mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-27 04:20:51 +07:00
331bbb595e
Both QSPI and GPMC-NAND share the same Pin (A8) from the SoC for Chip Select functionality. So both can't be enabled simultaneously. Disable QSPI node to prevent the pin conflict as well as be similar to 3.12 release. CC: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Pekon Gupta <pekon@pek-sem.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
629 lines
16 KiB
Plaintext
629 lines
16 KiB
Plaintext
/*
|
|
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/* AM43x EPOS EVM */
|
|
|
|
/dts-v1/;
|
|
|
|
#include "am4372.dtsi"
|
|
#include <dt-bindings/pinctrl/am43xx.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
|
|
/ {
|
|
model = "TI AM43x EPOS EVM";
|
|
compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
|
|
|
|
aliases {
|
|
display0 = &lcd0;
|
|
};
|
|
|
|
vmmcsd_fixed: fixedregulator-sd {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vmmcsd_fixed";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
enable-active-high;
|
|
};
|
|
|
|
lcd0: display {
|
|
compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
|
|
label = "lcd";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcd_pins>;
|
|
|
|
/*
|
|
* SelLCDorHDMI, LOW to select HDMI. This is not really the
|
|
* panel's enable GPIO, but we don't have HDMI driver support nor
|
|
* support to switch between two displays, so using this gpio as
|
|
* panel's enable should be safe.
|
|
*/
|
|
enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
|
|
|
|
panel-timing {
|
|
clock-frequency = <33000000>;
|
|
hactive = <800>;
|
|
vactive = <480>;
|
|
hfront-porch = <210>;
|
|
hback-porch = <16>;
|
|
hsync-len = <30>;
|
|
vback-porch = <10>;
|
|
vfront-porch = <22>;
|
|
vsync-len = <13>;
|
|
hsync-active = <0>;
|
|
vsync-active = <0>;
|
|
de-active = <1>;
|
|
pixelclk-active = <1>;
|
|
};
|
|
|
|
port {
|
|
lcd_in: endpoint {
|
|
remote-endpoint = <&dpi_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
am43xx_pinmux: pinmux@44e10800 {
|
|
cpsw_default: cpsw_default {
|
|
pinctrl-single,pins = <
|
|
/* Slave 1 */
|
|
0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */
|
|
0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
|
|
0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
|
|
0x118 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxdv.rmii1_rxdv */
|
|
0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
|
|
0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
|
|
0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
|
|
0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
|
|
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */
|
|
>;
|
|
};
|
|
|
|
cpsw_sleep: cpsw_sleep {
|
|
pinctrl-single,pins = <
|
|
/* Slave 1 reset value */
|
|
0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
>;
|
|
};
|
|
|
|
davinci_mdio_default: davinci_mdio_default {
|
|
pinctrl-single,pins = <
|
|
/* MDIO */
|
|
0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
|
|
0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
|
|
>;
|
|
};
|
|
|
|
davinci_mdio_sleep: davinci_mdio_sleep {
|
|
pinctrl-single,pins = <
|
|
/* MDIO reset value */
|
|
0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
>;
|
|
};
|
|
|
|
i2c0_pins: pinmux_i2c0_pins {
|
|
pinctrl-single,pins = <
|
|
0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
|
|
0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
|
|
>;
|
|
};
|
|
|
|
nand_flash_x8: nand_flash_x8 {
|
|
pinctrl-single,pins = <
|
|
0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.SELQSPIorNAND/GPIO */
|
|
0x0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
|
|
0x4 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
|
|
0x8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
|
|
0xc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
|
|
0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
|
|
0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
