mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-26 06:40:54 +07:00
3971a230f9
PHY locking is required between two ports for some external PHYs. Since initialization was done in the common init function (called only on the first port initialization) rather than in the port init function, there was in fact no PHY locking between the ports. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
8046 lines
213 KiB
C
8046 lines
213 KiB
C
/* bnx2x_main.c: Broadcom Everest network driver.
|
|
*
|
|
* Copyright (c) 2007-2010 Broadcom Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation.
|
|
*
|
|
* Maintained by: Eilon Greenstein <eilong@broadcom.com>
|
|
* Written by: Eliezer Tamir
|
|
* Based on code from Michael Chan's bnx2 driver
|
|
* UDP CSUM errata workaround by Arik Gendelman
|
|
* Slowpath and fastpath rework by Vladislav Zolotarov
|
|
* Statistics and Link management by Yitchak Gertner
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/device.h> /* for dev_info() */
|
|
#include <linux/timer.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/byteorder.h>
|
|
#include <linux/time.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <net/ip.h>
|
|
#include <net/tcp.h>
|
|
#include <net/checksum.h>
|
|
#include <net/ip6_checksum.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/crc32c.h>
|
|
#include <linux/prefetch.h>
|
|
#include <linux/zlib.h>
|
|
#include <linux/io.h>
|
|
#include <linux/stringify.h>
|
|
|
|
#define BNX2X_MAIN
|
|
#include "bnx2x.h"
|
|
#include "bnx2x_init.h"
|
|
#include "bnx2x_init_ops.h"
|
|
#include "bnx2x_cmn.h"
|
|
|
|
|
|
#include <linux/firmware.h>
|
|
#include "bnx2x_fw_file_hdr.h"
|
|
/* FW files */
|
|
#define FW_FILE_VERSION \
|
|
__stringify(BCM_5710_FW_MAJOR_VERSION) "." \
|
|
__stringify(BCM_5710_FW_MINOR_VERSION) "." \
|
|
__stringify(BCM_5710_FW_REVISION_VERSION) "." \
|
|
__stringify(BCM_5710_FW_ENGINEERING_VERSION)
|
|
#define FW_FILE_NAME_E1 "bnx2x-e1-" FW_FILE_VERSION ".fw"
|
|
#define FW_FILE_NAME_E1H "bnx2x-e1h-" FW_FILE_VERSION ".fw"
|
|
|
|
/* Time in jiffies before concluding the transmitter is hung */
|
|
#define TX_TIMEOUT (5*HZ)
|
|
|
|
static char version[] __devinitdata =
|
|
"Broadcom NetXtreme II 5771x 10Gigabit Ethernet Driver "
|
|
DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
|
|
|
|
MODULE_AUTHOR("Eliezer Tamir");
|
|
MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710/57711/57711E Driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(DRV_MODULE_VERSION);
|
|
MODULE_FIRMWARE(FW_FILE_NAME_E1);
|
|
MODULE_FIRMWARE(FW_FILE_NAME_E1H);
|
|
|
|
static int multi_mode = 1;
|
|
module_param(multi_mode, int, 0);
|
|
MODULE_PARM_DESC(multi_mode, " Multi queue mode "
|
|
"(0 Disable; 1 Enable (default))");
|
|
|
|
static int num_queues;
|
|
module_param(num_queues, int, 0);
|
|
MODULE_PARM_DESC(num_queues, " Number of queues for multi_mode=1"
|
|
" (default is as a number of CPUs)");
|
|
|
|
static int disable_tpa;
|
|
module_param(disable_tpa, int, 0);
|
|
MODULE_PARM_DESC(disable_tpa, " Disable the TPA (LRO) feature");
|
|
|
|
static int int_mode;
|
|
module_param(int_mode, int, 0);
|
|
MODULE_PARM_DESC(int_mode, " Force interrupt mode other then MSI-X "
|
|
"(1 INT#x; 2 MSI)");
|
|
|
|
static int dropless_fc;
|
|
module_param(dropless_fc, int, 0);
|
|
MODULE_PARM_DESC(dropless_fc, " Pause on exhausted host ring");
|
|
|
|
static int poll;
|
|
module_param(poll, int, 0);
|
|
MODULE_PARM_DESC(poll, " Use polling (for debug)");
|
|
|
|
static int mrrs = -1;
|
|
module_param(mrrs, int, 0);
|
|
MODULE_PARM_DESC(mrrs, " Force Max Read Req Size (0..3) (for debug)");
|
|
|
|
static int debug;
|
|
module_param(debug, int, 0);
|
|
MODULE_PARM_DESC(debug, " Default debug msglevel");
|
|
|
|
static struct workqueue_struct *bnx2x_wq;
|
|
|
|
enum bnx2x_board_type {
|
|
BCM57710 = 0,
|
|
BCM57711 = 1,
|
|
BCM57711E = 2,
|
|
};
|
|
|
|
/* indexed by board_type, above */
|
|
static struct {
|
|
char *name;
|
|
} board_info[] __devinitdata = {
|
|
{ "Broadcom NetXtreme II BCM57710 XGb" },
|
|
{ "Broadcom NetXtreme II BCM57711 XGb" },
|
|
{ "Broadcom NetXtreme II BCM57711E XGb" }
|
|
};
|
|
|
|
|
|
static DEFINE_PCI_DEVICE_TABLE(bnx2x_pci_tbl) = {
|
|
{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57710), BCM57710 },
|
|
{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711), BCM57711 },
|
|
{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711E), BCM57711E },
|
|
{ 0 }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, bnx2x_pci_tbl);
|
|
|
|
/****************************************************************************
|
|
* General service functions
|
|
****************************************************************************/
|
|
|
|
/* used only at init
|
|
* locking is done by mcp
|
|
*/
|
|
void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val)
|
|
{
|
|
pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr);
|
|
pci_write_config_dword(bp->pdev, PCICFG_GRC_DATA, val);
|
|
pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
|
|
PCICFG_VENDOR_ID_OFFSET);
|
|
}
|
|
|
|
static u32 bnx2x_reg_rd_ind(struct bnx2x *bp, u32 addr)
|
|
{
|
|
u32 val;
|
|
|
|
pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr);
|
|
pci_read_config_dword(bp->pdev, PCICFG_GRC_DATA, &val);
|
|
pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
|
|
PCICFG_VENDOR_ID_OFFSET);
|
|
|
|
return val;
|
|
}
|
|
|
|
const u32 dmae_reg_go_c[] = {
|
|
DMAE_REG_GO_C0, DMAE_REG_GO_C1, DMAE_REG_GO_C2, DMAE_REG_GO_C3,
|
|
DMAE_REG_GO_C4, DMAE_REG_GO_C5, DMAE_REG_GO_C6, DMAE_REG_GO_C7,
|
|
DMAE_REG_GO_C8, DMAE_REG_GO_C9, DMAE_REG_GO_C10, DMAE_REG_GO_C11,
|
|
DMAE_REG_GO_C12, DMAE_REG_GO_C13, DMAE_REG_GO_C14, DMAE_REG_GO_C15
|
|
};
|
|
|
|
/* copy command into DMAE command memory and set DMAE command go */
|
|
void bnx2x_post_dmae(struct bnx2x *bp, struct dmae_command *dmae, int idx)
|
|
{
|
|
u32 cmd_offset;
|
|
int i;
|
|
|
|
cmd_offset = (DMAE_REG_CMD_MEM + sizeof(struct dmae_command) * idx);
|
|
for (i = 0; i < (sizeof(struct dmae_command)/4); i++) {
|
|
REG_WR(bp, cmd_offset + i*4, *(((u32 *)dmae) + i));
|
|
|
|
DP(BNX2X_MSG_OFF, "DMAE cmd[%d].%d (0x%08x) : 0x%08x\n",
|
|
idx, i, cmd_offset + i*4, *(((u32 *)dmae) + i));
|
|
}
|
|
REG_WR(bp, dmae_reg_go_c[idx], 1);
|
|
}
|
|
|
|
void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
|
|
u32 len32)
|
|
{
|
|
struct dmae_command dmae;
|
|
u32 *wb_comp = bnx2x_sp(bp, wb_comp);
|
|
int cnt = 200;
|
|
|
|
if (!bp->dmae_ready) {
|
|
u32 *data = bnx2x_sp(bp, wb_data[0]);
|
|
|
|
DP(BNX2X_MSG_OFF, "DMAE is not ready (dst_addr %08x len32 %d)"
|
|
" using indirect\n", dst_addr, len32);
|
|
bnx2x_init_ind_wr(bp, dst_addr, data, len32);
|
|
return;
|
|
}
|
|
|
|
memset(&dmae, 0, sizeof(struct dmae_command));
|
|
|
|
dmae.opcode = (DMAE_CMD_SRC_PCI | DMAE_CMD_DST_GRC |
|
|
DMAE_CMD_C_DST_PCI | DMAE_CMD_C_ENABLE |
|
|
DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET |
|
|
#ifdef __BIG_ENDIAN
|
|
DMAE_CMD_ENDIANITY_B_DW_SWAP |
|
|
#else
|
|
DMAE_CMD_ENDIANITY_DW_SWAP |
|
|
#endif
|
|
(BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0) |
|
|
(BP_E1HVN(bp) << DMAE_CMD_E1HVN_SHIFT));
|
|
dmae.src_addr_lo = U64_LO(dma_addr);
|
|
dmae.src_addr_hi = U64_HI(dma_addr);
|
|
dmae.dst_addr_lo = dst_addr >> 2;
|
|
dmae.dst_addr_hi = 0;
|
|
dmae.len = len32;
|
|
dmae.comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_comp));
|
|
dmae.comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_comp));
|
|
dmae.comp_val = DMAE_COMP_VAL;
|
|
|
|
DP(BNX2X_MSG_OFF, "DMAE: opcode 0x%08x\n"
|
|
DP_LEVEL "src_addr [%x:%08x] len [%d *4] "
|
|
"dst_addr [%x:%08x (%08x)]\n"
|
|
DP_LEVEL "comp_addr [%x:%08x] comp_val 0x%08x\n",
|
|
dmae.opcode, dmae.src_addr_hi, dmae.src_addr_lo,
|
|
dmae.len, dmae.dst_addr_hi, dmae.dst_addr_lo, dst_addr,
|
|
dmae.comp_addr_hi, dmae.comp_addr_lo, dmae.comp_val);
|
|
DP(BNX2X_MSG_OFF, "data [0x%08x 0x%08x 0x%08x 0x%08x]\n",
|
|
bp->slowpath->wb_data[0], bp->slowpath->wb_data[1],
|
|
bp->slowpath->wb_data[2], bp->slowpath->wb_data[3]);
|
|
|
|
mutex_lock(&bp->dmae_mutex);
|
|
|
|
*wb_comp = 0;
|
|
|
|
bnx2x_post_dmae(bp, &dmae, INIT_DMAE_C(bp));
|
|
|
|
udelay(5);
|
|
|
|
while (*wb_comp != DMAE_COMP_VAL) {
|
|
DP(BNX2X_MSG_OFF, "wb_comp 0x%08x\n", *wb_comp);
|
|
|
|
if (!cnt) {
|
|
BNX2X_ERR("DMAE timeout!\n");
|
|
break;
|
|
}
|
|
cnt--;
|
|
/* adjust delay for emulation/FPGA */
|
|
if (CHIP_REV_IS_SLOW(bp))
|
|
msleep(100);
|
|
else
|
|
udelay(5);
|
|
}
|
|
|
|
mutex_unlock(&bp->dmae_mutex);
|
|
}
|
|
|
|
void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
|
|
{
|
|
struct dmae_command dmae;
|
|
u32 *wb_comp = bnx2x_sp(bp, wb_comp);
|
|
int cnt = 200;
|
|
|
|
if (!bp->dmae_ready) {
|
|
u32 *data = bnx2x_sp(bp, wb_data[0]);
|
|
int i;
|
|
|
|
DP(BNX2X_MSG_OFF, "DMAE is not ready (src_addr %08x len32 %d)"
|
|
" using indirect\n", src_addr, len32);
|
|
for (i = 0; i < len32; i++)
|
|
data[i] = bnx2x_reg_rd_ind(bp, src_addr + i*4);
|
|
return;
|
|
}
|
|
|
|
memset(&dmae, 0, sizeof(struct dmae_command));
|
|
|
|
dmae.opcode = (DMAE_CMD_SRC_GRC | DMAE_CMD_DST_PCI |
|
|
DMAE_CMD_C_DST_PCI | DMAE_CMD_C_ENABLE |
|
|
DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET |
|
|
#ifdef __BIG_ENDIAN
|
|
DMAE_CMD_ENDIANITY_B_DW_SWAP |
|
|
#else
|
|
DMAE_CMD_ENDIANITY_DW_SWAP |
|
|
#endif
|
|
(BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0) |
|
|
(BP_E1HVN(bp) << DMAE_CMD_E1HVN_SHIFT));
|
|
dmae.src_addr_lo = src_addr >> 2;
|
|
dmae.src_addr_hi = 0;
|
|
dmae.dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_data));
|
|
dmae.dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_data));
|
|
dmae.len = len32;
|
|
dmae.comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_comp));
|
|
dmae.comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_comp));
|
|
dmae.comp_val = DMAE_COMP_VAL;
|
|
|
|
DP(BNX2X_MSG_OFF, "DMAE: opcode 0x%08x\n"
|
|
DP_LEVEL "src_addr [%x:%08x] len [%d *4] "
|
|
"dst_addr [%x:%08x (%08x)]\n"
|
|
DP_LEVEL "comp_addr [%x:%08x] comp_val 0x%08x\n",
|
|
dmae.opcode, dmae.src_addr_hi, dmae.src_addr_lo,
|
|
dmae.len, dmae.dst_addr_hi, dmae.dst_addr_lo, src_addr,
|
|
dmae.comp_addr_hi, dmae.comp_addr_lo, dmae.comp_val);
|
|
|
|
mutex_lock(&bp->dmae_mutex);
|
|
|
|
memset(bnx2x_sp(bp, wb_data[0]), 0, sizeof(u32) * 4);
|
|
*wb_comp = 0;
|
|
|
|
bnx2x_post_dmae(bp, &dmae, INIT_DMAE_C(bp));
|
|
|
|
udelay(5);
|
|
|
|
while (*wb_comp != DMAE_COMP_VAL) {
|
|
|
|
if (!cnt) {
|
|
BNX2X_ERR("DMAE timeout!\n");
|
|
break;
|
|
}
|
|
cnt--;
|
|
/* adjust delay for emulation/FPGA */
|
|
if (CHIP_REV_IS_SLOW(bp))
|
|
msleep(100);
|
|
else
|
|
udelay(5);
|
|
}
|
|
DP(BNX2X_MSG_OFF, "data [0x%08x 0x%08x 0x%08x 0x%08x]\n",
|
|
bp->slowpath->wb_data[0], bp->slowpath->wb_data[1],
|
|
bp->slowpath->wb_data[2], bp->slowpath->wb_data[3]);
|
|
|
|
mutex_unlock(&bp->dmae_mutex);
|
|
}
|
|
|
|
void bnx2x_write_dmae_phys_len(struct bnx2x *bp, dma_addr_t phys_addr,
|
|
u32 addr, u32 len)
|
|
{
|
|
int dmae_wr_max = DMAE_LEN32_WR_MAX(bp);
|
|
int offset = 0;
|
|
|
|
while (len > dmae_wr_max) {
|
|
bnx2x_write_dmae(bp, phys_addr + offset,
|
|
addr + offset, dmae_wr_max);
|
|
offset += dmae_wr_max * 4;
|
|
len -= dmae_wr_max;
|
|
}
|
|
|
|
bnx2x_write_dmae(bp, phys_addr + offset, addr + offset, len);
|
|
}
|
|
|
|
/* used only for slowpath so not inlined */
|
|
static void bnx2x_wb_wr(struct bnx2x *bp, int reg, u32 val_hi, u32 val_lo)
|
|
{
|
|
u32 wb_write[2];
|
|
|
|
wb_write[0] = val_hi;
|
|
wb_write[1] = val_lo;
|
|
REG_WR_DMAE(bp, reg, wb_write, 2);
|
|
}
|
|
|
|
#ifdef USE_WB_RD
|
|
static u64 bnx2x_wb_rd(struct bnx2x *bp, int reg)
|
|
{
|
|
u32 wb_data[2];
|
|
|
|
REG_RD_DMAE(bp, reg, wb_data, 2);
|
|
|
|
return HILO_U64(wb_data[0], wb_data[1]);
|
|
}
|
|
#endif
|
|
|
|
static int bnx2x_mc_assert(struct bnx2x *bp)
|
|
{
|
|
char last_idx;
|
|
int i, rc = 0;
|
|
u32 row0, row1, row2, row3;
|
|
|
|
/* XSTORM */
|
|
last_idx = REG_RD8(bp, BAR_XSTRORM_INTMEM +
|
|
XSTORM_ASSERT_LIST_INDEX_OFFSET);
|
|
if (last_idx)
|
|
BNX2X_ERR("XSTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx);
|
|
|
|
/* print the asserts */
|
|
for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) {
|
|
|
|
row0 = REG_RD(bp, BAR_XSTRORM_INTMEM +
|
|
XSTORM_ASSERT_LIST_OFFSET(i));
|
|
row1 = REG_RD(bp, BAR_XSTRORM_INTMEM +
|
|
XSTORM_ASSERT_LIST_OFFSET(i) + 4);
|
|
row2 = REG_RD(bp, BAR_XSTRORM_INTMEM +
|
|
XSTORM_ASSERT_LIST_OFFSET(i) + 8);
|
|
row3 = REG_RD(bp, BAR_XSTRORM_INTMEM +
|
|
XSTORM_ASSERT_LIST_OFFSET(i) + 12);
|
|
|
|
if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
|
|
BNX2X_ERR("XSTORM_ASSERT_INDEX 0x%x = 0x%08x"
|
|
" 0x%08x 0x%08x 0x%08x\n",
|
|
i, row3, row2, row1, row0);
|
|
rc++;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* TSTORM */
|
|
last_idx = REG_RD8(bp, BAR_TSTRORM_INTMEM +
|
|
TSTORM_ASSERT_LIST_INDEX_OFFSET);
|
|
if (last_idx)
|
|
BNX2X_ERR("TSTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx);
|
|
|
|
/* print the asserts */
|
|
for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) {
|
|
|
|
row0 = REG_RD(bp, BAR_TSTRORM_INTMEM +
|
|
TSTORM_ASSERT_LIST_OFFSET(i));
|
|
row1 = REG_RD(bp, BAR_TSTRORM_INTMEM +
|
|
TSTORM_ASSERT_LIST_OFFSET(i) + 4);
|
|
row2 = REG_RD(bp, BAR_TSTRORM_INTMEM +
|
|
TSTORM_ASSERT_LIST_OFFSET(i) + 8);
|
|
row3 = REG_RD(bp, BAR_TSTRORM_INTMEM +
|
|
TSTORM_ASSERT_LIST_OFFSET(i) + 12);
|
|
|
|
if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
|
|
BNX2X_ERR("TSTORM_ASSERT_INDEX 0x%x = 0x%08x"
|
|
" 0x%08x 0x%08x 0x%08x\n",
|
|
i, row3, row2, row1, row0);
|
|
rc++;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* CSTORM */
|
|
last_idx = REG_RD8(bp, BAR_CSTRORM_INTMEM +
|
|
CSTORM_ASSERT_LIST_INDEX_OFFSET);
|
|
if (last_idx)
|
|
BNX2X_ERR("CSTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx);
|
|
|
|
/* print the asserts */
|
|
for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) {
|
|
|
|
row0 = REG_RD(bp, BAR_CSTRORM_INTMEM +
|
|
CSTORM_ASSERT_LIST_OFFSET(i));
|
|
row1 = REG_RD(bp, BAR_CSTRORM_INTMEM +
|
|
CSTORM_ASSERT_LIST_OFFSET(i) + 4);
|
|
row2 = REG_RD(bp, BAR_CSTRORM_INTMEM +
|
|
CSTORM_ASSERT_LIST_OFFSET(i) + 8);
|
|
row3 = REG_RD(bp, BAR_CSTRORM_INTMEM +
|
|
CSTORM_ASSERT_LIST_OFFSET(i) + 12);
|
|
|
|
if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
|
|
BNX2X_ERR("CSTORM_ASSERT_INDEX 0x%x = 0x%08x"
|
|
" 0x%08x 0x%08x 0x%08x\n",
|
|
i, row3, row2, row1, row0);
|
|
rc++;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* USTORM */
|
|
last_idx = REG_RD8(bp, BAR_USTRORM_INTMEM +
|
|
USTORM_ASSERT_LIST_INDEX_OFFSET);
|
|
if (last_idx)
|
|
BNX2X_ERR("USTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx);
|
|
|
|
/* print the asserts */
|
|
for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) {
|
|
|
|
row0 = REG_RD(bp, BAR_USTRORM_INTMEM +
|
|
USTORM_ASSERT_LIST_OFFSET(i));
|
|
row1 = REG_RD(bp, BAR_USTRORM_INTMEM +
|
|
USTORM_ASSERT_LIST_OFFSET(i) + 4);
|
|
row2 = REG_RD(bp, BAR_USTRORM_INTMEM +
|
|
USTORM_ASSERT_LIST_OFFSET(i) + 8);
|
|
row3 = REG_RD(bp, BAR_USTRORM_INTMEM +
|
|
USTORM_ASSERT_LIST_OFFSET(i) + 12);
|
|
|
|
if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
|
|
BNX2X_ERR("USTORM_ASSERT_INDEX 0x%x = 0x%08x"
|
|
" 0x%08x 0x%08x 0x%08x\n",
|
|
i, row3, row2, row1, row0);
|
|
rc++;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void bnx2x_fw_dump(struct bnx2x *bp)
|
|
{
|
|
u32 addr;
|
|
u32 mark, offset;
|
|
__be32 data[9];
|
|
int word;
|
|
|
|
if (BP_NOMCP(bp)) {
|
|
BNX2X_ERR("NO MCP - can not dump\n");
|
|
return;
|
|
}
|
|
|
|
addr = bp->common.shmem_base - 0x0800 + 4;
|
|
mark = REG_RD(bp, addr);
|
|
mark = MCP_REG_MCPR_SCRATCH + ((mark + 0x3) & ~0x3) - 0x08000000;
|
|
pr_err("begin fw dump (mark 0x%x)\n", mark);
|
|
|
|
pr_err("");
|
|
for (offset = mark; offset <= bp->common.shmem_base; offset += 0x8*4) {
|
|
for (word = 0; word < 8; word++)
|
|
data[word] = htonl(REG_RD(bp, offset + 4*word));
|
|
data[8] = 0x0;
|
|
pr_cont("%s", (char *)data);
|
|
}
|
|
for (offset = addr + 4; offset <= mark; offset += 0x8*4) {
|
|
for (word = 0; word < 8; word++)
|
|
data[word] = htonl(REG_RD(bp, offset + 4*word));
|
|
data[8] = 0x0;
|
|
pr_cont("%s", (char *)data);
|
|
}
|
|
pr_err("end of fw dump\n");
|
|
}
|
|
|
|
void bnx2x_panic_dump(struct bnx2x *bp)
|
|
{
|
|
int i;
|
|
u16 j, start, end;
|
|
|
|
bp->stats_state = STATS_STATE_DISABLED;
|
|
DP(BNX2X_MSG_STATS, "stats_state - DISABLED\n");
|
|
|
|
BNX2X_ERR("begin crash dump -----------------\n");
|
|
|
|
/* Indices */
|
|
/* Common */
|
|
BNX2X_ERR("def_c_idx(0x%x) def_u_idx(0x%x) def_x_idx(0x%x)"
|
|
" def_t_idx(0x%x) def_att_idx(0x%x) attn_state(0x%x)"
|
|
" spq_prod_idx(0x%x)\n",
|
|
bp->def_c_idx, bp->def_u_idx, bp->def_x_idx, bp->def_t_idx,
|
|
bp->def_att_idx, bp->attn_state, bp->spq_prod_idx);
|
|
|
|
/* Rx */
|
|
for_each_queue(bp, i) {
|
|
struct bnx2x_fastpath *fp = &bp->fp[i];
|
|
|
|
BNX2X_ERR("fp%d: rx_bd_prod(0x%x) rx_bd_cons(0x%x)"
|
|
" *rx_bd_cons_sb(0x%x) rx_comp_prod(0x%x)"
|
|
" rx_comp_cons(0x%x) *rx_cons_sb(0x%x)\n",
|
|
i, fp->rx_bd_prod, fp->rx_bd_cons,
|
|
le16_to_cpu(*fp->rx_bd_cons_sb), fp->rx_comp_prod,
|
|
fp->rx_comp_cons, le16_to_cpu(*fp->rx_cons_sb));
|
|
BNX2X_ERR(" rx_sge_prod(0x%x) last_max_sge(0x%x)"
|
|
" fp_u_idx(0x%x) *sb_u_idx(0x%x)\n",
|
|
fp->rx_sge_prod, fp->last_max_sge,
|
|
le16_to_cpu(fp->fp_u_idx),
|
|
fp->status_blk->u_status_block.status_block_index);
|
|
}
|
|
|
|
/* Tx */
|
|
for_each_queue(bp, i) {
|
|
struct bnx2x_fastpath *fp = &bp->fp[i];
|
|
|
|
BNX2X_ERR("fp%d: tx_pkt_prod(0x%x) tx_pkt_cons(0x%x)"
|
|
" tx_bd_prod(0x%x) tx_bd_cons(0x%x)"
|
|
" *tx_cons_sb(0x%x)\n",
|
|
i, fp->tx_pkt_prod, fp->tx_pkt_cons, fp->tx_bd_prod,
|
|
fp->tx_bd_cons, le16_to_cpu(*fp->tx_cons_sb));
|
|
BNX2X_ERR(" fp_c_idx(0x%x) *sb_c_idx(0x%x)"
|
|
" tx_db_prod(0x%x)\n", le16_to_cpu(fp->fp_c_idx),
|
|
fp->status_blk->c_status_block.status_block_index,
|
|
fp->tx_db.data.prod);
|
|
}
|
|
|
|
/* Rings */
|
|
/* Rx */
|
|
for_each_queue(bp, i) {
|
|
struct bnx2x_fastpath *fp = &bp->fp[i];
|
|
|
|
start = RX_BD(le16_to_cpu(*fp->rx_cons_sb) - 10);
|
|
end = RX_BD(le16_to_cpu(*fp->rx_cons_sb) + 503);
|
|
for (j = start; j != end; j = RX_BD(j + 1)) {
|
|
u32 *rx_bd = (u32 *)&fp->rx_desc_ring[j];
|
|
struct sw_rx_bd *sw_bd = &fp->rx_buf_ring[j];
|
|
|
|
BNX2X_ERR("fp%d: rx_bd[%x]=[%x:%x] sw_bd=[%p]\n",
|
|
i, j, rx_bd[1], rx_bd[0], sw_bd->skb);
|
|
}
|
|
|
|
start = RX_SGE(fp->rx_sge_prod);
|
|
end = RX_SGE(fp->last_max_sge);
|
|
for (j = start; j != end; j = RX_SGE(j + 1)) {
|
|
u32 *rx_sge = (u32 *)&fp->rx_sge_ring[j];
|
|
struct sw_rx_page *sw_page = &fp->rx_page_ring[j];
|
|
|
|
BNX2X_ERR("fp%d: rx_sge[%x]=[%x:%x] sw_page=[%p]\n",
|
|
i, j, rx_sge[1], rx_sge[0], sw_page->page);
|
|
}
|
|
|
|
start = RCQ_BD(fp->rx_comp_cons - 10);
|
|
end = RCQ_BD(fp->rx_comp_cons + 503);
|
|
for (j = start; j != end; j = RCQ_BD(j + 1)) {
|
|
u32 *cqe = (u32 *)&fp->rx_comp_ring[j];
|
|
|
|
BNX2X_ERR("fp%d: cqe[%x]=[%x:%x:%x:%x]\n",
|
|
i, j, cqe[0], cqe[1], cqe[2], cqe[3]);
|
|
}
|
|
}
|
|
|
|
/* Tx */
|
|
for_each_queue(bp, i) {
|
|
struct bnx2x_fastpath *fp = &bp->fp[i];
|
|
|
|
start = TX_BD(le16_to_cpu(*fp->tx_cons_sb) - 10);
|
|
end = TX_BD(le16_to_cpu(*fp->tx_cons_sb) + 245);
|
|
for (j = start; j != end; j = TX_BD(j + 1)) {
|
|
struct sw_tx_bd *sw_bd = &fp->tx_buf_ring[j];
|
|
|
|
BNX2X_ERR("fp%d: packet[%x]=[%p,%x]\n",
|
|
i, j, sw_bd->skb, sw_bd->first_bd);
|
|
}
|
|
|
|
start = TX_BD(fp->tx_bd_cons - 10);
|
|
end = TX_BD(fp->tx_bd_cons + 254);
|
|
for (j = start; j != end; j = TX_BD(j + 1)) {
|
|
u32 *tx_bd = (u32 *)&fp->tx_desc_ring[j];
|
|
|
|
BNX2X_ERR("fp%d: tx_bd[%x]=[%x:%x:%x:%x]\n",
|
|
i, j, tx_bd[0], tx_bd[1], tx_bd[2], tx_bd[3]);
|
|
}
|
|
}
|
|
|
|
bnx2x_fw_dump(bp);
|
|
bnx2x_mc_assert(bp);
|
|
BNX2X_ERR("end crash dump -----------------\n");
|
|
}
|
|
|
|
void bnx2x_int_enable(struct bnx2x *bp)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
|
|
u32 val = REG_RD(bp, addr);
|
|
int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0;
|
|
int msi = (bp->flags & USING_MSI_FLAG) ? 1 : 0;
|
|
|
|
if (msix) {
|
|
val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
|
|
HC_CONFIG_0_REG_INT_LINE_EN_0);
|
|
val |= (HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
|
|
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
|
|
} else if (msi) {
|
|
val &= ~HC_CONFIG_0_REG_INT_LINE_EN_0;
|
|
val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
|
|
HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
|
|
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
|
|
} else {
|
|
val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
|
|
HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
|
|
HC_CONFIG_0_REG_INT_LINE_EN_0 |
|
|
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
|
|
|
|
DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x)\n",
|
|
val, port, addr);
|
|
|
|
REG_WR(bp, addr, val);
|
|
|
|
val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0;
|
|
}
|
|
|
|
DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x) mode %s\n",
|
|
val, port, addr, (msix ? "MSI-X" : (msi ? "MSI" : "INTx")));
|
|
|
|
REG_WR(bp, addr, val);
|
|
/*
|
|
* Ensure that HC_CONFIG is written before leading/trailing edge config
|
|
*/
|
|
mmiowb();
|
|
barrier();
|
|
|
|
if (CHIP_IS_E1H(bp)) {
|
|
/* init leading/trailing edge */
|
|
if (IS_E1HMF(bp)) {
|
|
val = (0xee0f | (1 << (BP_E1HVN(bp) + 4)));
|
|
if (bp->port.pmf)
|
|
/* enable nig and gpio3 attention */
|
|
val |= 0x1100;
|
|
} else
|
|
val = 0xffff;
|
|
|
|
REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val);
|
|
REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val);
|
|
}
|
|
|
|
/* Make sure that interrupts are indeed enabled from here on */
|
|
mmiowb();
|
|
}
|
|
|
|
static void bnx2x_int_disable(struct bnx2x *bp)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
|
|
u32 val = REG_RD(bp, addr);
|
|
|
|
val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
|
|
HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
|
|
HC_CONFIG_0_REG_INT_LINE_EN_0 |
|
|
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
|
|
|
|
DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x)\n",
|
|
val, port, addr);
|
|
|
|
/* flush all outstanding writes */
|
|
mmiowb();
|
|
|
|
REG_WR(bp, addr, val);
|
|
if (REG_RD(bp, addr) != val)
|
|
BNX2X_ERR("BUG! proper val not read from IGU!\n");
|
|
}
|
|
|
|
void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw)
|
|
{
|
|
int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0;
|
|
int i, offset;
|
|
|
|
/* disable interrupt handling */
|
|
atomic_inc(&bp->intr_sem);
|
|
smp_wmb(); /* Ensure that bp->intr_sem update is SMP-safe */
|
|
|
|
if (disable_hw)
|
|
/* prevent the HW from sending interrupts */
|
|
bnx2x_int_disable(bp);
|
|
|
|
/* make sure all ISRs are done */
|
|
if (msix) {
|
|
synchronize_irq(bp->msix_table[0].vector);
|
|
offset = 1;
|
|
#ifdef BCM_CNIC
|
|
offset++;
|
|
#endif
|
|
for_each_queue(bp, i)
|
|
synchronize_irq(bp->msix_table[i + offset].vector);
|
|
} else
|
|
synchronize_irq(bp->pdev->irq);
|
|
|
|
/* make sure sp_task is not running */
|
|
cancel_delayed_work(&bp->sp_task);
|
|
flush_workqueue(bnx2x_wq);
|
|
}
|
|
|
|
/* fast path */
|
|
|
|
/*
|
|
* General service functions
|
|
*/
|
|
|
|
/* Return true if succeeded to acquire the lock */
|
|
static bool bnx2x_trylock_hw_lock(struct bnx2x *bp, u32 resource)
|
|
{
|
|
u32 lock_status;
|
|
u32 resource_bit = (1 << resource);
|
|
int func = BP_FUNC(bp);
|
|
u32 hw_lock_control_reg;
|
|
|
|
DP(NETIF_MSG_HW, "Trying to take a lock on resource %d\n", resource);
|
|
|
|
/* Validating that the resource is within range */
|
|
if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
|
|
DP(NETIF_MSG_HW,
|
|
"resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
|
|
resource, HW_LOCK_MAX_RESOURCE_VALUE);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (func <= 5)
|
|
hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
|
|
else
|
|
hw_lock_control_reg =
|
|
(MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
|
|
|
|
/* Try to acquire the lock */
|
|
REG_WR(bp, hw_lock_control_reg + 4, resource_bit);
|
|
lock_status = REG_RD(bp, hw_lock_control_reg);
|
|
if (lock_status & resource_bit)
|
|
return true;
|
|
|
|
DP(NETIF_MSG_HW, "Failed to get a lock on resource %d\n", resource);
|
|
return false;
|
|
}
|
|
|
|
|
|
#ifdef BCM_CNIC
|
|
static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid);
|
|
#endif
|
|
|
|
void bnx2x_sp_event(struct bnx2x_fastpath *fp,
|
|
union eth_rx_cqe *rr_cqe)
|
|
{
|
|
struct bnx2x *bp = fp->bp;
|
|
int cid = SW_CID(rr_cqe->ramrod_cqe.conn_and_cmd_data);
|
|
int command = CQE_CMD(rr_cqe->ramrod_cqe.conn_and_cmd_data);
|
|
|
|
DP(BNX2X_MSG_SP,
|
|
"fp %d cid %d got ramrod #%d state is %x type is %d\n",
|
|
fp->index, cid, command, bp->state,
|
|
rr_cqe->ramrod_cqe.ramrod_type);
|
|
|
|
bp->spq_left++;
|
|
|
|
if (fp->index) {
|
|
switch (command | fp->state) {
|
|
case (RAMROD_CMD_ID_ETH_CLIENT_SETUP |
|
|
BNX2X_FP_STATE_OPENING):
|
|
DP(NETIF_MSG_IFUP, "got MULTI[%d] setup ramrod\n",
|
|
cid);
|
|
fp->state = BNX2X_FP_STATE_OPEN;
|
|
break;
|
|
|
|
case (RAMROD_CMD_ID_ETH_HALT | BNX2X_FP_STATE_HALTING):
|
|
DP(NETIF_MSG_IFDOWN, "got MULTI[%d] halt ramrod\n",
|
|
cid);
|
|
fp->state = BNX2X_FP_STATE_HALTED;
|
|
break;
|
|
|
|
default:
|
|
BNX2X_ERR("unexpected MC reply (%d) "
|
|
"fp[%d] state is %x\n",
|
|
command, fp->index, fp->state);
|
|
break;
|
|
}
|
|
mb(); /* force bnx2x_wait_ramrod() to see the change */
|
|
return;
|
|
}
|
|
|
|
switch (command | bp->state) {
|
|
case (RAMROD_CMD_ID_ETH_PORT_SETUP | BNX2X_STATE_OPENING_WAIT4_PORT):
|
|
DP(NETIF_MSG_IFUP, "got setup ramrod\n");
|
|
bp->state = BNX2X_STATE_OPEN;
|
|
break;
|
|
|
|
case (RAMROD_CMD_ID_ETH_HALT | BNX2X_STATE_CLOSING_WAIT4_HALT):
|
|
DP(NETIF_MSG_IFDOWN, "got halt ramrod\n");
|
|
bp->state = BNX2X_STATE_CLOSING_WAIT4_DELETE;
|
|
fp->state = BNX2X_FP_STATE_HALTED;
|
|
break;
|
|
|
|
case (RAMROD_CMD_ID_ETH_CFC_DEL | BNX2X_STATE_CLOSING_WAIT4_HALT):
|
|
DP(NETIF_MSG_IFDOWN, "got delete ramrod for MULTI[%d]\n", cid);
|
|
bnx2x_fp(bp, cid, state) = BNX2X_FP_STATE_CLOSED;
|
|
break;
|
|
|
|
#ifdef BCM_CNIC
|
|
case (RAMROD_CMD_ID_ETH_CFC_DEL | BNX2X_STATE_OPEN):
|
|
DP(NETIF_MSG_IFDOWN, "got delete ramrod for CID %d\n", cid);
|
|
bnx2x_cnic_cfc_comp(bp, cid);
|
|
break;
|
|
#endif
|
|
|
|
case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_OPEN):
|
|
case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_DIAG):
|
|
DP(NETIF_MSG_IFUP, "got set mac ramrod\n");
|
|
bp->set_mac_pending--;
|
|
smp_wmb();
|
|
break;
|
|
|
|
case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_CLOSING_WAIT4_HALT):
|
|
DP(NETIF_MSG_IFDOWN, "got (un)set mac ramrod\n");
|
|
bp->set_mac_pending--;
|
|
smp_wmb();
|
|
break;
|
|
|
|
default:
|
|
BNX2X_ERR("unexpected MC reply (%d) bp->state is %x\n",
|
|
command, bp->state);
|
|
break;
|
|
}
|
|
mb(); /* force bnx2x_wait_ramrod() to see the change */
|
|
}
|
|
|
|
irqreturn_t bnx2x_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev_instance);
|
|
u16 status = bnx2x_ack_int(bp);
|
|
u16 mask;
|
|
int i;
|
|
|
|
/* Return here if interrupt is shared and it's not for us */
|
|
if (unlikely(status == 0)) {
|
|
DP(NETIF_MSG_INTR, "not our interrupt!\n");
|
|
return IRQ_NONE;
|
|
}
|
|
DP(NETIF_MSG_INTR, "got an interrupt status 0x%x\n", status);
|
|
|
|
/* Return here if interrupt is disabled */
|
|
if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
|
|
DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#ifdef BNX2X_STOP_ON_ERROR
|
|
if (unlikely(bp->panic))
|
|
return IRQ_HANDLED;
|
|
#endif
|
|
|
|
for (i = 0; i < BNX2X_NUM_QUEUES(bp); i++) {
|
|
struct bnx2x_fastpath *fp = &bp->fp[i];
|
|
|
|
mask = 0x2 << fp->sb_id;
|
|
if (status & mask) {
|
|
/* Handle Rx and Tx according to SB id */
|
|
prefetch(fp->rx_cons_sb);
|
|
prefetch(&fp->status_blk->u_status_block.
|
|
status_block_index);
|
|
prefetch(fp->tx_cons_sb);
|
|
prefetch(&fp->status_blk->c_status_block.
