mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-18 04:19:24 +07:00
ef24ba7091
NO_IRQ has been == 0 on powerpc for just over ten years (since commit
0ebfff1491
("[POWERPC] Add new interrupt mapping core and change
platforms to use it")). It's also 0 on most other arches.
Although it's fairly harmless, every now and then it causes confusion
when a driver is built on powerpc and another arch which doesn't define
NO_IRQ. There's at least 6 definitions of NO_IRQ in drivers/, at least
some of which are to work around that problem.
So we'd like to remove it. This is fairly trivial in the arch code, we
just convert:
if (irq == NO_IRQ) to if (!irq)
if (irq != NO_IRQ) to if (irq)
irq = NO_IRQ; to irq = 0;
return NO_IRQ; to return 0;
And a few other odd cases as well.
At least for now we keep the #define NO_IRQ, because there is driver
code that uses NO_IRQ and the fixes to remove those will go via other
trees.
Note we also change some occurrences in PPC sound drivers, drivers/ps3,
and drivers/macintosh.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
449 lines
9.0 KiB
C
449 lines
9.0 KiB
C
/*
|
|
* MPC83xx suspend support
|
|
*
|
|
* Author: Scott Wood <scottwood@freescale.com>
|
|
*
|
|
* Copyright (c) 2006-2007 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/pm.h>
|
|
#include <linux/types.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/freezer.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/fsl_devices.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/export.h>
|
|
|
|
#include <asm/reg.h>
|
|
#include <asm/io.h>
|
|
#include <asm/time.h>
|
|
#include <asm/mpc6xx.h>
|
|
#include <asm/switch_to.h>
|
|
|
|
#include <sysdev/fsl_soc.h>
|
|
|
|
#define PMCCR1_NEXT_STATE 0x0C /* Next state for power management */
|
|
#define PMCCR1_NEXT_STATE_SHIFT 2
|
|
#define PMCCR1_CURR_STATE 0x03 /* Current state for power management*/
|
|
#define IMMR_SYSCR_OFFSET 0x100
|
|
#define IMMR_RCW_OFFSET 0x900
|
|
#define RCW_PCI_HOST 0x80000000
|
|
|
|
void mpc83xx_enter_deep_sleep(phys_addr_t immrbase);
|
|
|
|
struct mpc83xx_pmc {
|
|
u32 config;
|
|
#define PMCCR_DLPEN 2 /* DDR SDRAM low power enable */
|
|
#define PMCCR_SLPEN 1 /* System low power enable */
|
|
|
|
u32 event;
|
|
u32 mask;
|
|
/* All but PMCI are deep-sleep only */
|
|
#define PMCER_GPIO 0x100
|
|
#define PMCER_PCI 0x080
|
|
#define PMCER_USB 0x040
|
|
#define PMCER_ETSEC1 0x020
|
|
#define PMCER_ETSEC2 0x010
|
|
#define PMCER_TIMER 0x008
|
|
#define PMCER_INT1 0x004
|
|
#define PMCER_INT2 0x002
|
|
#define PMCER_PMCI 0x001
|
|
#define PMCER_ALL 0x1FF
|
|
|
|
/* deep-sleep only */
|
|
u32 config1;
|
|
#define PMCCR1_USE_STATE 0x80000000
|
|
#define PMCCR1_PME_EN 0x00000080
|
|
#define PMCCR1_ASSERT_PME 0x00000040
|
|
#define PMCCR1_POWER_OFF 0x00000020
|
|
|
|
/* deep-sleep only */
|
|
u32 config2;
|
|
};
|
|
|
|
struct mpc83xx_rcw {
|
|
u32 rcwlr;
|
|
u32 rcwhr;
|
|
};
|
|
|
|
struct mpc83xx_clock {
|
|
u32 spmr;
|
|
u32 occr;
