mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 07:26:46 +07:00
145980a0b0
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
589 lines
15 KiB
C
589 lines
15 KiB
C
/*
|
|
* driver/mfd/asic3.c
|
|
*
|
|
* Compaq ASIC3 support.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Copyright 2001 Compaq Computer Corporation.
|
|
* Copyright 2004-2005 Phil Blundell
|
|
* Copyright 2007 OpenedHand Ltd.
|
|
*
|
|
* Authors: Phil Blundell <pb@handhelds.org>,
|
|
* Samuel Ortiz <sameo@openedhand.com>
|
|
*
|
|
*/
|
|
|
|
#include <linux/version.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/io.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/mfd/asic3.h>
|
|
|
|
static inline void asic3_write_register(struct asic3 *asic,
|
|
unsigned int reg, u32 value)
|
|
{
|
|
iowrite16(value, asic->mapping +
|
|
(reg >> asic->bus_shift));
|
|
}
|
|
|
|
static inline u32 asic3_read_register(struct asic3 *asic,
|
|
unsigned int reg)
|
|
{
|
|
return ioread16(asic->mapping +
|
|
(reg >> asic->bus_shift));
|
|
}
|
|
|
|
/* IRQs */
|
|
#define MAX_ASIC_ISR_LOOPS 20
|
|
#define ASIC3_GPIO_Base_INCR \
|
|
(ASIC3_GPIO_B_Base - ASIC3_GPIO_A_Base)
|
|
|
|
static void asic3_irq_flip_edge(struct asic3 *asic,
|
|
u32 base, int bit)
|
|
{
|
|
u16 edge;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
edge = asic3_read_register(asic,
|
|
base + ASIC3_GPIO_EdgeTrigger);
|
|
edge ^= bit;
|
|
asic3_write_register(asic,
|
|
base + ASIC3_GPIO_EdgeTrigger, edge);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
int iter, i;
|
|
unsigned long flags;
|
|
struct asic3 *asic;
|
|
|
|
desc->chip->ack(irq);
|
|
|
|
asic = desc->handler_data;
|
|
|
|
for (iter = 0 ; iter < MAX_ASIC_ISR_LOOPS; iter++) {
|
|
u32 status;
|
|
int bank;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
status = asic3_read_register(asic,
|
|
ASIC3_OFFSET(INTR, PIntStat));
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
|
|
/* Check all ten register bits */
|
|
if ((status & 0x3ff) == 0)
|
|
break;
|
|
|
|
/* Handle GPIO IRQs */
|
|
for (bank = 0; bank < ASIC3_NUM_GPIO_BANKS; bank++) {
|
|
if (status & (1 << bank)) {
|
|
unsigned long base, istat;
|
|
|
|
base = ASIC3_GPIO_A_Base
|
|
+ bank * ASIC3_GPIO_Base_INCR;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
istat = asic3_read_register(asic,
|
|
base +
|
|
ASIC3_GPIO_IntStatus);
|
|
/* Clearing IntStatus */
|
|
asic3_write_register(asic,
|
|
base +
|
|
ASIC3_GPIO_IntStatus, 0);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
|
|
for (i = 0; i < ASIC3_GPIOS_PER_BANK; i++) {
|
|
int bit = (1 << i);
|
|
unsigned int irqnr;
|
|
|
|
if (!(istat & bit))
|
|
continue;
|
|
|
|
irqnr = asic->irq_base +
|
|
(ASIC3_GPIOS_PER_BANK * bank)
|
|
+ i;
|
|
desc = irq_desc + irqnr;
|
|
desc->handle_irq(irqnr, desc);
|
|
if (asic->irq_bothedge[bank] & bit)
|
|
asic3_irq_flip_edge(asic, base,
|
|
bit);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Handle remaining IRQs in the status register */
|
|
for (i = ASIC3_NUM_GPIOS; i < ASIC3_NR_IRQS; i++) {
|
|
/* They start at bit 4 and go up */
|
|
if (status & (1 << (i - ASIC3_NUM_GPIOS + 4))) {
|
|
desc = irq_desc + + i;
|
|
desc->handle_irq(asic->irq_base + i,
|
|
desc);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (iter >= MAX_ASIC_ISR_LOOPS)
|
|
printk(KERN_ERR "%s: interrupt processing overrun\n",
|
|
__func__);
|
|
}
|
|
|
|
static inline int asic3_irq_to_bank(struct asic3 *asic, int irq)
|
|
{
|
|
int n;
|
|
|
|
n = (irq - asic->irq_base) >> 4;