|
|
status_block_index);
|
|
napi_schedule(&bnx2x_fp(bp, fp->index, napi));
|
|
status &= ~mask;
|
|
}
|
|
}
|
|
|
|
#ifdef BCM_CNIC
|
|
mask = 0x2 << CNIC_SB_ID(bp);
|
|
if (status & (mask | 0x1)) {
|
|
struct cnic_ops *c_ops = NULL;
|
|
|
|
rcu_read_lock();
|
|
c_ops = rcu_dereference(bp->cnic_ops);
|
|
if (c_ops)
|
|
c_ops->cnic_handler(bp->cnic_data, NULL);
|
|
rcu_read_unlock();
|
|
|
|
status &= ~mask;
|
|
}
|
|
#endif
|
|
|
|
if (unlikely(status & 0x1)) {
|
|
queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);
|
|
|
|
status &= ~0x1;
|
|
if (!status)
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (unlikely(status))
|
|
DP(NETIF_MSG_INTR, "got an unknown interrupt! (status 0x%x)\n",
|
|
status);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* end of fast path */
|
|
|
|
|
|
/* Link */
|
|
|
|
/*
|
|
* General service functions
|
|
*/
|
|
|
|
int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource)
|
|
{
|
|
u32 lock_status;
|
|
u32 resource_bit = (1 << resource);
|
|
int func = BP_FUNC(bp);
|
|
u32 hw_lock_control_reg;
|
|
int cnt;
|
|
|
|
/* Validating that the resource is within range */
|
|
if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
|
|
DP(NETIF_MSG_HW,
|
|
"resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
|
|
resource, HW_LOCK_MAX_RESOURCE_VALUE);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (func <= 5) {
|
|
hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
|
|
} else {
|
|
hw_lock_control_reg =
|
|
(MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
|
|
}
|
|
|
|
/* Validating that the resource is not already taken */
|
|
lock_status = REG_RD(bp, hw_lock_control_reg);
|
|
if (lock_status & resource_bit) {
|
|
DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n",
|
|
lock_status, resource_bit);
|
|
return -EEXIST;
|
|
}
|
|
|
|
/* Try for 5 second every 5ms */
|
|
for (cnt = 0; cnt < 1000; cnt++) {
|
|
/* Try to acquire the lock */
|
|
REG_WR(bp, hw_lock_control_reg + 4, resource_bit);
|
|
lock_status = REG_RD(bp, hw_lock_control_reg);
|
|
if (lock_status & resource_bit)
|
|
return 0;
|
|
|
|
msleep(5);
|
|
}
|
|
DP(NETIF_MSG_HW, "Timeout\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource)
|
|
{
|
|
u32 lock_status;
|
|
u32 resource_bit = (1 << resource);
|
|
int func = BP_FUNC(bp);
|
|
u32 hw_lock_control_reg;
|
|
|
|
DP(NETIF_MSG_HW, "Releasing a lock on resource %d\n", resource);
|
|
|
|
/* Validating that the resource is within range */
|
|
if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
|
|
DP(NETIF_MSG_HW,
|
|
"resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
|
|
resource, HW_LOCK_MAX_RESOURCE_VALUE);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (func <= 5) {
|
|
hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
|
|
} else {
|
|
hw_lock_control_reg =
|
|
(MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
|
|
}
|
|
|
|
/* Validating that the resource is currently taken */
|
|
lock_status = REG_RD(bp, hw_lock_control_reg);
|
|
if (!(lock_status & resource_bit)) {
|
|
DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n",
|
|
lock_status, resource_bit);
|
|
return -EFAULT;
|
|
}
|
|
|
|
REG_WR(bp, hw_lock_control_reg, resource_bit);
|
|
return 0;
|
|
}
|
|
|
|
|
|
int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port)
|
|
{
|
|
/* The GPIO should be swapped if swap register is set and active */
|
|
int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
|
|
REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port;
|
|
int gpio_shift = gpio_num +
|
|
(gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
|
|
u32 gpio_mask = (1 << gpio_shift);
|
|
u32 gpio_reg;
|
|
int value;
|
|
|
|
if (gpio_num > MISC_REGISTERS_GPIO_3) {
|
|
BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* read GPIO value */
|
|
gpio_reg = REG_RD(bp, MISC_REG_GPIO);
|
|
|
|
/* get the requested pin value */
|
|
if ((gpio_reg & gpio_mask) == gpio_mask)
|
|
value = 1;
|
|
else
|
|
value = 0;
|
|
|
|
DP(NETIF_MSG_LINK, "pin %d value 0x%x\n", gpio_num, value);
|
|
|
|
return value;
|
|
}
|
|
|
|
int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port)
|
|
{
|
|
/* The GPIO should be swapped if swap register is set and active */
|
|
int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
|
|
REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port;
|
|
int gpio_shift = gpio_num +
|
|
(gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
|
|
u32 gpio_mask = (1 << gpio_shift);
|
|
u32 gpio_reg;
|
|
|
|
if (gpio_num > MISC_REGISTERS_GPIO_3) {
|
|
BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
|
|
return -EINVAL;
|
|
}
|
|
|
|
bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
|
|
/* read GPIO and mask except the float bits */
|
|
gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);
|
|
|
|
switch (mode) {
|
|
case MISC_REGISTERS_GPIO_OUTPUT_LOW:
|
|
DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output low\n",
|
|
gpio_num, gpio_shift);
|
|
/* clear FLOAT and set CLR */
|
|
gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
|
|
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS);
|
|
break;
|
|
|
|
case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
|
|
DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output high\n",
|
|
gpio_num, gpio_shift);
|
|
/* clear FLOAT and set SET */
|
|
gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
|
|
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
|
|
break;
|
|
|
|
case MISC_REGISTERS_GPIO_INPUT_HI_Z:
|
|
DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> input\n",
|
|
gpio_num, gpio_shift);
|
|
/* set FLOAT */
|
|
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
REG_WR(bp, MISC_REG_GPIO, gpio_reg);
|
|
bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port)
|
|
{
|
|
/* The GPIO should be swapped if swap register is set and active */
|
|
int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
|
|
REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port;
|
|
int gpio_shift = gpio_num +
|
|
(gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
|
|
u32 gpio_mask = (1 << gpio_shift);
|
|
u32 gpio_reg;
|
|
|
|
if (gpio_num > MISC_REGISTERS_GPIO_3) {
|
|
BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
|
|
return -EINVAL;
|
|
}
|
|
|
|
bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
|
|
/* read GPIO int */
|
|
gpio_reg = REG_RD(bp, MISC_REG_GPIO_INT);
|
|
|
|
switch (mode) {
|
|
case MISC_REGISTERS_GPIO_INT_OUTPUT_CLR:
|
|
DP(NETIF_MSG_LINK, "Clear GPIO INT %d (shift %d) -> "
|
|
"output low\n", gpio_num, gpio_shift);
|
|
/* clear SET and set CLR */
|
|
gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
|
|
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
|
|
break;
|
|
|
|
case MISC_REGISTERS_GPIO_INT_OUTPUT_SET:
|
|
DP(NETIF_MSG_LINK, "Set GPIO INT %d (shift %d) -> "
|
|
"output high\n", gpio_num, gpio_shift);
|
|
/* clear CLR and set SET */
|
|
gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
|
|
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
REG_WR(bp, MISC_REG_GPIO_INT, gpio_reg);
|
|
bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
|
|
{
|
|
u32 spio_mask = (1 << spio_num);
|
|
u32 spio_reg;
|
|
|
|
if ((spio_num < MISC_REGISTERS_SPIO_4) ||
|
|
(spio_num > MISC_REGISTERS_SPIO_7)) {
|
|
BNX2X_ERR("Invalid SPIO %d\n", spio_num);
|
|
return -EINVAL;
|
|
}
|
|
|
|
bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
|
|
/* read SPIO and mask except the float bits */
|
|
spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_REGISTERS_SPIO_FLOAT);
|
|
|
|
switch (mode) {
|
|
case MISC_REGISTERS_SPIO_OUTPUT_LOW:
|
|
DP(NETIF_MSG_LINK, "Set SPIO %d -> output low\n", spio_num);
|
|
/* clear FLOAT and set CLR */
|
|
spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
|
|
spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_CLR_POS);
|
|
break;
|
|
|
|
case MISC_REGISTERS_SPIO_OUTPUT_HIGH:
|
|
DP(NETIF_MSG_LINK, "Set SPIO %d -> output high\n", spio_num);
|
|
/* clear FLOAT and set SET */
|
|
spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
|
|
spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_SET_POS);
|
|
break;
|
|
|
|
case MISC_REGISTERS_SPIO_INPUT_HI_Z:
|
|
DP(NETIF_MSG_LINK, "Set SPIO %d -> input\n", spio_num);
|
|
/* set FLOAT */
|
|
spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
REG_WR(bp, MISC_REG_SPIO, spio_reg);
|
|
bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void bnx2x_calc_fc_adv(struct bnx2x *bp)
|
|
{
|
|
switch (bp->link_vars.ieee_fc &
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) {
|
|
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE:
|
|
bp->port.advertising &= ~(ADVERTISED_Asym_Pause |
|
|
ADVERTISED_Pause);
|
|
break;
|
|
|
|
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH:
|
|
bp->port.advertising |= (ADVERTISED_Asym_Pause |
|
|
ADVERTISED_Pause);
|
|
break;
|
|
|
|
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC:
|
|
bp->port.advertising |= ADVERTISED_Asym_Pause;
|
|
break;
|
|
|
|
default:
|
|
bp->port.advertising &= ~(ADVERTISED_Asym_Pause |
|
|
ADVERTISED_Pause);
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
u8 bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode)
|
|
{
|
|
if (!BP_NOMCP(bp)) {
|
|
u8 rc;
|
|
|
|
/* Initialize link parameters structure variables */
|
|
/* It is recommended to turn off RX FC for jumbo frames
|
|
for better performance */
|
|
if (bp->dev->mtu > 5000)
|
|
bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_TX;
|
|
else
|
|
bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH;
|
|
|
|
bnx2x_acquire_phy_lock(bp);
|
|
|
|
if (load_mode == LOAD_DIAG)
|
|
bp->link_params.loopback_mode = LOOPBACK_XGXS_10;
|
|
|
|
rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
|
|
|
|
bnx2x_release_phy_lock(bp);
|
|
|
|
bnx2x_calc_fc_adv(bp);
|
|
|
|
if (CHIP_REV_IS_SLOW(bp) && bp->link_vars.link_up) {
|
|
bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
|
|
bnx2x_link_report(bp);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
BNX2X_ERR("Bootcode is missing - can not initialize link\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
void bnx2x_link_set(struct bnx2x *bp)
|
|
{
|
|
if (!BP_NOMCP(bp)) {
|
|
bnx2x_acquire_phy_lock(bp);
|
|
bnx2x_phy_init(&bp->link_params, &bp->link_vars);
|
|
bnx2x_release_phy_lock(bp);
|
|
|
|
bnx2x_calc_fc_adv(bp);
|
|
} else
|
|
BNX2X_ERR("Bootcode is missing - can not set link\n");
|
|
}
|
|
|
|
static void bnx2x__link_reset(struct bnx2x *bp)
|
|
{
|
|
if (!BP_NOMCP(bp)) {
|
|
bnx2x_acquire_phy_lock(bp);
|
|
bnx2x_link_reset(&bp->link_params, &bp->link_vars, 1);
|
|
bnx2x_release_phy_lock(bp);
|
|
} else
|
|
BNX2X_ERR("Bootcode is missing - can not reset link\n");
|
|
}
|
|
|
|
u8 bnx2x_link_test(struct bnx2x *bp)
|
|
{
|
|
u8 rc = 0;
|
|
|
|
if (!BP_NOMCP(bp)) {
|
|
bnx2x_acquire_phy_lock(bp);
|
|
rc = bnx2x_test_link(&bp->link_params, &bp->link_vars);
|
|
bnx2x_release_phy_lock(bp);
|
|
} else
|
|
BNX2X_ERR("Bootcode is missing - can not test link\n");
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void bnx2x_init_port_minmax(struct bnx2x *bp)
|
|
{
|
|
u32 r_param = bp->link_vars.line_speed / 8;
|
|
u32 fair_periodic_timeout_usec;
|
|
u32 t_fair;
|
|
|
|
memset(&(bp->cmng.rs_vars), 0,
|
|
sizeof(struct rate_shaping_vars_per_port));
|
|
memset(&(bp->cmng.fair_vars), 0, sizeof(struct fairness_vars_per_port));
|
|
|
|
/* 100 usec in SDM ticks = 25 since each tick is 4 usec */
|
|
bp->cmng.rs_vars.rs_periodic_timeout = RS_PERIODIC_TIMEOUT_USEC / 4;
|
|
|
|
/* this is the threshold below which no timer arming will occur
|
|
1.25 coefficient is for the threshold to be a little bigger
|
|
than the real time, to compensate for timer in-accuracy */
|
|
bp->cmng.rs_vars.rs_threshold =
|
|
(RS_PERIODIC_TIMEOUT_USEC * r_param * 5) / 4;
|
|
|
|
/* resolution of fairness timer */
|
|
fair_periodic_timeout_usec = QM_ARB_BYTES / r_param;
|
|
/* for 10G it is 1000usec. for 1G it is 10000usec. */
|
|
t_fair = T_FAIR_COEF / bp->link_vars.line_speed;
|
|
|
|
/* this is the threshold below which we won't arm the timer anymore */
|
|
bp->cmng.fair_vars.fair_threshold = QM_ARB_BYTES;
|
|
|
|
/* we multiply by 1e3/8 to get bytes/msec.
|
|
We don't want the credits to pass a credit
|
|
of the t_fair*FAIR_MEM (algorithm resolution) */
|
|
bp->cmng.fair_vars.upper_bound = r_param * t_fair * FAIR_MEM;
|
|
/* since each tick is 4 usec */
|
|
bp->cmng.fair_vars.fairness_timeout = fair_periodic_timeout_usec / 4;
|
|
}
|
|
|
|
/* Calculates the sum of vn_min_rates.
|
|
It's needed for further normalizing of the min_rates.
|
|
Returns:
|
|
sum of vn_min_rates.
|
|
or
|
|
0 - if all the min_rates are 0.
|
|
In the later case fainess algorithm should be deactivated.
|
|
If not all min_rates are zero then those that are zeroes will be set to 1.
|
|
*/
|
|
static void bnx2x_calc_vn_weight_sum(struct bnx2x *bp)
|
|
{
|
|
int all_zero = 1;
|
|
int port = BP_PORT(bp);
|
|
int vn;
|
|
|
|
bp->vn_weight_sum = 0;
|
|
for (vn = VN_0; vn < E1HVN_MAX; vn++) {
|
|
int func = 2*vn + port;
|
|
u32 vn_cfg = SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
|
|
u32 vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
|
|
FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
|
|
|
|
/* Skip hidden vns */
|
|
if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE)
|
|
continue;
|
|
|
|
/* If min rate is zero - set it to 1 */
|
|
if (!vn_min_rate)
|
|
vn_min_rate = DEF_MIN_RATE;
|
|
else
|
|
all_zero = 0;
|
|
|
|
bp->vn_weight_sum += vn_min_rate;
|
|
}
|
|
|
|
/* ... only if all min rates are zeros - disable fairness */
|
|
if (all_zero) {
|
|
bp->cmng.flags.cmng_enables &=
|
|
~CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
|
|
DP(NETIF_MSG_IFUP, "All MIN values are zeroes"
|
|
" fairness will be disabled\n");
|
|
} else
|
|
bp->cmng.flags.cmng_enables |=
|
|
CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
|
|
}
|
|
|
|
static void bnx2x_init_vn_minmax(struct bnx2x *bp, int func)
|
|
{
|
|
struct rate_shaping_vars_per_vn m_rs_vn;
|
|
struct fairness_vars_per_vn m_fair_vn;
|
|
u32 vn_cfg = SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
|
|
u16 vn_min_rate, vn_max_rate;
|
|
int i;
|
|
|
|
/* If function is hidden - set min and max to zeroes */
|
|
if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) {
|
|
vn_min_rate = 0;
|
|
vn_max_rate = 0;
|
|
|
|
} else {
|
|
vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
|
|
FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
|
|
/* If min rate is zero - set it to 1 */
|
|
if (!vn_min_rate)
|
|
vn_min_rate = DEF_MIN_RATE;
|
|
vn_max_rate = ((vn_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
|
|
FUNC_MF_CFG_MAX_BW_SHIFT) * 100;
|
|
}
|
|
DP(NETIF_MSG_IFUP,
|
|
"func %d: vn_min_rate %d vn_max_rate %d vn_weight_sum %d\n",
|
|
func, vn_min_rate, vn_max_rate, bp->vn_weight_sum);
|
|
|
|
memset(&m_rs_vn, 0, sizeof(struct rate_shaping_vars_per_vn));
|
|
memset(&m_fair_vn, 0, sizeof(struct fairness_vars_per_vn));
|
|
|
|
/* global vn counter - maximal Mbps for this vn */
|
|
m_rs_vn.vn_counter.rate = vn_max_rate;
|
|
|
|
/* quota - number of bytes transmitted in this period */
|
|
m_rs_vn.vn_counter.quota =
|
|
(vn_max_rate * RS_PERIODIC_TIMEOUT_USEC) / 8;
|
|
|
|
if (bp->vn_weight_sum) {
|
|
/* credit for each period of the fairness algorithm:
|
|
number of bytes in T_FAIR (the vn share the port rate).
|
|
vn_weight_sum should not be larger than 10000, thus
|
|
T_FAIR_COEF / (8 * vn_weight_sum) will always be greater
|
|
than zero */
|
|
m_fair_vn.vn_credit_delta =
|
|
max_t(u32, (vn_min_rate * (T_FAIR_COEF /
|
|
(8 * bp->vn_weight_sum))),
|
|
(bp->cmng.fair_vars.fair_threshold * 2));
|
|
DP(NETIF_MSG_IFUP, "m_fair_vn.vn_credit_delta %d\n",
|
|
m_fair_vn.vn_credit_delta);
|
|
}
|
|
|
|
/* Store it to internal memory */
|
|
for (i = 0; i < sizeof(struct rate_shaping_vars_per_vn)/4; i++)
|
|
REG_WR(bp, BAR_XSTRORM_INTMEM +
|
|
XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(func) + i * 4,
|
|
((u32 *)(&m_rs_vn))[i]);
|
|
|
|
for (i = 0; i < sizeof(struct fairness_vars_per_vn)/4; i++)
|
|
REG_WR(bp, BAR_XSTRORM_INTMEM +
|
|
XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(func) + i * 4,
|
|
((u32 *)(&m_fair_vn))[i]);
|
|
}
|
|
|
|
|
|
/* This function is called upon link interrupt */
|
|
static void bnx2x_link_attn(struct bnx2x *bp)
|
|
{
|
|
u32 prev_link_status = bp->link_vars.link_status;
|
|
/* Make sure that we are synced with the current statistics */
|
|
bnx2x_stats_handle(bp, STATS_EVENT_STOP);
|
|
|
|
bnx2x_link_update(&bp->link_params, &bp->link_vars);
|
|
|
|
if (bp->link_vars.link_up) {
|
|
|
|
/* dropless flow control */
|
|
if (CHIP_IS_E1H(bp) && bp->dropless_fc) {
|
|
int port = BP_PORT(bp);
|
|
u32 pause_enabled = 0;
|
|
|
|
if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX)
|
|
pause_enabled = 1;
|
|
|
|
REG_WR(bp, BAR_USTRORM_INTMEM +
|
|
USTORM_ETH_PAUSE_ENABLED_OFFSET(port),
|
|
pause_enabled);
|
|
}
|
|
|
|
if (bp->link_vars.mac_type == MAC_TYPE_BMAC) {
|
|
struct host_port_stats *pstats;
|
|
|
|
pstats = bnx2x_sp(bp, port_stats);
|
|
/* reset old bmac stats */
|
|
memset(&(pstats->mac_stx[0]), 0,
|
|
sizeof(struct mac_stx));
|
|
}
|
|
if (bp->state == BNX2X_STATE_OPEN)
|
|
bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
|
|
}
|
|
|
|
/* indicate link status only if link status actually changed */
|
|
if (prev_link_status != bp->link_vars.link_status)
|
|
bnx2x_link_report(bp);
|
|
|
|
if (IS_E1HMF(bp)) {
|
|
int port = BP_PORT(bp);
|
|
int func;
|
|
int vn;
|
|
|
|
/* Set the attention towards other drivers on the same port */
|
|
for (vn = VN_0; vn < E1HVN_MAX; vn++) {
|
|
if (vn == BP_E1HVN(bp))
|
|
continue;
|
|
|
|
func = ((vn << 1) | port);
|
|
REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_0 +
|
|
(LINK_SYNC_ATTENTION_BIT_FUNC_0 + func)*4, 1);
|
|
}
|
|
|
|
if (bp->link_vars.link_up) {
|
|
int i;
|
|
|
|
/* Init rate shaping and fairness contexts */
|
|
bnx2x_init_port_minmax(bp);
|
|
|
|
for (vn = VN_0; vn < E1HVN_MAX; vn++)
|
|
bnx2x_init_vn_minmax(bp, 2*vn + port);
|
|
|
|
/* Store it to internal memory */
|
|
for (i = 0;
|
|
i < sizeof(struct cmng_struct_per_port) / 4; i++)
|
|
REG_WR(bp, BAR_XSTRORM_INTMEM +
|
|
XSTORM_CMNG_PER_PORT_VARS_OFFSET(port) + i*4,
|
|
((u32 *)(&bp->cmng))[i]);
|
|
}
|
|
}
|
|
}
|
|
|
|
void bnx2x__link_status_update(struct bnx2x *bp)
|
|
{
|
|
if ((bp->state != BNX2X_STATE_OPEN) || (bp->flags & MF_FUNC_DIS))
|
|
return;
|
|
|
|
bnx2x_link_status_update(&bp->link_params, &bp->link_vars);
|
|
|
|
if (bp->link_vars.link_up)
|
|
bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
|
|
else
|
|
bnx2x_stats_handle(bp, STATS_EVENT_STOP);
|
|
|
|
bnx2x_calc_vn_weight_sum(bp);
|
|
|
|
/* indicate link status */
|
|
bnx2x_link_report(bp);
|
|
}
|
|
|
|
static void bnx2x_pmf_update(struct bnx2x *bp)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
u32 val;
|
|
|
|
bp->port.pmf = 1;
|
|
DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);
|
|
|
|
/* enable nig attention */
|
|
val = (0xff0f | (1 << (BP_E1HVN(bp) + 4)));
|
|
REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val);
|
|
REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val);
|
|
|
|
bnx2x_stats_handle(bp, STATS_EVENT_PMF);
|
|
}
|
|
|
|
/* end of Link */
|
|
|
|
/* slow path */
|
|
|
|
/*
|
|
* General service functions
|
|
*/
|
|
|
|
/* send the MCP a request, block until there is a reply */
|
|
u32 bnx2x_fw_command(struct bnx2x *bp, u32 command)
|
|
{
|
|
int func = BP_FUNC(bp);
|
|
u32 seq = ++bp->fw_seq;
|
|
u32 rc = 0;
|
|
u32 cnt = 1;
|
|
u8 delay = CHIP_REV_IS_SLOW(bp) ? 100 : 10;
|
|
|
|
mutex_lock(&bp->fw_mb_mutex);
|
|
SHMEM_WR(bp, func_mb[func].drv_mb_header, (command | seq));
|
|
DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", (command | seq));
|
|
|
|
do {
|
|
/* let the FW do it's magic ... */
|
|
msleep(delay);
|
|
|
|
rc = SHMEM_RD(bp, func_mb[func].fw_mb_header);
|
|
|
|
/* Give the FW up to 5 second (500*10ms) */
|
|
} while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 500));
|
|
|
|
DP(BNX2X_MSG_MCP, "[after %d ms] read (%x) seq is (%x) from FW MB\n",
|
|
cnt*delay, rc, seq);
|
|
|
|
/* is this a reply to our command? */
|
|
if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK))
|
|
rc &= FW_MSG_CODE_MASK;
|
|
else {
|
|
/* FW BUG! */
|
|
BNX2X_ERR("FW failed to respond!\n");
|
|
bnx2x_fw_dump(bp);
|
|
rc = 0;
|
|
}
|
|
mutex_unlock(&bp->fw_mb_mutex);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void bnx2x_e1h_disable(struct bnx2x *bp)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
|
|
netif_tx_disable(bp->dev);
|
|
|
|
REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
|
|
|
|
netif_carrier_off(bp->dev);
|
|
}
|
|
|
|
static void bnx2x_e1h_enable(struct bnx2x *bp)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
|
|
REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 1);
|
|
|
|
/* Tx queue should be only reenabled */
|
|
netif_tx_wake_all_queues(bp->dev);
|
|
|
|
/*
|
|
* Should not call netif_carrier_on since it will be called if the link
|
|
* is up when checking for link state
|
|
*/
|
|
}
|
|
|
|
static void bnx2x_update_min_max(struct bnx2x *bp)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
int vn, i;
|
|
|
|
/* Init rate shaping and fairness contexts */
|
|
bnx2x_init_port_minmax(bp);
|
|
|
|
bnx2x_calc_vn_weight_sum(bp);
|
|
|
|
for (vn = VN_0; vn < E1HVN_MAX; vn++)
|
|
bnx2x_init_vn_minmax(bp, 2*vn + port);
|
|
|
|
if (bp->port.pmf) {
|
|
int func;
|
|
|
|
/* Set the attention towards other drivers on the same port */
|
|
for (vn = VN_0; vn < E1HVN_MAX; vn++) {
|
|
if (vn == BP_E1HVN(bp))
|
|
continue;
|
|
|
|
func = ((vn << 1) | port);
|
|
REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_0 +
|
|
(LINK_SYNC_ATTENTION_BIT_FUNC_0 + func)*4, 1);
|
|
}
|
|
|
|
/* Store it to internal memory */
|
|
for (i = 0; i < sizeof(struct cmng_struct_per_port) / 4; i++)
|
|
REG_WR(bp, BAR_XSTRORM_INTMEM +
|
|
XSTORM_CMNG_PER_PORT_VARS_OFFSET(port) + i*4,
|
|
((u32 *)(&bp->cmng))[i]);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_dcc_event(struct bnx2x *bp, u32 dcc_event)
|
|
{
|
|
DP(BNX2X_MSG_MCP, "dcc_event 0x%x\n", dcc_event);
|
|
|
|
if (dcc_event & DRV_STATUS_DCC_DISABLE_ENABLE_PF) {
|
|
|
|
/*
|
|
* This is the only place besides the function initialization
|
|
* where the bp->flags can change so it is done without any
|
|
* locks
|
|
*/
|
|
if (bp->mf_config & FUNC_MF_CFG_FUNC_DISABLED) {
|
|
DP(NETIF_MSG_IFDOWN, "mf_cfg function disabled\n");
|
|
bp->flags |= MF_FUNC_DIS;
|
|
|
|
bnx2x_e1h_disable(bp);
|
|
} else {
|
|
DP(NETIF_MSG_IFUP, "mf_cfg function enabled\n");
|
|
bp->flags &= ~MF_FUNC_DIS;
|
|
|
|
bnx2x_e1h_enable(bp);
|
|
}
|
|
dcc_event &= ~DRV_STATUS_DCC_DISABLE_ENABLE_PF;
|
|
}
|
|
if (dcc_event & DRV_STATUS_DCC_BANDWIDTH_ALLOCATION) {
|
|
|
|
bnx2x_update_min_max(bp);
|
|
dcc_event &= ~DRV_STATUS_DCC_BANDWIDTH_ALLOCATION;
|
|
}
|
|
|
|
/* Report results to MCP */
|
|
if (dcc_event)
|
|
bnx2x_fw_command(bp, DRV_MSG_CODE_DCC_FAILURE);
|
|
else
|
|
bnx2x_fw_command(bp, DRV_MSG_CODE_DCC_OK);
|
|
}
|
|
|
|
/* must be called under the spq lock */
|
|
static inline struct eth_spe *bnx2x_sp_get_next(struct bnx2x *bp)
|
|
{
|
|
struct eth_spe *next_spe = bp->spq_prod_bd;
|
|
|
|
if (bp->spq_prod_bd == bp->spq_last_bd) {
|
|
bp->spq_prod_bd = bp->spq;
|
|
bp->spq_prod_idx = 0;
|
|
DP(NETIF_MSG_TIMER, "end of spq\n");
|
|
} else {
|
|
bp->spq_prod_bd++;
|
|
bp->spq_prod_idx++;
|
|
}
|
|
return next_spe;
|
|
}
|
|
|
|
/* must be called under the spq lock */
|
|
static inline void bnx2x_sp_prod_update(struct bnx2x *bp)
|
|
{
|
|
int func = BP_FUNC(bp);
|
|
|
|
/* Make sure that BD data is updated before writing the producer */
|
|
wmb();
|
|
|
|
REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func),
|
|
bp->spq_prod_idx);
|
|
mmiowb();
|
|
}
|
|
|
|
/* the slow path queue is odd since completions arrive on the fastpath ring */
|
|
int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
|
|
u32 data_hi, u32 data_lo, int common)
|
|
{
|
|
struct eth_spe *spe;
|
|
|
|
#ifdef BNX2X_STOP_ON_ERROR
|
|
if (unlikely(bp->panic))
|
|
return -EIO;
|
|
#endif
|
|
|
|
spin_lock_bh(&bp->spq_lock);
|
|
|
|
if (!bp->spq_left) {
|
|
BNX2X_ERR("BUG! SPQ ring full!\n");
|
|
spin_unlock_bh(&bp->spq_lock);
|
|
bnx2x_panic();
|
|
return -EBUSY;
|
|
}
|
|
|
|
spe = bnx2x_sp_get_next(bp);
|
|
|
|
/* CID needs port number to be encoded int it */
|
|
spe->hdr.conn_and_cmd_data =
|
|
cpu_to_le32((command << SPE_HDR_CMD_ID_SHIFT) |
|
|
HW_CID(bp, cid));
|
|
spe->hdr.type = cpu_to_le16(ETH_CONNECTION_TYPE);
|
|
if (common)
|
|
spe->hdr.type |=
|
|
cpu_to_le16((1 << SPE_HDR_COMMON_RAMROD_SHIFT));
|
|
|
|
spe->data.mac_config_addr.hi = cpu_to_le32(data_hi);
|
|
spe->data.mac_config_addr.lo = cpu_to_le32(data_lo);
|
|
|
|
bp->spq_left--;
|
|
|
|
DP(BNX2X_MSG_SP/*NETIF_MSG_TIMER*/,
|
|
"SPQE[%x] (%x:%x) command %d hw_cid %x data (%x:%x) left %x\n",
|
|
bp->spq_prod_idx, (u32)U64_HI(bp->spq_mapping),
|
|
(u32)(U64_LO(bp->spq_mapping) +
|
|
(void *)bp->spq_prod_bd - (void *)bp->spq), command,
|
|
HW_CID(bp, cid), data_hi, data_lo, bp->spq_left);
|
|
|
|
bnx2x_sp_prod_update(bp);
|
|
spin_unlock_bh(&bp->spq_lock);
|
|
return 0;
|
|
}
|
|
|
|
/* acquire split MCP access lock register */
|
|
static int bnx2x_acquire_alr(struct bnx2x *bp)
|
|
{
|
|
u32 j, val;
|
|
int rc = 0;
|
|
|
|
might_sleep();
|
|
for (j = 0; j < 1000; j++) {
|
|
val = (1UL << 31);
|
|
REG_WR(bp, GRCBASE_MCP + 0x9c, val);
|
|
val = REG_RD(bp, GRCBASE_MCP + 0x9c);
|
|
if (val & (1L << 31))
|
|
break;
|
|
|
|
msleep(5);
|
|
}
|
|
if (!(val & (1L << 31))) {
|
|
BNX2X_ERR("Cannot acquire MCP access lock register\n");
|
|
rc = -EBUSY;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
/* release split MCP access lock register */
|
|
static void bnx2x_release_alr(struct bnx2x *bp)
|
|
{
|
|
REG_WR(bp, GRCBASE_MCP + 0x9c, 0);
|
|
}
|
|
|
|
static inline u16 bnx2x_update_dsb_idx(struct bnx2x *bp)
|
|
{
|
|
struct host_def_status_block *def_sb = bp->def_status_blk;
|
|
u16 rc = 0;
|
|
|
|
barrier(); /* status block is written to by the chip */
|
|
if (bp->def_att_idx != def_sb->atten_status_block.attn_bits_index) {
|
|
bp->def_att_idx = def_sb->atten_status_block.attn_bits_index;
|
|
rc |= 1;
|
|
}
|
|
if (bp->def_c_idx != def_sb->c_def_status_block.status_block_index) {
|
|
bp->def_c_idx = def_sb->c_def_status_block.status_block_index;
|
|
rc |= 2;
|
|
}
|
|
if (bp->def_u_idx != def_sb->u_def_status_block.status_block_index) {
|
|
bp->def_u_idx = def_sb->u_def_status_block.status_block_index;
|
|
rc |= 4;
|
|
}
|
|
if (bp->def_x_idx != def_sb->x_def_status_block.status_block_index) {
|
|
bp->def_x_idx = def_sb->x_def_status_block.status_block_index;
|
|
rc |= 8;
|
|
}
|
|
if (bp->def_t_idx != def_sb->t_def_status_block.status_block_index) {
|
|
bp->def_t_idx = def_sb->t_def_status_block.status_block_index;
|
|
rc |= 16;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* slow path service functions
|
|
*/
|
|
|
|
static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
u32 hc_addr = (HC_REG_COMMAND_REG + port*32 +
|
|
COMMAND_REG_ATTN_BITS_SET);
|
|
u32 aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
|
|
MISC_REG_AEU_MASK_ATTN_FUNC_0;
|
|
u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
|
|
NIG_REG_MASK_INTERRUPT_PORT0;
|
|
u32 aeu_mask;
|
|
u32 nig_mask = 0;
|
|
|
|
if (bp->attn_state & asserted)
|
|
BNX2X_ERR("IGU ERROR\n");
|
|
|
|
bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
|
|
aeu_mask = REG_RD(bp, aeu_addr);
|
|
|
|
DP(NETIF_MSG_HW, "aeu_mask %x newly asserted %x\n",
|
|
aeu_mask, asserted);
|
|
aeu_mask &= ~(asserted & 0x3ff);
|
|
DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask);
|
|
|
|
REG_WR(bp, aeu_addr, aeu_mask);
|
|
bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
|
|
|
|
DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state);
|
|
bp->attn_state |= asserted;
|
|
DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state);
|
|
|
|
if (asserted & ATTN_HARD_WIRED_MASK) {
|
|
if (asserted & ATTN_NIG_FOR_FUNC) {
|
|
|
|
bnx2x_acquire_phy_lock(bp);
|
|
|
|
/* save nig interrupt mask */
|
|
nig_mask = REG_RD(bp, nig_int_mask_addr);
|
|
REG_WR(bp, nig_int_mask_addr, 0);
|
|
|
|
bnx2x_link_attn(bp);
|
|
|
|
/* handle unicore attn? */
|
|
}
|
|
if (asserted & ATTN_SW_TIMER_4_FUNC)
|
|
DP(NETIF_MSG_HW, "ATTN_SW_TIMER_4_FUNC!\n");
|
|
|
|
if (asserted & GPIO_2_FUNC)
|
|
DP(NETIF_MSG_HW, "GPIO_2_FUNC!\n");
|
|
|
|
if (asserted & GPIO_3_FUNC)
|
|
DP(NETIF_MSG_HW, "GPIO_3_FUNC!\n");
|
|
|
|
if (asserted & GPIO_4_FUNC)
|
|
DP(NETIF_MSG_HW, "GPIO_4_FUNC!\n");
|
|
|
|
if (port == 0) {
|
|
if (asserted & ATTN_GENERAL_ATTN_1) {
|
|
DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_1!\n");
|
|
REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_1, 0x0);
|
|
}
|
|
if (asserted & ATTN_GENERAL_ATTN_2) {
|
|
DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_2!\n");
|
|
REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_2, 0x0);
|
|
}
|
|
if (asserted & ATTN_GENERAL_ATTN_3) {
|
|
DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_3!\n");
|
|
REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_3, 0x0);
|
|
}
|
|
} else {
|
|
if (asserted & ATTN_GENERAL_ATTN_4) {
|
|
DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_4!\n");
|
|
REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_4, 0x0);
|
|
}
|
|
if (asserted & ATTN_GENERAL_ATTN_5) {
|
|
DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_5!\n");
|
|
REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_5, 0x0);
|
|
}
|
|
if (asserted & ATTN_GENERAL_ATTN_6) {
|
|
DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_6!\n");
|
|
REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_6, 0x0);
|
|
}
|
|
}
|
|
|
|
} /* if hardwired */
|
|
|
|
DP(NETIF_MSG_HW, "about to mask 0x%08x at HC addr 0x%x\n",
|
|
asserted, hc_addr);
|
|
REG_WR(bp, hc_addr, asserted);
|
|
|
|
/* now set back the mask */
|
|
if (asserted & ATTN_NIG_FOR_FUNC) {
|
|
REG_WR(bp, nig_int_mask_addr, nig_mask);
|
|
bnx2x_release_phy_lock(bp);
|
|
}
|
|
}
|
|
|
|
static inline void bnx2x_fan_failure(struct bnx2x *bp)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
|
|
/* mark the failure */
|
|
bp->link_params.ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
|
|
bp->link_params.ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
|
|
SHMEM_WR(bp, dev_info.port_hw_config[port].external_phy_config,
|
|
bp->link_params.ext_phy_config);
|
|
|
|
/* log the failure */
|
|
netdev_err(bp->dev, "Fan Failure on Network Controller has caused"
|
|
" the driver to shutdown the card to prevent permanent"
|
|
" damage. Please contact OEM Support for assistance\n");
|
|
}
|
|
|
|
static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
int reg_offset;
|
|
u32 val, swap_val, swap_override;
|
|
|
|
reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
|
|
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) {
|
|
|
|
val = REG_RD(bp, reg_offset);
|
|
val &= ~AEU_INPUTS_ATTN_BITS_SPIO5;
|
|
REG_WR(bp, reg_offset, val);
|
|
|
|
BNX2X_ERR("SPIO5 hw attention\n");
|
|
|
|
/* Fan failure attention */
|
|
switch (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config)) {
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
|
|
/* Low power mode is controlled by GPIO 2 */
|
|
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
|
|
MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
|
|
/* The PHY reset is controlled by GPIO 1 */
|
|
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
|
|
MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
|
|
/* The PHY reset is controlled by GPIO 1 */
|
|
/* fake the port number to cancel the swap done in
|
|
set_gpio() */
|
|
swap_val = REG_RD(bp, NIG_REG_PORT_SWAP);
|
|
swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE);
|
|
port = (swap_val && swap_override) ^ 1;
|
|
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
|
|
MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
bnx2x_fan_failure(bp);
|
|
}
|
|
|
|
if (attn & (AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 |
|
|
AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1)) {
|
|
bnx2x_acquire_phy_lock(bp);
|
|
bnx2x_handle_module_detect_int(&bp->link_params);
|
|
bnx2x_release_phy_lock(bp);
|
|
}
|
|
|
|
if (attn & HW_INTERRUT_ASSERT_SET_0) {
|
|
|
|
val = REG_RD(bp, reg_offset);
|
|
val &= ~(attn & HW_INTERRUT_ASSERT_SET_0);
|
|
REG_WR(bp, reg_offset, val);
|
|
|
|
BNX2X_ERR("FATAL HW block attention set0 0x%x\n",
|
|
(u32)(attn & HW_INTERRUT_ASSERT_SET_0));
|
|
bnx2x_panic();
|
|
}
|
|
}
|
|
|
|
static inline void bnx2x_attn_int_deasserted1(struct bnx2x *bp, u32 attn)
|
|
{
|
|
u32 val;
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT) {
|
|
|
|
val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR);
|
|
BNX2X_ERR("DB hw attention 0x%x\n", val);
|
|
/* DORQ discard attention */
|
|
if (val & 0x2)
|
|
BNX2X_ERR("FATAL error from DORQ\n");
|
|
}
|
|
|
|
if (attn & HW_INTERRUT_ASSERT_SET_1) {
|
|
|
|
int port = BP_PORT(bp);
|
|
int reg_offset;
|
|
|
|
reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 :
|
|
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1);
|
|
|
|
val = REG_RD(bp, reg_offset);
|
|
val &= ~(attn & HW_INTERRUT_ASSERT_SET_1);
|
|
REG_WR(bp, reg_offset, val);
|
|
|
|
BNX2X_ERR("FATAL HW block attention set1 0x%x\n",
|
|
(u32)(attn & HW_INTERRUT_ASSERT_SET_1));
|
|
bnx2x_panic();
|
|
}
|
|
}
|
|
|
|
static inline void bnx2x_attn_int_deasserted2(struct bnx2x *bp, u32 attn)
|
|
{
|
|
u32 val;
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) {
|
|
|
|
val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR);
|
|
BNX2X_ERR("CFC hw attention 0x%x\n", val);
|
|
/* CFC error attention */
|
|
if (val & 0x2)
|
|
BNX2X_ERR("FATAL error from CFC\n");
|
|
}
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) {
|
|
|
|
val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0);
|
|
BNX2X_ERR("PXP hw attention 0x%x\n", val);
|
|
/* RQ_USDMDP_FIFO_OVERFLOW */
|
|
if (val & 0x18000)
|
|
BNX2X_ERR("FATAL error from PXP\n");
|
|
}
|
|
|
|
if (attn & HW_INTERRUT_ASSERT_SET_2) {
|
|
|
|
int port = BP_PORT(bp);
|
|
int reg_offset;
|
|
|
|
reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 :
|
|
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2);
|
|
|
|
val = REG_RD(bp, reg_offset);
|
|
val &= ~(attn & HW_INTERRUT_ASSERT_SET_2);
|
|
REG_WR(bp, reg_offset, val);
|
|
|
|
BNX2X_ERR("FATAL HW block attention set2 0x%x\n",
|
|
(u32)(attn & HW_INTERRUT_ASSERT_SET_2));
|
|
bnx2x_panic();
|
|
}
|
|
}
|
|
|
|
static inline void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn)
|
|
{
|
|
u32 val;
|
|
|
|
if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) {
|
|
|
|
if (attn & BNX2X_PMF_LINK_ASSERT) {
|
|
int func = BP_FUNC(bp);
|
|
|
|
REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0);
|
|
bp->mf_config = SHMEM_RD(bp,
|
|
mf_cfg.func_mf_config[func].config);
|
|
val = SHMEM_RD(bp, func_mb[func].drv_status);
|
|
if (val & DRV_STATUS_DCC_EVENT_MASK)
|
|
bnx2x_dcc_event(bp,
|
|
(val & DRV_STATUS_DCC_EVENT_MASK));
|
|
bnx2x__link_status_update(bp);
|
|
if ((bp->port.pmf == 0) && (val & DRV_STATUS_PMF))
|
|
bnx2x_pmf_update(bp);
|
|
|
|
} else if (attn & BNX2X_MC_ASSERT_BITS) {
|
|
|
|
BNX2X_ERR("MC assert!\n");
|
|
REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_10, 0);
|
|
REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_9, 0);
|
|
REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_8, 0);
|
|
REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_7, 0);
|
|
bnx2x_panic();
|
|
|
|
} else if (attn & BNX2X_MCP_ASSERT) {
|
|
|
|
BNX2X_ERR("MCP assert!\n");
|
|
REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_11, 0);
|
|
bnx2x_fw_dump(bp);
|
|
|
|
} else
|
|
BNX2X_ERR("Unknown HW assert! (attn 0x%x)\n", attn);
|
|
}
|
|
|
|
if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) {
|
|
BNX2X_ERR("LATCHED attention 0x%08x (masked)\n", attn);
|
|
if (attn & BNX2X_GRC_TIMEOUT) {
|
|
val = CHIP_IS_E1H(bp) ?
