Geert Uytterhoeven ef4a3bc8da arm64: dts: renesas: ulcb: Add EthernetAVB PHY reset ... Describe the GPIO used to reset the Ethernet PHY for EthernetAVB. This allows the driver to reset the PHY during probe and after system resume. On ULCB, the enable pin of the regulator providing PHY power is always pulled high, but the driver may still need to reset the PHY if this wasn't done by the bootloader before. Inspired by patches in the BSP for the individual Salvator-X/XS boards by Kazuya Mizuguchi. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>		2017-12-11 08:03:24 +01:00
..
Makefile	arm64: dts: renesas: initial V3MSK board device tree	2017-12-04 09:36:26 +01:00
r8a7795-es1-h3ulcb-kf.dts	arm64: dts: h3ulcb-kf: ES1.x SoC initial device tree	2017-10-10 09:51:17 +02:00
r8a7795-es1-h3ulcb.dts	arm64: dts: renesas: Move CPG_AUDIO_CLK_I from board to soc files	2017-07-27 15:53:58 +02:00
r8a7795-es1-salvator-x.dts	arm64: dts: renesas: r8a7795-es1-salvator-x: Add SoC name to file header	2017-11-28 09:36:33 +01:00
r8a7795-es1.dtsi	arm64: dts: renesas: r8a7795: Increase the number of GPIO bank 1 ports to 29	2017-11-28 09:36:38 +01:00
r8a7795-h3ulcb-kf.dts	arm64: dts: h3ulcb-kf: ES2.0+ SoC initial device tree	2017-10-10 09:51:18 +02:00
r8a7795-h3ulcb.dts	arm64: dts: r8a7795: h3ulcb: Add DU external dot clocks	2017-07-27 15:59:45 +02:00
r8a7795-salvator-x.dts	arm64: dts: renesas: r8a7795-salvator-x: Add SoC name to file header	2017-11-28 09:36:34 +01:00
r8a7795-salvator-xs.dts	arm64: dts: renesas: r8a7795-salvator-xs: Add SoC name to file header	2017-11-28 09:36:35 +01:00
r8a7795.dtsi	arm64: dts: renesas: r8a7795: Move nodes which have no reg property out of bus	2017-12-07 10:58:29 +01:00
r8a7796-m3ulcb-kf.dts	arm64: dts: m3ulcb-kf: initial device tree	2017-10-10 09:51:17 +02:00
r8a7796-m3ulcb.dts	arm64: dts: r8a7796: m3ulcb: Add DU external dot clocks	2017-07-27 15:59:54 +02:00
r8a7796-salvator-x.dts	arm64: dts: renesas: r8a7796-salvator-x: Add SoC name to file header	2017-11-28 09:36:35 +01:00
r8a7796-salvator-xs.dts	arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W	2017-11-28 09:36:13 +01:00
r8a7796.dtsi	arm64: dts: renesas: r8a7796: Enable IPMMU-DS0, DS1, MP, VI0, VC0 and MM	2017-11-28 09:36:17 +01:00
r8a77970-eagle.dts	arm64: dts: renesas: eagle: Enable watchdog timer	2017-11-28 09:36:12 +01:00
r8a77970-v3msk.dts	arm64: dts: renesas: v3msk: add EtherAVB support	2017-12-04 09:36:55 +01:00
r8a77970.dtsi	arm64: dts: renesas: r8a77970: use SYSC power domain macros	2017-12-05 09:30:48 +01:00
r8a77995-draak.dts	arm64: dts: renesas: r8a77995: draak: enable PWM channel 0 and 1	2017-10-10 09:51:15 +02:00
r8a77995.dtsi	arm64: dts: renesas: r8a77995: Connect Ethernet-AVB to IPMMU-RT	2017-11-28 09:45:17 +01:00
salvator-common.dtsi	arm64: dts: renesas: salvator-common: Add EthernetAVB PHY reset	2017-12-11 08:02:21 +01:00
salvator-x.dtsi	arm64: dts: renesas: Extract common Salvator-X/XS board support	2017-06-12 11:30:04 +02:00
salvator-xs.dtsi	arm64: dts: salvator-xs: Add VC6 clock generator	2017-07-27 16:00:18 +02:00
ulcb-kf.dtsi	arm64: dts: renesas: ulcb-kf: add dr_mode property for USB2.0 channel 0	2017-11-28 09:36:18 +01:00
ulcb.dtsi	arm64: dts: renesas: ulcb: Add EthernetAVB PHY reset	2017-12-11 08:03:24 +01:00