|
|
0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
|
|
0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
|
|
0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
|
|
0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */
|
|
0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
|
|
0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
|
|
0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
|
|
0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
|
|
0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
|
|
>;
|
|
};
|
|
|
|
ecap0_pins: backlight_pins {
|
|
pinctrl-single,pins = <
|
|
0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
|
|
>;
|
|
};
|
|
|
|
i2c2_pins: pinmux_i2c2_pins {
|
|
pinctrl-single,pins = <
|
|
0x1c0 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_sda.i2c2_sda */
|
|
0x1c4 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_scl.i2c2_scl */
|
|
>;
|
|
};
|
|
|
|
spi0_pins: pinmux_spi0_pins {
|
|
pinctrl-single,pins = <
|
|
0x150 (PIN_INPUT | MUX_MODE0) /* spi0_clk.spi0_clk */
|
|
0x154 (PIN_OUTPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
|
|
0x158 (PIN_INPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */
|
|
0x15c (PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
|
|
>;
|
|
};
|
|
|
|
spi1_pins: pinmux_spi1_pins {
|
|
pinctrl-single,pins = <
|
|
0x190 (PIN_INPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_clk */
|
|
0x194 (PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */
|
|
0x198 (PIN_INPUT | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */
|
|
0x19c (PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */
|
|
>;
|
|
};
|
|
|
|
mmc1_pins: pinmux_mmc1_pins {
|
|
pinctrl-single,pins = <
|
|
0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
|
|
>;
|
|
};
|
|
|
|
qspi1_default: qspi1_default {
|
|
pinctrl-single,pins = <
|
|
0x7c (PIN_INPUT_PULLUP | MUX_MODE3)
|
|
0x88 (PIN_INPUT_PULLUP | MUX_MODE2)
|
|
0x90 (PIN_INPUT_PULLUP | MUX_MODE3)
|
|
0x94 (PIN_INPUT_PULLUP | MUX_MODE3)
|
|
0x98 (PIN_INPUT_PULLUP | MUX_MODE3)
|
|
0x9c (PIN_INPUT_PULLUP | MUX_MODE3)
|
|
>;
|
|
};
|
|
|
|
pixcir_ts_pins: pixcir_ts_pins {
|
|
pinctrl-single,pins = <
|
|
0x44 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */
|
|
>;
|
|
};
|
|
|
|
hdq_pins: pinmux_hdq_pins {
|
|
pinctrl-single,pins = <
|
|
0x234 (PIN_INPUT_PULLUP | MUX_MODE1) /* cam1_wen.hdq_gpio */
|
|
>;
|
|
};
|
|
|
|
dss_pins: dss_pins {
|
|
pinctrl-single,pins = <
|
|
0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
|
|
0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
|
|
0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
|
|
0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1)
|
|
0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
|
|
0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
|
|
0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
|
|
0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
|
|
0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
|
|
0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
|
|
0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
|
|
0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
|
|
0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
|
|
0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
|
|
>;
|
|
};
|
|
|
|
lcd_pins: lcd_pins {
|
|
pinctrl-single,pins = <
|
|
/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
|
|
0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
|
|
>;
|
|
};
|
|
};
|
|
|
|
matrix_keypad: matrix_keypad@0 {
|
|
compatible = "gpio-matrix-keypad";
|
|
debounce-delay-ms = <5>;
|
|
col-scan-delay-us = <2>;
|
|
|
|
row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */
|
|
&gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */
|
|
&gpio0 14 GPIO_ACTIVE_HIGH /* Bank0, pin14 */
|
|
&gpio0 15 GPIO_ACTIVE_HIGH>; /* Bank0, pin15 */
|
|
|
|
