mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 00:35:19 +07:00
f11d59d87b
All devices using a triggered buffer need to attach and detach the trigger to the device in order to properly work. Instead of doing this in each and every driver by hand move this into the core. At this point in time, all drivers should have been resolved to attach/detach the poll-function in the same order. This patch removes all explicit calls of iio_triggered_buffer_postenable() & iio_triggered_buffer_predisable() in all drivers, since the core handles now the pollfunc attach/detach. The more peculiar change is for the 'at91-sama5d2_adc' driver, since it's not immediately obvious that removing the hooks doesn't break anything. Eugen was able to test on at91-sama5d2-adc driver, sama5d2-xplained board. All seems to be fine. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Tested-by: Eugen Hristev <eugen.hristev@microchip.com> #for at91-sama5d2-adc Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
202 lines
5.2 KiB
C
202 lines
5.2 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* STMicroelectronics hts221 sensor driver
|
|
*
|
|
* Copyright 2016 STMicroelectronics Inc.
|
|
*
|
|
* Lorenzo Bianconi <lorenzo.bianconi@st.com>
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irqreturn.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/bitfield.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/events.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
#include <linux/iio/buffer.h>
|
|
|
|
#include <linux/platform_data/st_sensors_pdata.h>
|
|
|
|
#include "hts221.h"
|
|
|
|
#define HTS221_REG_DRDY_HL_ADDR 0x22
|
|
#define HTS221_REG_DRDY_HL_MASK BIT(7)
|
|
#define HTS221_REG_DRDY_PP_OD_ADDR 0x22
|
|
#define HTS221_REG_DRDY_PP_OD_MASK BIT(6)
|
|
#define HTS221_REG_DRDY_EN_ADDR 0x22
|
|
#define HTS221_REG_DRDY_EN_MASK BIT(2)
|
|
#define HTS221_REG_STATUS_ADDR 0x27
|
|
#define HTS221_RH_DRDY_MASK BIT(1)
|
|
#define HTS221_TEMP_DRDY_MASK BIT(0)
|
|
|
|
static int hts221_trig_set_state(struct iio_trigger *trig, bool state)
|
|
{
|
|
struct iio_dev *iio_dev = iio_trigger_get_drvdata(trig);
|
|
struct hts221_hw *hw = iio_priv(iio_dev);
|
|
|
|
return regmap_update_bits(hw->regmap, HTS221_REG_DRDY_EN_ADDR,
|
|
HTS221_REG_DRDY_EN_MASK,
|
|
FIELD_PREP(HTS221_REG_DRDY_EN_MASK, state));
|
|
}
|
|
|
|
static const struct iio_trigger_ops hts221_trigger_ops = {
|
|
.set_trigger_state = hts221_trig_set_state,
|
|
};
|
|
|
|
static irqreturn_t hts221_trigger_handler_thread(int irq, void *private)
|
|
{
|
|
struct hts221_hw *hw = private;
|
|
int err, status;
|
|
|
|
err = regmap_read(hw->regmap, HTS221_REG_STATUS_ADDR, &status);
|
|
if (err < 0)
|
|
return IRQ_HANDLED;
|
|
|
|
/*
|
|
* H_DA bit (humidity data available) is routed to DRDY line.
|
|
* Humidity sample is computed after temperature one.