|
|
REG_RD(bp, MISC_REG_GRC_TIMEOUT_ATTN) : 0;
|
|
BNX2X_ERR("GRC time-out 0x%08x\n", val);
|
|
}
|
|
if (attn & BNX2X_GRC_RSV) {
|
|
val = CHIP_IS_E1H(bp) ?
|
|
REG_RD(bp, MISC_REG_GRC_RSV_ATTN) : 0;
|
|
BNX2X_ERR("GRC reserved 0x%08x\n", val);
|
|
}
|
|
REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff);
|
|
}
|
|
}
|
|
|
|
#define BNX2X_MISC_GEN_REG MISC_REG_GENERIC_POR_1
|
|
#define LOAD_COUNTER_BITS 16 /* Number of bits for load counter */
|
|
#define LOAD_COUNTER_MASK (((u32)0x1 << LOAD_COUNTER_BITS) - 1)
|
|
#define RESET_DONE_FLAG_MASK (~LOAD_COUNTER_MASK)
|
|
#define RESET_DONE_FLAG_SHIFT LOAD_COUNTER_BITS
|
|
#define CHIP_PARITY_SUPPORTED(bp) (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp))
|
|
/*
|
|
* should be run under rtnl lock
|
|
*/
|
|
static inline void bnx2x_set_reset_done(struct bnx2x *bp)
|
|
{
|
|
u32 val = REG_RD(bp, BNX2X_MISC_GEN_REG);
|
|
val &= ~(1 << RESET_DONE_FLAG_SHIFT);
|
|
REG_WR(bp, BNX2X_MISC_GEN_REG, val);
|
|
barrier();
|
|
mmiowb();
|
|
}
|
|
|
|
/*
|
|
* should be run under rtnl lock
|
|
*/
|
|
static inline void bnx2x_set_reset_in_progress(struct bnx2x *bp)
|
|
{
|
|
u32 val = REG_RD(bp, BNX2X_MISC_GEN_REG);
|
|
val |= (1 << 16);
|
|
REG_WR(bp, BNX2X_MISC_GEN_REG, val);
|
|
barrier();
|
|
mmiowb();
|
|
}
|
|
|
|
/*
|
|
* should be run under rtnl lock
|
|
*/
|
|
bool bnx2x_reset_is_done(struct bnx2x *bp)
|
|
{
|
|
u32 val = REG_RD(bp, BNX2X_MISC_GEN_REG);
|
|
DP(NETIF_MSG_HW, "GEN_REG_VAL=0x%08x\n", val);
|
|
return (val & RESET_DONE_FLAG_MASK) ? false : true;
|
|
}
|
|
|
|
/*
|
|
* should be run under rtnl lock
|
|
*/
|
|
inline void bnx2x_inc_load_cnt(struct bnx2x *bp)
|
|
{
|
|
u32 val1, val = REG_RD(bp, BNX2X_MISC_GEN_REG);
|
|
|
|
DP(NETIF_MSG_HW, "Old GEN_REG_VAL=0x%08x\n", val);
|
|
|
|
val1 = ((val & LOAD_COUNTER_MASK) + 1) & LOAD_COUNTER_MASK;
|
|
REG_WR(bp, BNX2X_MISC_GEN_REG, (val & RESET_DONE_FLAG_MASK) | val1);
|
|
barrier();
|
|
mmiowb();
|
|
}
|
|
|
|
/*
|
|
* should be run under rtnl lock
|
|
*/
|
|
u32 bnx2x_dec_load_cnt(struct bnx2x *bp)
|
|
{
|
|
u32 val1, val = REG_RD(bp, BNX2X_MISC_GEN_REG);
|
|
|
|
DP(NETIF_MSG_HW, "Old GEN_REG_VAL=0x%08x\n", val);
|
|
|
|
val1 = ((val & LOAD_COUNTER_MASK) - 1) & LOAD_COUNTER_MASK;
|
|
REG_WR(bp, BNX2X_MISC_GEN_REG, (val & RESET_DONE_FLAG_MASK) | val1);
|
|
barrier();
|
|
mmiowb();
|
|
|
|
return val1;
|
|
}
|
|
|
|
/*
|
|
* should be run under rtnl lock
|
|
*/
|
|
static inline u32 bnx2x_get_load_cnt(struct bnx2x *bp)
|
|
{
|
|
return REG_RD(bp, BNX2X_MISC_GEN_REG) & LOAD_COUNTER_MASK;
|
|
}
|
|
|
|
static inline void bnx2x_clear_load_cnt(struct bnx2x *bp)
|
|
{
|
|
u32 val = REG_RD(bp, BNX2X_MISC_GEN_REG);
|
|
REG_WR(bp, BNX2X_MISC_GEN_REG, val & (~LOAD_COUNTER_MASK));
|
|
}
|
|
|
|
static inline void _print_next_block(int idx, const char *blk)
|
|
{
|
|
if (idx)
|
|
pr_cont(", ");
|
|
pr_cont("%s", blk);
|
|
}
|
|
|
|
static inline int bnx2x_print_blocks_with_parity0(u32 sig, int par_num)
|
|
{
|
|
int i = 0;
|
|
u32 cur_bit = 0;
|
|
for (i = 0; sig; i++) {
|
|
cur_bit = ((u32)0x1 << i);
|
|
if (sig & cur_bit) {
|
|
switch (cur_bit) {
|
|
case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR:
|
|
_print_next_block(par_num++, "BRB");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR:
|
|
_print_next_block(par_num++, "PARSER");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR:
|
|
_print_next_block(par_num++, "TSDM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR:
|
|
_print_next_block(par_num++, "SEARCHER");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR:
|
|
_print_next_block(par_num++, "TSEMI");
|
|
break;
|
|
}
|
|
|
|
/* Clear the bit */
|
|
sig &= ~cur_bit;
|
|
}
|
|
}
|
|
|
|
return par_num;
|
|
}
|
|
|
|
static inline int bnx2x_print_blocks_with_parity1(u32 sig, int par_num)
|
|
{
|
|
int i = 0;
|
|
u32 cur_bit = 0;
|
|
for (i = 0; sig; i++) {
|
|
cur_bit = ((u32)0x1 << i);
|
|
if (sig & cur_bit) {
|
|
switch (cur_bit) {
|
|
case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR:
|
|
_print_next_block(par_num++, "PBCLIENT");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR:
|
|
_print_next_block(par_num++, "QM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR:
|
|
_print_next_block(par_num++, "XSDM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR:
|
|
_print_next_block(par_num++, "XSEMI");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR:
|
|
_print_next_block(par_num++, "DOORBELLQ");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR:
|
|
_print_next_block(par_num++, "VAUX PCI CORE");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR:
|
|
_print_next_block(par_num++, "DEBUG");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR:
|
|
_print_next_block(par_num++, "USDM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR:
|
|
_print_next_block(par_num++, "USEMI");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR:
|
|
_print_next_block(par_num++, "UPB");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR:
|
|
_print_next_block(par_num++, "CSDM");
|
|
break;
|
|
}
|
|
|
|
/* Clear the bit */
|
|
sig &= ~cur_bit;
|
|
}
|
|
}
|
|
|
|
return par_num;
|
|
}
|
|
|
|
static inline int bnx2x_print_blocks_with_parity2(u32 sig, int par_num)
|
|
{
|
|
int i = 0;
|
|
u32 cur_bit = 0;
|
|
for (i = 0; sig; i++) {
|
|
cur_bit = ((u32)0x1 << i);
|
|
if (sig & cur_bit) {
|
|
switch (cur_bit) {
|
|
case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR:
|
|
_print_next_block(par_num++, "CSEMI");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR:
|
|
_print_next_block(par_num++, "PXP");
|
|
break;
|
|
case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR:
|
|
_print_next_block(par_num++,
|
|
"PXPPCICLOCKCLIENT");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR:
|
|
_print_next_block(par_num++, "CFC");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR:
|
|
_print_next_block(par_num++, "CDU");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR:
|
|
_print_next_block(par_num++, "IGU");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR:
|
|
_print_next_block(par_num++, "MISC");
|
|
break;
|
|
}
|
|
|
|
/* Clear the bit */
|
|
sig &= ~cur_bit;
|
|
}
|
|
}
|
|
|
|
return par_num;
|
|
}
|
|
|
|
static inline int bnx2x_print_blocks_with_parity3(u32 sig, int par_num)
|
|
{
|
|
int i = 0;
|
|
u32 cur_bit = 0;
|
|
for (i = 0; sig; i++) {
|
|
cur_bit = ((u32)0x1 << i);
|
|
if (sig & cur_bit) {
|
|
switch (cur_bit) {
|
|
case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY:
|
|
_print_next_block(par_num++, "MCP ROM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY:
|
|
_print_next_block(par_num++, "MCP UMP RX");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY:
|
|
_print_next_block(par_num++, "MCP UMP TX");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY:
|
|
_print_next_block(par_num++, "MCP SCPAD");
|
|
break;
|
|
}
|
|
|
|
/* Clear the bit */
|
|
sig &= ~cur_bit;
|
|
}
|
|
}
|
|
|
|
return par_num;
|
|
}
|
|
|
|
static inline bool bnx2x_parity_attn(struct bnx2x *bp, u32 sig0, u32 sig1,
|
|
u32 sig2, u32 sig3)
|
|
{
|
|
if ((sig0 & HW_PRTY_ASSERT_SET_0) || (sig1 & HW_PRTY_ASSERT_SET_1) ||
|
|
(sig2 & HW_PRTY_ASSERT_SET_2) || (sig3 & HW_PRTY_ASSERT_SET_3)) {
|
|
int par_num = 0;
|
|
DP(NETIF_MSG_HW, "Was parity error: HW block parity attention: "
|
|
"[0]:0x%08x [1]:0x%08x "
|
|
"[2]:0x%08x [3]:0x%08x\n",
|
|
sig0 & HW_PRTY_ASSERT_SET_0,
|
|
sig1 & HW_PRTY_ASSERT_SET_1,
|
|
sig2 & HW_PRTY_ASSERT_SET_2,
|
|
sig3 & HW_PRTY_ASSERT_SET_3);
|
|
printk(KERN_ERR"%s: Parity errors detected in blocks: ",
|
|
bp->dev->name);
|
|
par_num = bnx2x_print_blocks_with_parity0(
|
|
sig0 & HW_PRTY_ASSERT_SET_0, par_num);
|
|
par_num = bnx2x_print_blocks_with_parity1(
|
|
sig1 & HW_PRTY_ASSERT_SET_1, par_num);
|
|
par_num = bnx2x_print_blocks_with_parity2(
|
|
sig2 & HW_PRTY_ASSERT_SET_2, par_num);
|
|
par_num = bnx2x_print_blocks_with_parity3(
|
|
sig3 & HW_PRTY_ASSERT_SET_3, par_num);
|
|
printk("\n");
|
|
return true;
|
|
} else
|
|
return false;
|
|
}
|
|
|
|
bool bnx2x_chk_parity_attn(struct bnx2x *bp)
|
|
{
|
|
struct attn_route attn;
|
|
int port = BP_PORT(bp);
|
|
|
|
attn.sig[0] = REG_RD(bp,
|
|
MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 +
|
|
port*4);
|
|
attn.sig[1] = REG_RD(bp,
|
|
MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 +
|
|
port*4);
|
|
attn.sig[2] = REG_RD(bp,
|
|
MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 +
|
|
port*4);
|
|
attn.sig[3] = REG_RD(bp,
|
|
MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 +
|
|
port*4);
|
|
|
|
return bnx2x_parity_attn(bp, attn.sig[0], attn.sig[1], attn.sig[2],
|
|
attn.sig[3]);
|
|
}
|
|
|
|
static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
|
|
{
|
|
struct attn_route attn, *group_mask;
|
|
int port = BP_PORT(bp);
|
|
int index;
|
|
u32 reg_addr;
|
|
u32 val;
|
|
u32 aeu_mask;
|
|
|
|
/* need to take HW lock because MCP or other port might also
|
|
try to handle this event */
|
|
bnx2x_acquire_alr(bp);
|
|
|
|
if (bnx2x_chk_parity_attn(bp)) {
|
|
bp->recovery_state = BNX2X_RECOVERY_INIT;
|
|
bnx2x_set_reset_in_progress(bp);
|
|
schedule_delayed_work(&bp->reset_task, 0);
|
|
/* Disable HW interrupts */
|
|
bnx2x_int_disable(bp);
|
|
bnx2x_release_alr(bp);
|
|
/* In case of parity errors don't handle attentions so that
|
|
* other function would "see" parity errors.
|
|
*/
|
|
return;
|
|
}
|
|
|
|
attn.sig[0] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port*4);
|
|
attn.sig[1] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port*4);
|
|
attn.sig[2] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port*4);
|
|
attn.sig[3] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port*4);
|
|
DP(NETIF_MSG_HW, "attn: %08x %08x %08x %08x\n",
|
|
attn.sig[0], attn.sig[1], attn.sig[2], attn.sig[3]);
|
|
|
|
for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
|
|
if (deasserted & (1 << index)) {
|
|
group_mask = &bp->attn_group[index];
|
|
|
|
DP(NETIF_MSG_HW, "group[%d]: %08x %08x %08x %08x\n",
|
|
index, group_mask->sig[0], group_mask->sig[1],
|
|
group_mask->sig[2], group_mask->sig[3]);
|
|
|
|
bnx2x_attn_int_deasserted3(bp,
|
|
attn.sig[3] & group_mask->sig[3]);
|
|
bnx2x_attn_int_deasserted1(bp,
|
|
attn.sig[1] & group_mask->sig[1]);
|
|
bnx2x_attn_int_deasserted2(bp,
|
|
attn.sig[2] & group_mask->sig[2]);
|
|
bnx2x_attn_int_deasserted0(bp,
|
|
attn.sig[0] & group_mask->sig[0]);
|
|
}
|
|
}
|
|
|
|
bnx2x_release_alr(bp);
|
|
|
|
reg_addr = (HC_REG_COMMAND_REG + port*32 + COMMAND_REG_ATTN_BITS_CLR);
|
|
|
|
val = ~deasserted;
|
|
DP(NETIF_MSG_HW, "about to mask 0x%08x at HC addr 0x%x\n",
|
|
val, reg_addr);
|
|
REG_WR(bp, reg_addr, val);
|
|
|
|
if (~bp->attn_state & deasserted)
|
|
BNX2X_ERR("IGU ERROR\n");
|
|
|
|
reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
|
|
MISC_REG_AEU_MASK_ATTN_FUNC_0;
|
|
|
|
bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
|
|
aeu_mask = REG_RD(bp, reg_addr);
|
|
|
|
DP(NETIF_MSG_HW, "aeu_mask %x newly deasserted %x\n",
|
|
aeu_mask, deasserted);
|
|
aeu_mask |= (deasserted & 0x3ff);
|
|
DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask);
|
|
|
|
REG_WR(bp, reg_addr, aeu_mask);
|
|
bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
|
|
|
|
DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state);
|
|
bp->attn_state &= ~deasserted;
|
|
DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state);
|
|
}
|
|
|
|
static void bnx2x_attn_int(struct bnx2x *bp)
|
|
{
|
|
/* read local copy of bits */
|
|
u32 attn_bits = le32_to_cpu(bp->def_status_blk->atten_status_block.
|
|
attn_bits);
|
|
u32 attn_ack = le32_to_cpu(bp->def_status_blk->atten_status_block.
|
|
attn_bits_ack);
|
|
u32 attn_state = bp->attn_state;
|
|
|
|
/* look for changed bits */
|
|
u32 asserted = attn_bits & ~attn_ack & ~attn_state;
|
|
u32 deasserted = ~attn_bits & attn_ack & attn_state;
|
|
|
|
DP(NETIF_MSG_HW,
|
|
"attn_bits %x attn_ack %x asserted %x deasserted %x\n",
|
|
attn_bits, attn_ack, asserted, deasserted);
|
|
|
|
if (~(attn_bits ^ attn_ack) & (attn_bits ^ attn_state))
|
|
BNX2X_ERR("BAD attention state\n");
|
|
|
|
/* handle bits that were raised */
|
|
if (asserted)
|
|
bnx2x_attn_int_asserted(bp, asserted);
|
|
|
|
if (deasserted)
|
|
bnx2x_attn_int_deasserted(bp, deasserted);
|
|
}
|
|
|
|
static void bnx2x_sp_task(struct work_struct *work)
|
|
{
|
|
struct bnx2x *bp = container_of(work, struct bnx2x, sp_task.work);
|
|
u16 status;
|
|
|
|
/* Return here if interrupt is disabled */
|
|
if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
|
|
DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
|
|
return;
|
|
}
|
|
|
|
status = bnx2x_update_dsb_idx(bp);
|
|
/* if (status == 0) */
|
|
/* BNX2X_ERR("spurious slowpath interrupt!\n"); */
|
|
|
|
DP(NETIF_MSG_INTR, "got a slowpath interrupt (status 0x%x)\n", status);
|
|
|
|
/* HW attentions */
|
|
if (status & 0x1) {
|
|
bnx2x_attn_int(bp);
|
|
status &= ~0x1;
|
|
}
|
|
|
|
/* CStorm events: STAT_QUERY */
|
|
if (status & 0x2) {
|
|
DP(BNX2X_MSG_SP, "CStorm events: STAT_QUERY\n");
|
|
status &= ~0x2;
|
|
}
|
|
|
|
if (unlikely(status))
|
|
DP(NETIF_MSG_INTR, "got an unknown interrupt! (status 0x%x)\n",
|
|
status);
|
|
|
|
bnx2x_ack_sb(bp, DEF_SB_ID, ATTENTION_ID, le16_to_cpu(bp->def_att_idx),
|
|
IGU_INT_NOP, 1);
|
|
bnx2x_ack_sb(bp, DEF_SB_ID, USTORM_ID, le16_to_cpu(bp->def_u_idx),
|
|
IGU_INT_NOP, 1);
|
|
bnx2x_ack_sb(bp, DEF_SB_ID, CSTORM_ID, le16_to_cpu(bp->def_c_idx),
|
|
IGU_INT_NOP, 1);
|
|
bnx2x_ack_sb(bp, DEF_SB_ID, XSTORM_ID, le16_to_cpu(bp->def_x_idx),
|
|
IGU_INT_NOP, 1);
|
|
bnx2x_ack_sb(bp, DEF_SB_ID, TSTORM_ID, le16_to_cpu(bp->def_t_idx),
|
|
IGU_INT_ENABLE, 1);
|
|
}
|
|
|
|
irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
|
|
{
|
|
struct net_device *dev = dev_instance;
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
/* Return here if interrupt is disabled */
|
|
if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
|
|
DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
bnx2x_ack_sb(bp, DEF_SB_ID, TSTORM_ID, 0, IGU_INT_DISABLE, 0);
|
|
|
|
#ifdef BNX2X_STOP_ON_ERROR
|
|
if (unlikely(bp->panic))
|
|
return IRQ_HANDLED;
|
|
#endif
|
|
|
|
#ifdef BCM_CNIC
|
|
{
|
|
struct cnic_ops *c_ops;
|
|
|
|
rcu_read_lock();
|
|
c_ops = rcu_dereference(bp->cnic_ops);
|
|
if (c_ops)
|
|
c_ops->cnic_handler(bp->cnic_data, NULL);
|
|
rcu_read_unlock();
|
|
}
|
|
#endif
|
|
queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* end of slow path */
|
|
|
|
static void bnx2x_timer(unsigned long data)
|
|
{
|
|
struct bnx2x *bp = (struct bnx2x *) data;
|
|
|
|
if (!netif_running(bp->dev))
|
|
return;
|
|
|
|
if (atomic_read(&bp->intr_sem) != 0)
|
|
goto timer_restart;
|
|
|
|
if (poll) {
|
|
struct bnx2x_fastpath *fp = &bp->fp[0];
|
|
int rc;
|
|
|
|
bnx2x_tx_int(fp);
|
|
rc = bnx2x_rx_int(fp, 1000);
|
|
}
|
|
|
|
if (!BP_NOMCP(bp)) {
|
|
int func = BP_FUNC(bp);
|
|
u32 drv_pulse;
|
|
u32 mcp_pulse;
|
|
|
|
++bp->fw_drv_pulse_wr_seq;
|
|
bp->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK;
|
|
/* TBD - add SYSTEM_TIME */
|
|
drv_pulse = bp->fw_drv_pulse_wr_seq;
|
|
SHMEM_WR(bp, func_mb[func].drv_pulse_mb, drv_pulse);
|
|
|
|
mcp_pulse = (SHMEM_RD(bp, func_mb[func].mcp_pulse_mb) &
|
|
MCP_PULSE_SEQ_MASK);
|
|
/* The delta between driver pulse and mcp response
|
|
* should be 1 (before mcp response) or 0 (after mcp response)
|
|
*/
|
|
if ((drv_pulse != mcp_pulse) &&
|
|
(drv_pulse != ((mcp_pulse + 1) & MCP_PULSE_SEQ_MASK))) {
|
|
/* someone lost a heartbeat... */
|
|
BNX2X_ERR("drv_pulse (0x%x) != mcp_pulse (0x%x)\n",
|
|
drv_pulse, mcp_pulse);
|
|
}
|
|
}
|
|
|
|
if (bp->state == BNX2X_STATE_OPEN)
|
|
bnx2x_stats_handle(bp, STATS_EVENT_UPDATE);
|
|
|
|
timer_restart:
|
|
mod_timer(&bp->timer, jiffies + bp->current_interval);
|
|
}
|
|
|
|
/* end of Statistics */
|
|
|
|
/* nic init */
|
|
|
|
/*
|
|
* nic init service functions
|
|
*/
|
|
|
|
static void bnx2x_zero_sb(struct bnx2x *bp, int sb_id)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
|
|
/* "CSTORM" */
|
|
bnx2x_init_fill(bp, CSEM_REG_FAST_MEMORY +
|
|
CSTORM_SB_HOST_STATUS_BLOCK_U_OFFSET(port, sb_id), 0,
|
|
CSTORM_SB_STATUS_BLOCK_U_SIZE / 4);
|
|
bnx2x_init_fill(bp, CSEM_REG_FAST_MEMORY +
|
|
CSTORM_SB_HOST_STATUS_BLOCK_C_OFFSET(port, sb_id), 0,
|
|
CSTORM_SB_STATUS_BLOCK_C_SIZE / 4);
|
|
}
|
|
|
|
void bnx2x_init_sb(struct bnx2x *bp, struct host_status_block *sb,
|
|
dma_addr_t mapping, int sb_id)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
int func = BP_FUNC(bp);
|
|
int index;
|
|
u64 section;
|
|
|
|
/* USTORM */
|
|
section = ((u64)mapping) + offsetof(struct host_status_block,
|
|
u_status_block);
|
|
sb->u_status_block.status_block_id = sb_id;
|
|
|
|
REG_WR(bp, BAR_CSTRORM_INTMEM +
|
|
CSTORM_SB_HOST_SB_ADDR_U_OFFSET(port, sb_id), U64_LO(section));
|
|
REG_WR(bp, BAR_CSTRORM_INTMEM +
|
|
((CSTORM_SB_HOST_SB_ADDR_U_OFFSET(port, sb_id)) + 4),
|
|
U64_HI(section));
|
|
REG_WR8(bp, BAR_CSTRORM_INTMEM + FP_USB_FUNC_OFF +
|
|
CSTORM_SB_HOST_STATUS_BLOCK_U_OFFSET(port, sb_id), func);
|
|
|
|
for (index = 0; index < HC_USTORM_SB_NUM_INDICES; index++)
|
|
REG_WR16(bp, BAR_CSTRORM_INTMEM +
|
|
CSTORM_SB_HC_DISABLE_U_OFFSET(port, sb_id, index), 1);
|
|
|
|
/* CSTORM */
|
|
section = ((u64)mapping) + offsetof(struct host_status_block,
|
|
c_status_block);
|
|
sb->c_status_block.status_block_id = sb_id;
|
|
|
|
REG_WR(bp, BAR_CSTRORM_INTMEM +
|
|
CSTORM_SB_HOST_SB_ADDR_C_OFFSET(port, sb_id), U64_LO(section));
|
|
REG_WR(bp, BAR_CSTRORM_INTMEM +
|
|
((CSTORM_SB_HOST_SB_ADDR_C_OFFSET(port, sb_id)) + 4),
|
|
U64_HI(section));
|
|
REG_WR8(bp, BAR_CSTRORM_INTMEM + FP_CSB_FUNC_OFF +
|
|
CSTORM_SB_HOST_STATUS_BLOCK_C_OFFSET(port, sb_id), func);
|
|
|
|
for (index = 0; index < HC_CSTORM_SB_NUM_INDICES; index++)
|
|
REG_WR16(bp, BAR_CSTRORM_INTMEM +
|
|
CSTORM_SB_HC_DISABLE_C_OFFSET(port, sb_id, index), 1);
|
|
|
|
bnx2x_ack_sb(bp, sb_id, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
|
|
}
|
|
|
|
static void bnx2x_zero_def_sb(struct bnx2x *bp)
|
|
{
|
|
int func = BP_FUNC(bp);
|
|
|
|
bnx2x_init_fill(bp, TSEM_REG_FAST_MEMORY +
|
|
TSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
|
|
sizeof(struct tstorm_def_status_block)/4);
|
|
bnx2x_init_fill(bp, CSEM_REG_FAST_MEMORY +
|
|
CSTORM_DEF_SB_HOST_STATUS_BLOCK_U_OFFSET(func), 0,
|
|
sizeof(struct cstorm_def_status_block_u)/4);
|
|
bnx2x_init_fill(bp, CSEM_REG_FAST_MEMORY +
|
|
CSTORM_DEF_SB_HOST_STATUS_BLOCK_C_OFFSET(func), 0,
|
|
sizeof(struct cstorm_def_status_block_c)/4);
|
|
bnx2x_init_fill(bp, XSEM_REG_FAST_MEMORY +
|
|
XSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
|
|
sizeof(struct xstorm_def_status_block)/4);
|
|
}
|
|
|
|
static void bnx2x_init_def_sb(struct bnx2x *bp,
|
|
struct host_def_status_block *def_sb,
|
|
dma_addr_t mapping, int sb_id)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
int func = BP_FUNC(bp);
|
|
int index, val, reg_offset;
|
|
u64 section;
|
|
|
|
/* ATTN */
|
|
section = ((u64)mapping) + offsetof(struct host_def_status_block,
|
|
atten_status_block);
|
|
def_sb->atten_status_block.status_block_id = sb_id;
|
|
|
|
bp->attn_state = 0;
|
|
|
|
reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
|
|
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
|
|
|
|
for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
|
|
bp->attn_group[index].sig[0] = REG_RD(bp,
|
|
reg_offset + 0x10*index);
|
|
bp->attn_group[index].sig[1] = REG_RD(bp,
|
|
reg_offset + 0x4 + 0x10*index);
|
|
bp->attn_group[index].sig[2] = REG_RD(bp,
|
|
reg_offset + 0x8 + 0x10*index);
|
|
bp->attn_group[index].sig[3] = REG_RD(bp,
|
|
reg_offset + 0xc + 0x10*index);
|
|
}
|
|
|
|
reg_offset = (port ? HC_REG_ATTN_MSG1_ADDR_L :
|
|
HC_REG_ATTN_MSG0_ADDR_L);
|
|
|
|
REG_WR(bp, reg_offset, U64_LO(section));
|
|
REG_WR(bp, reg_offset + 4, U64_HI(section));
|
|
|
|
reg_offset = (port ? HC_REG_ATTN_NUM_P1 : HC_REG_ATTN_NUM_P0);
|
|
|
|
val = REG_RD(bp, reg_offset);
|
|
val |= sb_id;
|
|
REG_WR(bp, reg_offset, val);
|
|
|
|
/* USTORM */
|
|
section = ((u64)mapping) + offsetof(struct host_def_status_block,
|
|
u_def_status_block);
|
|
def_sb->u_def_status_block.status_block_id = sb_id;
|
|
|
|
REG_WR(bp, BAR_CSTRORM_INTMEM +
|
|
CSTORM_DEF_SB_HOST_SB_ADDR_U_OFFSET(func), U64_LO(section));
|
|
REG_WR(bp, BAR_CSTRORM_INTMEM +
|
|
((CSTORM_DEF_SB_HOST_SB_ADDR_U_OFFSET(func)) + 4),
|
|
U64_HI(section));
|
|
REG_WR8(bp, BAR_CSTRORM_INTMEM + DEF_USB_FUNC_OFF +
|
|
CSTORM_DEF_SB_HOST_STATUS_BLOCK_U_OFFSET(func), func);
|
|
|
|
for (index = 0; index < HC_USTORM_DEF_SB_NUM_INDICES; index++)
|
|
REG_WR16(bp, BAR_CSTRORM_INTMEM +
|
|
CSTORM_DEF_SB_HC_DISABLE_U_OFFSET(func, index), 1);
|
|
|
|
/* CSTORM */
|
|
section = ((u64)mapping) + offsetof(struct host_def_status_block,
|
|
c_def_status_block);
|
|
def_sb->c_def_status_block.status_block_id = sb_id;
|
|
|
|
REG_WR(bp, BAR_CSTRORM_INTMEM +
|
|
CSTORM_DEF_SB_HOST_SB_ADDR_C_OFFSET(func), U64_LO(section));
|
|
REG_WR(bp, BAR_CSTRORM_INTMEM +
|
|
((CSTORM_DEF_SB_HOST_SB_ADDR_C_OFFSET(func)) + 4),
|
|
U64_HI(section));
|
|
REG_WR8(bp, BAR_CSTRORM_INTMEM + DEF_CSB_FUNC_OFF +
|
|
CSTORM_DEF_SB_HOST_STATUS_BLOCK_C_OFFSET(func), func);
|
|
|
|
for (index = 0; index < HC_CSTORM_DEF_SB_NUM_INDICES; index++)
|
|
REG_WR16(bp, BAR_CSTRORM_INTMEM +
|
|
CSTORM_DEF_SB_HC_DISABLE_C_OFFSET(func, index), 1);
|
|
|
|
/* TSTORM */
|
|
section = ((u64)mapping) + offsetof(struct host_def_status_block,
|
|
t_def_status_block);
|
|
def_sb->t_def_status_block.status_block_id = sb_id;
|
|
|
|
REG_WR(bp, BAR_TSTRORM_INTMEM +
|
|
TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
|
|
REG_WR(bp, BAR_TSTRORM_INTMEM +
|
|
((TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4),
|
|
U64_HI(section));
|
|
REG_WR8(bp, BAR_TSTRORM_INTMEM + DEF_TSB_FUNC_OFF +
|
|
TSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
|
|
|
|
for (index = 0; index < HC_TSTORM_DEF_SB_NUM_INDICES; index++)
|
|
REG_WR16(bp, BAR_TSTRORM_INTMEM +
|
|
TSTORM_DEF_SB_HC_DISABLE_OFFSET(func, index), 1);
|
|
|
|
/* XSTORM */
|
|
section = ((u64)mapping) + offsetof(struct host_def_status_block,
|
|
x_def_status_block);
|
|
def_sb->x_def_status_block.status_block_id = sb_id;
|
|
|
|
REG_WR(bp, BAR_XSTRORM_INTMEM +
|
|
XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
|
|
REG_WR(bp, BAR_XSTRORM_INTMEM +
|
|
((XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4),
|
|
U64_HI(section));
|
|
REG_WR8(bp, BAR_XSTRORM_INTMEM + DEF_XSB_FUNC_OFF +
|
|
XSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
|
|
|
|
for (index = 0; index < HC_XSTORM_DEF_SB_NUM_INDICES; index++)
|
|
REG_WR16(bp, BAR_XSTRORM_INTMEM +
|
|
XSTORM_DEF_SB_HC_DISABLE_OFFSET(func, index), 1);
|
|
|
|
bp->stats_pending = 0;
|
|
bp->set_mac_pending = 0;
|
|
|
|
bnx2x_ack_sb(bp, sb_id, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
|
|
}
|
|
|
|
void bnx2x_update_coalesce(struct bnx2x *bp)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
int i;
|
|
|
|
for_each_queue(bp, i) {
|
|
int sb_id = bp->fp[i].sb_id;
|
|
|
|
/* HC_INDEX_U_ETH_RX_CQ_CONS */
|
|
REG_WR8(bp, BAR_CSTRORM_INTMEM +
|
|
CSTORM_SB_HC_TIMEOUT_U_OFFSET(port, sb_id,
|
|
U_SB_ETH_RX_CQ_INDEX),
|
|
bp->rx_ticks/(4 * BNX2X_BTR));
|
|
REG_WR16(bp, BAR_CSTRORM_INTMEM +
|
|
CSTORM_SB_HC_DISABLE_U_OFFSET(port, sb_id,
|
|
U_SB_ETH_RX_CQ_INDEX),
|
|
(bp->rx_ticks/(4 * BNX2X_BTR)) ? 0 : 1);
|
|
|
|
/* HC_INDEX_C_ETH_TX_CQ_CONS */
|
|
REG_WR8(bp, BAR_CSTRORM_INTMEM +
|
|
CSTORM_SB_HC_TIMEOUT_C_OFFSET(port, sb_id,
|
|
C_SB_ETH_TX_CQ_INDEX),
|
|
bp->tx_ticks/(4 * BNX2X_BTR));
|
|
REG_WR16(bp, BAR_CSTRORM_INTMEM +
|
|
CSTORM_SB_HC_DISABLE_C_OFFSET(port, sb_id,
|
|
C_SB_ETH_TX_CQ_INDEX),
|
|
(bp->tx_ticks/(4 * BNX2X_BTR)) ? 0 : 1);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_init_sp_ring(struct bnx2x *bp)
|
|
{
|
|
int func = BP_FUNC(bp);
|
|
|
|
spin_lock_init(&bp->spq_lock);
|
|
|
|
bp->spq_left = MAX_SPQ_PENDING;
|
|
bp->spq_prod_idx = 0;
|
|
bp->dsb_sp_prod = BNX2X_SP_DSB_INDEX;
|
|
bp->spq_prod_bd = bp->spq;
|
|
bp->spq_last_bd = bp->spq_prod_bd + MAX_SP_DESC_CNT;
|
|
|
|
REG_WR(bp, XSEM_REG_FAST_MEMORY + XSTORM_SPQ_PAGE_BASE_OFFSET(func),
|
|
U64_LO(bp->spq_mapping));
|
|
REG_WR(bp,
|
|
XSEM_REG_FAST_MEMORY + XSTORM_SPQ_PAGE_BASE_OFFSET(func) + 4,
|
|
U64_HI(bp->spq_mapping));
|
|
|
|
REG_WR(bp, XSEM_REG_FAST_MEMORY + XSTORM_SPQ_PROD_OFFSET(func),
|
|
bp->spq_prod_idx);
|
|
}
|
|
|
|
static void bnx2x_init_context(struct bnx2x *bp)
|
|
{
|
|
int i;
|
|
|
|
/* Rx */
|
|
for_each_queue(bp, i) {
|
|
struct eth_context *context = bnx2x_sp(bp, context[i].eth);
|
|
struct bnx2x_fastpath *fp = &bp->fp[i];
|
|
u8 cl_id = fp->cl_id;
|
|
|
|
context->ustorm_st_context.common.sb_index_numbers =
|
|
BNX2X_RX_SB_INDEX_NUM;
|
|
context->ustorm_st_context.common.clientId = cl_id;
|
|
context->ustorm_st_context.common.status_block_id = fp->sb_id;
|
|
context->ustorm_st_context.common.flags =
|
|
(USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_MC_ALIGNMENT |
|
|
USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_STATISTICS);
|
|
context->ustorm_st_context.common.statistics_counter_id =
|
|
cl_id;
|
|
context->ustorm_st_context.common.mc_alignment_log_size =
|
|
BNX2X_RX_ALIGN_SHIFT;
|
|
context->ustorm_st_context.common.bd_buff_size =
|
|
bp->rx_buf_size;
|
|
context->ustorm_st_context.common.bd_page_base_hi =
|
|
U64_HI(fp->rx_desc_mapping);
|
|
context->ustorm_st_context.common.bd_page_base_lo =
|
|
U64_LO(fp->rx_desc_mapping);
|
|
if (!fp->disable_tpa) {
|
|
context->ustorm_st_context.common.flags |=
|
|
USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_TPA;
|
|
context->ustorm_st_context.common.sge_buff_size =
|
|
(u16)min_t(u32, SGE_PAGE_SIZE*PAGES_PER_SGE,
|
|
0xffff);
|
|
context->ustorm_st_context.common.sge_page_base_hi =
|
|
U64_HI(fp->rx_sge_mapping);
|
|
context->ustorm_st_context.common.sge_page_base_lo =
|
|
U64_LO(fp->rx_sge_mapping);
|
|
|
|
context->ustorm_st_context.common.max_sges_for_packet =
|
|
SGE_PAGE_ALIGN(bp->dev->mtu) >> SGE_PAGE_SHIFT;
|
|
context->ustorm_st_context.common.max_sges_for_packet =
|
|
((context->ustorm_st_context.common.