|
|
|
|
return (n * (ASIC3_GPIO_B_Base - ASIC3_GPIO_A_Base));
|
|
}
|
|
|
|
static inline int asic3_irq_to_index(struct asic3 *asic, int irq)
|
|
{
|
|
return (irq - asic->irq_base) & 0xf;
|
|
}
|
|
|
|
static void asic3_mask_gpio_irq(unsigned int irq)
|
|
{
|
|
struct asic3 *asic = get_irq_chip_data(irq);
|
|
u32 val, bank, index;
|
|
unsigned long flags;
|
|
|
|
bank = asic3_irq_to_bank(asic, irq);
|
|
index = asic3_irq_to_index(asic, irq);
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
val = asic3_read_register(asic, bank + ASIC3_GPIO_Mask);
|
|
val |= 1 << index;
|
|
asic3_write_register(asic, bank + ASIC3_GPIO_Mask, val);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
static void asic3_mask_irq(unsigned int irq)
|
|
{
|
|
struct asic3 *asic = get_irq_chip_data(irq);
|
|
int regval;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
regval = asic3_read_register(asic,
|
|
ASIC3_INTR_Base +
|
|
ASIC3_INTR_IntMask);
|
|
|
|
regval &= ~(ASIC3_INTMASK_MASK0 <<
|
|
(irq - (asic->irq_base + ASIC3_NUM_GPIOS)));
|
|
|
|
asic3_write_register(asic,
|
|
ASIC3_INTR_Base +
|
|
ASIC3_INTR_IntMask,
|
|
regval);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
static void asic3_unmask_gpio_irq(unsigned int irq)
|
|
{
|
|
struct asic3 *asic = get_irq_chip_data(irq);
|
|
u32 val, bank, index;
|
|
unsigned long flags;
|
|
|
|
bank = asic3_irq_to_bank(asic, irq);
|
|
index = asic3_irq_to_index(asic, irq);
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
val = asic3_read_register(asic, bank + ASIC3_GPIO_Mask);
|
|
val &= ~(1 << index);
|
|
asic3_write_register(asic, bank + ASIC3_GPIO_Mask, val);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
static void asic3_unmask_irq(unsigned int irq)
|
|
{
|
|
struct asic3 *asic = get_irq_chip_data(irq);
|
|
int regval;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
regval = asic3_read_register(asic,
|
|
ASIC3_INTR_Base +
|
|
ASIC3_INTR_IntMask);
|
|
|
|
regval |= (ASIC3_INTMASK_MASK0 <<
|
|
(irq - (asic->irq_base + ASIC3_NUM_GPIOS)));
|
|
|
|
asic3_write_register(asic,
|
|
ASIC3_INTR_Base +
|
|
ASIC3_INTR_IntMask,
|
|
regval);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
static int asic3_gpio_irq_type(unsigned int irq, unsigned int type)
|
|
{
|
|
struct asic3 *asic = get_irq_chip_data(irq);
|
|
u32 bank, index;
|
|
u16 trigger, level, edge, bit;
|
|
unsigned long flags;
|
|
|
|
bank = asic3_irq_to_bank(asic, irq);
|
|
index = asic3_irq_to_index(asic, irq);
|
|
bit = 1<<index;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
level = asic3_read_register(asic,
|
|
bank + ASIC3_GPIO_LevelTrigger);
|
|
edge = asic3_read_register(asic,
|
|
bank + ASIC3_GPIO_EdgeTrigger);
|
|
trigger = asic3_read_register(asic,
|
|
bank + ASIC3_GPIO_TriggerType);
|
|
asic->irq_bothedge[(irq - asic->irq_base) >> 4] &= ~bit;
|
|
|
|
if (type == IRQT_RISING) {
|
|
trigger |= bit;
|
|
edge |= bit;
|
|
} else if (type == IRQT_FALLING) {
|
|
trigger |= bit;
|
|
edge &= ~bit;
|
|
} else if (type == IRQT_BOTHEDGE) {
|
|
trigger |= bit;
|
|
if (asic3_gpio_get_value(asic, irq - asic->irq_base))
|
|
edge &= ~bit;
|
|
else
|
|
edge |= bit;
|
|
asic->irq_bothedge[(irq - asic->irq_base) >> 4] |= bit;
|
|
} else if (type == IRQT_LOW) {
|
|
trigger &= ~bit;
|
|
level &= ~bit;
|
|
} else if (type == IRQT_HIGH) {
|
|
trigger &= ~bit;
|
|
level |= bit;
|
|
} else {
|
|
/*
|
|
* if type == IRQT_NOEDGE, we should mask interrupts, but
|
|
* be careful to not unmask them if mask was also called.
