&clk_sysin>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_keyscan>;
|
|
resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>,
|
|
<&softreset STIH416_KEYSCAN_SOFTRESET>;
|
|
};
|
|
};
|
|
};
|