|
|
u32 sccr;
|
|
};
|
|
|
|
struct mpc83xx_syscr {
|
|
__be32 sgprl;
|
|
__be32 sgprh;
|
|
__be32 spridr;
|
|
__be32 :32;
|
|
__be32 spcr;
|
|
__be32 sicrl;
|
|
__be32 sicrh;
|
|
};
|
|
|
|
struct mpc83xx_saved {
|
|
u32 sicrl;
|
|
u32 sicrh;
|
|
u32 sccr;
|
|
};
|
|
|
|
struct pmc_type {
|
|
int has_deep_sleep;
|
|
};
|
|
|
|
static struct platform_device *pmc_dev;
|
|
static int has_deep_sleep, deep_sleeping;
|
|
static int pmc_irq;
|
|
static struct mpc83xx_pmc __iomem *pmc_regs;
|
|
static struct mpc83xx_clock __iomem *clock_regs;
|
|
static struct mpc83xx_syscr __iomem *syscr_regs;
|
|
static struct mpc83xx_saved saved_regs;
|
|
static int is_pci_agent, wake_from_pci;
|
|
static phys_addr_t immrbase;
|
|
static int pci_pm_state;
|
|
static DECLARE_WAIT_QUEUE_HEAD(agent_wq);
|
|
|
|
int fsl_deep_sleep(void)
|
|
{
|
|
return deep_sleeping;
|
|
}
|
|
EXPORT_SYMBOL(fsl_deep_sleep);
|
|
|
|
static int mpc83xx_change_state(void)
|
|
{
|
|
u32 curr_state;
|
|
u32 reg_cfg1 = in_be32(&pmc_regs->config1);
|
|
|
|
if (is_pci_agent) {
|
|
pci_pm_state = (reg_cfg1 & PMCCR1_NEXT_STATE) >>
|
|
PMCCR1_NEXT_STATE_SHIFT;
|
|
curr_state = reg_cfg1 & PMCCR1_CURR_STATE;
|
|
|
|
if (curr_state != pci_pm_state) {
|
|
reg_cfg1 &= ~PMCCR1_CURR_STATE;
|
|
reg_cfg1 |= pci_pm_state;
|
|
out_be32(&pmc_regs->config1, reg_cfg1);
|
|
|
|
wake_up(&agent_wq);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t pmc_irq_handler(int irq, void *dev_id)
|
|
{
|
|
u32 event = in_be32(&pmc_regs->event);
|
|
int ret = IRQ_NONE;
|
|
|
|
if (mpc83xx_change_state())
|
|
ret = IRQ_HANDLED;
|
|
|
|
if (event) {
|
|
out_be32(&pmc_regs->event, event);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void mpc83xx_suspend_restore_regs(void)
|
|
{
|
|
out_be32(&syscr_regs->sicrl, saved_regs.sicrl);
|
|
out_be32(&syscr_regs->sicrh, saved_regs.sicrh);
|
|
out_be32(&clock_regs->sccr, saved_regs.sccr);
|
|
}
|
|
|
|
static void mpc83xx_suspend_save_regs(void)
|
|
{
|
|
saved_regs.sicrl = in_be32(&syscr_regs->sicrl);
|
|
saved_regs.sicrh = in_be32(&syscr_regs->sicrh);
|
|
saved_regs.sccr = in_be32(&clock_regs->sccr);
|
|
}
|
|
|
|
static int mpc83xx_suspend_enter(suspend_state_t state)
|
|
{
|
|
int ret = -EAGAIN;
|
|
|
|
/* Don't go to sleep if there's a race where pci_pm_state changes
|
|
* between the agent thread checking it and the PM code disabling
|
|
* interrupts.
|
|
*/
|
|
if (wake_from_pci) {
|
|
if (pci_pm_state != (deep_sleeping ? 3 : 2))
|
|
goto out;
|
|
|
|
out_be32(&pmc_regs->config1,
|
|
in_be32(&pmc_regs->config1) | PMCCR1_PME_EN);
|
|
}
|
|
|
|
/* Put the system into low-power mode and the RAM
|
|
* into self-refresh mode once the core goes to
|
|
* sleep.
|
|
*/
|
|
|
|
out_be32(&pmc_regs->config, PMCCR_SLPEN | PMCCR_DLPEN);
|
|
|
|
/* If it has deep sleep (i.e. it's an 831x or compatible),
|
|
* disable power to the core upon entering sleep mode. This will
|
|
* require going through the boot firmware upon a wakeup event.