|
|
max_sges_for_packet + PAGES_PER_SGE - 1) &
|
|
(~(PAGES_PER_SGE - 1))) >> PAGES_PER_SGE_SHIFT;
|
|
}
|
|
|
|
context->ustorm_ag_context.cdu_usage =
|
|
CDU_RSRVD_VALUE_TYPE_A(HW_CID(bp, i),
|
|
CDU_REGION_NUMBER_UCM_AG,
|
|
ETH_CONNECTION_TYPE);
|
|
|
|
context->xstorm_ag_context.cdu_reserved =
|
|
CDU_RSRVD_VALUE_TYPE_A(HW_CID(bp, i),
|
|
CDU_REGION_NUMBER_XCM_AG,
|
|
ETH_CONNECTION_TYPE);
|
|
}
|
|
|
|
/* Tx */
|
|
for_each_queue(bp, i) {
|
|
struct bnx2x_fastpath *fp = &bp->fp[i];
|
|
struct eth_context *context =
|
|
bnx2x_sp(bp, context[i].eth);
|
|
|
|
context->cstorm_st_context.sb_index_number =
|
|
C_SB_ETH_TX_CQ_INDEX;
|
|
context->cstorm_st_context.status_block_id = fp->sb_id;
|
|
|
|
context->xstorm_st_context.tx_bd_page_base_hi =
|
|
U64_HI(fp->tx_desc_mapping);
|
|
context->xstorm_st_context.tx_bd_page_base_lo =
|
|
U64_LO(fp->tx_desc_mapping);
|
|
context->xstorm_st_context.statistics_data = (fp->cl_id |
|
|
XSTORM_ETH_ST_CONTEXT_STATISTICS_ENABLE);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_init_ind_table(struct bnx2x *bp)
|
|
{
|
|
int func = BP_FUNC(bp);
|
|
int i;
|
|
|
|
if (bp->multi_mode == ETH_RSS_MODE_DISABLED)
|
|
return;
|
|
|
|
DP(NETIF_MSG_IFUP,
|
|
"Initializing indirection table multi_mode %d\n", bp->multi_mode);
|
|
for (i = 0; i < TSTORM_INDIRECTION_TABLE_SIZE; i++)
|
|
REG_WR8(bp, BAR_TSTRORM_INTMEM +
|
|
TSTORM_INDIRECTION_TABLE_OFFSET(func) + i,
|
|
bp->fp->cl_id + (i % bp->num_queues));
|
|
}
|
|
|
|
void bnx2x_set_client_config(struct bnx2x *bp)
|
|
{
|
|
struct tstorm_eth_client_config tstorm_client = {0};
|
|
int port = BP_PORT(bp);
|
|
int i;
|
|
|
|
tstorm_client.mtu = bp->dev->mtu;
|
|
tstorm_client.config_flags =
|
|
(TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE |
|
|
TSTORM_ETH_CLIENT_CONFIG_E1HOV_REM_ENABLE);
|
|
#ifdef BCM_VLAN
|
|
if (bp->rx_mode && bp->vlgrp && (bp->flags & HW_VLAN_RX_FLAG)) {
|
|
tstorm_client.config_flags |=
|
|
TSTORM_ETH_CLIENT_CONFIG_VLAN_REM_ENABLE;
|
|
DP(NETIF_MSG_IFUP, "vlan removal enabled\n");
|
|
}
|
|
#endif
|
|
|
|
for_each_queue(bp, i) {
|
|
tstorm_client.statistics_counter_id = bp->fp[i].cl_id;
|
|
|
|
REG_WR(bp, BAR_TSTRORM_INTMEM +
|
|
TSTORM_CLIENT_CONFIG_OFFSET(port, bp->fp[i].cl_id),
|
|
((u32 *)&tstorm_client)[0]);
|
|
REG_WR(bp, BAR_TSTRORM_INTMEM +
|
|
TSTORM_CLIENT_CONFIG_OFFSET(port, bp->fp[i].cl_id) + 4,
|
|
((u32 *)&tstorm_client)[1]);
|
|
}
|
|
|
|
DP(BNX2X_MSG_OFF, "tstorm_client: 0x%08x 0x%08x\n",
|
|
((u32 *)&tstorm_client)[0], ((u32 *)&tstorm_client)[1]);
|
|
}
|
|
|
|
void bnx2x_set_storm_rx_mode(struct bnx2x *bp)
|
|
{
|
|
struct tstorm_eth_mac_filter_config tstorm_mac_filter = {0};
|
|
int mode = bp->rx_mode;
|
|
int mask = bp->rx_mode_cl_mask;
|
|
int func = BP_FUNC(bp);
|
|
int port = BP_PORT(bp);
|
|
int i;
|
|
/* All but management unicast packets should pass to the host as well */
|
|
u32 llh_mask =
|
|
NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_BRCST |
|
|
NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_MLCST |
|
|
NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_VLAN |
|
|
NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_NO_VLAN;
|
|
|
|
DP(NETIF_MSG_IFUP, "rx mode %d mask 0x%x\n", mode, mask);
|
|
|
|
switch (mode) {
|
|
case BNX2X_RX_MODE_NONE: /* no Rx */
|
|
tstorm_mac_filter.ucast_drop_all = mask;
|
|
tstorm_mac_filter.mcast_drop_all = mask;
|
|
tstorm_mac_filter.bcast_drop_all = mask;
|
|
break;
|
|
|
|
case BNX2X_RX_MODE_NORMAL:
|
|
tstorm_mac_filter.bcast_accept_all = mask;
|
|
break;
|
|
|
|
case BNX2X_RX_MODE_ALLMULTI:
|
|
tstorm_mac_filter.mcast_accept_all = mask;
|
|
tstorm_mac_filter.bcast_accept_all = mask;
|
|
break;
|
|
|
|
case BNX2X_RX_MODE_PROMISC:
|
|
tstorm_mac_filter.ucast_accept_all = mask;
|
|
tstorm_mac_filter.mcast_accept_all = mask;
|
|
tstorm_mac_filter.bcast_accept_all = mask;
|
|
/* pass management unicast packets as well */
|
|
llh_mask |= NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST;
|
|
break;
|
|
|
|
default:
|
|
BNX2X_ERR("BAD rx mode (%d)\n", mode);
|
|
break;
|
|
}
|
|
|
|
REG_WR(bp,
|
|
(port ? NIG_REG_LLH1_BRB1_DRV_MASK : NIG_REG_LLH0_BRB1_DRV_MASK),
|
|
llh_mask);
|
|
|
|
for (i = 0; i < sizeof(struct tstorm_eth_mac_filter_config)/4; i++) {
|
|
REG_WR(bp, BAR_TSTRORM_INTMEM +
|
|
TSTORM_MAC_FILTER_CONFIG_OFFSET(func) + i * 4,
|
|
((u32 *)&tstorm_mac_filter)[i]);
|
|
|
|
/* DP(NETIF_MSG_IFUP, "tstorm_mac_filter[%d]: 0x%08x\n", i,
|
|
((u32 *)&tstorm_mac_filter)[i]); */
|
|
}
|
|
|
|
if (mode != BNX2X_RX_MODE_NONE)
|
|
bnx2x_set_client_config(bp);
|
|
}
|
|
|
|
static void bnx2x_init_internal_common(struct bnx2x *bp)
|
|
{
|
|
int i;
|
|
|
|
/* Zero this manually as its initialization is
|
|
currently missing in the initTool */
|
|
for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++)
|
|
REG_WR(bp, BAR_USTRORM_INTMEM +
|
|
USTORM_AGG_DATA_OFFSET + i * 4, 0);
|
|
}
|
|
|
|
static void bnx2x_init_internal_port(struct bnx2x *bp)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
|
|
REG_WR(bp,
|
|
BAR_CSTRORM_INTMEM + CSTORM_HC_BTR_U_OFFSET(port), BNX2X_BTR);
|
|
REG_WR(bp,
|
|
BAR_CSTRORM_INTMEM + CSTORM_HC_BTR_C_OFFSET(port), BNX2X_BTR);
|
|
REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
|
|
REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
|
|
}
|
|
|
|
static void bnx2x_init_internal_func(struct bnx2x *bp)
|
|
{
|
|
struct tstorm_eth_function_common_config tstorm_config = {0};
|
|
struct stats_indication_flags stats_flags = {0};
|
|
int port = BP_PORT(bp);
|
|
int func = BP_FUNC(bp);
|
|
int i, j;
|
|
u32 offset;
|
|
u16 max_agg_size;
|
|
|
|
tstorm_config.config_flags = RSS_FLAGS(bp);
|
|
|
|
if (is_multi(bp))
|
|
tstorm_config.rss_result_mask = MULTI_MASK;
|
|
|
|
/* Enable TPA if needed */
|
|
if (bp->flags & TPA_ENABLE_FLAG)
|
|
tstorm_config.config_flags |=
|
|
TSTORM_ETH_FUNCTION_COMMON_CONFIG_ENABLE_TPA;
|
|
|
|
if (IS_E1HMF(bp))
|
|
tstorm_config.config_flags |=
|
|
TSTORM_ETH_FUNCTION_COMMON_CONFIG_E1HOV_IN_CAM;
|
|
|
|
tstorm_config.leading_client_id = BP_L_ID(bp);
|
|
|
|
REG_WR(bp, BAR_TSTRORM_INTMEM +
|
|
TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(func),
|
|
(*(u32 *)&tstorm_config));
|
|
|
|
bp->rx_mode = BNX2X_RX_MODE_NONE; /* no rx until link is up */
|
|
bp->rx_mode_cl_mask = (1 << BP_L_ID(bp));
|
|
bnx2x_set_storm_rx_mode(bp);
|
|
|
|
for_each_queue(bp, i) {
|
|
u8 cl_id = bp->fp[i].cl_id;
|
|
|
|
/* reset xstorm per client statistics */
|
|
offset = BAR_XSTRORM_INTMEM +
|
|
XSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cl_id);
|
|
for (j = 0;
|
|
j < sizeof(struct xstorm_per_client_stats) / 4; j++)
|
|
REG_WR(bp, offset + j*4, 0);
|
|
|
|
/* reset tstorm per client statistics */
|
|
offset = BAR_TSTRORM_INTMEM +
|
|
TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cl_id);
|
|
for (j = 0;
|
|
j < sizeof(struct tstorm_per_client_stats) / 4; j++)
|
|
REG_WR(bp, offset + j*4, 0);
|
|
|
|
/* reset ustorm per client statistics */
|
|
offset = BAR_USTRORM_INTMEM +
|
|
USTORM_PER_COUNTER_ID_STATS_OFFSET(port, cl_id);
|
|
for (j = 0;
|
|
j < sizeof(struct ustorm_per_client_stats) / 4; j++)
|
|
REG_WR(bp, offset + j*4, 0);
|
|
}
|
|
|
|
/* Init statistics related context */
|
|
stats_flags.collect_eth = 1;
|
|
|
|
REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(func),
|
|
((u32 *)&stats_flags)[0]);
|
|
REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(func) + 4,
|
|
((u32 *)&stats_flags)[1]);
|
|
|
|
REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(func),
|
|
((u32 *)&stats_flags)[0]);
|
|
REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(func) + 4,
|
|
((u32 *)&stats_flags)[1]);
|
|
|
|
REG_WR(bp, BAR_USTRORM_INTMEM + USTORM_STATS_FLAGS_OFFSET(func),
|
|
((u32 *)&stats_flags)[0]);
|
|
REG_WR(bp, BAR_USTRORM_INTMEM + USTORM_STATS_FLAGS_OFFSET(func) + 4,
|
|
((u32 *)&stats_flags)[1]);
|
|
|
|
REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(func),
|
|
((u32 *)&stats_flags)[0]);
|
|
REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(func) + 4,
|
|
((u32 *)&stats_flags)[1]);
|
|
|
|
REG_WR(bp, BAR_XSTRORM_INTMEM +
|
|
XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
|
|
U64_LO(bnx2x_sp_mapping(bp, fw_stats)));
|
|
REG_WR(bp, BAR_XSTRORM_INTMEM +
|
|
XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
|
|
U64_HI(bnx2x_sp_mapping(bp, fw_stats)));
|
|
|
|
REG_WR(bp, BAR_TSTRORM_INTMEM +
|
|
TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
|
|
U64_LO(bnx2x_sp_mapping(bp, fw_stats)));
|
|
REG_WR(bp, BAR_TSTRORM_INTMEM +
|
|
TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
|
|
U64_HI(bnx2x_sp_mapping(bp, fw_stats)));
|
|
|
|
REG_WR(bp, BAR_USTRORM_INTMEM +
|
|
USTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
|
|
U64_LO(bnx2x_sp_mapping(bp, fw_stats)));
|
|
REG_WR(bp, BAR_USTRORM_INTMEM +
|
|
USTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
|
|
U64_HI(bnx2x_sp_mapping(bp, fw_stats)));
|
|
|
|
if (CHIP_IS_E1H(bp)) {
|
|
REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNCTION_MODE_OFFSET,
|
|
IS_E1HMF(bp));
|
|
REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_FUNCTION_MODE_OFFSET,
|
|
IS_E1HMF(bp));
|
|
REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_FUNCTION_MODE_OFFSET,
|
|
IS_E1HMF(bp));
|
|
REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNCTION_MODE_OFFSET,
|
|
IS_E1HMF(bp));
|
|
|
|
REG_WR16(bp, BAR_XSTRORM_INTMEM + XSTORM_E1HOV_OFFSET(func),
|
|
bp->e1hov);
|
|
}
|
|
|
|
/* Init CQ ring mapping and aggregation size, the FW limit is 8 frags */
|
|
max_agg_size = min_t(u32, (min_t(u32, 8, MAX_SKB_FRAGS) *
|
|
SGE_PAGE_SIZE * PAGES_PER_SGE), 0xffff);
|
|
for_each_queue(bp, i) {
|
|
struct bnx2x_fastpath *fp = &bp->fp[i];
|
|
|
|
REG_WR(bp, BAR_USTRORM_INTMEM +
|
|
USTORM_CQE_PAGE_BASE_OFFSET(port, fp->cl_id),
|
|
U64_LO(fp->rx_comp_mapping));
|
|
REG_WR(bp, BAR_USTRORM_INTMEM +
|
|
USTORM_CQE_PAGE_BASE_OFFSET(port, fp->cl_id) + 4,
|
|
U64_HI(fp->rx_comp_mapping));
|
|
|
|
/* Next page */
|
|
REG_WR(bp, BAR_USTRORM_INTMEM +
|
|
USTORM_CQE_PAGE_NEXT_OFFSET(port, fp->cl_id),
|
|
U64_LO(fp->rx_comp_mapping + BCM_PAGE_SIZE));
|
|
REG_WR(bp, BAR_USTRORM_INTMEM +
|
|
USTORM_CQE_PAGE_NEXT_OFFSET(port, fp->cl_id) + 4,
|
|
U64_HI(fp->rx_comp_mapping + BCM_PAGE_SIZE));
|
|
|
|
REG_WR16(bp, BAR_USTRORM_INTMEM +
|
|
USTORM_MAX_AGG_SIZE_OFFSET(port, fp->cl_id),
|
|
max_agg_size);
|
|
}
|
|
|
|
/* dropless flow control */
|
|
if (CHIP_IS_E1H(bp)) {
|
|
struct ustorm_eth_rx_pause_data_e1h rx_pause = {0};
|
|
|
|
rx_pause.bd_thr_low = 250;
|
|
rx_pause.cqe_thr_low = 250;
|
|
rx_pause.cos = 1;
|
|
rx_pause.sge_thr_low = 0;
|
|
rx_pause.bd_thr_high = 350;
|
|
rx_pause.cqe_thr_high = 350;
|
|
rx_pause.sge_thr_high = 0;
|
|
|
|
for_each_queue(bp, i) {
|
|
struct bnx2x_fastpath *fp = &bp->fp[i];
|
|
|
|
if (!fp->disable_tpa) {
|
|
rx_pause.sge_thr_low = 150;
|
|
rx_pause.sge_thr_high = 250;
|
|
}
|
|
|
|
|
|
offset = BAR_USTRORM_INTMEM +
|
|
USTORM_ETH_RING_PAUSE_DATA_OFFSET(port,
|
|
fp->cl_id);
|
|
for (j = 0;
|
|
j < sizeof(struct ustorm_eth_rx_pause_data_e1h)/4;
|
|
j++)
|
|
REG_WR(bp, offset + j*4,
|
|
((u32 *)&rx_pause)[j]);
|
|
}
|
|
}
|
|
|
|
memset(&(bp->cmng), 0, sizeof(struct cmng_struct_per_port));
|
|
|
|
/* Init rate shaping and fairness contexts */
|
|
if (IS_E1HMF(bp)) {
|
|
int vn;
|
|
|
|
/* During init there is no active link
|
|
Until link is up, set link rate to 10Gbps */
|
|
bp->link_vars.line_speed = SPEED_10000;
|
|
bnx2x_init_port_minmax(bp);
|
|
|
|
if (!BP_NOMCP(bp))
|
|
bp->mf_config =
|
|
SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
|
|
bnx2x_calc_vn_weight_sum(bp);
|
|
|
|
for (vn = VN_0; vn < E1HVN_MAX; vn++)
|
|
bnx2x_init_vn_minmax(bp, 2*vn + port);
|
|
|
|
/* Enable rate shaping and fairness */
|
|
bp->cmng.flags.cmng_enables |=
|
|
CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN;
|
|
|
|
} else {
|
|
/* rate shaping and fairness are disabled */
|
|
DP(NETIF_MSG_IFUP,
|
|
"single function mode minmax will be disabled\n");
|
|
}
|
|
|
|
|
|
/* Store cmng structures to internal memory */
|
|
if (bp->port.pmf)
|
|
for (i = 0; i < sizeof(struct cmng_struct_per_port) / 4; i++)
|
|
REG_WR(bp, BAR_XSTRORM_INTMEM +
|
|
XSTORM_CMNG_PER_PORT_VARS_OFFSET(port) + i * 4,
|
|
((u32 *)(&bp->cmng))[i]);
|
|
}
|
|
|
|
static void bnx2x_init_internal(struct bnx2x *bp, u32 load_code)
|
|
{
|
|
switch (load_code) {
|
|
case FW_MSG_CODE_DRV_LOAD_COMMON:
|
|
bnx2x_init_internal_common(bp);
|
|
/* no break */
|
|
|
|
case FW_MSG_CODE_DRV_LOAD_PORT:
|
|
bnx2x_init_internal_port(bp);
|
|
/* no break */
|
|
|
|
case FW_MSG_CODE_DRV_LOAD_FUNCTION:
|
|
bnx2x_init_internal_func(bp);
|
|
break;
|
|
|
|
default:
|
|
BNX2X_ERR("Unknown load_code (0x%x) from MCP\n", load_code);
|
|
break;
|
|
}
|
|
}
|
|
|
|
void bnx2x_nic_init(struct bnx2x *bp, u32 load_code)
|
|
{
|
|
int i;
|
|
|
|
for_each_queue(bp, i) {
|
|
struct bnx2x_fastpath *fp = &bp->fp[i];
|
|
|
|
fp->bp = bp;
|
|
fp->state = BNX2X_FP_STATE_CLOSED;
|
|
fp->index = i;
|
|
fp->cl_id = BP_L_ID(bp) + i;
|
|
#ifdef BCM_CNIC
|
|
fp->sb_id = fp->cl_id + 1;
|
|
#else
|
|
fp->sb_id = fp->cl_id;
|
|
#endif
|
|
DP(NETIF_MSG_IFUP,
|
|
"queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d sb %d\n",
|
|
i, bp, fp->status_blk, fp->cl_id, fp->sb_id);
|
|
bnx2x_init_sb(bp, fp->status_blk, fp->status_blk_mapping,
|
|
fp->sb_id);
|
|
bnx2x_update_fpsb_idx(fp);
|
|
}
|
|
|
|
/* ensure status block indices were read */
|
|
rmb();
|
|
|
|
|
|
bnx2x_init_def_sb(bp, bp->def_status_blk, bp->def_status_blk_mapping,
|
|
DEF_SB_ID);
|
|
bnx2x_update_dsb_idx(bp);
|
|
bnx2x_update_coalesce(bp);
|
|
bnx2x_init_rx_rings(bp);
|
|
bnx2x_init_tx_ring(bp);
|
|
bnx2x_init_sp_ring(bp);
|
|
bnx2x_init_context(bp);
|
|
bnx2x_init_internal(bp, load_code);
|
|
bnx2x_init_ind_table(bp);
|
|
bnx2x_stats_init(bp);
|
|
|
|
/* At this point, we are ready for interrupts */
|
|
atomic_set(&bp->intr_sem, 0);
|
|
|
|
/* flush all before enabling interrupts */
|
|
mb();
|
|
mmiowb();
|
|
|
|
bnx2x_int_enable(bp);
|
|
|
|
/* Check for SPIO5 */
|
|
bnx2x_attn_int_deasserted0(bp,
|
|
REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + BP_PORT(bp)*4) &
|
|
AEU_INPUTS_ATTN_BITS_SPIO5);
|
|
}
|
|
|
|
/* end of nic init */
|
|
|
|
/*
|
|
* gzip service functions
|
|
*/
|
|
|
|
static int bnx2x_gunzip_init(struct bnx2x *bp)
|
|
{
|
|
bp->gunzip_buf = dma_alloc_coherent(&bp->pdev->dev, FW_BUF_SIZE,
|
|
&bp->gunzip_mapping, GFP_KERNEL);
|
|
if (bp->gunzip_buf == NULL)
|
|
goto gunzip_nomem1;
|
|
|
|
bp->strm = kmalloc(sizeof(*bp->strm), GFP_KERNEL);
|
|
if (bp->strm == NULL)
|
|
goto gunzip_nomem2;
|
|
|
|
bp->strm->workspace = kmalloc(zlib_inflate_workspacesize(),
|
|
GFP_KERNEL);
|
|
if (bp->strm->workspace == NULL)
|
|
goto gunzip_nomem3;
|
|
|
|
return 0;
|
|
|
|
gunzip_nomem3:
|
|
kfree(bp->strm);
|
|
bp->strm = NULL;
|
|
|
|
gunzip_nomem2:
|
|
dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf,
|
|
bp->gunzip_mapping);
|
|
bp->gunzip_buf = NULL;
|
|
|
|
gunzip_nomem1:
|
|
netdev_err(bp->dev, "Cannot allocate firmware buffer for"
|
|
" un-compression\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void bnx2x_gunzip_end(struct bnx2x *bp)
|
|
{
|
|
kfree(bp->strm->workspace);
|
|
|
|
kfree(bp->strm);
|
|
bp->strm = NULL;
|
|
|
|
if (bp->gunzip_buf) {
|
|
dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf,
|
|
bp->gunzip_mapping);
|
|
bp->gunzip_buf = NULL;
|
|
}
|
|
}
|
|
|
|
static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len)
|
|
{
|
|
int n, rc;
|
|
|
|
/* check gzip header */
|
|
if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED)) {
|
|
BNX2X_ERR("Bad gzip header\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
n = 10;
|
|
|
|
#define FNAME 0x8
|
|
|
|
if (zbuf[3] & FNAME)
|
|
while ((zbuf[n++] != 0) && (n < len));
|
|
|
|
bp->strm->next_in = (typeof(bp->strm->next_in))zbuf + n;
|
|
bp->strm->avail_in = len - n;
|
|
bp->strm->next_out = bp->gunzip_buf;
|
|
bp->strm->avail_out = FW_BUF_SIZE;
|
|
|
|
rc = zlib_inflateInit2(bp->strm, -MAX_WBITS);
|
|
if (rc != Z_OK)
|
|
return rc;
|
|
|
|
rc = zlib_inflate(bp->strm, Z_FINISH);
|
|
if ((rc != Z_OK) && (rc != Z_STREAM_END))
|
|
netdev_err(bp->dev, "Firmware decompression error: %s\n",
|
|
bp->strm->msg);
|
|
|
|
bp->gunzip_outlen = (FW_BUF_SIZE - bp->strm->avail_out);
|
|
if (bp->gunzip_outlen & 0x3)
|
|
netdev_err(bp->dev, "Firmware decompression error:"
|
|
" gunzip_outlen (%d) not aligned\n",
|
|
bp->gunzip_outlen);
|
|
bp->gunzip_outlen >>= 2;
|
|
|
|
zlib_inflateEnd(bp->strm);
|
|
|
|
if (rc == Z_STREAM_END)
|
|
return 0;
|
|
|
|
return rc;
|
|
}
|
|
|
|
/* nic load/unload */
|
|
|
|
/*
|
|
* General service functions
|
|
*/
|
|
|
|
/* send a NIG loopback debug packet */
|
|
static void bnx2x_lb_pckt(struct bnx2x *bp)
|
|
{
|
|
u32 wb_write[3];
|
|
|
|
/* Ethernet source and destination addresses */
|
|
wb_write[0] = 0x55555555;
|
|
wb_write[1] = 0x55555555;
|
|
wb_write[2] = 0x20; /* SOP */
|
|
REG_WR_DMAE(bp, NIG_REG_DEBUG_PACKET_LB, wb_write, 3);
|
|
|
|
/* NON-IP protocol */
|
|
wb_write[0] = 0x09000000;
|
|
wb_write[1] = 0x55555555;
|
|
wb_write[2] = 0x10; /* EOP, eop_bvalid = 0 */
|
|
REG_WR_DMAE(bp, NIG_REG_DEBUG_PACKET_LB, wb_write, 3);
|
|
}
|
|
|
|
/* some of the internal memories
|
|
* are not directly readable from the driver
|
|
* to test them we send debug packets
|
|
*/
|
|
static int bnx2x_int_mem_test(struct bnx2x *bp)
|
|
{
|
|
int factor;
|
|
int count, i;
|
|
u32 val = 0;
|
|
|
|
if (CHIP_REV_IS_FPGA(bp))
|
|
factor = 120;
|
|
else if (CHIP_REV_IS_EMUL(bp))
|
|
factor = 200;
|
|
else
|
|
factor = 1;
|
|
|
|
DP(NETIF_MSG_HW, "start part1\n");
|
|
|
|
/* Disable inputs of parser neighbor blocks */
|
|
REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0);
|
|
REG_WR(bp, TCM_REG_PRS_IFEN, 0x0);
|
|
REG_WR(bp, CFC_REG_DEBUG0, 0x1);
|
|
REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0);
|
|
|
|
/* Write 0 to parser credits for CFC search request */
|
|
REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
|
|
|
|
/* send Ethernet packet */
|
|
bnx2x_lb_pckt(bp);
|
|
|
|
/* TODO do i reset NIG statistic? */
|
|
/* Wait until NIG register shows 1 packet of size 0x10 */
|
|
count = 1000 * factor;
|
|
while (count) {
|
|
|
|
bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2);
|
|
val = *bnx2x_sp(bp, wb_data[0]);
|
|
if (val == 0x10)
|
|
break;
|
|
|
|
msleep(10);
|
|
count--;
|
|
}
|
|
if (val != 0x10) {
|
|
BNX2X_ERR("NIG timeout val = 0x%x\n", val);
|
|
return -1;
|
|
}
|
|
|
|
/* Wait until PRS register shows 1 packet */
|
|
count = 1000 * factor;
|
|
while (count) {
|
|
val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS);
|
|
if (val == 1)
|
|
break;
|
|
|
|
msleep(10);
|
|
count--;
|
|
}
|
|
if (val != 0x1) {
|
|
BNX2X_ERR("PRS timeout val = 0x%x\n", val);
|
|
return -2;
|
|
}
|
|
|
|
/* Reset and init BRB, PRS */
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03);
|
|
msleep(50);
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
|
|
msleep(50);
|
|
bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
|
|
bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
|
|
|
|
DP(NETIF_MSG_HW, "part2\n");
|
|
|
|
/* Disable inputs of parser neighbor blocks */
|
|
REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0);
|
|
REG_WR(bp, TCM_REG_PRS_IFEN, 0x0);
|
|
REG_WR(bp, CFC_REG_DEBUG0, 0x1);
|
|
REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0);
|
|
|
|
/* Write 0 to parser credits for CFC search request */
|
|
REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
|
|
|
|
/* send 10 Ethernet packets */
|
|
for (i = 0; i < 10; i++)
|
|
bnx2x_lb_pckt(bp);
|
|
|
|
/* Wait until NIG register shows 10 + 1
|
|
packets of size 11*0x10 = 0xb0 */
|
|
count = 1000 * factor;
|
|
while (count) {
|
|
|
|
bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2);
|
|
val = *bnx2x_sp(bp, wb_data[0]);
|
|
if (val == 0xb0)
|
|
break;
|
|
|
|
msleep(10);
|
|
count--;
|
|
}
|
|
if (val != 0xb0) {
|
|
BNX2X_ERR("NIG timeout val = 0x%x\n", val);
|
|
return -3;
|
|
}
|
|
|
|
/* Wait until PRS register shows 2 packets */
|
|
val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS);
|
|
if (val != 2)
|
|
BNX2X_ERR("PRS timeout val = 0x%x\n", val);
|
|
|
|
/* Write 1 to parser credits for CFC search request */
|
|
REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x1);
|
|
|
|
/* Wait until PRS register shows 3 packets */
|
|
msleep(10 * factor);
|
|
/* Wait until NIG register shows 1 packet of size 0x10 */
|
|
val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS);
|
|
if (val != 3)
|
|
BNX2X_ERR("PRS timeout val = 0x%x\n", val);
|
|
|
|
/* clear NIG EOP FIFO */
|
|
for (i = 0; i < 11; i++)
|
|
REG_RD(bp, NIG_REG_INGRESS_EOP_LB_FIFO);
|
|
val = REG_RD(bp, NIG_REG_INGRESS_EOP_LB_EMPTY);
|
|
if (val != 1) {
|
|
BNX2X_ERR("clear of NIG failed\n");
|
|
return -4;
|
|
}
|
|
|
|
/* Reset and init BRB, PRS, NIG */
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03);
|
|
msleep(50);
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
|
|
msleep(50);
|
|
bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
|
|
bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
|
|
#ifndef BCM_CNIC
|
|
/* set NIC mode */
|
|
REG_WR(bp, PRS_REG_NIC_MODE, 1);
|
|
#endif
|
|
|
|
/* Enable inputs of parser neighbor blocks */
|
|
REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x7fffffff);
|
|
REG_WR(bp, TCM_REG_PRS_IFEN, 0x1);
|
|
REG_WR(bp, CFC_REG_DEBUG0, 0x0);
|
|
REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x1);
|
|
|
|
DP(NETIF_MSG_HW, "done\n");
|
|
|
|
return 0; /* OK */
|
|
}
|
|
|
|
static void enable_blocks_attention(struct bnx2x *bp)
|
|
{
|
|
REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0);
|
|
REG_WR(bp, PXP_REG_PXP_INT_MASK_1, 0);
|
|
REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0);
|
|
REG_WR(bp, CFC_REG_CFC_INT_MASK, 0);
|
|
REG_WR(bp, QM_REG_QM_INT_MASK, 0);
|
|
REG_WR(bp, TM_REG_TM_INT_MASK, 0);
|
|
REG_WR(bp, XSDM_REG_XSDM_INT_MASK_0, 0);
|
|
REG_WR(bp, XSDM_REG_XSDM_INT_MASK_1, 0);
|
|
REG_WR(bp, XCM_REG_XCM_INT_MASK, 0);
|
|
/* REG_WR(bp, XSEM_REG_XSEM_INT_MASK_0, 0); */
|
|
/* REG_WR(bp, XSEM_REG_XSEM_INT_MASK_1, 0); */
|
|
REG_WR(bp, USDM_REG_USDM_INT_MASK_0, 0);
|
|
REG_WR(bp, USDM_REG_USDM_INT_MASK_1, 0);
|
|
REG_WR(bp, UCM_REG_UCM_INT_MASK, 0);
|
|
/* REG_WR(bp, USEM_REG_USEM_INT_MASK_0, 0); */
|
|
/* REG_WR(bp, USEM_REG_USEM_INT_MASK_1, 0); */
|
|
REG_WR(bp, GRCBASE_UPB + PB_REG_PB_INT_MASK, 0);
|
|
REG_WR(bp, CSDM_REG_CSDM_INT_MASK_0, 0);
|
|
REG_WR(bp, CSDM_REG_CSDM_INT_MASK_1, 0);
|
|
REG_WR(bp, CCM_REG_CCM_INT_MASK, 0);
|
|
/* REG_WR(bp, CSEM_REG_CSEM_INT_MASK_0, 0); */
|
|
/* REG_WR(bp, CSEM_REG_CSEM_INT_MASK_1, 0); */
|
|
if (CHIP_REV_IS_FPGA(bp))
|
|
REG_WR(bp, PXP2_REG_PXP2_INT_MASK_0, 0x580000);
|
|
else
|
|
REG_WR(bp, PXP2_REG_PXP2_INT_MASK_0, 0x480000);
|
|
REG_WR(bp, TSDM_REG_TSDM_INT_MASK_0, 0);
|
|
REG_WR(bp, TSDM_REG_TSDM_INT_MASK_1, 0);
|
|
REG_WR(bp, TCM_REG_TCM_INT_MASK, 0);
|
|
/* REG_WR(bp, TSEM_REG_TSEM_INT_MASK_0, 0); */
|
|
/* REG_WR(bp, TSEM_REG_TSEM_INT_MASK_1, 0); */
|
|
REG_WR(bp, CDU_REG_CDU_INT_MASK, 0);
|
|
REG_WR(bp, DMAE_REG_DMAE_INT_MASK, 0);
|
|
/* REG_WR(bp, MISC_REG_MISC_INT_MASK, 0); */
|
|
REG_WR(bp, PBF_REG_PBF_INT_MASK, 0X18); /* bit 3,4 masked */
|
|
}
|
|
|
|
static const struct {
|
|
u32 addr;
|
|
u32 mask;
|
|
} bnx2x_parity_mask[] = {
|
|
{PXP_REG_PXP_PRTY_MASK, 0xffffffff},
|
|
{PXP2_REG_PXP2_PRTY_MASK_0, 0xffffffff},
|
|
{PXP2_REG_PXP2_PRTY_MASK_1, 0xffffffff},
|
|
{HC_REG_HC_PRTY_MASK, 0xffffffff},
|
|
{MISC_REG_MISC_PRTY_MASK, 0xffffffff},
|
|
{QM_REG_QM_PRTY_MASK, 0x0},
|
|
{DORQ_REG_DORQ_PRTY_MASK, 0x0},
|
|
{GRCBASE_UPB + PB_REG_PB_PRTY_MASK, 0x0},
|
|
{GRCBASE_XPB + PB_REG_PB_PRTY_MASK, 0x0},
|
|
{SRC_REG_SRC_PRTY_MASK, 0x4}, /* bit 2 */
|
|
{CDU_REG_CDU_PRTY_MASK, 0x0},
|
|
{CFC_REG_CFC_PRTY_MASK, 0x0},
|
|
{DBG_REG_DBG_PRTY_MASK, 0x0},
|
|
{DMAE_REG_DMAE_PRTY_MASK, 0x0},
|
|
{BRB1_REG_BRB1_PRTY_MASK, 0x0},
|
|
{PRS_REG_PRS_PRTY_MASK, (1<<6)},/* bit 6 */
|
|
{TSDM_REG_TSDM_PRTY_MASK, 0x18},/* bit 3,4 */
|
|
{CSDM_REG_CSDM_PRTY_MASK, 0x8}, /* bit 3 */
|
|
{USDM_REG_USDM_PRTY_MASK, 0x38},/* bit 3,4,5 */
|
|
{XSDM_REG_XSDM_PRTY_MASK, 0x8}, /* bit 3 */
|
|
{TSEM_REG_TSEM_PRTY_MASK_0, 0x0},
|
|
{TSEM_REG_TSEM_PRTY_MASK_1, 0x0},
|
|
{USEM_REG_USEM_PRTY_MASK_0, 0x0},
|
|
{USEM_REG_USEM_PRTY_MASK_1, 0x0},
|
|
{CSEM_REG_CSEM_PRTY_MASK_0, 0x0},
|
|
{CSEM_REG_CSEM_PRTY_MASK_1, 0x0},
|
|
{XSEM_REG_XSEM_PRTY_MASK_0, 0x0},
|
|
{XSEM_REG_XSEM_PRTY_MASK_1, 0x0}
|
|
};
|
|
|
|
static void enable_blocks_parity(struct bnx2x *bp)
|
|
{
|
|
int i, mask_arr_len =
|
|
sizeof(bnx2x_parity_mask)/(sizeof(bnx2x_parity_mask[0]));
|
|
|
|
for (i = 0; i < mask_arr_len; i++)
|
|
REG_WR(bp, bnx2x_parity_mask[i].addr,
|
|
bnx2x_parity_mask[i].mask);
|
|
}
|
|
|
|
|
|
static void bnx2x_reset_common(struct bnx2x *bp)
|
|
{
|
|
/* reset_common */
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
|
|
0xd3ffff7f);
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403);
|
|
}
|
|
|
|
static void bnx2x_init_pxp(struct bnx2x *bp)
|
|
{
|
|
u16 devctl;
|
|
int r_order, w_order;
|
|
|
|
pci_read_config_word(bp->pdev,
|
|
bp->pcie_cap + PCI_EXP_DEVCTL, &devctl);
|
|
DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl);
|
|
w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
|
|
if (bp->mrrs == -1)
|
|
r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12);
|
|
else {
|
|
DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs);
|
|
r_order = bp->mrrs;
|
|
}
|
|
|
|
bnx2x_init_pxp_arb(bp, r_order, w_order);
|
|
}
|
|
|
|
static void bnx2x_setup_fan_failure_detection(struct bnx2x *bp)
|
|
{
|
|
int is_required;
|
|
u32 val;
|
|
int port;
|
|
|
|
if (BP_NOMCP(bp))
|
|
return;
|
|
|
|
is_required = 0;
|
|
val = SHMEM_RD(bp, dev_info.shared_hw_config.config2) &
|
|
SHARED_HW_CFG_FAN_FAILURE_MASK;
|
|
|
|
if (val == SHARED_HW_CFG_FAN_FAILURE_ENABLED)
|
|
is_required = 1;
|
|
|
|
/*
|
|
* The fan failure mechanism is usually related to the PHY type since
|
|
* the power consumption of the board is affected by the PHY. Currently,
|
|
* fan is required for most designs with SFX7101, BCM8727 and BCM8481.
|
|
*/
|
|
else if (val == SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE)
|
|
for (port = PORT_0; port < PORT_MAX; port++) {
|
|
u32 phy_type =
|
|
SHMEM_RD(bp, dev_info.port_hw_config[port].