|
|
* Probably need internal state for mask.
|
|
*/
|
|
printk(KERN_NOTICE "asic3: irq type not changed.\n");
|
|
}
|
|
asic3_write_register(asic, bank + ASIC3_GPIO_LevelTrigger,
|
|
level);
|
|
asic3_write_register(asic, bank + ASIC3_GPIO_EdgeTrigger,
|
|
edge);
|
|
asic3_write_register(asic, bank + ASIC3_GPIO_TriggerType,
|
|
trigger);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip asic3_gpio_irq_chip = {
|
|
.name = "ASIC3-GPIO",
|
|
.ack = asic3_mask_gpio_irq,
|
|
.mask = asic3_mask_gpio_irq,
|
|
.unmask = asic3_unmask_gpio_irq,
|
|
.set_type = asic3_gpio_irq_type,
|
|
};
|
|
|
|
static struct irq_chip asic3_irq_chip = {
|
|
.name = "ASIC3",
|
|
.ack = asic3_mask_irq,
|
|
.mask = asic3_mask_irq,
|
|
.unmask = asic3_unmask_irq,
|
|
};
|
|
|
|
static int asic3_irq_probe(struct platform_device *pdev)
|
|
{
|
|
struct asic3 *asic = platform_get_drvdata(pdev);
|
|
unsigned long clksel = 0;
|
|
unsigned int irq, irq_base;
|
|
|
|
asic->irq_nr = platform_get_irq(pdev, 0);
|
|
if (asic->irq_nr < 0)
|
|
return asic->irq_nr;
|
|
|
|
/* turn on clock to IRQ controller */
|
|
clksel |= CLOCK_SEL_CX;
|
|
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL),
|
|
clksel);
|
|
|
|
irq_base = asic->irq_base;
|
|
|
|
for (irq = irq_base; irq < irq_base + ASIC3_NR_IRQS; irq++) {
|
|
if (irq < asic->irq_base + ASIC3_NUM_GPIOS)
|
|
set_irq_chip(irq, &asic3_gpio_irq_chip);
|
|
else
|
|
set_irq_chip(irq, &asic3_irq_chip);
|
|
|
|
set_irq_chip_data(irq, asic);
|
|
set_irq_handler(irq, handle_level_irq);
|
|
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
|
|
}
|
|
|
|
asic3_write_register(asic, ASIC3_OFFSET(INTR, IntMask),
|
|
ASIC3_INTMASK_GINTMASK);
|
|
|
|
set_irq_chained_handler(asic->irq_nr, asic3_irq_demux);
|
|
set_irq_type(asic->irq_nr, IRQT_RISING);
|
|
set_irq_data(asic->irq_nr, asic);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void asic3_irq_remove(struct platform_device *pdev)
|
|
{
|
|
struct asic3 *asic = platform_get_drvdata(pdev);
|
|
unsigned int irq, irq_base;
|
|
|
|
irq_base = asic->irq_base;
|
|
|
|
for (irq = irq_base; irq < irq_base + ASIC3_NR_IRQS; irq++) {
|
|
set_irq_flags(irq, 0);
|
|
set_irq_handler(irq, NULL);
|
|
set_irq_chip(irq, NULL);
|
|
set_irq_chip_data(irq, NULL);
|
|
}
|
|
set_irq_chained_handler(asic->irq_nr, NULL);
|
|
}
|
|
|
|
/* GPIOs */
|
|
static inline u32 asic3_get_gpio(struct asic3 *asic, unsigned int base,
|
|
unsigned int function)
|
|
{
|
|
return asic3_read_register(asic, base + function);
|
|
}
|
|
|
|
static void asic3_set_gpio(struct asic3 *asic, unsigned int base,
|
|
unsigned int function, u32 bits, u32 val)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&asic->lock, flags);
|
|
val |= (asic3_read_register(asic, base + function) & ~bits);
|
|
|
|
asic3_write_register(asic, base + function, val);
|
|
spin_unlock_irqrestore(&asic->lock, flags);
|
|
}
|
|
|
|
#define asic3_get_gpio_a(asic, fn) \
|
|
asic3_get_gpio(asic, ASIC3_GPIO_A_Base, ASIC3_GPIO_##fn)
|
|
#define asic3_get_gpio_b(asic, fn) \
|
|
asic3_get_gpio(asic, ASIC3_GPIO_B_Base, ASIC3_GPIO_##fn)