|
|
*/
|
|
|
|
if (deep_sleeping) {
|
|
mpc83xx_suspend_save_regs();
|
|
|
|
out_be32(&pmc_regs->mask, PMCER_ALL);
|
|
|
|
out_be32(&pmc_regs->config1,
|
|
in_be32(&pmc_regs->config1) | PMCCR1_POWER_OFF);
|
|
|
|
enable_kernel_fp();
|
|
|
|
mpc83xx_enter_deep_sleep(immrbase);
|
|
|
|
out_be32(&pmc_regs->config1,
|
|
in_be32(&pmc_regs->config1) & ~PMCCR1_POWER_OFF);
|
|
|
|
out_be32(&pmc_regs->mask, PMCER_PMCI);
|
|
|
|
mpc83xx_suspend_restore_regs();
|
|
} else {
|
|
out_be32(&pmc_regs->mask, PMCER_PMCI);
|
|
|
|
mpc6xx_enter_standby();
|
|
}
|
|
|
|
ret = 0;
|
|
|
|
out:
|
|
out_be32(&pmc_regs->config1,
|
|
in_be32(&pmc_regs->config1) & ~PMCCR1_PME_EN);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void mpc83xx_suspend_end(void)
|
|
{
|
|
deep_sleeping = 0;
|
|
}
|
|
|
|
static int mpc83xx_suspend_valid(suspend_state_t state)
|
|
{
|
|
return state == PM_SUSPEND_STANDBY || state == PM_SUSPEND_MEM;
|
|
}
|
|
|
|
static int mpc83xx_suspend_begin(suspend_state_t state)
|
|
{
|
|
switch (state) {
|
|
case PM_SUSPEND_STANDBY:
|
|
deep_sleeping = 0;
|
|
return 0;
|
|
|
|
case PM_SUSPEND_MEM:
|
|
if (has_deep_sleep)
|
|
deep_sleeping = 1;
|
|
|
|
return 0;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int agent_thread_fn(void *data)
|
|
{
|
|
while (1) {
|
|
wait_event_interruptible(agent_wq, pci_pm_state >= 2);
|
|
try_to_freeze();
|
|
|
|
if (signal_pending(current) || pci_pm_state < 2)
|
|
continue;
|
|
|
|
/* With a preemptible kernel (or SMP), this could race with
|
|
* a userspace-driven suspend request. It's probably best
|
|
* to avoid mixing the two with such a configuration (or
|
|
* else fix it by adding a mutex to state_store that we can
|
|
* synchronize with).
|
|
*/
|
|
|
|
wake_from_pci = 1;
|
|
|
|
pm_suspend(pci_pm_state == 3 ? PM_SUSPEND_MEM :
|
|
PM_SUSPEND_STANDBY);
|
|
|
|
wake_from_pci = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mpc83xx_set_agent(void)
|
|
{
|
|
out_be32(&pmc_regs->config1, PMCCR1_USE_STATE);
|
|
out_be32(&pmc_regs->mask, PMCER_PMCI);
|
|
|
|
kthread_run(agent_thread_fn, NULL, "PCI power mgt");
|
|
}
|
|
|
|
static int mpc83xx_is_pci_agent(void)
|
|
{
|
|
struct mpc83xx_rcw __iomem *rcw_regs;
|
|
int ret;
|
|
|
|
rcw_regs = ioremap(get_immrbase() + IMMR_RCW_OFFSET,
|
|
sizeof(struct mpc83xx_rcw));
|
|
|
|
if (!rcw_regs)
|
|
return -ENOMEM;
|
|
|
|
ret = !(in_be32(&rcw_regs->rcwhr) & RCW_PCI_HOST);
|
|
|
|
iounmap(rcw_regs);
|
|
return ret;
|
|
}
|
|
|
|
static const struct platform_suspend_ops mpc83xx_suspend_ops = {
|
|
.valid = mpc83xx_suspend_valid,
|
|
.begin = mpc83xx_suspend_begin,
|
|