|
|
external_phy_config) &
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
|
|
is_required |=
|
|
((phy_type ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101) ||
|
|
(phy_type ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727) ||
|
|
(phy_type ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481));
|
|
}
|
|
|
|
DP(NETIF_MSG_HW, "fan detection setting: %d\n", is_required);
|
|
|
|
if (is_required == 0)
|
|
return;
|
|
|
|
/* Fan failure is indicated by SPIO 5 */
|
|
bnx2x_set_spio(bp, MISC_REGISTERS_SPIO_5,
|
|
MISC_REGISTERS_SPIO_INPUT_HI_Z);
|
|
|
|
/* set to active low mode */
|
|
val = REG_RD(bp, MISC_REG_SPIO_INT);
|
|
val |= ((1 << MISC_REGISTERS_SPIO_5) <<
|
|
MISC_REGISTERS_SPIO_INT_OLD_SET_POS);
|
|
REG_WR(bp, MISC_REG_SPIO_INT, val);
|
|
|
|
/* enable interrupt to signal the IGU */
|
|
val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN);
|
|
val |= (1 << MISC_REGISTERS_SPIO_5);
|
|
REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val);
|
|
}
|
|
|
|
static int bnx2x_init_common(struct bnx2x *bp)
|
|
{
|
|
u32 val, i;
|
|
#ifdef BCM_CNIC
|
|
u32 wb_write[2];
|
|
#endif
|
|
|
|
DP(BNX2X_MSG_MCP, "starting common init func %d\n", BP_FUNC(bp));
|
|
|
|
bnx2x_reset_common(bp);
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, 0xfffc);
|
|
|
|
bnx2x_init_block(bp, MISC_BLOCK, COMMON_STAGE);
|
|
if (CHIP_IS_E1H(bp))
|
|
REG_WR(bp, MISC_REG_E1HMF_MODE, IS_E1HMF(bp));
|
|
|
|
REG_WR(bp, MISC_REG_LCPLL_CTRL_REG_2, 0x100);
|
|
msleep(30);
|
|
REG_WR(bp, MISC_REG_LCPLL_CTRL_REG_2, 0x0);
|
|
|
|
bnx2x_init_block(bp, PXP_BLOCK, COMMON_STAGE);
|
|
if (CHIP_IS_E1(bp)) {
|
|
/* enable HW interrupt from PXP on USDM overflow
|
|
bit 16 on INT_MASK_0 */
|
|
REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0);
|
|
}
|
|
|
|
bnx2x_init_block(bp, PXP2_BLOCK, COMMON_STAGE);
|
|
bnx2x_init_pxp(bp);
|
|
|
|
#ifdef __BIG_ENDIAN
|
|
REG_WR(bp, PXP2_REG_RQ_QM_ENDIAN_M, 1);
|
|
REG_WR(bp, PXP2_REG_RQ_TM_ENDIAN_M, 1);
|
|
REG_WR(bp, PXP2_REG_RQ_SRC_ENDIAN_M, 1);
|
|
REG_WR(bp, PXP2_REG_RQ_CDU_ENDIAN_M, 1);
|
|
REG_WR(bp, PXP2_REG_RQ_DBG_ENDIAN_M, 1);
|
|
/* make sure this value is 0 */
|
|
REG_WR(bp, PXP2_REG_RQ_HC_ENDIAN_M, 0);
|
|
|
|
/* REG_WR(bp, PXP2_REG_RD_PBF_SWAP_MODE, 1); */
|
|
REG_WR(bp, PXP2_REG_RD_QM_SWAP_MODE, 1);
|
|
REG_WR(bp, PXP2_REG_RD_TM_SWAP_MODE, 1);
|
|
REG_WR(bp, PXP2_REG_RD_SRC_SWAP_MODE, 1);
|
|
REG_WR(bp, PXP2_REG_RD_CDURD_SWAP_MODE, 1);
|
|
#endif
|
|
|
|
REG_WR(bp, PXP2_REG_RQ_CDU_P_SIZE, 2);
|
|
#ifdef BCM_CNIC
|
|
REG_WR(bp, PXP2_REG_RQ_TM_P_SIZE, 5);
|
|
REG_WR(bp, PXP2_REG_RQ_QM_P_SIZE, 5);
|
|
REG_WR(bp, PXP2_REG_RQ_SRC_P_SIZE, 5);
|
|
#endif
|
|
|
|
if (CHIP_REV_IS_FPGA(bp) && CHIP_IS_E1H(bp))
|
|
REG_WR(bp, PXP2_REG_PGL_TAGS_LIMIT, 0x1);
|
|
|
|
/* let the HW do it's magic ... */
|
|
msleep(100);
|
|
/* finish PXP init */
|
|
val = REG_RD(bp, PXP2_REG_RQ_CFG_DONE);
|
|
if (val != 1) {
|
|
BNX2X_ERR("PXP2 CFG failed\n");
|
|
return -EBUSY;
|
|
}
|
|
val = REG_RD(bp, PXP2_REG_RD_INIT_DONE);
|
|
if (val != 1) {
|
|
BNX2X_ERR("PXP2 RD_INIT failed\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
REG_WR(bp, PXP2_REG_RQ_DISABLE_INPUTS, 0);
|
|
REG_WR(bp, PXP2_REG_RD_DISABLE_INPUTS, 0);
|
|
|
|
bnx2x_init_block(bp, DMAE_BLOCK, COMMON_STAGE);
|
|
|
|
/* clean the DMAE memory */
|
|
bp->dmae_ready = 1;
|
|
bnx2x_init_fill(bp, TSEM_REG_PRAM, 0, 8);
|
|
|
|
bnx2x_init_block(bp, TCM_BLOCK, COMMON_STAGE);
|
|
bnx2x_init_block(bp, UCM_BLOCK, COMMON_STAGE);
|
|
bnx2x_init_block(bp, CCM_BLOCK, COMMON_STAGE);
|
|
bnx2x_init_block(bp, XCM_BLOCK, COMMON_STAGE);
|
|
|
|
bnx2x_read_dmae(bp, XSEM_REG_PASSIVE_BUFFER, 3);
|
|
bnx2x_read_dmae(bp, CSEM_REG_PASSIVE_BUFFER, 3);
|
|
bnx2x_read_dmae(bp, TSEM_REG_PASSIVE_BUFFER, 3);
|
|
bnx2x_read_dmae(bp, USEM_REG_PASSIVE_BUFFER, 3);
|
|
|
|
bnx2x_init_block(bp, QM_BLOCK, COMMON_STAGE);
|
|
|
|
#ifdef BCM_CNIC
|
|
wb_write[0] = 0;
|
|
wb_write[1] = 0;
|
|
for (i = 0; i < 64; i++) {
|
|
REG_WR(bp, QM_REG_BASEADDR + i*4, 1024 * 4 * (i%16));
|
|
bnx2x_init_ind_wr(bp, QM_REG_PTRTBL + i*8, wb_write, 2);
|
|
|
|
if (CHIP_IS_E1H(bp)) {
|
|
REG_WR(bp, QM_REG_BASEADDR_EXT_A + i*4, 1024*4*(i%16));
|
|
bnx2x_init_ind_wr(bp, QM_REG_PTRTBL_EXT_A + i*8,
|
|
wb_write, 2);
|
|
}
|
|
}
|
|
#endif
|
|
/* soft reset pulse */
|
|
REG_WR(bp, QM_REG_SOFT_RESET, 1);
|
|
REG_WR(bp, QM_REG_SOFT_RESET, 0);
|
|
|
|
#ifdef BCM_CNIC
|
|
bnx2x_init_block(bp, TIMERS_BLOCK, COMMON_STAGE);
|
|
#endif
|
|
|
|
bnx2x_init_block(bp, DQ_BLOCK, COMMON_STAGE);
|
|
REG_WR(bp, DORQ_REG_DPM_CID_OFST, BCM_PAGE_SHIFT);
|
|
if (!CHIP_REV_IS_SLOW(bp)) {
|
|
/* enable hw interrupt from doorbell Q */
|
|
REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0);
|
|
}
|
|
|
|
bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
|
|
bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
|
|
REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
|
|
#ifndef BCM_CNIC
|
|
/* set NIC mode */
|
|
REG_WR(bp, PRS_REG_NIC_MODE, 1);
|
|
#endif
|
|
if (CHIP_IS_E1H(bp))
|
|
REG_WR(bp, PRS_REG_E1HOV_MODE, IS_E1HMF(bp));
|
|
|
|
bnx2x_init_block(bp, TSDM_BLOCK, COMMON_STAGE);
|
|
bnx2x_init_block(bp, CSDM_BLOCK, COMMON_STAGE);
|
|
bnx2x_init_block(bp, USDM_BLOCK, COMMON_STAGE);
|
|
bnx2x_init_block(bp, XSDM_BLOCK, COMMON_STAGE);
|
|
|
|
bnx2x_init_fill(bp, TSEM_REG_FAST_MEMORY, 0, STORM_INTMEM_SIZE(bp));
|
|
bnx2x_init_fill(bp, USEM_REG_FAST_MEMORY, 0, STORM_INTMEM_SIZE(bp));
|
|
bnx2x_init_fill(bp, CSEM_REG_FAST_MEMORY, 0, STORM_INTMEM_SIZE(bp));
|
|
bnx2x_init_fill(bp, XSEM_REG_FAST_MEMORY, 0, STORM_INTMEM_SIZE(bp));
|
|
|
|
bnx2x_init_block(bp, TSEM_BLOCK, COMMON_STAGE);
|
|
bnx2x_init_block(bp, USEM_BLOCK, COMMON_STAGE);
|
|
bnx2x_init_block(bp, CSEM_BLOCK, COMMON_STAGE);
|
|
bnx2x_init_block(bp, XSEM_BLOCK, COMMON_STAGE);
|
|
|
|
/* sync semi rtc */
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
|
|
0x80000000);
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
|
|
0x80000000);
|
|
|
|
bnx2x_init_block(bp, UPB_BLOCK, COMMON_STAGE);
|
|
bnx2x_init_block(bp, XPB_BLOCK, COMMON_STAGE);
|
|
bnx2x_init_block(bp, PBF_BLOCK, COMMON_STAGE);
|
|
|
|
REG_WR(bp, SRC_REG_SOFT_RST, 1);
|
|
for (i = SRC_REG_KEYRSS0_0; i <= SRC_REG_KEYRSS1_9; i += 4)
|
|
REG_WR(bp, i, random32());
|
|
bnx2x_init_block(bp, SRCH_BLOCK, COMMON_STAGE);
|
|
#ifdef BCM_CNIC
|
|
REG_WR(bp, SRC_REG_KEYSEARCH_0, 0x63285672);
|
|
REG_WR(bp, SRC_REG_KEYSEARCH_1, 0x24b8f2cc);
|
|
REG_WR(bp, SRC_REG_KEYSEARCH_2, 0x223aef9b);
|
|
REG_WR(bp, SRC_REG_KEYSEARCH_3, 0x26001e3a);
|
|
REG_WR(bp, SRC_REG_KEYSEARCH_4, 0x7ae91116);
|
|
REG_WR(bp, SRC_REG_KEYSEARCH_5, 0x5ce5230b);
|
|
REG_WR(bp, SRC_REG_KEYSEARCH_6, 0x298d8adf);
|
|
REG_WR(bp, SRC_REG_KEYSEARCH_7, 0x6eb0ff09);
|
|
REG_WR(bp, SRC_REG_KEYSEARCH_8, 0x1830f82f);
|
|
REG_WR(bp, SRC_REG_KEYSEARCH_9, 0x01e46be7);
|
|
#endif
|
|
REG_WR(bp, SRC_REG_SOFT_RST, 0);
|
|
|
|
if (sizeof(union cdu_context) != 1024)
|
|
/* we currently assume that a context is 1024 bytes */
|
|
dev_alert(&bp->pdev->dev, "please adjust the size "
|
|
"of cdu_context(%ld)\n",
|
|
(long)sizeof(union cdu_context));
|
|
|
|
bnx2x_init_block(bp, CDU_BLOCK, COMMON_STAGE);
|
|
val = (4 << 24) + (0 << 12) + 1024;
|
|
REG_WR(bp, CDU_REG_CDU_GLOBAL_PARAMS, val);
|
|
|
|
bnx2x_init_block(bp, CFC_BLOCK, COMMON_STAGE);
|
|
REG_WR(bp, CFC_REG_INIT_REG, 0x7FF);
|
|
/* enable context validation interrupt from CFC */
|
|
REG_WR(bp, CFC_REG_CFC_INT_MASK, 0);
|
|
|
|
/* set the thresholds to prevent CFC/CDU race */
|
|
REG_WR(bp, CFC_REG_DEBUG0, 0x20020000);
|
|
|
|
bnx2x_init_block(bp, HC_BLOCK, COMMON_STAGE);
|
|
bnx2x_init_block(bp, MISC_AEU_BLOCK, COMMON_STAGE);
|
|
|
|
bnx2x_init_block(bp, PXPCS_BLOCK, COMMON_STAGE);
|
|
/* Reset PCIE errors for debug */
|
|
REG_WR(bp, 0x2814, 0xffffffff);
|
|
REG_WR(bp, 0x3820, 0xffffffff);
|
|
|
|
bnx2x_init_block(bp, EMAC0_BLOCK, COMMON_STAGE);
|
|
bnx2x_init_block(bp, EMAC1_BLOCK, COMMON_STAGE);
|
|
bnx2x_init_block(bp, DBU_BLOCK, COMMON_STAGE);
|
|
bnx2x_init_block(bp, DBG_BLOCK, COMMON_STAGE);
|
|
|
|
bnx2x_init_block(bp, NIG_BLOCK, COMMON_STAGE);
|
|
if (CHIP_IS_E1H(bp)) {
|
|
REG_WR(bp, NIG_REG_LLH_MF_MODE, IS_E1HMF(bp));
|
|
REG_WR(bp, NIG_REG_LLH_E1HOV_MODE, IS_E1HMF(bp));
|
|
}
|
|
|
|
if (CHIP_REV_IS_SLOW(bp))
|
|
msleep(200);
|
|
|
|
/* finish CFC init */
|
|
val = reg_poll(bp, CFC_REG_LL_INIT_DONE, 1, 100, 10);
|
|
if (val != 1) {
|
|
BNX2X_ERR("CFC LL_INIT failed\n");
|
|
return -EBUSY;
|
|
}
|
|
val = reg_poll(bp, CFC_REG_AC_INIT_DONE, 1, 100, 10);
|
|
if (val != 1) {
|
|
BNX2X_ERR("CFC AC_INIT failed\n");
|
|
return -EBUSY;
|
|
}
|
|
val = reg_poll(bp, CFC_REG_CAM_INIT_DONE, 1, 100, 10);
|
|
if (val != 1) {
|
|
BNX2X_ERR("CFC CAM_INIT failed\n");
|
|
return -EBUSY;
|
|
}
|
|
REG_WR(bp, CFC_REG_DEBUG0, 0);
|
|
|
|
/* read NIG statistic
|
|
to see if this is our first up since powerup */
|
|
bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2);
|
|
val = *bnx2x_sp(bp, wb_data[0]);
|
|
|
|
/* do internal memory self test */
|
|
if ((CHIP_IS_E1(bp)) && (val == 0) && bnx2x_int_mem_test(bp)) {
|
|
BNX2X_ERR("internal mem self test failed\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
switch (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config)) {
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
|
|
bp->port.need_hw_lock = 1;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
bnx2x_setup_fan_failure_detection(bp);
|
|
|
|
/* clear PXP2 attentions */
|
|
REG_RD(bp, PXP2_REG_PXP2_INT_STS_CLR_0);
|
|
|
|
enable_blocks_attention(bp);
|
|
if (CHIP_PARITY_SUPPORTED(bp))
|
|
enable_blocks_parity(bp);
|
|
|
|
if (!BP_NOMCP(bp)) {
|
|
bnx2x_acquire_phy_lock(bp);
|
|
bnx2x_common_init_phy(bp, bp->common.shmem_base);
|
|
bnx2x_release_phy_lock(bp);
|
|
} else
|
|
BNX2X_ERR("Bootcode is missing - can not initialize link\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_init_port(struct bnx2x *bp)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
int init_stage = port ? PORT1_STAGE : PORT0_STAGE;
|
|
u32 low, high;
|
|
u32 val;
|
|
|
|
DP(BNX2X_MSG_MCP, "starting port init port %d\n", port);
|
|
|
|
REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0);
|
|
|
|
bnx2x_init_block(bp, PXP_BLOCK, init_stage);
|
|
bnx2x_init_block(bp, PXP2_BLOCK, init_stage);
|
|
|
|
bnx2x_init_block(bp, TCM_BLOCK, init_stage);
|
|
bnx2x_init_block(bp, UCM_BLOCK, init_stage);
|
|
bnx2x_init_block(bp, CCM_BLOCK, init_stage);
|
|
bnx2x_init_block(bp, XCM_BLOCK, init_stage);
|
|
|
|
#ifdef BCM_CNIC
|
|
REG_WR(bp, QM_REG_CONNNUM_0 + port*4, 1024/16 - 1);
|
|
|
|
bnx2x_init_block(bp, TIMERS_BLOCK, init_stage);
|
|
REG_WR(bp, TM_REG_LIN0_SCAN_TIME + port*4, 20);
|
|
REG_WR(bp, TM_REG_LIN0_MAX_ACTIVE_CID + port*4, 31);
|
|
#endif
|
|
|
|
bnx2x_init_block(bp, DQ_BLOCK, init_stage);
|
|
|
|
bnx2x_init_block(bp, BRB1_BLOCK, init_stage);
|
|
if (CHIP_REV_IS_SLOW(bp) && !CHIP_IS_E1H(bp)) {
|
|
/* no pause for emulation and FPGA */
|
|
low = 0;
|
|
high = 513;
|
|
} else {
|
|
if (IS_E1HMF(bp))
|
|
low = ((bp->flags & ONE_PORT_FLAG) ? 160 : 246);
|
|
else if (bp->dev->mtu > 4096) {
|
|
if (bp->flags & ONE_PORT_FLAG)
|
|
low = 160;
|
|
else {
|
|
val = bp->dev->mtu;
|
|
/* (24*1024 + val*4)/256 */
|
|
low = 96 + (val/64) + ((val % 64) ? 1 : 0);
|
|
}
|
|
} else
|
|
low = ((bp->flags & ONE_PORT_FLAG) ? 80 : 160);
|
|
high = low + 56; /* 14*1024/256 */
|
|
}
|
|
REG_WR(bp, BRB1_REG_PAUSE_LOW_THRESHOLD_0 + port*4, low);
|
|
REG_WR(bp, BRB1_REG_PAUSE_HIGH_THRESHOLD_0 + port*4, high);
|
|
|
|
|
|
bnx2x_init_block(bp, PRS_BLOCK, init_stage);
|
|
|
|
bnx2x_init_block(bp, TSDM_BLOCK, init_stage);
|
|
bnx2x_init_block(bp, CSDM_BLOCK, init_stage);
|
|
bnx2x_init_block(bp, USDM_BLOCK, init_stage);
|
|
bnx2x_init_block(bp, XSDM_BLOCK, init_stage);
|
|
|
|
bnx2x_init_block(bp, TSEM_BLOCK, init_stage);
|
|
bnx2x_init_block(bp, USEM_BLOCK, init_stage);
|
|
bnx2x_init_block(bp, CSEM_BLOCK, init_stage);
|
|
bnx2x_init_block(bp, XSEM_BLOCK, init_stage);
|
|
|
|
bnx2x_init_block(bp, UPB_BLOCK, init_stage);
|
|
bnx2x_init_block(bp, XPB_BLOCK, init_stage);
|
|
|
|
bnx2x_init_block(bp, PBF_BLOCK, init_stage);
|
|
|
|
/* configure PBF to work without PAUSE mtu 9000 */
|
|
REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0);
|
|
|
|
/* update threshold */
|
|
REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, (9040/16));
|
|
/* update init credit */
|
|
REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, (9040/16) + 553 - 22);
|
|
|
|
/* probe changes */
|
|
REG_WR(bp, PBF_REG_INIT_P0 + port*4, 1);
|
|
msleep(5);
|
|
REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0);
|
|
|
|
#ifdef BCM_CNIC
|
|
bnx2x_init_block(bp, SRCH_BLOCK, init_stage);
|
|
#endif
|
|
bnx2x_init_block(bp, CDU_BLOCK, init_stage);
|
|
bnx2x_init_block(bp, CFC_BLOCK, init_stage);
|
|
|
|
if (CHIP_IS_E1(bp)) {
|
|
REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
|
|
REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
|
|
}
|
|
bnx2x_init_block(bp, HC_BLOCK, init_stage);
|
|
|
|
bnx2x_init_block(bp, MISC_AEU_BLOCK, init_stage);
|
|
/* init aeu_mask_attn_func_0/1:
|
|
* - SF mode: bits 3-7 are masked. only bits 0-2 are in use
|
|
* - MF mode: bit 3 is masked. bits 0-2 are in use as in SF
|
|
* bits 4-7 are used for "per vn group attention" */
|
|
REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4,
|
|
(IS_E1HMF(bp) ? 0xF7 : 0x7));
|
|
|
|
bnx2x_init_block(bp, PXPCS_BLOCK, init_stage);
|
|
bnx2x_init_block(bp, EMAC0_BLOCK, init_stage);
|
|
bnx2x_init_block(bp, EMAC1_BLOCK, init_stage);
|
|
bnx2x_init_block(bp, DBU_BLOCK, init_stage);
|
|
bnx2x_init_block(bp, DBG_BLOCK, init_stage);
|
|
|
|
bnx2x_init_block(bp, NIG_BLOCK, init_stage);
|
|
|
|
REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1);
|
|
|
|
if (CHIP_IS_E1H(bp)) {
|
|
/* 0x2 disable e1hov, 0x1 enable */
|
|
REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK_MF + port*4,
|
|
(IS_E1HMF(bp) ? 0x1 : 0x2));
|
|
|
|
{
|
|
REG_WR(bp, NIG_REG_LLFC_ENABLE_0 + port*4, 0);
|
|
REG_WR(bp, NIG_REG_LLFC_OUT_EN_0 + port*4, 0);
|
|
REG_WR(bp, NIG_REG_PAUSE_ENABLE_0 + port*4, 1);
|
|
}
|
|
}
|
|
|
|
bnx2x_init_block(bp, MCP_BLOCK, init_stage);
|
|
bnx2x_init_block(bp, DMAE_BLOCK, init_stage);
|
|
|
|
switch (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config)) {
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
|
|
{
|
|
u32 swap_val, swap_override, aeu_gpio_mask, offset;
|
|
|
|
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
|
|
MISC_REGISTERS_GPIO_INPUT_HI_Z, port);
|
|
|
|
/* The GPIO should be swapped if the swap register is
|
|
set and active */
|
|
swap_val = REG_RD(bp, NIG_REG_PORT_SWAP);
|
|
swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE);
|
|
|
|
/* Select function upon port-swap configuration */
|
|
if (port == 0) {
|
|
offset = MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
|
|
aeu_gpio_mask = (swap_val && swap_override) ?
|
|
AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1 :
|
|
AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0;
|
|
} else {
|
|
offset = MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0;
|
|
aeu_gpio_mask = (swap_val && swap_override) ?
|
|
AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 :
|
|
AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1;
|
|
}
|
|
val = REG_RD(bp, offset);
|
|
/* add GPIO3 to group */
|
|
val |= aeu_gpio_mask;
|
|
REG_WR(bp, offset, val);
|
|
}
|
|
bp->port.need_hw_lock = 1;
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
|
|
bp->port.need_hw_lock = 1;
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
|
|
/* add SPIO 5 to group 0 */
|
|
{
|
|
u32 reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
|
|
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
|
|
val = REG_RD(bp, reg_addr);
|
|
val |= AEU_INPUTS_ATTN_BITS_SPIO5;
|
|
REG_WR(bp, reg_addr, val);
|
|
}
|
|
break;
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
|
|
bp->port.need_hw_lock = 1;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
bnx2x__link_reset(bp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define ILT_PER_FUNC (768/2)
|
|
#define FUNC_ILT_BASE(func) (func * ILT_PER_FUNC)
|
|
/* the phys address is shifted right 12 bits and has an added
|
|
1=valid bit added to the 53rd bit
|
|
then since this is a wide register(TM)
|
|
we split it into two 32 bit writes
|
|
*/
|
|
#define ONCHIP_ADDR1(x) ((u32)(((u64)x >> 12) & 0xFFFFFFFF))
|
|
#define ONCHIP_ADDR2(x) ((u32)((1 << 20) | ((u64)x >> 44)))
|
|
#define PXP_ONE_ILT(x) (((x) << 10) | x)
|
|
#define PXP_ILT_RANGE(f, l) (((l) << 10) | f)
|
|
|
|
#ifdef BCM_CNIC
|
|
#define CNIC_ILT_LINES 127
|
|
#define CNIC_CTX_PER_ILT 16
|
|
#else
|
|
#define CNIC_ILT_LINES 0
|
|
#endif
|
|
|
|
static void bnx2x_ilt_wr(struct bnx2x *bp, u32 index, dma_addr_t addr)
|
|
{
|
|
int reg;
|
|
|
|
if (CHIP_IS_E1H(bp))
|
|
reg = PXP2_REG_RQ_ONCHIP_AT_B0 + index*8;
|
|
else /* E1 */
|
|
reg = PXP2_REG_RQ_ONCHIP_AT + index*8;
|
|
|
|
bnx2x_wb_wr(bp, reg, ONCHIP_ADDR1(addr), ONCHIP_ADDR2(addr));
|
|
}
|
|
|
|
static int bnx2x_init_func(struct bnx2x *bp)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
int func = BP_FUNC(bp);
|
|
u32 addr, val;
|
|
int i;
|
|
|
|
DP(BNX2X_MSG_MCP, "starting func init func %d\n", func);
|
|
|
|
/* set MSI reconfigure capability */
|
|
addr = (port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0);
|
|
val = REG_RD(bp, addr);
|
|
val |= HC_CONFIG_0_REG_MSI_ATTN_EN_0;
|
|
REG_WR(bp, addr, val);
|
|
|
|
i = FUNC_ILT_BASE(func);
|
|
|
|
bnx2x_ilt_wr(bp, i, bnx2x_sp_mapping(bp, context));
|
|
if (CHIP_IS_E1H(bp)) {
|
|
REG_WR(bp, PXP2_REG_RQ_CDU_FIRST_ILT, i);
|
|
REG_WR(bp, PXP2_REG_RQ_CDU_LAST_ILT, i + CNIC_ILT_LINES);
|
|
} else /* E1 */
|
|
REG_WR(bp, PXP2_REG_PSWRQ_CDU0_L2P + func*4,
|
|
PXP_ILT_RANGE(i, i + CNIC_ILT_LINES));
|
|
|
|
#ifdef BCM_CNIC
|
|
i += 1 + CNIC_ILT_LINES;
|
|
bnx2x_ilt_wr(bp, i, bp->timers_mapping);
|
|
if (CHIP_IS_E1(bp))
|
|
REG_WR(bp, PXP2_REG_PSWRQ_TM0_L2P + func*4, PXP_ONE_ILT(i));
|
|
else {
|
|
REG_WR(bp, PXP2_REG_RQ_TM_FIRST_ILT, i);
|
|
REG_WR(bp, PXP2_REG_RQ_TM_LAST_ILT, i);
|
|
}
|
|
|
|
i++;
|
|
bnx2x_ilt_wr(bp, i, bp->qm_mapping);
|
|
if (CHIP_IS_E1(bp))
|
|
REG_WR(bp, PXP2_REG_PSWRQ_QM0_L2P + func*4, PXP_ONE_ILT(i));
|
|
else {
|
|
REG_WR(bp, PXP2_REG_RQ_QM_FIRST_ILT, i);
|
|
REG_WR(bp, PXP2_REG_RQ_QM_LAST_ILT, i);
|
|
}
|
|
|
|
i++;
|
|
bnx2x_ilt_wr(bp, i, bp->t1_mapping);
|
|
if (CHIP_IS_E1(bp))
|
|
REG_WR(bp, PXP2_REG_PSWRQ_SRC0_L2P + func*4, PXP_ONE_ILT(i));
|
|
else {
|
|
REG_WR(bp, PXP2_REG_RQ_SRC_FIRST_ILT, i);
|
|
REG_WR(bp, PXP2_REG_RQ_SRC_LAST_ILT, i);
|
|
}
|
|
|
|
/* tell the searcher where the T2 table is */
|
|
REG_WR(bp, SRC_REG_COUNTFREE0 + port*4, 16*1024/64);
|
|
|
|
bnx2x_wb_wr(bp, SRC_REG_FIRSTFREE0 + port*16,
|
|
U64_LO(bp->t2_mapping), U64_HI(bp->t2_mapping));
|
|
|
|
bnx2x_wb_wr(bp, SRC_REG_LASTFREE0 + port*16,
|
|
U64_LO((u64)bp->t2_mapping + 16*1024 - 64),
|
|
U64_HI((u64)bp->t2_mapping + 16*1024 - 64));
|
|
|
|
REG_WR(bp, SRC_REG_NUMBER_HASH_BITS0 + port*4, 10);
|
|
#endif
|
|
|
|
if (CHIP_IS_E1H(bp)) {
|
|
bnx2x_init_block(bp, MISC_BLOCK, FUNC0_STAGE + func);
|
|
bnx2x_init_block(bp, TCM_BLOCK, FUNC0_STAGE + func);
|
|
bnx2x_init_block(bp, UCM_BLOCK, FUNC0_STAGE + func);
|
|
bnx2x_init_block(bp, CCM_BLOCK, FUNC0_STAGE + func);
|
|
bnx2x_init_block(bp, XCM_BLOCK, FUNC0_STAGE + func);
|
|
bnx2x_init_block(bp, TSEM_BLOCK, FUNC0_STAGE + func);
|
|
bnx2x_init_block(bp, USEM_BLOCK, FUNC0_STAGE + func);
|
|
bnx2x_init_block(bp, CSEM_BLOCK, FUNC0_STAGE + func);
|
|
bnx2x_init_block(bp, XSEM_BLOCK, FUNC0_STAGE + func);
|
|
|
|
REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 1);
|
|
REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + port*8, bp->e1hov);
|
|
}
|
|
|
|
/* HC init per function */
|
|
if (CHIP_IS_E1H(bp)) {
|
|
REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0);
|
|
|
|
REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
|
|
REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
|
|
}
|
|
bnx2x_init_block(bp, HC_BLOCK, FUNC0_STAGE + func);
|
|
|
|
/* Reset PCIE errors for debug */
|
|
REG_WR(bp, 0x2114, 0xffffffff);
|
|
REG_WR(bp, 0x2120, 0xffffffff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int bnx2x_init_hw(struct bnx2x *bp, u32 load_code)
|
|
{
|
|
int i, rc = 0;
|
|
|
|
DP(BNX2X_MSG_MCP, "function %d load_code %x\n",
|
|
BP_FUNC(bp), load_code);
|
|
|
|
bp->dmae_ready = 0;
|
|
mutex_init(&bp->dmae_mutex);
|
|
rc = bnx2x_gunzip_init(bp);
|
|
if (rc)
|
|
return rc;
|
|
|
|
switch (load_code) {
|
|
case FW_MSG_CODE_DRV_LOAD_COMMON:
|
|
rc = bnx2x_init_common(bp);
|
|
if (rc)
|
|
goto init_hw_err;
|
|
/* no break */
|
|
|
|
case FW_MSG_CODE_DRV_LOAD_PORT:
|
|
bp->dmae_ready = 1;
|
|
rc = bnx2x_init_port(bp);
|
|
if (rc)
|
|
goto init_hw_err;
|
|
/* no break */
|
|
|
|
case FW_MSG_CODE_DRV_LOAD_FUNCTION:
|
|
bp->dmae_ready = 1;
|
|
rc = bnx2x_init_func(bp);
|
|
if (rc)
|
|
goto init_hw_err;
|
|
break;
|
|
|
|
default:
|
|
BNX2X_ERR("Unknown load_code (0x%x) from MCP\n", load_code);
|
|
break;
|
|
}
|
|
|
|
if (!BP_NOMCP(bp)) {
|
|
int func = BP_FUNC(bp);
|
|
|
|
bp->fw_drv_pulse_wr_seq =
|
|
(SHMEM_RD(bp, func_mb[func].drv_pulse_mb) &
|
|
DRV_PULSE_SEQ_MASK);
|
|
DP(BNX2X_MSG_MCP, "drv_pulse 0x%x\n", bp->fw_drv_pulse_wr_seq);
|
|
}
|
|
|
|
/* this needs to be done before gunzip end */
|
|
bnx2x_zero_def_sb(bp);
|
|
for_each_queue(bp, i)
|
|
bnx2x_zero_sb(bp, BP_L_ID(bp) + i);
|
|
#ifdef BCM_CNIC
|
|
bnx2x_zero_sb(bp, BP_L_ID(bp) + i);
|
|
#endif
|
|
|
|
init_hw_err:
|
|
bnx2x_gunzip_end(bp);
|
|
|
|
return rc;
|
|
}
|
|
|
|
void bnx2x_free_mem(struct bnx2x *bp)
|
|
{
|
|
|
|
#define BNX2X_PCI_FREE(x, y, size) \
|
|
do { \
|
|
if (x) { \
|
|
dma_free_coherent(&bp->pdev->dev, size, x, y); \
|
|
x = NULL; \
|
|
y = 0; \
|
|
} \
|
|
} while (0)
|
|
|
|
#define BNX2X_FREE(x) \
|
|
do { \
|
|
if (x) { \
|
|
vfree(x); \
|
|
x = NULL; \
|
|
} \
|
|
} while (0)
|
|
|
|
int i;
|
|
|
|
/* fastpath */
|
|
/* Common */
|
|
for_each_queue(bp, i) {
|
|
|
|
/* status blocks */
|
|
BNX2X_PCI_FREE(bnx2x_fp(bp, i, status_blk),
|
|
bnx2x_fp(bp, i, status_blk_mapping),
|
|
sizeof(struct host_status_block));
|
|
}
|
|
/* Rx */
|
|
for_each_queue(bp, i) {
|
|
|
|
/* fastpath rx rings: rx_buf rx_desc rx_comp */
|
|
BNX2X_FREE(bnx2x_fp(bp, i, rx_buf_ring));
|
|
BNX2X_PCI_FREE(bnx2x_fp(bp, i, rx_desc_ring),
|
|
bnx2x_fp(bp, i, rx_desc_mapping),
|
|
sizeof(struct eth_rx_bd) * NUM_RX_BD);
|
|
|
|
BNX2X_PCI_FREE(bnx2x_fp(bp, i, rx_comp_ring),
|
|
bnx2x_fp(bp, i, rx_comp_mapping),
|
|
sizeof(struct eth_fast_path_rx_cqe) *
|
|
NUM_RCQ_BD);
|
|
|
|
/* SGE ring */
|
|
BNX2X_FREE(bnx2x_fp(bp, i, rx_page_ring));
|
|
BNX2X_PCI_FREE(bnx2x_fp(bp, i, rx_sge_ring),
|
|
bnx2x_fp(bp, i, rx_sge_mapping),
|
|
BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
|
|
}
|
|
/* Tx */
|
|
for_each_queue(bp, i) {
|
|
|
|
/* fastpath tx rings: tx_buf tx_desc */
|
|
BNX2X_FREE(bnx2x_fp(bp, i, tx_buf_ring));
|
|
BNX2X_PCI_FREE(bnx2x_fp(bp, i, tx_desc_ring),
|
|
bnx2x_fp(bp, i, tx_desc_mapping),
|
|
sizeof(union eth_tx_bd_types) * NUM_TX_BD);
|
|
}
|
|
/* end of fastpath */
|
|
|
|
BNX2X_PCI_FREE(bp->def_status_blk, bp->def_status_blk_mapping,
|
|
sizeof(struct host_def_status_block));
|
|
|
|
BNX2X_PCI_FREE(bp->slowpath, bp->slowpath_mapping,
|
|
sizeof(struct bnx2x_slowpath));
|
|
|
|
#ifdef BCM_CNIC
|
|
BNX2X_PCI_FREE(bp->t1, bp->t1_mapping, 64*1024);
|
|
BNX2X_PCI_FREE(bp->t2, bp->t2_mapping, 16*1024);
|
|
BNX2X_PCI_FREE(bp->timers, bp->timers_mapping, 8*1024);
|
|
BNX2X_PCI_FREE(bp->qm, bp->qm_mapping, 128*1024);
|
|
BNX2X_PCI_FREE(bp->cnic_sb, bp->cnic_sb_mapping,
|
|
sizeof(struct host_status_block));
|
|
#endif
|
|
BNX2X_PCI_FREE(bp->spq, bp->spq_mapping, BCM_PAGE_SIZE);
|
|
|
|
#undef BNX2X_PCI_FREE
|
|
#undef BNX2X_KFREE
|
|
}
|
|
|
|
int bnx2x_alloc_mem(struct bnx2x *bp)
|
|
{
|
|
|
|
#define BNX2X_PCI_ALLOC(x, y, size) \
|
|
do { \
|
|
x = dma_alloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL); \
|
|
if (x == NULL) \
|
|
goto alloc_mem_err; \
|
|
memset(x, 0, size); \
|
|
} while (0)
|
|
|
|
#define BNX2X_ALLOC(x, size) \
|
|
do { \
|
|
x = vmalloc(size); \
|
|
if (x == NULL) \
|
|
goto alloc_mem_err; \
|
|
memset(x, 0, size); \
|
|
} while (0)
|
|
|
|
int i;
|
|
|
|
/* fastpath */
|
|
/* Common */
|
|
for_each_queue(bp, i) {
|
|
bnx2x_fp(bp, i, bp) = bp;
|
|
|
|
/* status blocks */
|
|
BNX2X_PCI_ALLOC(bnx2x_fp(bp, i, status_blk),
|
|
&bnx2x_fp(bp, i, status_blk_mapping),
|
|
sizeof(struct host_status_block));
|
|
}
|
|
/* Rx */
|
|
for_each_queue(bp, i) {
|
|
|
|
/* fastpath rx rings: rx_buf rx_desc rx_comp */
|
|
BNX2X_ALLOC(bnx2x_fp(bp, i, rx_buf_ring),
|
|
sizeof(struct sw_rx_bd) * NUM_RX_BD);
|
|
BNX2X_PCI_ALLOC(bnx2x_fp(bp, i, rx_desc_ring),
|
|
&bnx2x_fp(bp, i, rx_desc_mapping),
|
|
sizeof(struct eth_rx_bd) * NUM_RX_BD);
|
|
|
|
BNX2X_PCI_ALLOC(bnx2x_fp(bp, i, rx_comp_ring),
|
|
&bnx2x_fp(bp, i, rx_comp_mapping),
|
|
sizeof(struct eth_fast_path_rx_cqe) *
|
|
NUM_RCQ_BD);
|
|
|
|
/* SGE ring */
|
|
BNX2X_ALLOC(bnx2x_fp(bp, i, rx_page_ring),
|
|
sizeof(struct sw_rx_page) * NUM_RX_SGE);
|
|
BNX2X_PCI_ALLOC(bnx2x_fp(bp, i, rx_sge_ring),
|
|
&bnx2x_fp(bp, i, rx_sge_mapping),
|
|
BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
|
|
}
|
|
/* Tx */
|
|
for_each_queue(bp, i) {
|
|
|
|
/* fastpath tx rings: tx_buf tx_desc */
|
|
BNX2X_ALLOC(bnx2x_fp(bp, i, tx_buf_ring),
|
|
sizeof(struct sw_tx_bd) * NUM_TX_BD);
|
|
BNX2X_PCI_ALLOC(bnx2x_fp(bp, i, tx_desc_ring),
|
|
&bnx2x_fp(bp, i, tx_desc_mapping),
|
|
sizeof(union eth_tx_bd_types) * NUM_TX_BD);
|
|
}
|
|
/* end of fastpath */
|
|
|
|
BNX2X_PCI_ALLOC(bp->def_status_blk, &bp->def_status_blk_mapping,
|
|
sizeof(struct host_def_status_block));
|
|
|
|
BNX2X_PCI_ALLOC(bp->slowpath, &bp->slowpath_mapping,
|
|
sizeof(struct bnx2x_slowpath));
|
|
|
|
#ifdef BCM_CNIC
|
|
BNX2X_PCI_ALLOC(bp->t1, &bp->t1_mapping, 64*1024);
|
|
|
|
/* allocate searcher T2 table
|
|
we allocate 1/4 of alloc num for T2
|
|
(which is not entered into the ILT) */
|
|
BNX2X_PCI_ALLOC(bp->t2, &bp->t2_mapping, 16*1024);
|
|
|
|
/* Initialize T2 (for 1024 connections) */
|
|
for (i = 0; i < 16*1024; i += 64)
|
|
*(u64 *)((char *)bp->t2 + i + 56) = bp->t2_mapping + i + 64;
|
|
|
|
/* Timer block array (8*MAX_CONN) phys uncached for now 1024 conns */
|
|
BNX2X_PCI_ALLOC(bp->timers, &bp->timers_mapping, 8*1024);
|
|
|
|
/* QM queues (128*MAX_CONN) */
|
|
BNX2X_PCI_ALLOC(bp->qm, &bp->qm_mapping, 128*1024);
|
|
|
|
BNX2X_PCI_ALLOC(bp->cnic_sb, &bp->cnic_sb_mapping,
|
|
sizeof(struct host_status_block));
|
|
#endif
|
|
|
|
/* Slow path ring */
|
|
BNX2X_PCI_ALLOC(bp->spq, &bp->spq_mapping, BCM_PAGE_SIZE);
|
|
|
|
return 0;
|
|
|
|
alloc_mem_err:
|
|
bnx2x_free_mem(bp);
|
|
return -ENOMEM;
|
|
|
|
#undef BNX2X_PCI_ALLOC
|
|
#undef BNX2X_ALLOC
|
|
}
|
|
|
|
|
|
/*
|
|
* Init service functions
|
|
*/
|
|
|
|
/**
|
|
* Sets a MAC in a CAM for a few L2 Clients for E1 chip
|
|
*
|
|
* @param bp driver descriptor
|
|
* @param set set or clear an entry (1 or 0)
|
|
* @param mac pointer to a buffer containing a MAC
|
|
* @param cl_bit_vec bit vector of clients to register a MAC for
|
|
* @param cam_offset offset in a CAM to use
|
|
* @param with_bcast set broadcast MAC as well
|
|
*/
|
|
static void bnx2x_set_mac_addr_e1_gen(struct bnx2x *bp, int set, u8 *mac,
|
|
u32 cl_bit_vec, u8 cam_offset,
|
|
u8 with_bcast)
|
|
{
|
|
struct mac_configuration_cmd *config = bnx2x_sp(bp, mac_config);
|
|
int port = BP_PORT(bp);
|
|
|
|
/* CAM allocation
|
|
* unicasts 0-31:port0 32-63:port1
|
|
* multicast 64-127:port0 128-191:port1
|
|
*/
|
|
config->hdr.length = 1 + (with_bcast ? 1 : 0);
|
|
config->hdr.offset = cam_offset;
|
|
config->hdr.client_id = 0xff;
|
|
config->hdr.reserved1 = 0;
|
|
|
|
/* primary MAC */
|
|
config->config_table[0].cam_entry.msb_mac_addr =
|
|
swab16(*(u16 *)&mac[0]);
|
|
config->config_table[0].cam_entry.middle_mac_addr =
|
|
swab16(*(u16 *)&mac[2]);
|
|
config->config_table[0].cam_entry.lsb_mac_addr =
|
|
swab16(*(u16 *)&mac[4]);
|
|
config->config_table[0].cam_entry.flags = cpu_to_le16(port);
|
|
if (set)
|
|
config->config_table[0].target_table_entry.flags = 0;
|
|
else
|
|
CAM_INVALIDATE(config->config_table[0]);
|
|
config->config_table[0].target_table_entry.clients_bit_vector =
|
|
cpu_to_le32(cl_bit_vec);
|
|
config->config_table[0].target_table_entry.vlan_id = 0;
|
|
|
|
DP(NETIF_MSG_IFUP, "%s MAC (%04x:%04x:%04x)\n",
|
|
(set ? "setting" : "clearing"),
|
|
config->config_table[0].cam_entry.msb_mac_addr,
|
|
config->config_table[0].cam_entry.middle_mac_addr,
|
|
config->config_table[0].cam_entry.lsb_mac_addr);
|
|
|
|
/* broadcast */
|
|
if (with_bcast) {
|
|
config->config_table[1].cam_entry.msb_mac_addr =
|
|
cpu_to_le16(0xffff);
|
|
config->config_table[1].cam_entry.middle_mac_addr =
|
|
cpu_to_le16(0xffff);
|
|
config->config_table[1].cam_entry.lsb_mac_addr =
|
|
cpu_to_le16(0xffff);
|
|
config->config_table[1].cam_entry.flags = cpu_to_le16(port);
|
|
if (set)
|
|
config->config_table[1].target_table_entry.flags =
|
|
TSTORM_CAM_TARGET_TABLE_ENTRY_BROADCAST;
|
|
else
|
|
CAM_INVALIDATE(config->config_table[1]);
|
|
config->config_table[1].target_table_entry.clients_bit_vector =
|
|
cpu_to_le32(cl_bit_vec);
|
|
config->config_table[1].target_table_entry.vlan_id = 0;
|
|
}
|
|
|
|
bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0,
|
|
U64_HI(bnx2x_sp_mapping(bp, mac_config)),
|
|
U64_LO(bnx2x_sp_mapping(bp, mac_config)), 0);
|
|
}
|
|
|
|
/**
|
|
* Sets a MAC in a CAM for a few L2 Clients for E1H chip
|
|
*
|
|
* @param bp driver descriptor
|
|
* @param set set or clear an entry (1 or 0)
|
|
* @param mac pointer to a buffer containing a MAC
|
|
* @param cl_bit_vec bit vector of clients to register a MAC for
|
|
* @param cam_offset offset in a CAM to use
|
|
*/
|
|
static void bnx2x_set_mac_addr_e1h_gen(struct bnx2x *bp, int set, u8 *mac,
|
|
u32 cl_bit_vec, u8 cam_offset)
|
|
{
|
|
struct mac_configuration_cmd_e1h *config =
|
|
(struct mac_configuration_cmd_e1h *)bnx2x_sp(bp, mac_config);
|
|
|
|
config->hdr.length = 1;
|
|
config->hdr.offset = cam_offset;
|
|
config->hdr.client_id = 0xff;
|
|
config->hdr.reserved1 = 0;
|
|
|
|
/* primary MAC */
|
|
config->config_table[0].msb_mac_addr =
|
|
swab16(*(u16 *)&mac[0]);
|
|
config->config_table[0].middle_mac_addr =
|
|
swab16(*(u16 *)&mac[2]);
|
|
config->config_table[0].lsb_mac_addr =
|
|
swab16(*(u16 *)&mac[4]);
|
|
config->config_table[0].clients_bit_vector =
|
|
cpu_to_le32(cl_bit_vec);
|
|
config->config_table[0].vlan_id = 0;
|
|
config->config_table[0].e1hov_id = cpu_to_le16(bp->e1hov);
|
|
if (set)
|
|
config->config_table[0].flags = BP_PORT(bp);
|
|
else
|
|
config->config_table[0].flags =
|
|
MAC_CONFIGURATION_ENTRY_E1H_ACTION_TYPE;
|
|
|
|
DP(NETIF_MSG_IFUP, "%s MAC (%04x:%04x:%04x) E1HOV %d CLID mask %d\n",
|
|
(set ? "setting" : "clearing"),
|
|
config->config_table[0].msb_mac_addr,
|
|
config->config_table[0].middle_mac_addr,
|
|
config->config_table[0].lsb_mac_addr, bp->e1hov, cl_bit_vec);
|
|
|
|
bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0,
|
|
U64_HI(bnx2x_sp_mapping(bp, mac_config)),
|
|
U64_LO(bnx2x_sp_mapping(bp, mac_config)), 0);
|
|
}
|
|
|
|
static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx,
|
|
int *state_p, int poll)
|
|
{
|
|
/* can take a while if any port is running */
|
|
int cnt = 5000;
|
|
|
|
DP(NETIF_MSG_IFUP, "%s for state to become %x on IDX [%d]\n",
|
|
poll ? "polling" : "waiting", state, idx);
|
|
|
|
might_sleep();
|
|
while (cnt--) {
|
|
if (poll) {
|
|
bnx2x_rx_int(bp->fp, 10);
|
|
/* if index is different from 0
|
|
* the reply for some commands will
|
|
* be on the non default queue
|
|
*/
|
|
if (idx)
|
|
bnx2x_rx_int(&bp->fp[idx], 10);
|
|
}
|
|
|
|
mb(); /* state is changed by bnx2x_sp_event() */
|
|
if (*state_p == state) {
|
|
#ifdef BNX2X_STOP_ON_ERROR
|
|
DP(NETIF_MSG_IFUP, "exit (cnt %d)\n", 5000 - cnt);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
msleep(1);
|
|
|
|
if (bp->panic)
|
|
return -EIO;
|
|
}
|
|
|
|
/* timeout! */
|
|
BNX2X_ERR("timeout %s for state %x on IDX [%d]\n",
|
|
poll ? "polling" : "waiting", state, idx);
|
|
#ifdef BNX2X_STOP_ON_ERROR
|
|
bnx2x_panic();
|
|
#endif
|
|
|
|
return -EBUSY;
|
|
}
|
|
|
|
void bnx2x_set_eth_mac_addr_e1h(struct bnx2x *bp, int set)
|
|
{
|
|
bp->set_mac_pending++;
|
|
smp_wmb();
|
|
|
|
bnx2x_set_mac_addr_e1h_gen(bp, set, bp->dev->dev_addr,
|
|
(1 << bp->fp->cl_id), BP_FUNC(bp));
|
|
|
|
/* Wait for a completion */
|
|
bnx2x_wait_ramrod(bp, 0, 0, &bp->set_mac_pending, set ? 0 : 1);
|
|
}
|
|
|
|
void bnx2x_set_eth_mac_addr_e1(struct bnx2x *bp, int set)
|
|
{
|
|
bp->set_mac_pending++;
|
|
smp_wmb();
|
|
|
|
bnx2x_set_mac_addr_e1_gen(bp, set, bp->dev->dev_addr,
|
|
(1 << bp->fp->cl_id), (BP_PORT(bp) ? 32 : 0),
|
|
1);
|
|
|
|
/* Wait for a completion */
|
|
bnx2x_wait_ramrod(bp, 0, 0, &bp->set_mac_pending, set ? 0 : 1);
|
|
}
|
|
|
|
#ifdef BCM_CNIC
|
|
/**
|
|
* Set iSCSI MAC(s) at the next enties in the CAM after the ETH
|
|
* MAC(s). This function will wait until the ramdord completion
|
|
* returns.