|
|
#define asic3_get_gpio_c(asic, fn) \
|
|
asic3_get_gpio(asic, ASIC3_GPIO_C_Base, ASIC3_GPIO_##fn)
|
|
#define asic3_get_gpio_d(asic, fn) \
|
|
asic3_get_gpio(asic, ASIC3_GPIO_D_Base, ASIC3_GPIO_##fn)
|
|
|
|
#define asic3_set_gpio_a(asic, fn, bits, val) \
|
|
asic3_set_gpio(asic, ASIC3_GPIO_A_Base, ASIC3_GPIO_##fn, bits, val)
|
|
#define asic3_set_gpio_b(asic, fn, bits, val) \
|
|
asic3_set_gpio(asic, ASIC3_GPIO_B_Base, ASIC3_GPIO_##fn, bits, val)
|
|
#define asic3_set_gpio_c(asic, fn, bits, val) \
|
|
asic3_set_gpio(asic, ASIC3_GPIO_C_Base, ASIC3_GPIO_##fn, bits, val)
|
|
#define asic3_set_gpio_d(asic, fn, bits, val) \
|
|
asic3_set_gpio(asic, ASIC3_GPIO_D_Base, ASIC3_GPIO_##fn, bits, val)
|
|
|
|
#define asic3_set_gpio_banks(asic, fn, bits, pdata, field) \
|
|
do { \
|
|
asic3_set_gpio_a((asic), fn, (bits), (pdata)->gpio_a.field); \
|
|
asic3_set_gpio_b((asic), fn, (bits), (pdata)->gpio_b.field); \
|
|
asic3_set_gpio_c((asic), fn, (bits), (pdata)->gpio_c.field); \
|
|
asic3_set_gpio_d((asic), fn, (bits), (pdata)->gpio_d.field); \
|
|
} while (0)
|
|
|
|
int asic3_gpio_get_value(struct asic3 *asic, unsigned gpio)
|
|
{
|
|
u32 mask = ASIC3_GPIO_bit(gpio);
|
|
|
|
switch (gpio >> 4) {
|
|
case ASIC3_GPIO_BANK_A:
|
|
return asic3_get_gpio_a(asic, Status) & mask;
|
|
case ASIC3_GPIO_BANK_B:
|
|
return asic3_get_gpio_b(asic, Status) & mask;
|
|
case ASIC3_GPIO_BANK_C:
|
|
return asic3_get_gpio_c(asic, Status) & mask;
|
|
case ASIC3_GPIO_BANK_D:
|
|
return asic3_get_gpio_d(asic, Status) & mask;
|
|
default:
|
|
printk(KERN_ERR "%s: invalid GPIO value 0x%x",
|
|
__func__, gpio);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(asic3_gpio_get_value);
|
|
|
|
void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val)
|
|
{
|
|
u32 mask = ASIC3_GPIO_bit(gpio);
|
|
u32 bitval = 0;
|
|
if (val)
|
|
bitval = mask;
|
|
|
|
switch (gpio >> 4) {
|
|
case ASIC3_GPIO_BANK_A:
|
|
asic3_set_gpio_a(asic, Out, mask, bitval);
|
|
return;
|
|
case ASIC3_GPIO_BANK_B:
|
|
asic3_set_gpio_b(asic, Out, mask, bitval);
|
|
return;
|
|
case ASIC3_GPIO_BANK_C:
|
|
asic3_set_gpio_c(asic, Out, mask, bitval);
|
|
return;
|
|
case ASIC3_GPIO_BANK_D:
|
|
asic3_set_gpio_d(asic, Out, mask, bitval);
|
|
return;
|
|
default:
|
|
printk(KERN_ERR "%s: invalid GPIO value 0x%x",
|
|
__func__, gpio);
|
|
return;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(asic3_gpio_set_value);
|
|
|
|
static int asic3_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct asic3_platform_data *pdata = pdev->dev.platform_data;
|
|
struct asic3 *asic = platform_get_drvdata(pdev);
|
|
|
|
asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, Mask), 0xffff);
|
|
asic3_write_register(asic, ASIC3_GPIO_OFFSET(B, Mask), 0xffff);
|
|
asic3_write_register(asic, ASIC3_GPIO_OFFSET(C, Mask), 0xffff);
|
|
asic3_write_register(asic, ASIC3_GPIO_OFFSET(D, Mask), 0xffff);
|
|
|
|
asic3_set_gpio_a(asic, SleepMask, 0xffff, 0xffff);
|
|
asic3_set_gpio_b(asic, SleepMask, 0xffff, 0xffff);
|
|
asic3_set_gpio_c(asic, SleepMask, 0xffff, 0xffff);
|
|
asic3_set_gpio_d(asic, SleepMask, 0xffff, 0xffff);