.enter = mpc83xx_suspend_enter,
|
|
.end = mpc83xx_suspend_end,
|
|
};
|
|
|
|
static const struct of_device_id pmc_match[];
|
|
static int pmc_probe(struct platform_device *ofdev)
|
|
{
|
|
const struct of_device_id *match;
|
|
struct device_node *np = ofdev->dev.of_node;
|
|
struct resource res;
|
|
const struct pmc_type *type;
|
|
int ret = 0;
|
|
|
|
match = of_match_device(pmc_match, &ofdev->dev);
|
|
if (!match)
|
|
return -EINVAL;
|
|
|
|
type = match->data;
|
|
|
|
if (!of_device_is_available(np))
|
|
return -ENODEV;
|
|
|
|
has_deep_sleep = type->has_deep_sleep;
|
|
immrbase = get_immrbase();
|
|
pmc_dev = ofdev;
|
|
|
|
is_pci_agent = mpc83xx_is_pci_agent();
|
|
if (is_pci_agent < 0)
|
|
return is_pci_agent;
|
|
|
|
ret = of_address_to_resource(np, 0, &res);
|
|
if (ret)
|
|
return -ENODEV;
|
|
|
|
pmc_irq = irq_of_parse_and_map(np, 0);
|
|
if (pmc_irq) {
|
|
ret = request_irq(pmc_irq, pmc_irq_handler, IRQF_SHARED,
|
|
"pmc", ofdev);
|
|
|
|
if (ret)
|
|
return -EBUSY;
|
|
}
|
|
|
|
pmc_regs = ioremap(res.start, sizeof(struct mpc83xx_pmc));
|
|
|
|
if (!pmc_regs) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
ret = of_address_to_resource(np, 1, &res);
|
|
if (ret) {
|
|
ret = -ENODEV;
|
|
goto out_pmc;
|
|
}
|
|
|
|
clock_regs = ioremap(res.start, sizeof(struct mpc83xx_pmc));
|
|
|
|
if (!clock_regs) {
|
|
ret = -ENOMEM;
|
|
goto out_pmc;
|
|
}
|
|
|
|
if (has_deep_sleep) {
|
|
syscr_regs = ioremap(immrbase + IMMR_SYSCR_OFFSET,
|
|
sizeof(*syscr_regs));
|
|
if (!syscr_regs) {
|
|
ret = -ENOMEM;
|
|
goto out_syscr;
|
|
}
|
|
}
|
|
|
|
if (is_pci_agent)
|
|
mpc83xx_set_agent();
|
|
|
|
suspend_set_ops(&mpc83xx_suspend_ops);
|
|
return 0;
|
|
|
|
out_syscr:
|
|
iounmap(clock_regs);
|
|
out_pmc:
|
|
iounmap(pmc_regs);
|
|
out:
|
|
if (pmc_irq)
|
|
free_irq(pmc_irq, ofdev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int pmc_remove(struct platform_device *ofdev)
|
|
{
|
|
return -EPERM;
|
|
};
|
|
|
|
static struct pmc_type pmc_types[] = {
|
|
{
|
|
.has_deep_sleep = 1,
|
|
},
|
|
{
|
|
.has_deep_sleep = 0,
|
|
}
|
|
};
|
|
|
|
static const struct of_device_id pmc_match[] = {
|
|
{
|
|
.compatible = "fsl,mpc8313-pmc",
|
|
.data = &pmc_types[0],
|
|
},
|
|
{
|
|
.compatible = "fsl,mpc8349-pmc",
|
|
.data = &pmc_types[1],
|
|
},
|
|
{}
|
|
};
|
|
|
|
static struct platform_driver pmc_driver = {
|
|
.driver = {
|
|
.name = "mpc83xx-pmc",
|
|
.of_match_table = pmc_match,
|
|
},
|
|
.probe = pmc_probe,
|
|
.remove = pmc_remove
|
|
};
|
|
|
|
static int pmc_init(void)
|
|
{
|
|
return platform_driver_register(&pmc_driver);
|
|
}
|
|
device_initcall(pmc_init);
|