|
|
*
|
|
* @param bp driver handle
|
|
* @param set set or clear the CAM entry
|
|
*
|
|
* @return 0 if cussess, -ENODEV if ramrod doesn't return.
|
|
*/
|
|
int bnx2x_set_iscsi_eth_mac_addr(struct bnx2x *bp, int set)
|
|
{
|
|
u32 cl_bit_vec = (1 << BCM_ISCSI_ETH_CL_ID);
|
|
|
|
bp->set_mac_pending++;
|
|
smp_wmb();
|
|
|
|
/* Send a SET_MAC ramrod */
|
|
if (CHIP_IS_E1(bp))
|
|
bnx2x_set_mac_addr_e1_gen(bp, set, bp->iscsi_mac,
|
|
cl_bit_vec, (BP_PORT(bp) ? 32 : 0) + 2,
|
|
1);
|
|
else
|
|
/* CAM allocation for E1H
|
|
* unicasts: by func number
|
|
* multicast: 20+FUNC*20, 20 each
|
|
*/
|
|
bnx2x_set_mac_addr_e1h_gen(bp, set, bp->iscsi_mac,
|
|
cl_bit_vec, E1H_FUNC_MAX + BP_FUNC(bp));
|
|
|
|
/* Wait for a completion when setting */
|
|
bnx2x_wait_ramrod(bp, 0, 0, &bp->set_mac_pending, set ? 0 : 1);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int bnx2x_setup_leading(struct bnx2x *bp)
|
|
{
|
|
int rc;
|
|
|
|
/* reset IGU state */
|
|
bnx2x_ack_sb(bp, bp->fp[0].sb_id, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
|
|
|
|
/* SETUP ramrod */
|
|
bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_PORT_SETUP, 0, 0, 0, 0);
|
|
|
|
/* Wait for completion */
|
|
rc = bnx2x_wait_ramrod(bp, BNX2X_STATE_OPEN, 0, &(bp->state), 0);
|
|
|
|
return rc;
|
|
}
|
|
|
|
int bnx2x_setup_multi(struct bnx2x *bp, int index)
|
|
{
|
|
struct bnx2x_fastpath *fp = &bp->fp[index];
|
|
|
|
/* reset IGU state */
|
|
bnx2x_ack_sb(bp, fp->sb_id, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
|
|
|
|
/* SETUP ramrod */
|
|
fp->state = BNX2X_FP_STATE_OPENING;
|
|
bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_CLIENT_SETUP, index, 0,
|
|
fp->cl_id, 0);
|
|
|
|
/* Wait for completion */
|
|
return bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_OPEN, index,
|
|
&(fp->state), 0);
|
|
}
|
|
|
|
|
|
void bnx2x_set_num_queues_msix(struct bnx2x *bp)
|
|
{
|
|
|
|
switch (bp->multi_mode) {
|
|
case ETH_RSS_MODE_DISABLED:
|
|
bp->num_queues = 1;
|
|
break;
|
|
|
|
case ETH_RSS_MODE_REGULAR:
|
|
if (num_queues)
|
|
bp->num_queues = min_t(u32, num_queues,
|
|
BNX2X_MAX_QUEUES(bp));
|
|
else
|
|
bp->num_queues = min_t(u32, num_online_cpus(),
|
|
BNX2X_MAX_QUEUES(bp));
|
|
break;
|
|
|
|
|
|
default:
|
|
bp->num_queues = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
|
|
static int bnx2x_stop_multi(struct bnx2x *bp, int index)
|
|
{
|
|
struct bnx2x_fastpath *fp = &bp->fp[index];
|
|
int rc;
|
|
|
|
/* halt the connection */
|
|
fp->state = BNX2X_FP_STATE_HALTING;
|
|
bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_HALT, index, 0, fp->cl_id, 0);
|
|
|
|
/* Wait for completion */
|
|
rc = bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_HALTED, index,
|
|
&(fp->state), 1);
|
|
if (rc) /* timeout */
|
|
return rc;
|
|
|
|
/* delete cfc entry */
|
|
bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_CFC_DEL, index, 0, 0, 1);
|
|
|
|
/* Wait for completion */
|
|
rc = bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_CLOSED, index,
|
|
&(fp->state), 1);
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_stop_leading(struct bnx2x *bp)
|
|
{
|
|
__le16 dsb_sp_prod_idx;
|
|
/* if the other port is handling traffic,
|
|
this can take a lot of time */
|
|
int cnt = 500;
|
|
int rc;
|
|
|
|
might_sleep();
|
|
|
|
/* Send HALT ramrod */
|
|
bp->fp[0].state = BNX2X_FP_STATE_HALTING;
|
|
bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_HALT, 0, 0, bp->fp->cl_id, 0);
|
|
|
|
/* Wait for completion */
|
|
rc = bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_HALTED, 0,
|
|
&(bp->fp[0].state), 1);
|
|
if (rc) /* timeout */
|
|
return rc;
|
|
|
|
dsb_sp_prod_idx = *bp->dsb_sp_prod;
|
|
|
|
/* Send PORT_DELETE ramrod */
|
|
bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_PORT_DEL, 0, 0, 0, 1);
|
|
|
|
/* Wait for completion to arrive on default status block
|
|
we are going to reset the chip anyway
|
|
so there is not much to do if this times out
|
|
*/
|
|
while (dsb_sp_prod_idx == *bp->dsb_sp_prod) {
|
|
if (!cnt) {
|
|
DP(NETIF_MSG_IFDOWN, "timeout waiting for port del "
|
|
"dsb_sp_prod 0x%x != dsb_sp_prod_idx 0x%x\n",
|
|
*bp->dsb_sp_prod, dsb_sp_prod_idx);
|
|
#ifdef BNX2X_STOP_ON_ERROR
|
|
bnx2x_panic();
|
|
#endif
|
|
rc = -EBUSY;
|
|
break;
|
|
}
|
|
cnt--;
|
|
msleep(1);
|
|
rmb(); /* Refresh the dsb_sp_prod */
|
|
}
|
|
bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD;
|
|
bp->fp[0].state = BNX2X_FP_STATE_CLOSED;
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void bnx2x_reset_func(struct bnx2x *bp)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
int func = BP_FUNC(bp);
|
|
int base, i;
|
|
|
|
/* Configure IGU */
|
|
REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
|
|
REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
|
|
|
|
#ifdef BCM_CNIC
|
|
/* Disable Timer scan */
|
|
REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 0);
|
|
/*
|
|
* Wait for at least 10ms and up to 2 second for the timers scan to
|
|
* complete
|
|
*/
|
|
for (i = 0; i < 200; i++) {
|
|
msleep(10);
|
|
if (!REG_RD(bp, TM_REG_LIN0_SCAN_ON + port*4))
|
|
break;
|
|
}
|
|
#endif
|
|
/* Clear ILT */
|
|
base = FUNC_ILT_BASE(func);
|
|
for (i = base; i < base + ILT_PER_FUNC; i++)
|
|
bnx2x_ilt_wr(bp, i, 0);
|
|
}
|
|
|
|
static void bnx2x_reset_port(struct bnx2x *bp)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
u32 val;
|
|
|
|
REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0);
|
|
|
|
/* Do not rcv packets to BRB */
|
|
REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK + port*4, 0x0);
|
|
/* Do not direct rcv packets that are not for MCP to the BRB */
|
|
REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_NOT_MCP :
|
|
NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);
|
|
|
|
/* Configure AEU */
|
|
REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, 0);
|
|
|
|
msleep(100);
|
|
/* Check for BRB port occupancy */
|
|
val = REG_RD(bp, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port*4);
|
|
if (val)
|
|
DP(NETIF_MSG_IFDOWN,
|
|
"BRB1 is not empty %d blocks are occupied\n", val);
|
|
|
|
/* TODO: Close Doorbell port? */
|
|
}
|
|
|
|
static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code)
|
|
{
|
|
DP(BNX2X_MSG_MCP, "function %d reset_code %x\n",
|
|
BP_FUNC(bp), reset_code);
|
|
|
|
switch (reset_code) {
|
|
case FW_MSG_CODE_DRV_UNLOAD_COMMON:
|
|
bnx2x_reset_port(bp);
|
|
bnx2x_reset_func(bp);
|
|
bnx2x_reset_common(bp);
|
|
break;
|
|
|
|
case FW_MSG_CODE_DRV_UNLOAD_PORT:
|
|
bnx2x_reset_port(bp);
|
|
bnx2x_reset_func(bp);
|
|
break;
|
|
|
|
case FW_MSG_CODE_DRV_UNLOAD_FUNCTION:
|
|
bnx2x_reset_func(bp);
|
|
break;
|
|
|
|
default:
|
|
BNX2X_ERR("Unknown reset_code (0x%x) from MCP\n", reset_code);
|
|
break;
|
|
}
|
|
}
|
|
|
|
void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
u32 reset_code = 0;
|
|
int i, cnt, rc;
|
|
|
|
/* Wait until tx fastpath tasks complete */
|
|
for_each_queue(bp, i) {
|
|
struct bnx2x_fastpath *fp = &bp->fp[i];
|
|
|
|
cnt = 1000;
|
|
while (bnx2x_has_tx_work_unload(fp)) {
|
|
|
|
bnx2x_tx_int(fp);
|
|
if (!cnt) {
|
|
BNX2X_ERR("timeout waiting for queue[%d]\n",
|
|
i);
|
|
#ifdef BNX2X_STOP_ON_ERROR
|
|
bnx2x_panic();
|
|
return -EBUSY;
|
|
#else
|
|
break;
|
|
#endif
|
|
}
|
|
cnt--;
|
|
msleep(1);
|
|
}
|
|
}
|
|
/* Give HW time to discard old tx messages */
|
|
msleep(1);
|
|
|
|
if (CHIP_IS_E1(bp)) {
|
|
struct mac_configuration_cmd *config =
|
|
bnx2x_sp(bp, mcast_config);
|
|
|
|
bnx2x_set_eth_mac_addr_e1(bp, 0);
|
|
|
|
for (i = 0; i < config->hdr.length; i++)
|
|
CAM_INVALIDATE(config->config_table[i]);
|
|
|
|
config->hdr.length = i;
|
|
if (CHIP_REV_IS_SLOW(bp))
|
|
config->hdr.offset = BNX2X_MAX_EMUL_MULTI*(1 + port);
|
|
else
|
|
config->hdr.offset = BNX2X_MAX_MULTICAST*(1 + port);
|
|
config->hdr.client_id = bp->fp->cl_id;
|
|
config->hdr.reserved1 = 0;
|
|
|
|
bp->set_mac_pending++;
|
|
smp_wmb();
|
|
|
|
bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0,
|
|
U64_HI(bnx2x_sp_mapping(bp, mcast_config)),
|
|
U64_LO(bnx2x_sp_mapping(bp, mcast_config)), 0);
|
|
|
|
} else { /* E1H */
|
|
REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
|
|
|
|
bnx2x_set_eth_mac_addr_e1h(bp, 0);
|
|
|
|
for (i = 0; i < MC_HASH_SIZE; i++)
|
|
REG_WR(bp, MC_HASH_OFFSET(bp, i), 0);
|
|
|
|
REG_WR(bp, MISC_REG_E1HMF_MODE, 0);
|
|
}
|
|
#ifdef BCM_CNIC
|
|
/* Clear iSCSI L2 MAC */
|
|
mutex_lock(&bp->cnic_mutex);
|
|
if (bp->cnic_flags & BNX2X_CNIC_FLAG_MAC_SET) {
|
|
bnx2x_set_iscsi_eth_mac_addr(bp, 0);
|
|
bp->cnic_flags &= ~BNX2X_CNIC_FLAG_MAC_SET;
|
|
}
|
|
mutex_unlock(&bp->cnic_mutex);
|
|
#endif
|
|
|
|
if (unload_mode == UNLOAD_NORMAL)
|
|
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
|
|
|
|
else if (bp->flags & NO_WOL_FLAG)
|
|
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP;
|
|
|
|
else if (bp->wol) {
|
|
u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
|
|
u8 *mac_addr = bp->dev->dev_addr;
|
|
u32 val;
|
|
/* The mac address is written to entries 1-4 to
|
|
preserve entry 0 which is used by the PMF */
|
|
u8 entry = (BP_E1HVN(bp) + 1)*8;
|
|
|
|
val = (mac_addr[0] << 8) | mac_addr[1];
|
|
EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val);
|
|
|
|
val = (mac_addr[2] << 24) | (mac_addr[3] << 16) |
|
|
(mac_addr[4] << 8) | mac_addr[5];
|
|
EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val);
|
|
|
|
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN;
|
|
|
|
} else
|
|
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
|
|
|
|
/* Close multi and leading connections
|
|
Completions for ramrods are collected in a synchronous way */
|
|
for_each_nondefault_queue(bp, i)
|
|
if (bnx2x_stop_multi(bp, i))
|
|
goto unload_error;
|
|
|
|
rc = bnx2x_stop_leading(bp);
|
|
if (rc) {
|
|
BNX2X_ERR("Stop leading failed!\n");
|
|
#ifdef BNX2X_STOP_ON_ERROR
|
|
return -EBUSY;
|
|
#else
|
|
goto unload_error;
|
|
#endif
|
|
}
|
|
|
|
unload_error:
|
|
if (!BP_NOMCP(bp))
|
|
reset_code = bnx2x_fw_command(bp, reset_code);
|
|
else {
|
|
DP(NETIF_MSG_IFDOWN, "NO MCP - load counts %d, %d, %d\n",
|
|
load_count[0], load_count[1], load_count[2]);
|
|
load_count[0]--;
|
|
load_count[1 + port]--;
|
|
DP(NETIF_MSG_IFDOWN, "NO MCP - new load counts %d, %d, %d\n",
|
|
load_count[0], load_count[1], load_count[2]);
|
|
if (load_count[0] == 0)
|
|
reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON;
|
|
else if (load_count[1 + port] == 0)
|
|
reset_code = FW_MSG_CODE_DRV_UNLOAD_PORT;
|
|
else
|
|
reset_code = FW_MSG_CODE_DRV_UNLOAD_FUNCTION;
|
|
}
|
|
|
|
if ((reset_code == FW_MSG_CODE_DRV_UNLOAD_COMMON) ||
|
|
(reset_code == FW_MSG_CODE_DRV_UNLOAD_PORT))
|
|
bnx2x__link_reset(bp);
|
|
|
|
/* Reset the chip */
|
|
bnx2x_reset_chip(bp, reset_code);
|
|
|
|
/* Report UNLOAD_DONE to MCP */
|
|
if (!BP_NOMCP(bp))
|
|
bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
|
|
|
|
}
|
|
|
|
void bnx2x_disable_close_the_gate(struct bnx2x *bp)
|
|
{
|
|
u32 val;
|
|
|
|
DP(NETIF_MSG_HW, "Disabling \"close the gates\"\n");
|
|
|
|
if (CHIP_IS_E1(bp)) {
|
|
int port = BP_PORT(bp);
|
|
u32 addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
|
|
MISC_REG_AEU_MASK_ATTN_FUNC_0;
|
|
|
|
val = REG_RD(bp, addr);
|
|
val &= ~(0x300);
|
|
REG_WR(bp, addr, val);
|
|
} else if (CHIP_IS_E1H(bp)) {
|
|
val = REG_RD(bp, MISC_REG_AEU_GENERAL_MASK);
|
|
val &= ~(MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK |
|
|
MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK);
|
|
REG_WR(bp, MISC_REG_AEU_GENERAL_MASK, val);
|
|
}
|
|
}
|
|
|
|
|
|
/* Close gates #2, #3 and #4: */
|
|
static void bnx2x_set_234_gates(struct bnx2x *bp, bool close)
|
|
{
|
|
u32 val, addr;
|
|
|
|
/* Gates #2 and #4a are closed/opened for "not E1" only */
|
|
if (!CHIP_IS_E1(bp)) {
|
|
/* #4 */
|
|
val = REG_RD(bp, PXP_REG_HST_DISCARD_DOORBELLS);
|
|
REG_WR(bp, PXP_REG_HST_DISCARD_DOORBELLS,
|
|
close ? (val | 0x1) : (val & (~(u32)1)));
|
|
/* #2 */
|
|
val = REG_RD(bp, PXP_REG_HST_DISCARD_INTERNAL_WRITES);
|
|
REG_WR(bp, PXP_REG_HST_DISCARD_INTERNAL_WRITES,
|
|
close ? (val | 0x1) : (val & (~(u32)1)));
|
|
}
|
|
|
|
/* #3 */
|
|
addr = BP_PORT(bp) ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
|
|
val = REG_RD(bp, addr);
|
|
REG_WR(bp, addr, (!close) ? (val | 0x1) : (val & (~(u32)1)));
|
|
|
|
DP(NETIF_MSG_HW, "%s gates #2, #3 and #4\n",
|
|
close ? "closing" : "opening");
|
|
mmiowb();
|
|
}
|
|
|
|
#define SHARED_MF_CLP_MAGIC 0x80000000 /* `magic' bit */
|
|
|
|
static void bnx2x_clp_reset_prep(struct bnx2x *bp, u32 *magic_val)
|
|
{
|
|
/* Do some magic... */
|
|
u32 val = MF_CFG_RD(bp, shared_mf_config.clp_mb);
|
|
*magic_val = val & SHARED_MF_CLP_MAGIC;
|
|
MF_CFG_WR(bp, shared_mf_config.clp_mb, val | SHARED_MF_CLP_MAGIC);
|
|
}
|
|
|
|
/* Restore the value of the `magic' bit.
|
|
*
|
|
* @param pdev Device handle.
|
|
* @param magic_val Old value of the `magic' bit.
|
|
*/
|
|
static void bnx2x_clp_reset_done(struct bnx2x *bp, u32 magic_val)
|
|
{
|
|
/* Restore the `magic' bit value... */
|
|
/* u32 val = SHMEM_RD(bp, mf_cfg.shared_mf_config.clp_mb);
|
|
SHMEM_WR(bp, mf_cfg.shared_mf_config.clp_mb,
|
|
(val & (~SHARED_MF_CLP_MAGIC)) | magic_val); */
|
|
u32 val = MF_CFG_RD(bp, shared_mf_config.clp_mb);
|
|
MF_CFG_WR(bp, shared_mf_config.clp_mb,
|
|
(val & (~SHARED_MF_CLP_MAGIC)) | magic_val);
|
|
}
|
|
|
|
/* Prepares for MCP reset: takes care of CLP configurations.
|
|
*
|
|
* @param bp
|
|
* @param magic_val Old value of 'magic' bit.
|
|
*/
|
|
static void bnx2x_reset_mcp_prep(struct bnx2x *bp, u32 *magic_val)
|
|
{
|
|
u32 shmem;
|
|
u32 validity_offset;
|
|
|
|
DP(NETIF_MSG_HW, "Starting\n");
|
|
|
|
/* Set `magic' bit in order to save MF config */
|
|
if (!CHIP_IS_E1(bp))
|
|
bnx2x_clp_reset_prep(bp, magic_val);
|
|
|
|
/* Get shmem offset */
|
|
shmem = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
|
|
validity_offset = offsetof(struct shmem_region, validity_map[0]);
|
|
|
|
/* Clear validity map flags */
|
|
if (shmem > 0)
|
|
REG_WR(bp, shmem + validity_offset, 0);
|
|
}
|
|
|
|
#define MCP_TIMEOUT 5000 /* 5 seconds (in ms) */
|
|
#define MCP_ONE_TIMEOUT 100 /* 100 ms */
|
|
|
|
/* Waits for MCP_ONE_TIMEOUT or MCP_ONE_TIMEOUT*10,
|
|
* depending on the HW type.
|
|
*
|
|
* @param bp
|
|
*/
|
|
static inline void bnx2x_mcp_wait_one(struct bnx2x *bp)
|
|
{
|
|
/* special handling for emulation and FPGA,
|
|
wait 10 times longer */
|
|
if (CHIP_REV_IS_SLOW(bp))
|
|
msleep(MCP_ONE_TIMEOUT*10);
|
|
else
|
|
msleep(MCP_ONE_TIMEOUT);
|
|
}
|
|
|
|
static int bnx2x_reset_mcp_comp(struct bnx2x *bp, u32 magic_val)
|
|
{
|
|
u32 shmem, cnt, validity_offset, val;
|
|
int rc = 0;
|
|
|
|
msleep(100);
|
|
|
|
/* Get shmem offset */
|
|
shmem = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
|
|
if (shmem == 0) {
|
|
BNX2X_ERR("Shmem 0 return failure\n");
|
|
rc = -ENOTTY;
|
|
goto exit_lbl;
|
|
}
|
|
|
|
validity_offset = offsetof(struct shmem_region, validity_map[0]);
|
|
|
|
/* Wait for MCP to come up */
|
|
for (cnt = 0; cnt < (MCP_TIMEOUT / MCP_ONE_TIMEOUT); cnt++) {
|
|
/* TBD: its best to check validity map of last port.
|
|
* currently checks on port 0.
|
|
*/
|
|
val = REG_RD(bp, shmem + validity_offset);
|
|
DP(NETIF_MSG_HW, "shmem 0x%x validity map(0x%x)=0x%x\n", shmem,
|
|
shmem + validity_offset, val);
|
|
|
|
/* check that shared memory is valid. */
|
|
if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
|
|
== (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
|
|
break;
|
|
|
|
bnx2x_mcp_wait_one(bp);
|
|
}
|
|
|
|
DP(NETIF_MSG_HW, "Cnt=%d Shmem validity map 0x%x\n", cnt, val);
|
|
|
|
/* Check that shared memory is valid. This indicates that MCP is up. */
|
|
if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) !=
|
|
(SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) {
|
|
BNX2X_ERR("Shmem signature not present. MCP is not up !!\n");
|
|
rc = -ENOTTY;
|
|
goto exit_lbl;
|
|
}
|
|
|
|
exit_lbl:
|
|
/* Restore the `magic' bit value */
|
|
if (!CHIP_IS_E1(bp))
|
|
bnx2x_clp_reset_done(bp, magic_val);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void bnx2x_pxp_prep(struct bnx2x *bp)
|
|
{
|
|
if (!CHIP_IS_E1(bp)) {
|
|
REG_WR(bp, PXP2_REG_RD_START_INIT, 0);
|
|
REG_WR(bp, PXP2_REG_RQ_RBC_DONE, 0);
|
|
REG_WR(bp, PXP2_REG_RQ_CFG_DONE, 0);
|
|
mmiowb();
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Reset the whole chip except for:
|
|
* - PCIE core
|
|
* - PCI Glue, PSWHST, PXP/PXP2 RF (all controlled by
|
|
* one reset bit)
|
|
* - IGU
|
|
* - MISC (including AEU)
|
|
* - GRC
|
|
* - RBCN, RBCP
|
|
*/
|
|
static void bnx2x_process_kill_chip_reset(struct bnx2x *bp)
|
|
{
|
|
u32 not_reset_mask1, reset_mask1, not_reset_mask2, reset_mask2;
|
|
|
|
not_reset_mask1 =
|
|
MISC_REGISTERS_RESET_REG_1_RST_HC |
|
|
MISC_REGISTERS_RESET_REG_1_RST_PXPV |
|
|
MISC_REGISTERS_RESET_REG_1_RST_PXP;
|
|
|
|
not_reset_mask2 =
|
|
MISC_REGISTERS_RESET_REG_2_RST_MDIO |
|
|
MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE |
|
|
MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE |
|
|
MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE |
|
|
MISC_REGISTERS_RESET_REG_2_RST_RBCN |
|
|
MISC_REGISTERS_RESET_REG_2_RST_GRC |
|
|
MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE |
|
|
MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B;
|
|
|
|
reset_mask1 = 0xffffffff;
|
|
|
|
if (CHIP_IS_E1(bp))
|
|
reset_mask2 = 0xffff;
|
|
else
|
|
reset_mask2 = 0x1ffff;
|
|
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
|
|
reset_mask1 & (~not_reset_mask1));
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
|
|
reset_mask2 & (~not_reset_mask2));
|
|
|
|
barrier();
|
|
mmiowb();
|
|
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, reset_mask1);
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, reset_mask2);
|
|
mmiowb();
|
|
}
|
|
|
|
static int bnx2x_process_kill(struct bnx2x *bp)
|
|
{
|
|
int cnt = 1000;
|
|
u32 val = 0;
|
|
u32 sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, pgl_exp_rom2;
|
|
|
|
|
|
/* Empty the Tetris buffer, wait for 1s */
|
|
do {
|
|
sr_cnt = REG_RD(bp, PXP2_REG_RD_SR_CNT);
|
|
blk_cnt = REG_RD(bp, PXP2_REG_RD_BLK_CNT);
|
|
port_is_idle_0 = REG_RD(bp, PXP2_REG_RD_PORT_IS_IDLE_0);
|
|
port_is_idle_1 = REG_RD(bp, PXP2_REG_RD_PORT_IS_IDLE_1);
|
|
pgl_exp_rom2 = REG_RD(bp, PXP2_REG_PGL_EXP_ROM2);
|
|
if ((sr_cnt == 0x7e) && (blk_cnt == 0xa0) &&
|
|
((port_is_idle_0 & 0x1) == 0x1) &&
|
|
((port_is_idle_1 & 0x1) == 0x1) &&
|
|
(pgl_exp_rom2 == 0xffffffff))
|
|
break;
|
|
msleep(1);
|
|
} while (cnt-- > 0);
|
|
|
|
if (cnt <= 0) {
|
|
DP(NETIF_MSG_HW, "Tetris buffer didn't get empty or there"
|
|
" are still"
|
|
" outstanding read requests after 1s!\n");
|
|
DP(NETIF_MSG_HW, "sr_cnt=0x%08x, blk_cnt=0x%08x,"
|
|
" port_is_idle_0=0x%08x,"
|
|
" port_is_idle_1=0x%08x, pgl_exp_rom2=0x%08x\n",
|
|
sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1,
|
|
pgl_exp_rom2);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
barrier();
|
|
|
|
/* Close gates #2, #3 and #4 */
|
|
bnx2x_set_234_gates(bp, true);
|
|
|
|
/* TBD: Indicate that "process kill" is in progress to MCP */
|
|
|
|
/* Clear "unprepared" bit */
|
|
REG_WR(bp, MISC_REG_UNPREPARED, 0);
|
|
barrier();
|
|
|
|
/* Make sure all is written to the chip before the reset */
|
|
mmiowb();
|
|
|
|
/* Wait for 1ms to empty GLUE and PCI-E core queues,
|
|
* PSWHST, GRC and PSWRD Tetris buffer.
|
|
*/
|
|
msleep(1);
|
|
|
|
/* Prepare to chip reset: */
|
|
/* MCP */
|
|
bnx2x_reset_mcp_prep(bp, &val);
|
|
|
|
/* PXP */
|
|
bnx2x_pxp_prep(bp);
|
|
barrier();
|
|
|
|
/* reset the chip */
|
|
bnx2x_process_kill_chip_reset(bp);
|
|
barrier();
|
|
|
|
/* Recover after reset: */
|
|
/* MCP */
|
|
if (bnx2x_reset_mcp_comp(bp, val))
|
|
return -EAGAIN;
|
|
|
|
/* PXP */
|
|
bnx2x_pxp_prep(bp);
|
|
|
|
/* Open the gates #2, #3 and #4 */
|
|
bnx2x_set_234_gates(bp, false);
|
|
|
|
/* TBD: IGU/AEU preparation bring back the AEU/IGU to a
|
|
* reset state, re-enable attentions. */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_leader_reset(struct bnx2x *bp)
|
|
{
|
|
int rc = 0;
|
|
/* Try to recover after the failure */
|
|
if (bnx2x_process_kill(bp)) {
|
|
printk(KERN_ERR "%s: Something bad had happen! Aii!\n",
|
|
bp->dev->name);
|
|
rc = -EAGAIN;
|
|
goto exit_leader_reset;
|
|
}
|
|
|
|
/* Clear "reset is in progress" bit and update the driver state */
|
|
bnx2x_set_reset_done(bp);
|
|
bp->recovery_state = BNX2X_RECOVERY_DONE;
|
|
|
|
exit_leader_reset:
|
|
bp->is_leader = 0;
|
|
bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESERVED_08);
|
|
smp_wmb();
|
|
return rc;
|
|
}
|
|
|
|
/* Assumption: runs under rtnl lock. This together with the fact
|
|
* that it's called only from bnx2x_reset_task() ensure that it
|
|
* will never be called when netif_running(bp->dev) is false.
|
|
*/
|
|
static void bnx2x_parity_recover(struct bnx2x *bp)
|
|
{
|
|
DP(NETIF_MSG_HW, "Handling parity\n");
|
|
while (1) {
|
|
switch (bp->recovery_state) {
|
|
case BNX2X_RECOVERY_INIT:
|
|
DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_INIT\n");
|
|
/* Try to get a LEADER_LOCK HW lock */
|
|
if (bnx2x_trylock_hw_lock(bp,
|
|
HW_LOCK_RESOURCE_RESERVED_08))
|
|
bp->is_leader = 1;
|
|
|
|
/* Stop the driver */
|
|
/* If interface has been removed - break */
|
|
if (bnx2x_nic_unload(bp, UNLOAD_RECOVERY))
|
|
return;
|
|
|
|
bp->recovery_state = BNX2X_RECOVERY_WAIT;
|
|
/* Ensure "is_leader" and "recovery_state"
|
|
* update values are seen on other CPUs
|
|
*/
|
|
smp_wmb();
|
|
break;
|
|
|
|
case BNX2X_RECOVERY_WAIT:
|
|
DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_WAIT\n");
|
|
if (bp->is_leader) {
|
|
u32 load_counter = bnx2x_get_load_cnt(bp);
|
|
if (load_counter) {
|
|
/* Wait until all other functions get
|
|
* down.
|
|
*/
|
|
schedule_delayed_work(&bp->reset_task,
|
|
HZ/10);
|
|
return;
|
|
} else {
|
|
/* If all other functions got down -
|
|
* try to bring the chip back to
|
|
* normal. In any case it's an exit
|
|
* point for a leader.
|
|
*/
|
|
if (bnx2x_leader_reset(bp) ||
|
|
bnx2x_nic_load(bp, LOAD_NORMAL)) {
|
|
printk(KERN_ERR"%s: Recovery "
|
|
"has failed. Power cycle is "
|
|
"needed.\n", bp->dev->name);
|
|
/* Disconnect this device */
|
|
netif_device_detach(bp->dev);
|
|
/* Block ifup for all function
|
|
* of this ASIC until
|
|
* "process kill" or power
|
|
* cycle.
|
|
*/
|
|
bnx2x_set_reset_in_progress(bp);
|
|
/* Shut down the power */
|
|
bnx2x_set_power_state(bp,
|
|
PCI_D3hot);
|
|
return;
|
|
}
|
|
|
|
return;
|
|
}
|
|
} else { /* non-leader */
|
|
if (!bnx2x_reset_is_done(bp)) {
|
|
/* Try to get a LEADER_LOCK HW lock as
|
|
* long as a former leader may have
|
|
* been unloaded by the user or
|
|
* released a leadership by another
|
|
* reason.
|
|
*/
|
|
if (bnx2x_trylock_hw_lock(bp,
|
|
HW_LOCK_RESOURCE_RESERVED_08)) {
|
|
/* I'm a leader now! Restart a
|
|
* switch case.
|
|
*/
|
|
bp->is_leader = 1;
|
|
break;
|
|
}
|
|
|
|
schedule_delayed_work(&bp->reset_task,
|
|
HZ/10);
|
|
return;
|
|
|
|
} else { /* A leader has completed
|
|
* the "process kill". It's an exit
|
|
* point for a non-leader.
|
|
*/
|
|
bnx2x_nic_load(bp, LOAD_NORMAL);
|
|
bp->recovery_state =
|
|
BNX2X_RECOVERY_DONE;
|
|
smp_wmb();
|
|
return;
|
|
}
|
|
}
|
|
default:
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* bnx2x_nic_unload() flushes the bnx2x_wq, thus reset task is
|
|
* scheduled on a general queue in order to prevent a dead lock.