|
|
* Here we can assume data channels are both available if H_DA bit
|
|
* is set in status register
|
|
*/
|
|
if (!(status & HTS221_RH_DRDY_MASK))
|
|
return IRQ_NONE;
|
|
|
|
iio_trigger_poll_chained(hw->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
int hts221_allocate_trigger(struct iio_dev *iio_dev)
|
|
{
|
|
struct hts221_hw *hw = iio_priv(iio_dev);
|
|
struct st_sensors_platform_data *pdata = dev_get_platdata(hw->dev);
|
|
bool irq_active_low = false, open_drain = false;
|
|
unsigned long irq_type;
|
|
int err;
|
|
|
|
irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq));
|
|
|
|
switch (irq_type) {
|
|
case IRQF_TRIGGER_HIGH:
|
|
case IRQF_TRIGGER_RISING:
|
|
break;
|
|
case IRQF_TRIGGER_LOW:
|
|
case IRQF_TRIGGER_FALLING:
|
|
irq_active_low = true;
|
|
break;
|
|
default:
|
|
dev_info(hw->dev,
|
|
"mode %lx unsupported, using IRQF_TRIGGER_RISING\n",
|
|
irq_type);
|
|
irq_type = IRQF_TRIGGER_RISING;
|
|
break;
|
|
}
|
|
|
|
err = regmap_update_bits(hw->regmap, HTS221_REG_DRDY_HL_ADDR,
|
|
HTS221_REG_DRDY_HL_MASK,
|
|
FIELD_PREP(HTS221_REG_DRDY_HL_MASK,
|
|
irq_active_low));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
if (device_property_read_bool(hw->dev, "drive-open-drain") ||
|
|
(pdata && pdata->open_drain)) {
|
|
irq_type |= IRQF_SHARED;
|
|
open_drain = true;
|
|
}
|
|
|
|
err = regmap_update_bits(hw->regmap, HTS221_REG_DRDY_PP_OD_ADDR,
|
|
HTS221_REG_DRDY_PP_OD_MASK,
|
|
FIELD_PREP(HTS221_REG_DRDY_PP_OD_MASK,
|
|
open_drain));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = devm_request_threaded_irq(hw->dev, hw->irq, NULL,
|
|
hts221_trigger_handler_thread,
|
|
irq_type | IRQF_ONESHOT,
|
|
hw->name, hw);
|
|
if (err) {
|
|
dev_err(hw->dev, "failed to request trigger irq %d\n",
|
|
hw->irq);
|
|
return err;
|
|
}
|
|
|
|
hw->trig = devm_iio_trigger_alloc(hw->dev, "%s-trigger",
|
|
iio_dev->name);
|
|
if (!hw->trig)
|
|
return -ENOMEM;
|
|
|
|
iio_trigger_set_drvdata(hw->trig, iio_dev);
|
|
hw->trig->ops = &hts221_trigger_ops;
|
|
hw->trig->dev.parent = hw->dev;
|
|
iio_dev->trig = iio_trigger_get(hw->trig);
|
|
|
|
return devm_iio_trigger_register(hw->dev, hw->trig);
|
|
}
|
|
|
|
static int hts221_buffer_preenable(struct iio_dev *iio_dev)
|
|
{
|
|
return hts221_set_enable(iio_priv(iio_dev), true);
|
|
}
|
|
|
|
static int hts221_buffer_postdisable(struct iio_dev *iio_dev)
|
|
{
|
|
return hts221_set_enable(iio_priv(iio_dev), false);
|
|
}
|
|
|
|
static const struct iio_buffer_setup_ops hts221_buffer_ops = {
|
|
.preenable = hts221_buffer_preenable,
|
|
.postdisable = hts221_buffer_postdisable,
|
|
};
|
|
|
|
static irqreturn_t hts221_buffer_handler_thread(int irq, void *p)
|
|
{
|
|
u8 buffer[ALIGN(2 * HTS221_DATA_SIZE, sizeof(s64)) + sizeof(s64)];
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *iio_dev = pf->indio_dev;
|
|
struct hts221_hw *hw = iio_priv(iio_dev);
|
|
struct iio_chan_spec const *ch;
|
|
int err;
|
|
|
|
/* humidity data */
|
|
ch = &iio_dev->channels[HTS221_SENSOR_H];
|
|
err = regmap_bulk_read(hw->regmap, ch->address,
|
|
buffer, HTS221_DATA_SIZE);
|
|
if (err < 0)
|
|
goto out;
|
|
|
|
/* temperature data */
|
|
ch = &iio_dev->channels[HTS221_SENSOR_T];
|
|
err = regmap_bulk_read(hw->regmap, ch->address,
|
|
buffer + HTS221_DATA_SIZE, HTS221_DATA_SIZE);
|
|
if (err < 0)
|
|
goto out;
|
|
|
|
iio_push_to_buffers_with_timestamp(iio_dev, buffer,
|
|
iio_get_time_ns(iio_dev));
|
|
|
|
out:
|
|
iio_trigger_notify_done(hw->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
int hts221_allocate_buffers(struct iio_dev *iio_dev)
|
|
{
|
|
struct hts221_hw *hw = iio_priv(iio_dev);
|
|
return devm_iio_triggered_buffer_setup(hw->dev, iio_dev,
|
|
NULL, hts221_buffer_handler_thread,
|
|
&hts221_buffer_ops);
|
|
}
|
|
|
|
MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi@st.com>");
|
|
MODULE_DESCRIPTION("STMicroelectronics hts221 buffer driver");
|
|
MODULE_LICENSE("GPL v2");
|