col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH /* Bank3, pin9 */
|
|
&gpio3 10 GPIO_ACTIVE_HIGH /* Bank3, pin10 */
|
|
&gpio2 18 GPIO_ACTIVE_HIGH /* Bank2, pin18 */
|
|
&gpio2 19 GPIO_ACTIVE_HIGH>; /* Bank2, pin19 */
|
|
|
|
linux,keymap = <0x00000201 /* P1 */
|
|
0x01000204 /* P4 */
|
|
0x02000207 /* P7 */
|
|
0x0300020a /* NUMERIC_STAR */
|
|
0x00010202 /* P2 */
|
|
0x01010205 /* P5 */
|
|
0x02010208 /* P8 */
|
|
0x03010200 /* P0 */
|
|
0x00020203 /* P3 */
|
|
0x01020206 /* P6 */
|
|
0x02020209 /* P9 */
|
|
0x0302020b /* NUMERIC_POUND */
|
|
0x00030067 /* UP */
|
|
0x0103006a /* RIGHT */
|
|
0x0203006c /* DOWN */
|
|
0x03030069>; /* LEFT */
|
|
};
|
|
|
|
backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
|
|
brightness-levels = <0 51 53 56 62 75 101 152 255>;
|
|
default-brightness-level = <8>;
|
|
};
|
|
};
|
|
|
|
&mmc1 {
|
|
status = "okay";
|
|
vmmc-supply = <&vmmcsd_fixed>;
|
|
bus-width = <4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins>;
|
|
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
&mac {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&cpsw_default>;
|
|
pinctrl-1 = <&cpsw_sleep>;
|
|
status = "okay";
|
|
};
|
|
|
|
&davinci_mdio {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&davinci_mdio_default>;
|
|
pinctrl-1 = <&davinci_mdio_sleep>;
|
|
status = "okay";
|
|
};
|
|
|
|
&cpsw_emac0 {
|
|
phy_id = <&davinci_mdio>, <16>;
|
|
phy-mode = "rmii";
|
|
};
|
|
|
|
&cpsw_emac1 {
|
|
phy_id = <&davinci_mdio>, <1>;
|
|
phy-mode = "rmii";
|
|
};
|
|
|
|
&phy_sel {
|
|
rmii-clock-ext;
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
clock-frequency = <400000>;
|
|
|
|
tps65218: tps65218@24 {
|
|
reg = <0x24>;
|
|
compatible = "ti,tps65218";
|
|
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
|
|
interrupt-parent = <&gic>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
dcdc1: regulator-dcdc1 {
|
|
compatible = "ti,tps65218-dcdc1";
|
|
regulator-name = "vdd_core";
|
|
regulator-min-microvolt = <912000>;
|
|
regulator-max-microvolt = <1144000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
dcdc2: regulator-dcdc2 {
|
|
compatible = "ti,tps65218-dcdc2";
|
|
regulator-name = "vdd_mpu";
|
|
regulator-min-microvolt = <912000>;
|
|
regulator-max-microvolt = <1378000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
dcdc3: regulator-dcdc3 {
|
|
compatible = "ti,tps65218-dcdc3";
|
|
regulator-name = "vdcdc3";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
dcdc5: regulator-dcdc5 {
|
|
compatible = "ti,tps65218-dcdc5";
|
|
regulator-name = "v1_0bat";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
};
|
|
|
|
dcdc6: regulator-dcdc6 {
|
|
compatible = "ti,tps65218-dcdc6";
|
|
regulator-name = "v1_8bat";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo1: regulator-ldo1 {
|
|
compatible = "ti,tps65218-ldo1";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
at24@50 {
|
|
compatible = "at24,24c256";
|
|
pagesize = <64>;
|
|
reg = <0x50>;
|
|
};
|
|
|
|
pixcir_ts@5c {
|
|
compatible = "pixcir,pixcir_tangoc";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pixcir_ts_pins>;
|
|
reg = <0x5c>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <17 0>;
|
|
|
|
attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
|
|
|
|
touchscreen-size-x = <1024>;
|
|
touchscreen-size-y = <600>;
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&elm {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpmc {
|
|
status = "okay"; /* Disable QSPI when enabling GPMC (NAND) */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&nand_flash_x8>;
|
|
ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
|
|
nand@0,0 {
|
|
reg = <0 0 0>; /* CS0, offset 0 */
|
|
ti,nand-ecc-opt = "bch16";
|
|
ti,elm-id = <&elm>;
|
|
nand-bus-width = <8>;
|
|
gpmc,device-width = <1>;
|
|
gpmc,sync-clk-ps = <0>;
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <40>; /* tCEA + tCHZ + 1 */
|
|
gpmc,cs-wr-off-ns = <40>;
|
|
gpmc,adv-on-ns = <0>; /* cs-on-ns */