|
|
*/
|
|
static void bnx2x_reset_task(struct work_struct *work)
|
|
{
|
|
struct bnx2x *bp = container_of(work, struct bnx2x, reset_task.work);
|
|
|
|
#ifdef BNX2X_STOP_ON_ERROR
|
|
BNX2X_ERR("reset task called but STOP_ON_ERROR defined"
|
|
" so reset not done to allow debug dump,\n"
|
|
KERN_ERR " you will need to reboot when done\n");
|
|
return;
|
|
#endif
|
|
|
|
rtnl_lock();
|
|
|
|
if (!netif_running(bp->dev))
|
|
goto reset_task_exit;
|
|
|
|
if (unlikely(bp->recovery_state != BNX2X_RECOVERY_DONE))
|
|
bnx2x_parity_recover(bp);
|
|
else {
|
|
bnx2x_nic_unload(bp, UNLOAD_NORMAL);
|
|
bnx2x_nic_load(bp, LOAD_NORMAL);
|
|
}
|
|
|
|
reset_task_exit:
|
|
rtnl_unlock();
|
|
}
|
|
|
|
/* end of nic load/unload */
|
|
|
|
/*
|
|
* Init service functions
|
|
*/
|
|
|
|
static inline u32 bnx2x_get_pretend_reg(struct bnx2x *bp, int func)
|
|
{
|
|
switch (func) {
|
|
case 0: return PXP2_REG_PGL_PRETEND_FUNC_F0;
|
|
case 1: return PXP2_REG_PGL_PRETEND_FUNC_F1;
|
|
case 2: return PXP2_REG_PGL_PRETEND_FUNC_F2;
|
|
case 3: return PXP2_REG_PGL_PRETEND_FUNC_F3;
|
|
case 4: return PXP2_REG_PGL_PRETEND_FUNC_F4;
|
|
case 5: return PXP2_REG_PGL_PRETEND_FUNC_F5;
|
|
case 6: return PXP2_REG_PGL_PRETEND_FUNC_F6;
|
|
case 7: return PXP2_REG_PGL_PRETEND_FUNC_F7;
|
|
default:
|
|
BNX2X_ERR("Unsupported function index: %d\n", func);
|
|
return (u32)(-1);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_undi_int_disable_e1h(struct bnx2x *bp, int orig_func)
|
|
{
|
|
u32 reg = bnx2x_get_pretend_reg(bp, orig_func), new_val;
|
|
|
|
/* Flush all outstanding writes */
|
|
mmiowb();
|
|
|
|
/* Pretend to be function 0 */
|
|
REG_WR(bp, reg, 0);
|
|
/* Flush the GRC transaction (in the chip) */
|
|
new_val = REG_RD(bp, reg);
|
|
if (new_val != 0) {
|
|
BNX2X_ERR("Hmmm... Pretend register wasn't updated: (0,%d)!\n",
|
|
new_val);
|
|
BUG();
|
|
}
|
|
|
|
/* From now we are in the "like-E1" mode */
|
|
bnx2x_int_disable(bp);
|
|
|
|
/* Flush all outstanding writes */
|
|
mmiowb();
|
|
|
|
/* Restore the original funtion settings */
|
|
REG_WR(bp, reg, orig_func);
|
|
new_val = REG_RD(bp, reg);
|
|
if (new_val != orig_func) {
|
|
BNX2X_ERR("Hmmm... Pretend register wasn't updated: (%d,%d)!\n",
|
|
orig_func, new_val);
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
static inline void bnx2x_undi_int_disable(struct bnx2x *bp, int func)
|
|
{
|
|
if (CHIP_IS_E1H(bp))
|
|
bnx2x_undi_int_disable_e1h(bp, func);
|
|
else
|
|
bnx2x_int_disable(bp);
|
|
}
|
|
|
|
static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
|
|
{
|
|
u32 val;
|
|
|
|
/* Check if there is any driver already loaded */
|
|
val = REG_RD(bp, MISC_REG_UNPREPARED);
|
|
if (val == 0x1) {
|
|
/* Check if it is the UNDI driver
|
|
* UNDI driver initializes CID offset for normal bell to 0x7
|
|
*/
|
|
bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
|
|
val = REG_RD(bp, DORQ_REG_NORM_CID_OFST);
|
|
if (val == 0x7) {
|
|
u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
|
|
/* save our func */
|
|
int func = BP_FUNC(bp);
|
|
u32 swap_en;
|
|
u32 swap_val;
|
|
|
|
/* clear the UNDI indication */
|
|
REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
|
|
|
|
BNX2X_DEV_INFO("UNDI is active! reset device\n");
|
|
|
|
/* try unload UNDI on port 0 */
|
|
bp->func = 0;
|
|
bp->fw_seq =
|
|
(SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
|
|
DRV_MSG_SEQ_NUMBER_MASK);
|
|
reset_code = bnx2x_fw_command(bp, reset_code);
|
|
|
|
/* if UNDI is loaded on the other port */
|
|
if (reset_code != FW_MSG_CODE_DRV_UNLOAD_COMMON) {
|
|
|
|
/* send "DONE" for previous unload */
|
|
bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
|
|
|
|
/* unload UNDI on port 1 */
|
|
bp->func = 1;
|
|
bp->fw_seq =
|
|
(SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
|
|
DRV_MSG_SEQ_NUMBER_MASK);
|
|
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
|
|
|
|
bnx2x_fw_command(bp, reset_code);
|
|
}
|
|
|
|
/* now it's safe to release the lock */
|
|
bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
|
|
|
|
bnx2x_undi_int_disable(bp, func);
|
|
|
|
/* close input traffic and wait for it */
|
|
/* Do not rcv packets to BRB */
|
|
REG_WR(bp,
|
|
(BP_PORT(bp) ? NIG_REG_LLH1_BRB1_DRV_MASK :
|
|
NIG_REG_LLH0_BRB1_DRV_MASK), 0x0);
|
|
/* Do not direct rcv packets that are not for MCP to
|
|
* the BRB */
|
|
REG_WR(bp,
|
|
(BP_PORT(bp) ? NIG_REG_LLH1_BRB1_NOT_MCP :
|
|
NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);
|
|
/* clear AEU */
|
|
REG_WR(bp,
|
|
(BP_PORT(bp) ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
|
|
MISC_REG_AEU_MASK_ATTN_FUNC_0), 0);
|
|
msleep(10);
|
|
|
|
/* save NIG port swap info */
|
|
swap_val = REG_RD(bp, NIG_REG_PORT_SWAP);
|
|
swap_en = REG_RD(bp, NIG_REG_STRAP_OVERRIDE);
|
|
/* reset device */
|
|
REG_WR(bp,
|
|
GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
|
|
0xd3ffffff);
|
|
REG_WR(bp,
|
|
GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
|
|
0x1403);
|
|
/* take the NIG out of reset and restore swap values */
|
|
REG_WR(bp,
|
|
GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
|
|
MISC_REGISTERS_RESET_REG_1_RST_NIG);
|
|
REG_WR(bp, NIG_REG_PORT_SWAP, swap_val);
|
|
REG_WR(bp, NIG_REG_STRAP_OVERRIDE, swap_en);
|
|
|
|
/* send unload done to the MCP */
|
|
bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
|
|
|
|
/* restore our func and fw_seq */
|
|
bp->func = func;
|
|
bp->fw_seq =
|
|
(SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
|
|
DRV_MSG_SEQ_NUMBER_MASK);
|
|
|
|
} else
|
|
bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
|
|
}
|
|
}
|
|
|
|
static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
|
|
{
|
|
u32 val, val2, val3, val4, id;
|
|
u16 pmc;
|
|
|
|
/* Get the chip revision id and number. */
|
|
/* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
|
|
val = REG_RD(bp, MISC_REG_CHIP_NUM);
|
|
id = ((val & 0xffff) << 16);
|
|
val = REG_RD(bp, MISC_REG_CHIP_REV);
|
|
id |= ((val & 0xf) << 12);
|
|
val = REG_RD(bp, MISC_REG_CHIP_METAL);
|
|
id |= ((val & 0xff) << 4);
|
|
val = REG_RD(bp, MISC_REG_BOND_ID);
|
|
id |= (val & 0xf);
|
|
bp->common.chip_id = id;
|
|
bp->link_params.chip_id = bp->common.chip_id;
|
|
BNX2X_DEV_INFO("chip ID is 0x%x\n", id);
|
|
|
|
val = (REG_RD(bp, 0x2874) & 0x55);
|
|
if ((bp->common.chip_id & 0x1) ||
|
|
(CHIP_IS_E1(bp) && val) || (CHIP_IS_E1H(bp) && (val == 0x55))) {
|
|
bp->flags |= ONE_PORT_FLAG;
|
|
BNX2X_DEV_INFO("single port device\n");
|
|
}
|
|
|
|
val = REG_RD(bp, MCP_REG_MCPR_NVM_CFG4);
|
|
bp->common.flash_size = (NVRAM_1MB_SIZE <<
|
|
(val & MCPR_NVM_CFG4_FLASH_SIZE));
|
|
BNX2X_DEV_INFO("flash_size 0x%x (%d)\n",
|
|
bp->common.flash_size, bp->common.flash_size);
|
|
|
|
bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
|
|
bp->common.shmem2_base = REG_RD(bp, MISC_REG_GENERIC_CR_0);
|
|
bp->link_params.shmem_base = bp->common.shmem_base;
|
|
BNX2X_DEV_INFO("shmem offset 0x%x shmem2 offset 0x%x\n",
|
|
bp->common.shmem_base, bp->common.shmem2_base);
|
|
|
|
if (!bp->common.shmem_base ||
|
|
(bp->common.shmem_base < 0xA0000) ||
|
|
(bp->common.shmem_base >= 0xC0000)) {
|
|
BNX2X_DEV_INFO("MCP not active\n");
|
|
bp->flags |= NO_MCP_FLAG;
|
|
return;
|
|
}
|
|
|
|
val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]);
|
|
if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
|
|
!= (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
|
|
BNX2X_ERROR("BAD MCP validity signature\n");
|
|
|
|
bp->common.hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config);
|
|
BNX2X_DEV_INFO("hw_config 0x%08x\n", bp->common.hw_config);
|
|
|
|
bp->link_params.hw_led_mode = ((bp->common.hw_config &
|
|
SHARED_HW_CFG_LED_MODE_MASK) >>
|
|
SHARED_HW_CFG_LED_MODE_SHIFT);
|
|
|
|
bp->link_params.feature_config_flags = 0;
|
|
val = SHMEM_RD(bp, dev_info.shared_feature_config.config);
|
|
if (val & SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED)
|
|
bp->link_params.feature_config_flags |=
|
|
FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
|
|
else
|
|
bp->link_params.feature_config_flags &=
|
|
~FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
|
|
|
|
val = SHMEM_RD(bp, dev_info.bc_rev) >> 8;
|
|
bp->common.bc_ver = val;
|
|
BNX2X_DEV_INFO("bc_ver %X\n", val);
|
|
if (val < BNX2X_BC_VER) {
|
|
/* for now only warn
|
|
* later we might need to enforce this */
|
|
BNX2X_ERROR("This driver needs bc_ver %X but found %X, "
|
|
"please upgrade BC\n", BNX2X_BC_VER, val);
|
|
}
|
|
bp->link_params.feature_config_flags |=
|
|
(val >= REQ_BC_VER_4_VRFY_OPT_MDL) ?
|
|
FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY : 0;
|
|
|
|
if (BP_E1HVN(bp) == 0) {
|
|
pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_PMC, &pmc);
|
|
bp->flags |= (pmc & PCI_PM_CAP_PME_D3cold) ? 0 : NO_WOL_FLAG;
|
|
} else {
|
|
/* no WOL capability for E1HVN != 0 */
|
|
bp->flags |= NO_WOL_FLAG;
|
|
}
|
|
BNX2X_DEV_INFO("%sWoL capable\n",
|
|
(bp->flags & NO_WOL_FLAG) ? "not " : "");
|
|
|
|
val = SHMEM_RD(bp, dev_info.shared_hw_config.part_num);
|
|
val2 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[4]);
|
|
val3 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[8]);
|
|
val4 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[12]);
|
|
|
|
dev_info(&bp->pdev->dev, "part number %X-%X-%X-%X\n",
|
|
val, val2, val3, val4);
|
|
}
|
|
|
|
static void __devinit bnx2x_link_settings_supported(struct bnx2x *bp,
|
|
u32 switch_cfg)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
u32 ext_phy_type;
|
|
|
|
switch (switch_cfg) {
|
|
case SWITCH_CFG_1G:
|
|
BNX2X_DEV_INFO("switch_cfg 0x%x (1G)\n", switch_cfg);
|
|
|
|
ext_phy_type =
|
|
SERDES_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
|
|
switch (ext_phy_type) {
|
|
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
|
|
BNX2X_DEV_INFO("ext_phy_type 0x%x (Direct)\n",
|
|
ext_phy_type);
|
|
|
|
bp->port.supported |= (SUPPORTED_10baseT_Half |
|
|
SUPPORTED_10baseT_Full |
|
|
SUPPORTED_100baseT_Half |
|
|
SUPPORTED_100baseT_Full |
|
|
SUPPORTED_1000baseT_Full |
|
|
SUPPORTED_2500baseX_Full |
|
|
SUPPORTED_TP |
|
|
SUPPORTED_FIBRE |
|
|
SUPPORTED_Autoneg |
|
|
SUPPORTED_Pause |
|
|
SUPPORTED_Asym_Pause);
|
|
break;
|
|
|
|
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
|
|
BNX2X_DEV_INFO("ext_phy_type 0x%x (5482)\n",
|
|
ext_phy_type);
|
|
|
|
bp->port.supported |= (SUPPORTED_10baseT_Half |
|
|
SUPPORTED_10baseT_Full |
|
|
SUPPORTED_100baseT_Half |
|
|
SUPPORTED_100baseT_Full |
|
|
SUPPORTED_1000baseT_Full |
|
|
SUPPORTED_TP |
|
|
SUPPORTED_FIBRE |
|
|
SUPPORTED_Autoneg |
|
|
SUPPORTED_Pause |
|
|
SUPPORTED_Asym_Pause);
|
|
break;
|
|
|
|
default:
|
|
BNX2X_ERR("NVRAM config error. "
|
|
"BAD SerDes ext_phy_config 0x%x\n",
|
|
bp->link_params.ext_phy_config);
|
|
return;
|
|
}
|
|
|
|
bp->port.phy_addr = REG_RD(bp, NIG_REG_SERDES0_CTRL_PHY_ADDR +
|
|
port*0x10);
|
|
BNX2X_DEV_INFO("phy_addr 0x%x\n", bp->port.phy_addr);
|
|
break;
|
|
|
|
case SWITCH_CFG_10G:
|
|
BNX2X_DEV_INFO("switch_cfg 0x%x (10G)\n", switch_cfg);
|
|
|
|
ext_phy_type =
|
|
XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
|
|
switch (ext_phy_type) {
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
|
|
BNX2X_DEV_INFO("ext_phy_type 0x%x (Direct)\n",
|
|
ext_phy_type);
|
|
|
|
bp->port.supported |= (SUPPORTED_10baseT_Half |
|
|
SUPPORTED_10baseT_Full |
|
|
SUPPORTED_100baseT_Half |
|
|
SUPPORTED_100baseT_Full |
|
|
SUPPORTED_1000baseT_Full |
|
|
SUPPORTED_2500baseX_Full |
|
|
SUPPORTED_10000baseT_Full |
|
|
SUPPORTED_TP |
|
|
SUPPORTED_FIBRE |
|
|
SUPPORTED_Autoneg |
|
|
SUPPORTED_Pause |
|
|
SUPPORTED_Asym_Pause);
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
|
|
BNX2X_DEV_INFO("ext_phy_type 0x%x (8072)\n",
|
|
ext_phy_type);
|
|
|
|
bp->port.supported |= (SUPPORTED_10000baseT_Full |
|
|
SUPPORTED_1000baseT_Full |
|
|
SUPPORTED_FIBRE |
|
|
SUPPORTED_Autoneg |
|
|
SUPPORTED_Pause |
|
|
SUPPORTED_Asym_Pause);
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
|
|
BNX2X_DEV_INFO("ext_phy_type 0x%x (8073)\n",
|
|
ext_phy_type);
|
|
|
|
bp->port.supported |= (SUPPORTED_10000baseT_Full |
|
|
SUPPORTED_2500baseX_Full |
|
|
SUPPORTED_1000baseT_Full |
|
|
SUPPORTED_FIBRE |
|
|
SUPPORTED_Autoneg |
|
|
SUPPORTED_Pause |
|
|
SUPPORTED_Asym_Pause);
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
|
|
BNX2X_DEV_INFO("ext_phy_type 0x%x (8705)\n",
|
|
ext_phy_type);
|
|
|
|
bp->port.supported |= (SUPPORTED_10000baseT_Full |
|
|
SUPPORTED_FIBRE |
|
|
SUPPORTED_Pause |
|
|
SUPPORTED_Asym_Pause);
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
|
|
BNX2X_DEV_INFO("ext_phy_type 0x%x (8706)\n",
|
|
ext_phy_type);
|
|
|
|
bp->port.supported |= (SUPPORTED_10000baseT_Full |
|
|
SUPPORTED_1000baseT_Full |
|
|
SUPPORTED_FIBRE |
|
|
SUPPORTED_Pause |
|
|
SUPPORTED_Asym_Pause);
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
|
|
BNX2X_DEV_INFO("ext_phy_type 0x%x (8726)\n",
|
|
ext_phy_type);
|
|
|
|
bp->port.supported |= (SUPPORTED_10000baseT_Full |
|
|
SUPPORTED_1000baseT_Full |
|
|
SUPPORTED_Autoneg |
|
|
SUPPORTED_FIBRE |
|
|
SUPPORTED_Pause |
|
|
SUPPORTED_Asym_Pause);
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
|
|
BNX2X_DEV_INFO("ext_phy_type 0x%x (8727)\n",
|
|
ext_phy_type);
|
|
|
|
bp->port.supported |= (SUPPORTED_10000baseT_Full |
|
|
SUPPORTED_1000baseT_Full |
|
|
SUPPORTED_Autoneg |
|
|
SUPPORTED_FIBRE |
|
|
SUPPORTED_Pause |
|
|
SUPPORTED_Asym_Pause);
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
|
|
BNX2X_DEV_INFO("ext_phy_type 0x%x (SFX7101)\n",
|
|
ext_phy_type);
|
|
|
|
bp->port.supported |= (SUPPORTED_10000baseT_Full |
|
|
SUPPORTED_TP |
|
|
SUPPORTED_Autoneg |
|
|
SUPPORTED_Pause |
|
|
SUPPORTED_Asym_Pause);
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
|
|
BNX2X_DEV_INFO("ext_phy_type 0x%x (BCM8481)\n",
|
|
ext_phy_type);
|
|
|
|
bp->port.supported |= (SUPPORTED_10baseT_Half |
|
|
SUPPORTED_10baseT_Full |
|
|
SUPPORTED_100baseT_Half |
|
|
SUPPORTED_100baseT_Full |
|
|
SUPPORTED_1000baseT_Full |
|
|
SUPPORTED_10000baseT_Full |
|
|
SUPPORTED_TP |
|
|
SUPPORTED_Autoneg |
|
|
SUPPORTED_Pause |
|
|
SUPPORTED_Asym_Pause);
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
|
|
BNX2X_ERR("XGXS PHY Failure detected 0x%x\n",
|
|
bp->link_params.ext_phy_config);
|
|
break;
|
|
|
|
default:
|
|
BNX2X_ERR("NVRAM config error. "
|
|
"BAD XGXS ext_phy_config 0x%x\n",
|
|
bp->link_params.ext_phy_config);
|
|
return;
|
|
}
|
|
|
|
bp->port.phy_addr = REG_RD(bp, NIG_REG_XGXS0_CTRL_PHY_ADDR +
|
|
port*0x18);
|
|
BNX2X_DEV_INFO("phy_addr 0x%x\n", bp->port.phy_addr);
|
|
|
|
break;
|
|
|
|
default:
|
|
BNX2X_ERR("BAD switch_cfg link_config 0x%x\n",
|
|
bp->port.link_config);
|
|
return;
|
|
}
|
|
bp->link_params.phy_addr = bp->port.phy_addr;
|
|
|
|
/* mask what we support according to speed_cap_mask */
|
|
if (!(bp->link_params.speed_cap_mask &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF))
|
|
bp->port.supported &= ~SUPPORTED_10baseT_Half;
|
|
|
|
if (!(bp->link_params.speed_cap_mask &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL))
|
|
bp->port.supported &= ~SUPPORTED_10baseT_Full;
|
|
|
|
if (!(bp->link_params.speed_cap_mask &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF))
|
|
bp->port.supported &= ~SUPPORTED_100baseT_Half;
|
|
|
|
if (!(bp->link_params.speed_cap_mask &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL))
|
|
bp->port.supported &= ~SUPPORTED_100baseT_Full;
|
|
|
|
if (!(bp->link_params.speed_cap_mask &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_1G))
|
|
bp->port.supported &= ~(SUPPORTED_1000baseT_Half |
|
|
SUPPORTED_1000baseT_Full);
|
|
|
|
if (!(bp->link_params.speed_cap_mask &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
|
|
bp->port.supported &= ~SUPPORTED_2500baseX_Full;
|
|
|
|
if (!(bp->link_params.speed_cap_mask &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G))
|
|
bp->port.supported &= ~SUPPORTED_10000baseT_Full;
|
|
|
|
BNX2X_DEV_INFO("supported 0x%x\n", bp->port.supported);
|
|
}
|
|
|
|
static void __devinit bnx2x_link_settings_requested(struct bnx2x *bp)
|
|
{
|
|
bp->link_params.req_duplex = DUPLEX_FULL;
|
|
|
|
switch (bp->port.link_config & PORT_FEATURE_LINK_SPEED_MASK) {
|
|
case PORT_FEATURE_LINK_SPEED_AUTO:
|
|
if (bp->port.supported & SUPPORTED_Autoneg) {
|
|
bp->link_params.req_line_speed = SPEED_AUTO_NEG;
|
|
bp->port.advertising = bp->port.supported;
|
|
} else {
|
|
u32 ext_phy_type =
|
|
XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
|
|
|
|
if ((ext_phy_type ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
|
|
(ext_phy_type ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706)) {
|
|
/* force 10G, no AN */
|
|
bp->link_params.req_line_speed = SPEED_10000;
|
|
bp->port.advertising =
|
|
(ADVERTISED_10000baseT_Full |
|
|
ADVERTISED_FIBRE);
|
|
break;
|
|
}
|
|
BNX2X_ERR("NVRAM config error. "
|
|
"Invalid link_config 0x%x"
|
|
" Autoneg not supported\n",
|
|
bp->port.link_config);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_10M_FULL:
|
|
if (bp->port.supported & SUPPORTED_10baseT_Full) {
|
|
bp->link_params.req_line_speed = SPEED_10;
|
|
bp->port.advertising = (ADVERTISED_10baseT_Full |
|
|
ADVERTISED_TP);
|
|
} else {
|
|
BNX2X_ERROR("NVRAM config error. "
|
|
"Invalid link_config 0x%x"
|
|
" speed_cap_mask 0x%x\n",
|
|
bp->port.link_config,
|
|
bp->link_params.speed_cap_mask);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_10M_HALF:
|
|
if (bp->port.supported & SUPPORTED_10baseT_Half) {
|
|
bp->link_params.req_line_speed = SPEED_10;
|
|
bp->link_params.req_duplex = DUPLEX_HALF;
|
|
bp->port.advertising = (ADVERTISED_10baseT_Half |
|
|
ADVERTISED_TP);
|
|
} else {
|
|
BNX2X_ERROR("NVRAM config error. "
|
|
"Invalid link_config 0x%x"
|
|
" speed_cap_mask 0x%x\n",
|
|
bp->port.link_config,
|
|
bp->link_params.speed_cap_mask);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_100M_FULL:
|
|
if (bp->port.supported & SUPPORTED_100baseT_Full) {
|
|
bp->link_params.req_line_speed = SPEED_100;
|
|
bp->port.advertising = (ADVERTISED_100baseT_Full |
|
|
ADVERTISED_TP);
|
|
} else {
|
|
BNX2X_ERROR("NVRAM config error. "
|
|
"Invalid link_config 0x%x"
|
|
" speed_cap_mask 0x%x\n",
|
|
bp->port.link_config,
|
|
bp->link_params.speed_cap_mask);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_100M_HALF:
|
|
if (bp->port.supported & SUPPORTED_100baseT_Half) {
|
|
bp->link_params.req_line_speed = SPEED_100;
|
|
bp->link_params.req_duplex = DUPLEX_HALF;
|
|
bp->port.advertising = (ADVERTISED_100baseT_Half |
|
|
ADVERTISED_TP);
|
|
} else {
|
|
BNX2X_ERROR("NVRAM config error. "
|
|
"Invalid link_config 0x%x"
|
|
" speed_cap_mask 0x%x\n",
|
|
bp->port.link_config,
|
|
bp->link_params.speed_cap_mask);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_1G:
|
|
if (bp->port.supported & SUPPORTED_1000baseT_Full) {
|
|
bp->link_params.req_line_speed = SPEED_1000;
|
|
bp->port.advertising = (ADVERTISED_1000baseT_Full |
|
|
ADVERTISED_TP);
|
|
} else {
|
|
BNX2X_ERROR("NVRAM config error. "
|
|
"Invalid link_config 0x%x"
|
|
" speed_cap_mask 0x%x\n",
|
|
bp->port.link_config,
|
|
bp->link_params.speed_cap_mask);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_2_5G:
|
|
if (bp->port.supported & SUPPORTED_2500baseX_Full) {
|
|
bp->link_params.req_line_speed = SPEED_2500;
|
|
bp->port.advertising = (ADVERTISED_2500baseX_Full |
|
|
ADVERTISED_TP);
|
|
} else {
|
|
BNX2X_ERROR("NVRAM config error. "
|
|
"Invalid link_config 0x%x"
|
|
" speed_cap_mask 0x%x\n",
|
|
bp->port.link_config,
|
|
bp->link_params.speed_cap_mask);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_10G_CX4:
|
|
case PORT_FEATURE_LINK_SPEED_10G_KX4:
|
|
case PORT_FEATURE_LINK_SPEED_10G_KR:
|
|
if (bp->port.supported & SUPPORTED_10000baseT_Full) {
|
|
bp->link_params.req_line_speed = SPEED_10000;
|
|
bp->port.advertising = (ADVERTISED_10000baseT_Full |
|
|
ADVERTISED_FIBRE);
|
|
} else {
|
|
BNX2X_ERROR("NVRAM config error. "
|
|
"Invalid link_config 0x%x"
|
|
" speed_cap_mask 0x%x\n",
|
|
bp->port.link_config,
|
|
bp->link_params.speed_cap_mask);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
BNX2X_ERROR("NVRAM config error. "
|
|
"BAD link speed link_config 0x%x\n",
|
|
bp->port.link_config);
|
|
bp->link_params.req_line_speed = SPEED_AUTO_NEG;
|
|
bp->port.advertising = bp->port.supported;
|
|
break;
|
|
}
|
|
|
|
bp->link_params.req_flow_ctrl = (bp->port.link_config &
|
|
PORT_FEATURE_FLOW_CONTROL_MASK);
|
|
if ((bp->link_params.req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) &&
|
|
!(bp->port.supported & SUPPORTED_Autoneg))
|
|
bp->link_params.req_flow_ctrl = BNX2X_FLOW_CTRL_NONE;
|
|
|
|
BNX2X_DEV_INFO("req_line_speed %d req_duplex %d req_flow_ctrl 0x%x"
|
|
" advertising 0x%x\n",
|
|
bp->link_params.req_line_speed,
|
|
bp->link_params.req_duplex,
|
|
bp->link_params.req_flow_ctrl, bp->port.advertising);
|
|
}
|
|
|
|
static void __devinit bnx2x_set_mac_buf(u8 *mac_buf, u32 mac_lo, u16 mac_hi)
|
|
{
|
|
mac_hi = cpu_to_be16(mac_hi);
|
|
mac_lo = cpu_to_be32(mac_lo);
|
|
memcpy(mac_buf, &mac_hi, sizeof(mac_hi));
|
|
memcpy(mac_buf + sizeof(mac_hi), &mac_lo, sizeof(mac_lo));
|
|
}
|
|
|
|
static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
u32 val, val2;
|
|
u32 config;
|
|
u16 i;
|
|
u32 ext_phy_type;
|
|
|
|
bp->link_params.bp = bp;
|
|
bp->link_params.port = port;
|
|
|
|
bp->link_params.lane_config =
|
|
SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config);
|
|
bp->link_params.ext_phy_config =
|
|
SHMEM_RD(bp,
|
|
dev_info.port_hw_config[port].external_phy_config);
|
|
/* BCM8727_NOC => BCM8727 no over current */
|
|
if (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config) ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC) {
|
|
bp->link_params.ext_phy_config &=
|
|
~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
|
|
bp->link_params.ext_phy_config |=
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727;
|
|
bp->link_params.feature_config_flags |=
|
|
FEATURE_CONFIG_BCM8727_NOC;
|
|
}
|
|
|
|
bp->link_params.speed_cap_mask =
|
|
SHMEM_RD(bp,
|
|
dev_info.port_hw_config[port].speed_capability_mask);
|
|
|
|
bp->port.link_config =
|
|
SHMEM_RD(bp, dev_info.port_feature_config[port].link_config);
|
|
|
|
/* Get the 4 lanes xgxs config rx and tx */
|
|
for (i = 0; i < 2; i++) {
|
|
val = SHMEM_RD(bp,
|
|
dev_info.port_hw_config[port].xgxs_config_rx[i<<1]);
|
|
bp->link_params.xgxs_config_rx[i << 1] = ((val>>16) & 0xffff);
|
|
bp->link_params.xgxs_config_rx[(i << 1) + 1] = (val & 0xffff);
|
|
|
|
val = SHMEM_RD(bp,
|
|
dev_info.port_hw_config[port].xgxs_config_tx[i<<1]);
|
|
bp->link_params.xgxs_config_tx[i << 1] = ((val>>16) & 0xffff);
|
|
bp->link_params.xgxs_config_tx[(i << 1) + 1] = (val & 0xffff);
|
|
}
|
|
|
|
/* If the device is capable of WoL, set the default state according
|
|
* to the HW
|
|
*/
|
|
config = SHMEM_RD(bp, dev_info.port_feature_config[port].config);
|
|
bp->wol = (!(bp->flags & NO_WOL_FLAG) &&
|
|
(config & PORT_FEATURE_WOL_ENABLED));
|
|
|
|
BNX2X_DEV_INFO("lane_config 0x%08x ext_phy_config 0x%08x"
|
|
" speed_cap_mask 0x%08x link_config 0x%08x\n",
|
|
bp->link_params.lane_config,
|
|
bp->link_params.ext_phy_config,
|
|
bp->link_params.speed_cap_mask, bp->port.link_config);
|
|
|
|
bp->link_params.switch_cfg |= (bp->port.link_config &
|
|
PORT_FEATURE_CONNECTED_SWITCH_MASK);
|
|
bnx2x_link_settings_supported(bp, bp->link_params.switch_cfg);
|
|
|
|
bnx2x_link_settings_requested(bp);
|
|
|
|
/*
|
|
* If connected directly, work with the internal PHY, otherwise, work
|
|
* with the external PHY
|
|
*/
|
|
ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
|
|
if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)
|
|
bp->mdio.prtad = bp->link_params.phy_addr;
|
|
|
|
else if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
|
|
(ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN))
|
|
bp->mdio.prtad =
|
|
XGXS_EXT_PHY_ADDR(bp->link_params.ext_phy_config);
|
|
|
|
val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper);
|
|
val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower);
|
|
bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2);
|
|
memcpy(bp->link_params.mac_addr, bp->dev->dev_addr, ETH_ALEN);
|
|
memcpy(bp->dev->perm_addr, bp->dev->dev_addr, ETH_ALEN);
|
|
|
|
#ifdef BCM_CNIC
|
|
val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].iscsi_mac_upper);
|
|
val = SHMEM_RD(bp, dev_info.port_hw_config[port].iscsi_mac_lower);
|
|
bnx2x_set_mac_buf(bp->iscsi_mac, val, val2);
|
|
#endif
|
|
}
|
|
|
|
static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
|
|
{
|
|
int func = BP_FUNC(bp);
|
|
u32 val, val2;
|
|
int rc = 0;
|
|
|
|
bnx2x_get_common_hwinfo(bp);
|
|
|
|
bp->e1hov = 0;
|
|
bp->e1hmf = 0;
|
|
if (CHIP_IS_E1H(bp) && !BP_NOMCP(bp)) {
|
|
bp->mf_config =
|
|
SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
|
|
|
|
val = (SHMEM_RD(bp, mf_cfg.func_mf_config[FUNC_0].e1hov_tag) &
|
|
FUNC_MF_CFG_E1HOV_TAG_MASK);
|
|
if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT)
|
|
bp->e1hmf = 1;
|
|
BNX2X_DEV_INFO("%s function mode\n",
|
|
IS_E1HMF(bp) ? "multi" : "single");
|
|
|
|
if (IS_E1HMF(bp)) {
|
|
val = (SHMEM_RD(bp, mf_cfg.func_mf_config[func].
|
|
e1hov_tag) &
|
|
FUNC_MF_CFG_E1HOV_TAG_MASK);
|
|
if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
|
|
bp->e1hov = val;
|
|
BNX2X_DEV_INFO("E1HOV for func %d is %d "
|
|
"(0x%04x)\n",
|
|
func, bp->e1hov, bp->e1hov);
|
|
} else {
|
|
BNX2X_ERROR("No valid E1HOV for func %d,"
|
|
" aborting\n", func);
|
|
rc = -EPERM;
|
|
}
|
|
} else {
|
|
if (BP_E1HVN(bp)) {
|
|
BNX2X_ERROR("VN %d in single function mode,"
|
|
" aborting\n", BP_E1HVN(bp));
|
|
rc = -EPERM;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!BP_NOMCP(bp)) {
|
|
bnx2x_get_port_hwinfo(bp);
|
|
|
|
bp->fw_seq = (SHMEM_RD(bp, func_mb[func].drv_mb_header) &
|
|
DRV_MSG_SEQ_NUMBER_MASK);
|
|
BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
|
|
}
|
|
|
|
if (IS_E1HMF(bp)) {
|
|
val2 = SHMEM_RD(bp, mf_cfg.func_mf_config[func].mac_upper);
|
|
val = SHMEM_RD(bp, mf_cfg.func_mf_config[func].mac_lower);
|
|
if ((val2 != FUNC_MF_CFG_UPPERMAC_DEFAULT) &&
|
|
(val != FUNC_MF_CFG_LOWERMAC_DEFAULT)) {
|
|
bp->dev->dev_addr[0] = (u8)(val2 >> 8 & 0xff);
|
|
bp->dev->dev_addr[1] = (u8)(val2 & 0xff);
|
|
bp->dev->dev_addr[2] = (u8)(val >> 24 & 0xff);
|
|
bp->dev->dev_addr[3] = (u8)(val >> 16 & 0xff);
|
|
bp->dev->dev_addr[4] = (u8)(val >> 8 & 0xff);
|
|
bp->dev->dev_addr[5] = (u8)(val & 0xff);
|
|
memcpy(bp->link_params.mac_addr, bp->dev->dev_addr,
|
|
ETH_ALEN);
|
|
memcpy(bp->dev->perm_addr, bp->dev->dev_addr,
|
|
ETH_ALEN);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
if (BP_NOMCP(bp)) {
|
|
/* only supposed to happen on emulation/FPGA */
|
|
BNX2X_ERROR("warning: random MAC workaround active\n");
|
|
random_ether_addr(bp->dev->dev_addr);
|
|
memcpy(bp->dev->perm_addr, bp->dev->dev_addr, ETH_ALEN);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void __devinit bnx2x_read_fwinfo(struct bnx2x *bp)
|
|
{
|
|
int cnt, i, block_end, rodi;
|
|
char vpd_data[BNX2X_VPD_LEN+1];
|
|
char str_id_reg[VENDOR_ID_LEN+1];
|
|
char str_id_cap[VENDOR_ID_LEN+1];
|
|
u8 len;
|
|
|
|
cnt = pci_read_vpd(bp->pdev, 0, BNX2X_VPD_LEN, vpd_data);
|
|
memset(bp->fw_ver, 0, sizeof(bp->fw_ver));
|
|
|
|
if (cnt < BNX2X_VPD_LEN)
|
|
goto out_not_found;
|
|
|
|
i = pci_vpd_find_tag(vpd_data, 0, BNX2X_VPD_LEN,
|
|
PCI_VPD_LRDT_RO_DATA);
|
|
if (i < 0)
|
|
goto out_not_found;
|
|
|
|
|
|
block_end = i + PCI_VPD_LRDT_TAG_SIZE +
|
|
pci_vpd_lrdt_size(&vpd_data[i]);
|
|
|
|
i += PCI_VPD_LRDT_TAG_SIZE;
|
|
|
|
if (block_end > BNX2X_VPD_LEN)
|
|
goto out_not_found;
|
|
|
|
rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end,
|
|
PCI_VPD_RO_KEYWORD_MFR_ID);
|
|
if (rodi < 0)
|
|
goto out_not_found;
|
|
|
|
len = pci_vpd_info_field_size(&vpd_data[rodi]);
|
|
|
|
if (len != VENDOR_ID_LEN)
|
|
goto out_not_found;
|
|
|
|
rodi += PCI_VPD_INFO_FLD_HDR_SIZE;
|
|
|
|
/* vendor specific info */
|
|
snprintf(str_id_reg, VENDOR_ID_LEN + 1, "%04x", PCI_VENDOR_ID_DELL);
|
|
snprintf(str_id_cap, VENDOR_ID_LEN + 1, "%04X", PCI_VENDOR_ID_DELL);
|
|
if (!strncmp(str_id_reg, &vpd_data[rodi], VENDOR_ID_LEN) ||
|
|
!strncmp(str_id_cap, &vpd_data[rodi], VENDOR_ID_LEN)) {
|
|
|
|
rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end,
|
|
PCI_VPD_RO_KEYWORD_VENDOR0);
|
|
if (rodi >= 0) {
|
|
len = pci_vpd_info_field_size(&vpd_data[rodi]);
|
|
|
|
rodi += PCI_VPD_INFO_FLD_HDR_SIZE;
|
|
|
|
if (len < 32 && (len + rodi) <= BNX2X_VPD_LEN) {
|
|
memcpy(bp->fw_ver, &vpd_data[rodi], len);
|
|
bp->fw_ver[len] = ' ';
|
|
}
|
|
}
|
|
return;
|
|
}
|
|
out_not_found:
|
|
return;
|
|
}
|
|
|
|
static int __devinit bnx2x_init_bp(struct bnx2x *bp)
|
|
{
|
|
int func = BP_FUNC(bp);
|
|
int timer_interval;
|
|
int rc;
|
|
|
|
/* Disable interrupt handling until HW is initialized */
|
|
atomic_set(&bp->intr_sem, 1);
|
|
smp_wmb(); /* Ensure that bp->intr_sem update is SMP-safe */
|
|
|
|
mutex_init(&bp->port.phy_mutex);
|
|
mutex_init(&bp->fw_mb_mutex);
|
|
spin_lock_init(&bp->stats_lock);
|
|
#ifdef BCM_CNIC
|
|
mutex_init(&bp->cnic_mutex);
|
|
#endif
|
|
|
|
INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task);
|
|
INIT_DELAYED_WORK(&bp->reset_task, bnx2x_reset_task);
|
|
|
|
rc = bnx2x_get_hwinfo(bp);
|
|
|
|
bnx2x_read_fwinfo(bp);
|
|
/* need to reset chip if undi was active */
|
|
if (!BP_NOMCP(bp))
|
|
bnx2x_undi_unload(bp);
|
|
|
|
if (CHIP_REV_IS_FPGA(bp))
|
|
dev_err(&bp->pdev->dev, "FPGA detected\n");
|
|
|
|
if (BP_NOMCP(bp) && (func == 0))
|
|
dev_err(&bp->pdev->dev, "MCP disabled, "
|
|
"must load devices in order!\n");
|
|
|
|
/* Set multi queue mode */
|
|
if ((multi_mode != ETH_RSS_MODE_DISABLED) &&
|
|
((int_mode == INT_MODE_INTx) || (int_mode == INT_MODE_MSI))) {
|
|
dev_err(&bp->pdev->dev, "Multi disabled since int_mode "
|
|
"requested is not MSI-X\n");
|
|
multi_mode = ETH_RSS_MODE_DISABLED;
|
|
}
|
|
bp->multi_mode = multi_mode;
|
|
bp->int_mode = int_mode;
|
|
|
|
bp->dev->features |= NETIF_F_GRO;
|
|
|
|
/* Set TPA flags */
|
|
if (disable_tpa) {
|
|
bp->flags &= ~TPA_ENABLE_FLAG;
|
|
bp->dev->features &= ~NETIF_F_LRO;
|
|
} else {
|
|
bp->flags |= TPA_ENABLE_FLAG;
|
|
bp->dev->features |= NETIF_F_LRO;
|
|
}
|
|
bp->disable_tpa = disable_tpa;
|
|
|
|
if (CHIP_IS_E1(bp))
|
|
bp->dropless_fc = 0;
|
|
else
|
|
bp->dropless_fc = dropless_fc;
|
|
|
|
bp->mrrs = mrrs;
|
|
|
|
bp->tx_ring_size = MAX_TX_AVAIL;
|
|
bp->rx_ring_size = MAX_RX_AVAIL;
|
|
|
|
bp->rx_csum = 1;
|
|
|
|
/* make sure that the numbers are in the right granularity */
|
|
bp->tx_ticks = (50 / (4 * BNX2X_BTR)) * (4 * BNX2X_BTR);
|
|
bp->rx_ticks = (25 / (4 * BNX2X_BTR)) * (4 * BNX2X_BTR);
|
|
|
|
timer_interval = (CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ);
|
|
bp->current_interval = (poll ? poll : timer_interval);
|
|
|
|
init_timer(&bp->timer);
|
|
bp->timer.expires = jiffies + bp->current_interval;
|
|
bp->timer.data = (unsigned long) bp;
|
|
bp->timer.function = bnx2x_timer;
|
|
|
|
return rc;
|
|
}
|
|
|
|
|
|
/****************************************************************************
|
|
* General service functions
|
|
****************************************************************************/
|
|
|
|
/* called with rtnl_lock */
|
|
static int bnx2x_open(struct net_device *dev)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
netif_carrier_off(dev);
|
|
|
|
bnx2x_set_power_state(bp, PCI_D0);
|
|
|
|
if (!bnx2x_reset_is_done(bp)) {
|
|
do {
|
|
/* Reset MCP mail box sequence if there is on going
|
|
* recovery
|
|
*/
|
|
bp->fw_seq = 0;
|
|
|
|
/* If it's the first function to load and reset done
|
|
* is still not cleared it may mean that. We don't
|
|
* check the attention state here because it may have
|
|
* already been cleared by a "common" reset but we
|
|
* shell proceed with "process kill" anyway.
|
|
*/
|
|
if ((bnx2x_get_load_cnt(bp) == 0) &&
|
|
bnx2x_trylock_hw_lock(bp,
|
|
HW_LOCK_RESOURCE_RESERVED_08) &&
|
|
(!bnx2x_leader_reset(bp))) {
|
|
DP(NETIF_MSG_HW, "Recovered in open\n");
|
|
break;
|
|
}
|
|
|
|
bnx2x_set_power_state(bp, PCI_D3hot);
|
|
|
|
printk(KERN_ERR"%s: Recovery flow hasn't been properly"
|
|
" completed yet. Try again later. If u still see this"
|
|
" message after a few retries then power cycle is"
|
|
" required.\n", bp->dev->name);
|
|
|
|
return -EAGAIN;
|
|
} while (0);
|
|
}
|
|
|
|
bp->recovery_state = BNX2X_RECOVERY_DONE;
|
|
|
|
return bnx2x_nic_load(bp, LOAD_OPEN);
|
|
}
|
|
|
|
/* called with rtnl_lock */
|
|
static int bnx2x_close(struct net_device *dev)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
/* Unload the driver, release IRQs */
|
|
bnx2x_nic_unload(bp, UNLOAD_CLOSE);
|
|
bnx2x_set_power_state(bp, PCI_D3hot);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* called with netif_tx_lock from dev_mcast.c */
|
|
void bnx2x_set_rx_mode(struct net_device *dev)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
u32 rx_mode = BNX2X_RX_MODE_NORMAL;
|
|
int port = BP_PORT(bp);
|
|
|
|
if (bp->state != BNX2X_STATE_OPEN) {
|
|
DP(NETIF_MSG_IFUP, "state is %x, returning\n", bp->state);
|
|
return;
|
|
}
|
|
|
|
DP(NETIF_MSG_IFUP, "dev->flags = %x\n", dev->flags);
|
|
|
|
if (dev->flags & IFF_PROMISC)
|
|
rx_mode = BNX2X_RX_MODE_PROMISC;
|
|
|
|
else if ((dev->flags & IFF_ALLMULTI) ||
|
|
((netdev_mc_count(dev) > BNX2X_MAX_MULTICAST) &&
|
|
CHIP_IS_E1(bp)))
|
|
rx_mode = BNX2X_RX_MODE_ALLMULTI;
|
|
|
|
else { /* some multicasts */
|
|
if (CHIP_IS_E1(bp)) {
|
|
int i, old, offset;
|
|
struct netdev_hw_addr *ha;
|
|
struct mac_configuration_cmd *config =
|
|
bnx2x_sp(bp, mcast_config);
|
|
|
|
i = 0;
|
|
netdev_for_each_mc_addr(ha, dev) {
|
|
config->config_table[i].
