mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
779857e187
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Rob Herring <robh@kernel.org>
39 lines
1.5 KiB
Plaintext
39 lines
1.5 KiB
Plaintext
Amlogic Meson SoC UART Serial Interface
|
|
=======================================
|
|
|
|
The Amlogic Meson SoC UART Serial Interface is present on a large range
|
|
of SoCs, and can be present either in the "Always-On" power domain or the
|
|
"Everything-Else" power domain.
|
|
|
|
The particularity of the "Always-On" Serial Interface is that the hardware
|
|
is active since power-on and does not need any clock gating and is usable
|
|
as very early serial console.
|
|
|
|
Required properties:
|
|
- compatible : compatible: value should be different for each SoC family as :
|
|
- Meson6 : "amlogic,meson6-uart"
|
|
- Meson8 : "amlogic,meson8-uart"
|
|
- Meson8b : "amlogic,meson8b-uart"
|
|
- GX (GXBB, GXL, GXM) : "amlogic,meson-gx-uart"
|
|
eventually followed by : "amlogic,meson-ao-uart" if this UART interface
|
|
is in the "Always-On" power domain.
|
|
- reg : offset and length of the register set for the device.
|
|
- interrupts : identifier to the device interrupt
|
|
- clocks : a list of phandle + clock-specifier pairs, one for each
|
|
entry in clock names.
|
|
- clock-names :
|
|
* "xtal" for external xtal clock identifier
|
|
* "pclk" for the bus core clock, either the clk81 clock or the gate clock
|
|
* "baud" for the source of the baudrate generator, can be either the xtal
|
|
or the pclk.
|
|
|
|
e.g.
|
|
uart_A: serial@84c0 {
|
|
compatible = "amlogic,meson-gx-uart";
|
|
reg = <0x0 0x84c0 0x0 0x14>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
|
|
/* Use xtal as baud rate clock source */
|
|
clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
|
|
clock-names = "xtal", "pclk", "baud";
|
|
};
|