|
|
gpmc,adv-rd-off-ns = <25>; /* min( tALH + tALS + 1) */
|
|
gpmc,adv-wr-off-ns = <25>; /* min( tALH + tALS + 1) */
|
|
gpmc,we-on-ns = <0>; /* cs-on-ns */
|
|
gpmc,we-off-ns = <20>; /* we-on-time + tWP + 2 */
|
|
gpmc,oe-on-ns = <3>; /* cs-on-ns + tRR + 2 */
|
|
gpmc,oe-off-ns = <30>; /* oe-on-ns + tRP + 2 */
|
|
gpmc,access-ns = <30>; /* tCEA + 4*/
|
|
gpmc,rd-cycle-ns = <40>;
|
|
gpmc,wr-cycle-ns = <40>;
|
|
gpmc,wait-pin = <0>;
|
|
gpmc,bus-turnaround-ns = <0>;
|
|
gpmc,cycle2cycle-delay-ns = <0>;
|
|
gpmc,clk-activation-ns = <0>;
|
|
gpmc,wait-monitoring-ns = <0>;
|
|
gpmc,wr-access-ns = <40>;
|
|
gpmc,wr-data-mux-bus-ns = <0>;
|
|
/* MTD partition table */
|
|
/* All SPL-* partitions are sized to minimal length
|
|
* which can be independently programmable. For
|
|
* NAND flash this is equal to size of erase-block */
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
partition@0 {
|
|
label = "NAND.SPL";
|
|
reg = <0x00000000 0x00040000>;
|
|
};
|
|
partition@1 {
|
|
label = "NAND.SPL.backup1";
|
|
reg = <0x00040000 0x00040000>;
|
|
};
|
|
partition@2 {
|
|
label = "NAND.SPL.backup2";
|
|
reg = <0x00080000 0x00040000>;
|
|
};
|
|
partition@3 {
|
|
label = "NAND.SPL.backup3";
|
|
reg = <0x000C0000 0x00040000>;
|
|
};
|
|
partition@4 {
|
|
label = "NAND.u-boot-spl-os";
|
|
reg = <0x00100000 0x00080000>;
|
|
};
|
|
partition@5 {
|
|
label = "NAND.u-boot";
|
|
reg = <0x00180000 0x00100000>;
|
|
};
|
|
partition@6 {
|
|
label = "NAND.u-boot-env";
|
|
reg = <0x00280000 0x00040000>;
|
|
};
|
|
partition@7 {
|
|
label = "NAND.u-boot-env.backup1";
|
|
reg = <0x002C0000 0x00040000>;
|
|
};
|
|
partition@8 {
|
|
label = "NAND.kernel";
|
|
reg = <0x00300000 0x00700000>;
|
|
};
|
|
partition@9 {
|
|
label = "NAND.file-system";
|
|
reg = <0x00a00000 0x1f600000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&epwmss0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ecap0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ecap0_pins>;
|
|
};
|
|
|
|
&spi0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&spi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi1_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2_phy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb1 {
|
|
dr_mode = "peripheral";
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2_phy2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2 {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&qspi {
|
|
status = "disabled"; /* Disable GPMC (NAND) when enabling QSPI */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&qspi1_default>;
|
|
|
|
spi-max-frequency = <48000000>;
|
|
m25p80@0 {
|
|
compatible = "mx66l51235l";
|
|
spi-max-frequency = <48000000>;
|
|
reg = <0>;
|
|
spi-cpol;
|
|
spi-cpha;
|
|
spi-tx-bus-width = <1>;
|
|
spi-rx-bus-width = <4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
/* MTD partition table.
|
|
* The ROM checks the first 512KiB
|
|
* for a valid file to boot(XIP).
|
|
*/
|
|
partition@0 {
|
|
label = "QSPI.U_BOOT";
|
|
reg = <0x00000000 0x000080000>;
|
|
};
|
|
partition@1 {
|
|
label = "QSPI.U_BOOT.backup";
|
|
reg = <0x00080000 0x00080000>;
|
|
};
|
|
partition@2 {
|
|
label = "QSPI.U-BOOT-SPL_OS";
|
|
reg = <0x00100000 0x00010000>;
|
|
};
|
|
partition@3 {
|
|
label = "QSPI.U_BOOT_ENV";
|
|
reg = <0x00110000 0x00010000>;
|
|
};
|
|
partition@4 {
|
|
label = "QSPI.U-BOOT-ENV.backup";
|
|
reg = <0x00120000 0x00010000>;
|
|
};
|
|
partition@5 {
|
|
label = "QSPI.KERNEL";
|
|
reg = <0x00130000 0x0800000>;
|
|
};
|
|
partition@6 {
|
|
label = "QSPI.FILESYSTEM";
|
|
reg = <0x00930000 0x36D0000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&hdq {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hdq_pins>;
|
|
};
|
|
|
|
&dss {
|
|
status = "ok";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dss_pins>;
|
|
|
|
port {
|
|
dpi_out: endpoint@0 {
|
|
remote-endpoint = <&lcd_in>;
|
|
data-lines = <24>;
|
|
};
|
|
};
|
|
};
|