|
|
|
|
if (pdata) {
|
|
asic3_set_gpio_banks(asic, Out, 0xffff, pdata, init);
|
|
asic3_set_gpio_banks(asic, Direction, 0xffff, pdata, dir);
|
|
asic3_set_gpio_banks(asic, SleepMask, 0xffff, pdata,
|
|
sleep_mask);
|
|
asic3_set_gpio_banks(asic, SleepOut, 0xffff, pdata, sleep_out);
|
|
asic3_set_gpio_banks(asic, BattFaultOut, 0xffff, pdata,
|
|
batt_fault_out);
|
|
asic3_set_gpio_banks(asic, SleepConf, 0xffff, pdata,
|
|
sleep_conf);
|
|
asic3_set_gpio_banks(asic, AltFunction, 0xffff, pdata,
|
|
alt_function);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void asic3_gpio_remove(struct platform_device *pdev)
|
|
{
|
|
return;
|
|
}
|
|
|
|
|
|
/* Core */
|
|
static int asic3_probe(struct platform_device *pdev)
|
|
{
|
|
struct asic3_platform_data *pdata = pdev->dev.platform_data;
|
|
struct asic3 *asic;
|
|
struct resource *mem;
|
|
unsigned long clksel;
|
|
int ret;
|
|
|
|
asic = kzalloc(sizeof(struct asic3), GFP_KERNEL);
|
|
if (!asic)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_init(&asic->lock);
|
|
platform_set_drvdata(pdev, asic);
|
|
asic->dev = &pdev->dev;
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!mem) {
|
|
ret = -ENOMEM;
|
|
printk(KERN_ERR "asic3: no MEM resource\n");
|
|
goto err_out_1;
|
|
}
|
|
|
|
asic->mapping = ioremap(mem->start, PAGE_SIZE);
|
|
if (!asic->mapping) {
|
|
ret = -ENOMEM;
|
|
printk(KERN_ERR "asic3: couldn't ioremap\n");
|
|
goto err_out_1;
|
|
}
|
|
|
|
asic->irq_base = pdata->irq_base;
|
|
|
|
if (pdata && pdata->bus_shift)
|
|
asic->bus_shift = 2 - pdata->bus_shift;
|
|
else
|
|
asic->bus_shift = 0;
|
|
|
|
clksel = 0;
|
|
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), clksel);
|
|
|
|
ret = asic3_irq_probe(pdev);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "asic3: couldn't probe IRQs\n");
|
|
goto err_out_2;
|
|
}
|
|
asic3_gpio_probe(pdev);
|
|
|
|
if (pdata->children) {
|
|
int i;
|
|
for (i = 0; i < pdata->n_children; i++) {
|
|
pdata->children[i]->dev.parent = &pdev->dev;
|
|
platform_device_register(pdata->children[i]);
|
|
}
|
|
}
|
|
|
|
printk(KERN_INFO "ASIC3 Core driver\n");
|
|
|
|
return 0;
|
|
|
|
err_out_2:
|
|
iounmap(asic->mapping);
|
|
err_out_1:
|
|
kfree(asic);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int asic3_remove(struct platform_device *pdev)
|
|
{
|
|
struct asic3 *asic = platform_get_drvdata(pdev);
|
|
|
|
asic3_gpio_remove(pdev);
|
|
asic3_irq_remove(pdev);
|
|
|
|
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), 0);
|
|
|
|
iounmap(asic->mapping);
|
|
|
|
kfree(asic);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void asic3_shutdown(struct platform_device *pdev)
|
|
{
|
|
}
|
|
|
|
static struct platform_driver asic3_device_driver = {
|
|
.driver = {
|
|
.name = "asic3",
|
|
},
|
|
.probe = asic3_probe,
|
|
.remove = __devexit_p(asic3_remove),
|
|
.shutdown = asic3_shutdown,
|
|
};
|
|
|
|
static int __init asic3_init(void)
|
|
{
|
|
int retval = 0;
|
|
retval = platform_driver_register(&asic3_device_driver);
|
|
return retval;
|
|
}
|
|
|
|
subsys_initcall(asic3_init);
|