|
|
cam_entry.msb_mac_addr =
|
|
swab16(*(u16 *)&ha->addr[0]);
|
|
config->config_table[i].
|
|
cam_entry.middle_mac_addr =
|
|
swab16(*(u16 *)&ha->addr[2]);
|
|
config->config_table[i].
|
|
cam_entry.lsb_mac_addr =
|
|
swab16(*(u16 *)&ha->addr[4]);
|
|
config->config_table[i].cam_entry.flags =
|
|
cpu_to_le16(port);
|
|
config->config_table[i].
|
|
target_table_entry.flags = 0;
|
|
config->config_table[i].target_table_entry.
|
|
clients_bit_vector =
|
|
cpu_to_le32(1 << BP_L_ID(bp));
|
|
config->config_table[i].
|
|
target_table_entry.vlan_id = 0;
|
|
|
|
DP(NETIF_MSG_IFUP,
|
|
"setting MCAST[%d] (%04x:%04x:%04x)\n", i,
|
|
config->config_table[i].
|
|
cam_entry.msb_mac_addr,
|
|
config->config_table[i].
|
|
cam_entry.middle_mac_addr,
|
|
config->config_table[i].
|
|
cam_entry.lsb_mac_addr);
|
|
i++;
|
|
}
|
|
old = config->hdr.length;
|
|
if (old > i) {
|
|
for (; i < old; i++) {
|
|
if (CAM_IS_INVALID(config->
|
|
config_table[i])) {
|
|
/* already invalidated */
|
|
break;
|
|
}
|
|
/* invalidate */
|
|
CAM_INVALIDATE(config->
|
|
config_table[i]);
|
|
}
|
|
}
|
|
|
|
if (CHIP_REV_IS_SLOW(bp))
|
|
offset = BNX2X_MAX_EMUL_MULTI*(1 + port);
|
|
else
|
|
offset = BNX2X_MAX_MULTICAST*(1 + port);
|
|
|
|
config->hdr.length = i;
|
|
config->hdr.offset = offset;
|
|
config->hdr.client_id = bp->fp->cl_id;
|
|
config->hdr.reserved1 = 0;
|
|
|
|
bp->set_mac_pending++;
|
|
smp_wmb();
|
|
|
|
bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0,
|
|
U64_HI(bnx2x_sp_mapping(bp, mcast_config)),
|
|
U64_LO(bnx2x_sp_mapping(bp, mcast_config)),
|
|
0);
|
|
} else { /* E1H */
|
|
/* Accept one or more multicasts */
|
|
struct netdev_hw_addr *ha;
|
|
u32 mc_filter[MC_HASH_SIZE];
|
|
u32 crc, bit, regidx;
|
|
int i;
|
|
|
|
memset(mc_filter, 0, 4 * MC_HASH_SIZE);
|
|
|
|
netdev_for_each_mc_addr(ha, dev) {
|
|
DP(NETIF_MSG_IFUP, "Adding mcast MAC: %pM\n",
|
|
ha->addr);
|
|
|
|
crc = crc32c_le(0, ha->addr, ETH_ALEN);
|
|
bit = (crc >> 24) & 0xff;
|
|
regidx = bit >> 5;
|
|
bit &= 0x1f;
|
|
mc_filter[regidx] |= (1 << bit);
|
|
}
|
|
|
|
for (i = 0; i < MC_HASH_SIZE; i++)
|
|
REG_WR(bp, MC_HASH_OFFSET(bp, i),
|
|
mc_filter[i]);
|
|
}
|
|
}
|
|
|
|
bp->rx_mode = rx_mode;
|
|
bnx2x_set_storm_rx_mode(bp);
|
|
}
|
|
|
|
|
|
/* called with rtnl_lock */
|
|
static int bnx2x_mdio_read(struct net_device *netdev, int prtad,
|
|
int devad, u16 addr)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(netdev);
|
|
u16 value;
|
|
int rc;
|
|
u32 phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
|
|
|
|
DP(NETIF_MSG_LINK, "mdio_read: prtad 0x%x, devad 0x%x, addr 0x%x\n",
|
|
prtad, devad, addr);
|
|
|
|
if (prtad != bp->mdio.prtad) {
|
|
DP(NETIF_MSG_LINK, "prtad missmatch (cmd:0x%x != bp:0x%x)\n",
|
|
prtad, bp->mdio.prtad);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* The HW expects different devad if CL22 is used */
|
|
devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad;
|
|
|
|
bnx2x_acquire_phy_lock(bp);
|
|
rc = bnx2x_cl45_read(bp, BP_PORT(bp), phy_type, prtad,
|
|
devad, addr, &value);
|
|
bnx2x_release_phy_lock(bp);
|
|
DP(NETIF_MSG_LINK, "mdio_read_val 0x%x rc = 0x%x\n", value, rc);
|
|
|
|
if (!rc)
|
|
rc = value;
|
|
return rc;
|
|
}
|
|
|
|
/* called with rtnl_lock */
|
|
static int bnx2x_mdio_write(struct net_device *netdev, int prtad, int devad,
|
|
u16 addr, u16 value)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(netdev);
|
|
u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
|
|
int rc;
|
|
|
|
DP(NETIF_MSG_LINK, "mdio_write: prtad 0x%x, devad 0x%x, addr 0x%x,"
|
|
" value 0x%x\n", prtad, devad, addr, value);
|
|
|
|
if (prtad != bp->mdio.prtad) {
|
|
DP(NETIF_MSG_LINK, "prtad missmatch (cmd:0x%x != bp:0x%x)\n",
|
|
prtad, bp->mdio.prtad);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* The HW expects different devad if CL22 is used */
|
|
devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad;
|
|
|
|
bnx2x_acquire_phy_lock(bp);
|
|
rc = bnx2x_cl45_write(bp, BP_PORT(bp), ext_phy_type, prtad,
|
|
devad, addr, value);
|
|
bnx2x_release_phy_lock(bp);
|
|
return rc;
|
|
}
|
|
|
|
/* called with rtnl_lock */
|
|
static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
struct mii_ioctl_data *mdio = if_mii(ifr);
|
|
|
|
DP(NETIF_MSG_LINK, "ioctl: phy id 0x%x, reg 0x%x, val_in 0x%x\n",
|
|
mdio->phy_id, mdio->reg_num, mdio->val_in);
|
|
|
|
if (!netif_running(dev))
|
|
return -EAGAIN;
|
|
|
|
return mdio_mii_ioctl(&bp->mdio, mdio, cmd);
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void poll_bnx2x(struct net_device *dev)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
disable_irq(bp->pdev->irq);
|
|
bnx2x_interrupt(bp->pdev->irq, dev);
|
|
enable_irq(bp->pdev->irq);
|
|
}
|
|
#endif
|
|
|
|
static const struct net_device_ops bnx2x_netdev_ops = {
|
|
.ndo_open = bnx2x_open,
|
|
.ndo_stop = bnx2x_close,
|
|
.ndo_start_xmit = bnx2x_start_xmit,
|
|
.ndo_set_multicast_list = bnx2x_set_rx_mode,
|
|
.ndo_set_mac_address = bnx2x_change_mac_addr,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_do_ioctl = bnx2x_ioctl,
|
|
.ndo_change_mtu = bnx2x_change_mtu,
|
|
.ndo_tx_timeout = bnx2x_tx_timeout,
|
|
#ifdef BCM_VLAN
|
|
.ndo_vlan_rx_register = bnx2x_vlan_rx_register,
|
|
#endif
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = poll_bnx2x,
|
|
#endif
|
|
};
|
|
|
|
static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
|
|
struct net_device *dev)
|
|
{
|
|
struct bnx2x *bp;
|
|
int rc;
|
|
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
bp = netdev_priv(dev);
|
|
|
|
bp->dev = dev;
|
|
bp->pdev = pdev;
|
|
bp->flags = 0;
|
|
bp->func = PCI_FUNC(pdev->devfn);
|
|
|
|
rc = pci_enable_device(pdev);
|
|
if (rc) {
|
|
dev_err(&bp->pdev->dev,
|
|
"Cannot enable PCI device, aborting\n");
|
|
goto err_out;
|
|
}
|
|
|
|
if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
|
|
dev_err(&bp->pdev->dev,
|
|
"Cannot find PCI device base address, aborting\n");
|
|
rc = -ENODEV;
|
|
goto err_out_disable;
|
|
}
|
|
|
|
if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) {
|
|
dev_err(&bp->pdev->dev, "Cannot find second PCI device"
|
|
" base address, aborting\n");
|
|
rc = -ENODEV;
|
|
goto err_out_disable;
|
|
}
|
|
|
|
if (atomic_read(&pdev->enable_cnt) == 1) {
|
|
rc = pci_request_regions(pdev, DRV_MODULE_NAME);
|
|
if (rc) {
|
|
dev_err(&bp->pdev->dev,
|
|
"Cannot obtain PCI resources, aborting\n");
|
|
goto err_out_disable;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
pci_save_state(pdev);
|
|
}
|
|
|
|
bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
|
|
if (bp->pm_cap == 0) {
|
|
dev_err(&bp->pdev->dev,
|
|
"Cannot find power management capability, aborting\n");
|
|
rc = -EIO;
|
|
goto err_out_release;
|
|
}
|
|
|
|
bp->pcie_cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
|
|
if (bp->pcie_cap == 0) {
|
|
dev_err(&bp->pdev->dev,
|
|
"Cannot find PCI Express capability, aborting\n");
|
|
rc = -EIO;
|
|
goto err_out_release;
|
|
}
|
|
|
|
if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) == 0) {
|
|
bp->flags |= USING_DAC_FLAG;
|
|
if (dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)) != 0) {
|
|
dev_err(&bp->pdev->dev, "dma_set_coherent_mask"
|
|
" failed, aborting\n");
|
|
rc = -EIO;
|
|
goto err_out_release;
|
|
}
|
|
|
|
} else if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)) != 0) {
|
|
dev_err(&bp->pdev->dev,
|
|
"System does not support DMA, aborting\n");
|
|
rc = -EIO;
|
|
goto err_out_release;
|
|
}
|
|
|
|
dev->mem_start = pci_resource_start(pdev, 0);
|
|
dev->base_addr = dev->mem_start;
|
|
dev->mem_end = pci_resource_end(pdev, 0);
|
|
|
|
dev->irq = pdev->irq;
|
|
|
|
bp->regview = pci_ioremap_bar(pdev, 0);
|
|
if (!bp->regview) {
|
|
dev_err(&bp->pdev->dev,
|
|
"Cannot map register space, aborting\n");
|
|
rc = -ENOMEM;
|
|
goto err_out_release;
|
|
}
|
|
|
|
bp->doorbells = ioremap_nocache(pci_resource_start(pdev, 2),
|
|
min_t(u64, BNX2X_DB_SIZE,
|
|
pci_resource_len(pdev, 2)));
|
|
if (!bp->doorbells) {
|
|
dev_err(&bp->pdev->dev,
|
|
"Cannot map doorbell space, aborting\n");
|
|
rc = -ENOMEM;
|
|
goto err_out_unmap;
|
|
}
|
|
|
|
bnx2x_set_power_state(bp, PCI_D0);
|
|
|
|
/* clean indirect addresses */
|
|
pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
|
|
PCICFG_VENDOR_ID_OFFSET);
|
|
REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0 + BP_PORT(bp)*16, 0);
|
|
REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0 + BP_PORT(bp)*16, 0);
|
|
REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0 + BP_PORT(bp)*16, 0);
|
|
REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0 + BP_PORT(bp)*16, 0);
|
|
|
|
/* Reset the load counter */
|
|
bnx2x_clear_load_cnt(bp);
|
|
|
|
dev->watchdog_timeo = TX_TIMEOUT;
|
|
|
|
dev->netdev_ops = &bnx2x_netdev_ops;
|
|
bnx2x_set_ethtool_ops(dev);
|
|
dev->features |= NETIF_F_SG;
|
|
dev->features |= NETIF_F_HW_CSUM;
|
|
if (bp->flags & USING_DAC_FLAG)
|
|
dev->features |= NETIF_F_HIGHDMA;
|
|
dev->features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
|
|
dev->features |= NETIF_F_TSO6;
|
|
#ifdef BCM_VLAN
|
|
dev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
|
|
bp->flags |= (HW_VLAN_RX_FLAG | HW_VLAN_TX_FLAG);
|
|
|
|
dev->vlan_features |= NETIF_F_SG;
|
|
dev->vlan_features |= NETIF_F_HW_CSUM;
|
|
if (bp->flags & USING_DAC_FLAG)
|
|
dev->vlan_features |= NETIF_F_HIGHDMA;
|
|
dev->vlan_features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
|
|
dev->vlan_features |= NETIF_F_TSO6;
|
|
#endif
|
|
|
|
/* get_port_hwinfo() will set prtad and mmds properly */
|
|
bp->mdio.prtad = MDIO_PRTAD_NONE;
|
|
bp->mdio.mmds = 0;
|
|
bp->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
|
|
bp->mdio.dev = dev;
|
|
bp->mdio.mdio_read = bnx2x_mdio_read;
|
|
bp->mdio.mdio_write = bnx2x_mdio_write;
|
|
|
|
return 0;
|
|
|
|
err_out_unmap:
|
|
if (bp->regview) {
|
|
iounmap(bp->regview);
|
|
bp->regview = NULL;
|
|
}
|
|
if (bp->doorbells) {
|
|
iounmap(bp->doorbells);
|
|
bp->doorbells = NULL;
|
|
}
|
|
|
|
err_out_release:
|
|
if (atomic_read(&pdev->enable_cnt) == 1)
|
|
pci_release_regions(pdev);
|
|
|
|
err_out_disable:
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
|
|
err_out:
|
|
return rc;
|
|
}
|
|
|
|
static void __devinit bnx2x_get_pcie_width_speed(struct bnx2x *bp,
|
|
int *width, int *speed)
|
|
{
|
|
u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL);
|
|
|
|
*width = (val & PCICFG_LINK_WIDTH) >> PCICFG_LINK_WIDTH_SHIFT;
|
|
|
|
/* return value of 1=2.5GHz 2=5GHz */
|
|
*speed = (val & PCICFG_LINK_SPEED) >> PCICFG_LINK_SPEED_SHIFT;
|
|
}
|
|
|
|
static int __devinit bnx2x_check_firmware(struct bnx2x *bp)
|
|
{
|
|
const struct firmware *firmware = bp->firmware;
|
|
struct bnx2x_fw_file_hdr *fw_hdr;
|
|
struct bnx2x_fw_file_section *sections;
|
|
u32 offset, len, num_ops;
|
|
u16 *ops_offsets;
|
|
int i;
|
|
const u8 *fw_ver;
|
|
|
|
if (firmware->size < sizeof(struct bnx2x_fw_file_hdr))
|
|
return -EINVAL;
|
|
|
|
fw_hdr = (struct bnx2x_fw_file_hdr *)firmware->data;
|
|
sections = (struct bnx2x_fw_file_section *)fw_hdr;
|
|
|
|
/* Make sure none of the offsets and sizes make us read beyond
|
|
* the end of the firmware data */
|
|
for (i = 0; i < sizeof(*fw_hdr) / sizeof(*sections); i++) {
|
|
offset = be32_to_cpu(sections[i].offset);
|
|
len = be32_to_cpu(sections[i].len);
|
|
if (offset + len > firmware->size) {
|
|
dev_err(&bp->pdev->dev,
|
|
"Section %d length is out of bounds\n", i);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* Likewise for the init_ops offsets */
|
|
offset = be32_to_cpu(fw_hdr->init_ops_offsets.offset);
|
|
ops_offsets = (u16 *)(firmware->data + offset);
|
|
num_ops = be32_to_cpu(fw_hdr->init_ops.len) / sizeof(struct raw_op);
|
|
|
|
for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) {
|
|
if (be16_to_cpu(ops_offsets[i]) > num_ops) {
|
|
dev_err(&bp->pdev->dev,
|
|
"Section offset %d is out of bounds\n", i);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* Check FW version */
|
|
offset = be32_to_cpu(fw_hdr->fw_version.offset);
|
|
fw_ver = firmware->data + offset;
|
|
if ((fw_ver[0] != BCM_5710_FW_MAJOR_VERSION) ||
|
|
(fw_ver[1] != BCM_5710_FW_MINOR_VERSION) ||
|
|
(fw_ver[2] != BCM_5710_FW_REVISION_VERSION) ||
|
|
(fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) {
|
|
dev_err(&bp->pdev->dev,
|
|
"Bad FW version:%d.%d.%d.%d. Should be %d.%d.%d.%d\n",
|
|
fw_ver[0], fw_ver[1], fw_ver[2],
|
|
fw_ver[3], BCM_5710_FW_MAJOR_VERSION,
|
|
BCM_5710_FW_MINOR_VERSION,
|
|
BCM_5710_FW_REVISION_VERSION,
|
|
BCM_5710_FW_ENGINEERING_VERSION);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void be32_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
|
|
{
|
|
const __be32 *source = (const __be32 *)_source;
|
|
u32 *target = (u32 *)_target;
|
|
u32 i;
|
|
|
|
for (i = 0; i < n/4; i++)
|
|
target[i] = be32_to_cpu(source[i]);
|
|
}
|
|
|
|
/*
|
|
Ops array is stored in the following format:
|
|
{op(8bit), offset(24bit, big endian), data(32bit, big endian)}
|
|
*/
|
|
static inline void bnx2x_prep_ops(const u8 *_source, u8 *_target, u32 n)
|
|
{
|
|
const __be32 *source = (const __be32 *)_source;
|
|
struct raw_op *target = (struct raw_op *)_target;
|
|
u32 i, j, tmp;
|
|
|
|
for (i = 0, j = 0; i < n/8; i++, j += 2) {
|
|
tmp = be32_to_cpu(source[j]);
|
|
target[i].op = (tmp >> 24) & 0xff;
|
|
target[i].offset = tmp & 0xffffff;
|
|
target[i].raw_data = be32_to_cpu(source[j + 1]);
|
|
}
|
|
}
|
|
|
|
static inline void be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
|
|
{
|
|
const __be16 *source = (const __be16 *)_source;
|
|
u16 *target = (u16 *)_target;
|
|
u32 i;
|
|
|
|
for (i = 0; i < n/2; i++)
|
|
target[i] = be16_to_cpu(source[i]);
|
|
}
|
|
|
|
#define BNX2X_ALLOC_AND_SET(arr, lbl, func) \
|
|
do { \
|
|
u32 len = be32_to_cpu(fw_hdr->arr.len); \
|
|
bp->arr = kmalloc(len, GFP_KERNEL); \
|
|
if (!bp->arr) { \
|
|
pr_err("Failed to allocate %d bytes for "#arr"\n", len); \
|
|
goto lbl; \
|
|
} \
|
|
func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset), \
|
|
(u8 *)bp->arr, len); \
|
|
} while (0)
|
|
|
|
static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev)
|
|
{
|
|
const char *fw_file_name;
|
|
struct bnx2x_fw_file_hdr *fw_hdr;
|
|
int rc;
|
|
|
|
if (CHIP_IS_E1(bp))
|
|
fw_file_name = FW_FILE_NAME_E1;
|
|
else if (CHIP_IS_E1H(bp))
|
|
fw_file_name = FW_FILE_NAME_E1H;
|
|
else {
|
|
dev_err(dev, "Unsupported chip revision\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_info(dev, "Loading %s\n", fw_file_name);
|
|
|
|
rc = request_firmware(&bp->firmware, fw_file_name, dev);
|
|
if (rc) {
|
|
dev_err(dev, "Can't load firmware file %s\n", fw_file_name);
|
|
goto request_firmware_exit;
|
|
}
|
|
|
|
rc = bnx2x_check_firmware(bp);
|
|
if (rc) {
|
|
dev_err(dev, "Corrupt firmware file %s\n", fw_file_name);
|
|
goto request_firmware_exit;
|
|
}
|
|
|
|
fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data;
|
|
|
|
/* Initialize the pointers to the init arrays */
|
|
/* Blob */
|
|
BNX2X_ALLOC_AND_SET(init_data, request_firmware_exit, be32_to_cpu_n);
|
|
|
|
/* Opcodes */
|
|
BNX2X_ALLOC_AND_SET(init_ops, init_ops_alloc_err, bnx2x_prep_ops);
|
|
|
|
/* Offsets */
|
|
BNX2X_ALLOC_AND_SET(init_ops_offsets, init_offsets_alloc_err,
|
|
be16_to_cpu_n);
|
|
|
|
/* STORMs firmware */
|
|
INIT_TSEM_INT_TABLE_DATA(bp) = bp->firmware->data +
|
|
be32_to_cpu(fw_hdr->tsem_int_table_data.offset);
|
|
INIT_TSEM_PRAM_DATA(bp) = bp->firmware->data +
|
|
be32_to_cpu(fw_hdr->tsem_pram_data.offset);
|
|
INIT_USEM_INT_TABLE_DATA(bp) = bp->firmware->data +
|
|
be32_to_cpu(fw_hdr->usem_int_table_data.offset);
|
|
INIT_USEM_PRAM_DATA(bp) = bp->firmware->data +
|
|
be32_to_cpu(fw_hdr->usem_pram_data.offset);
|
|
INIT_XSEM_INT_TABLE_DATA(bp) = bp->firmware->data +
|
|
be32_to_cpu(fw_hdr->xsem_int_table_data.offset);
|
|
INIT_XSEM_PRAM_DATA(bp) = bp->firmware->data +
|
|
be32_to_cpu(fw_hdr->xsem_pram_data.offset);
|
|
INIT_CSEM_INT_TABLE_DATA(bp) = bp->firmware->data +
|
|
be32_to_cpu(fw_hdr->csem_int_table_data.offset);
|
|
INIT_CSEM_PRAM_DATA(bp) = bp->firmware->data +
|
|
be32_to_cpu(fw_hdr->csem_pram_data.offset);
|
|
|
|
return 0;
|
|
|
|
init_offsets_alloc_err:
|
|
kfree(bp->init_ops);
|
|
init_ops_alloc_err:
|
|
kfree(bp->init_data);
|
|
request_firmware_exit:
|
|
release_firmware(bp->firmware);
|
|
|
|
return rc;
|
|
}
|
|
|
|
|
|
static int __devinit bnx2x_init_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct net_device *dev = NULL;
|
|
struct bnx2x *bp;
|
|
int pcie_width, pcie_speed;
|
|
int rc;
|
|
|
|
/* dev zeroed in init_etherdev */
|
|
dev = alloc_etherdev_mq(sizeof(*bp), MAX_CONTEXT);
|
|
if (!dev) {
|
|
dev_err(&pdev->dev, "Cannot allocate net device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
bp = netdev_priv(dev);
|
|
bp->msg_enable = debug;
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
|
|
rc = bnx2x_init_dev(pdev, dev);
|
|
if (rc < 0) {
|
|
free_netdev(dev);
|
|
return rc;
|
|
}
|
|
|
|
rc = bnx2x_init_bp(bp);
|
|
if (rc)
|
|
goto init_one_exit;
|
|
|
|
/* Set init arrays */
|
|
rc = bnx2x_init_firmware(bp, &pdev->dev);
|
|
if (rc) {
|
|
dev_err(&pdev->dev, "Error loading firmware\n");
|
|
goto init_one_exit;
|
|
}
|
|
|
|
rc = register_netdev(dev);
|
|
if (rc) {
|
|
dev_err(&pdev->dev, "Cannot register net device\n");
|
|
goto init_one_exit;
|
|
}
|
|
|
|
bnx2x_get_pcie_width_speed(bp, &pcie_width, &pcie_speed);
|
|
netdev_info(dev, "%s (%c%d) PCI-E x%d %s found at mem %lx,"
|
|
" IRQ %d, ", board_info[ent->driver_data].name,
|
|
(CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
|
|
pcie_width, (pcie_speed == 2) ? "5GHz (Gen2)" : "2.5GHz",
|
|
dev->base_addr, bp->pdev->irq);
|
|
pr_cont("node addr %pM\n", dev->dev_addr);
|
|
|
|
return 0;
|
|
|
|
init_one_exit:
|
|
if (bp->regview)
|
|
iounmap(bp->regview);
|
|
|
|
if (bp->doorbells)
|
|
iounmap(bp->doorbells);
|
|
|
|
free_netdev(dev);
|
|
|
|
if (atomic_read(&pdev->enable_cnt) == 1)
|
|
pci_release_regions(pdev);
|
|
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct bnx2x *bp;
|
|
|
|
if (!dev) {
|
|
dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n");
|
|
return;
|
|
}
|
|
bp = netdev_priv(dev);
|
|
|
|
unregister_netdev(dev);
|
|
|
|
/* Make sure RESET task is not scheduled before continuing */
|
|
cancel_delayed_work_sync(&bp->reset_task);
|
|
|
|
kfree(bp->init_ops_offsets);
|
|
kfree(bp->init_ops);
|
|
kfree(bp->init_data);
|
|
release_firmware(bp->firmware);
|
|
|
|
if (bp->regview)
|
|
iounmap(bp->regview);
|
|
|
|
if (bp->doorbells)
|
|
iounmap(bp->doorbells);
|
|
|
|
free_netdev(dev);
|
|
|
|
if (atomic_read(&pdev->enable_cnt) == 1)
|
|
pci_release_regions(pdev);
|
|
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
}
|
|
|
|
static int bnx2x_eeh_nic_unload(struct bnx2x *bp)
|
|
{
|
|
int i;
|
|
|
|
bp->state = BNX2X_STATE_ERROR;
|
|
|
|
bp->rx_mode = BNX2X_RX_MODE_NONE;
|
|
|
|
bnx2x_netif_stop(bp, 0);
|
|
netif_carrier_off(bp->dev);
|
|
|
|
del_timer_sync(&bp->timer);
|
|
bp->stats_state = STATS_STATE_DISABLED;
|
|
DP(BNX2X_MSG_STATS, "stats_state - DISABLED\n");
|
|
|
|
/* Release IRQs */
|
|
bnx2x_free_irq(bp, false);
|
|
|
|
if (CHIP_IS_E1(bp)) {
|
|
struct mac_configuration_cmd *config =
|
|
bnx2x_sp(bp, mcast_config);
|
|
|
|
for (i = 0; i < config->hdr.length; i++)
|
|
CAM_INVALIDATE(config->config_table[i]);
|
|
}
|
|
|
|
/* Free SKBs, SGEs, TPA pool and driver internals */
|
|
bnx2x_free_skbs(bp);
|
|
for_each_queue(bp, i)
|
|
bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
|
|
for_each_queue(bp, i)
|
|
netif_napi_del(&bnx2x_fp(bp, i, napi));
|
|
bnx2x_free_mem(bp);
|
|
|
|
bp->state = BNX2X_STATE_CLOSED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bnx2x_eeh_recover(struct bnx2x *bp)
|
|
{
|
|
u32 val;
|
|
|
|
mutex_init(&bp->port.phy_mutex);
|
|
|
|
bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
|
|
bp->link_params.shmem_base = bp->common.shmem_base;
|
|
BNX2X_DEV_INFO("shmem offset is 0x%x\n", bp->common.shmem_base);
|
|
|
|
if (!bp->common.shmem_base ||
|
|
(bp->common.shmem_base < 0xA0000) ||
|
|
(bp->common.shmem_base >= 0xC0000)) {
|
|
BNX2X_DEV_INFO("MCP not active\n");
|
|
bp->flags |= NO_MCP_FLAG;
|
|
return;
|
|
}
|
|
|
|
val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]);
|
|
if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
|
|
!= (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
|
|
BNX2X_ERR("BAD MCP validity signature\n");
|
|
|
|
if (!BP_NOMCP(bp)) {
|
|
bp->fw_seq = (SHMEM_RD(bp, func_mb[BP_FUNC(bp)].drv_mb_header)
|
|
& DRV_MSG_SEQ_NUMBER_MASK);
|
|
BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* bnx2x_io_error_detected - called when PCI error is detected
|
|
* @pdev: Pointer to PCI device
|
|
* @state: The current pci connection state
|
|
*
|
|
* This function is called after a PCI bus error affecting
|
|
* this device has been detected.
|
|
*/
|
|
static pci_ers_result_t bnx2x_io_error_detected(struct pci_dev *pdev,
|
|
pci_channel_state_t state)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
rtnl_lock();
|
|
|
|
netif_device_detach(dev);
|
|
|
|
if (state == pci_channel_io_perm_failure) {
|
|
rtnl_unlock();
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
}
|
|
|
|
if (netif_running(dev))
|
|
bnx2x_eeh_nic_unload(bp);
|
|
|
|
pci_disable_device(pdev);
|
|
|
|
rtnl_unlock();
|
|
|
|
/* Request a slot reset */
|
|
return PCI_ERS_RESULT_NEED_RESET;
|
|
}
|
|
|
|
/**
|
|
* bnx2x_io_slot_reset - called after the PCI bus has been reset
|
|
* @pdev: Pointer to PCI device
|
|
*
|
|
* Restart the card from scratch, as if from a cold-boot.
|
|
*/
|
|
static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
rtnl_lock();
|
|
|
|
if (pci_enable_device(pdev)) {
|
|
dev_err(&pdev->dev,
|
|
"Cannot re-enable PCI device after reset\n");
|
|
rtnl_unlock();
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
pci_restore_state(pdev);
|
|
|
|
if (netif_running(dev))
|
|
bnx2x_set_power_state(bp, PCI_D0);
|
|
|
|
rtnl_unlock();
|
|
|
|
return PCI_ERS_RESULT_RECOVERED;
|
|
}
|
|
|
|
/**
|
|
* bnx2x_io_resume - called when traffic can start flowing again
|
|
* @pdev: Pointer to PCI device
|
|
*
|
|
* This callback is called when the error recovery driver tells us that
|
|
* its OK to resume normal operation.
|
|
*/
|
|
static void bnx2x_io_resume(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
|
|
printk(KERN_ERR "Handling parity error recovery. Try again later\n");
|
|
return;
|
|
}
|
|
|
|
rtnl_lock();
|
|
|
|
bnx2x_eeh_recover(bp);
|
|
|
|
if (netif_running(dev))
|
|
bnx2x_nic_load(bp, LOAD_NORMAL);
|
|
|
|
netif_device_attach(dev);
|
|
|
|
rtnl_unlock();
|
|
}
|
|
|
|
static struct pci_error_handlers bnx2x_err_handler = {
|
|
.error_detected = bnx2x_io_error_detected,
|
|
.slot_reset = bnx2x_io_slot_reset,
|
|
.resume = bnx2x_io_resume,
|
|
};
|
|
|
|
static struct pci_driver bnx2x_pci_driver = {
|
|
.name = DRV_MODULE_NAME,
|
|
.id_table = bnx2x_pci_tbl,
|
|
.probe = bnx2x_init_one,
|
|
.remove = __devexit_p(bnx2x_remove_one),
|
|
.suspend = bnx2x_suspend,
|
|
.resume = bnx2x_resume,
|
|
.err_handler = &bnx2x_err_handler,
|
|
};
|
|
|
|
static int __init bnx2x_init(void)
|
|
{
|
|
int ret;
|
|
|
|
pr_info("%s", version);
|
|
|
|
bnx2x_wq = create_singlethread_workqueue("bnx2x");
|
|
if (bnx2x_wq == NULL) {
|
|
pr_err("Cannot create workqueue\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ret = pci_register_driver(&bnx2x_pci_driver);
|
|
if (ret) {
|
|
pr_err("Cannot register driver\n");
|
|
destroy_workqueue(bnx2x_wq);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void __exit bnx2x_cleanup(void)
|
|
{
|
|
pci_unregister_driver(&bnx2x_pci_driver);
|
|
|
|
destroy_workqueue(bnx2x_wq);
|
|
}
|
|
|
|
module_init(bnx2x_init);
|
|
module_exit(bnx2x_cleanup);
|
|
|
|
#ifdef BCM_CNIC
|
|
|
|
/* count denotes the number of new completions we have seen */
|
|
static void bnx2x_cnic_sp_post(struct bnx2x *bp, int count)
|
|
{
|
|
struct eth_spe *spe;
|
|
|
|
#ifdef BNX2X_STOP_ON_ERROR
|
|
if (unlikely(bp->panic))
|
|
return;
|
|
#endif
|
|
|
|
spin_lock_bh(&bp->spq_lock);
|
|
bp->cnic_spq_pending -= count;
|
|
|
|
for (; bp->cnic_spq_pending < bp->cnic_eth_dev.max_kwqe_pending;
|
|
bp->cnic_spq_pending++) {
|
|
|
|
if (!bp->cnic_kwq_pending)
|
|
break;
|
|
|
|
spe = bnx2x_sp_get_next(bp);
|
|
*spe = *bp->cnic_kwq_cons;
|
|
|
|
bp->cnic_kwq_pending--;
|
|
|
|
DP(NETIF_MSG_TIMER, "pending on SPQ %d, on KWQ %d count %d\n",
|
|
bp->cnic_spq_pending, bp->cnic_kwq_pending, count);
|
|
|
|
if (bp->cnic_kwq_cons == bp->cnic_kwq_last)
|
|
bp->cnic_kwq_cons = bp->cnic_kwq;
|
|
else
|
|
bp->cnic_kwq_cons++;
|
|
}
|
|
bnx2x_sp_prod_update(bp);
|
|
spin_unlock_bh(&bp->spq_lock);
|
|
}
|
|
|
|
static int bnx2x_cnic_sp_queue(struct net_device *dev,
|
|
struct kwqe_16 *kwqes[], u32 count)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
int i;
|
|
|
|
#ifdef BNX2X_STOP_ON_ERROR
|
|
if (unlikely(bp->panic))
|
|
return -EIO;
|
|
#endif
|
|
|
|
spin_lock_bh(&bp->spq_lock);
|
|
|
|
for (i = 0; i < count; i++) {
|
|
struct eth_spe *spe = (struct eth_spe *)kwqes[i];
|
|
|
|
if (bp->cnic_kwq_pending == MAX_SP_DESC_CNT)
|
|
break;
|
|
|
|
*bp->cnic_kwq_prod = *spe;
|
|
|
|
bp->cnic_kwq_pending++;
|
|
|
|
DP(NETIF_MSG_TIMER, "L5 SPQE %x %x %x:%x pos %d\n",
|
|
spe->hdr.conn_and_cmd_data, spe->hdr.type,
|
|
spe->data.mac_config_addr.hi,
|
|
spe->data.mac_config_addr.lo,
|
|
bp->cnic_kwq_pending);
|
|
|
|
if (bp->cnic_kwq_prod == bp->cnic_kwq_last)
|
|
bp->cnic_kwq_prod = bp->cnic_kwq;
|
|
else
|
|
bp->cnic_kwq_prod++;
|
|
}
|
|
|
|
spin_unlock_bh(&bp->spq_lock);
|
|
|
|
if (bp->cnic_spq_pending < bp->cnic_eth_dev.max_kwqe_pending)
|
|
bnx2x_cnic_sp_post(bp, 0);
|
|
|
|
return i;
|
|
}
|
|
|
|
static int bnx2x_cnic_ctl_send(struct bnx2x *bp, struct cnic_ctl_info *ctl)
|
|
{
|
|
struct cnic_ops *c_ops;
|
|
int rc = 0;
|
|
|
|
mutex_lock(&bp->cnic_mutex);
|
|
c_ops = bp->cnic_ops;
|
|
if (c_ops)
|
|
rc = c_ops->cnic_ctl(bp->cnic_data, ctl);
|
|
mutex_unlock(&bp->cnic_mutex);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_cnic_ctl_send_bh(struct bnx2x *bp, struct cnic_ctl_info *ctl)
|
|
{
|
|
struct cnic_ops *c_ops;
|
|
int rc = 0;
|
|
|
|
rcu_read_lock();
|
|
c_ops = rcu_dereference(bp->cnic_ops);
|
|
if (c_ops)
|
|
rc = c_ops->cnic_ctl(bp->cnic_data, ctl);
|
|
rcu_read_unlock();
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* for commands that have no data
|
|
*/
|
|
int bnx2x_cnic_notify(struct bnx2x *bp, int cmd)
|
|
{
|
|
struct cnic_ctl_info ctl = {0};
|
|
|
|
ctl.cmd = cmd;
|
|
|
|
return bnx2x_cnic_ctl_send(bp, &ctl);
|
|
}
|
|
|
|
static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid)
|
|
{
|
|
struct cnic_ctl_info ctl;
|
|
|
|
/* first we tell CNIC and only then we count this as a completion */
|
|
ctl.cmd = CNIC_CTL_COMPLETION_CMD;
|
|
ctl.data.comp.cid = cid;
|
|
|
|
bnx2x_cnic_ctl_send_bh(bp, &ctl);
|
|
bnx2x_cnic_sp_post(bp, 1);
|
|
}
|
|
|
|
static int bnx2x_drv_ctl(struct net_device *dev, struct drv_ctl_info *ctl)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
int rc = 0;
|
|
|
|
switch (ctl->cmd) {
|
|
case DRV_CTL_CTXTBL_WR_CMD: {
|
|
u32 index = ctl->data.io.offset;
|
|
dma_addr_t addr = ctl->data.io.dma_addr;
|
|
|
|
bnx2x_ilt_wr(bp, index, addr);
|
|
break;
|
|
}
|
|
|
|
case DRV_CTL_COMPLETION_CMD: {
|
|
int count = ctl->data.comp.comp_count;
|
|
|
|
bnx2x_cnic_sp_post(bp, count);
|
|
break;
|
|
}
|
|
|
|
/* rtnl_lock is held. */
|
|
case DRV_CTL_START_L2_CMD: {
|
|
u32 cli = ctl->data.ring.client_id;
|
|
|
|
bp->rx_mode_cl_mask |= (1 << cli);
|
|
bnx2x_set_storm_rx_mode(bp);
|
|
break;
|
|
}
|
|
|
|
/* rtnl_lock is held. */
|
|
case DRV_CTL_STOP_L2_CMD: {
|
|
u32 cli = ctl->data.ring.client_id;
|
|
|
|
bp->rx_mode_cl_mask &= ~(1 << cli);
|
|
bnx2x_set_storm_rx_mode(bp);
|
|
break;
|
|
}
|
|
|
|
default:
|
|
BNX2X_ERR("unknown command %x\n", ctl->cmd);
|
|
rc = -EINVAL;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
void bnx2x_setup_cnic_irq_info(struct bnx2x *bp)
|
|
{
|
|
struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
|
|
|
|
if (bp->flags & USING_MSIX_FLAG) {
|
|
cp->drv_state |= CNIC_DRV_STATE_USING_MSIX;
|
|
cp->irq_arr[0].irq_flags |= CNIC_IRQ_FL_MSIX;
|
|
cp->irq_arr[0].vector = bp->msix_table[1].vector;
|
|
} else {
|
|
cp->drv_state &= ~CNIC_DRV_STATE_USING_MSIX;
|
|
cp->irq_arr[0].irq_flags &= ~CNIC_IRQ_FL_MSIX;
|
|
}
|
|
cp->irq_arr[0].status_blk = bp->cnic_sb;
|
|
cp->irq_arr[0].status_blk_num = CNIC_SB_ID(bp);
|
|
cp->irq_arr[1].status_blk = bp->def_status_blk;
|
|
cp->irq_arr[1].status_blk_num = DEF_SB_ID;
|
|
|
|
cp->num_irq = 2;
|
|
}
|
|
|
|
static int bnx2x_register_cnic(struct net_device *dev, struct cnic_ops *ops,
|
|
void *data)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
|
|
|
|
if (ops == NULL)
|
|
return -EINVAL;
|
|
|
|
if (atomic_read(&bp->intr_sem) != 0)
|
|
return -EBUSY;
|
|
|
|
bp->cnic_kwq = kzalloc(PAGE_SIZE, GFP_KERNEL);
|
|
if (!bp->cnic_kwq)
|
|
return -ENOMEM;
|
|
|
|
bp->cnic_kwq_cons = bp->cnic_kwq;
|
|
bp->cnic_kwq_prod = bp->cnic_kwq;
|
|
bp->cnic_kwq_last = bp->cnic_kwq + MAX_SP_DESC_CNT;
|
|
|
|
bp->cnic_spq_pending = 0;
|
|
bp->cnic_kwq_pending = 0;
|
|
|
|
bp->cnic_data = data;
|
|
|
|
cp->num_irq = 0;
|
|
cp->drv_state = CNIC_DRV_STATE_REGD;
|
|
|
|
bnx2x_init_sb(bp, bp->cnic_sb, bp->cnic_sb_mapping, CNIC_SB_ID(bp));
|
|
|
|
bnx2x_setup_cnic_irq_info(bp);
|
|
bnx2x_set_iscsi_eth_mac_addr(bp, 1);
|
|
bp->cnic_flags |= BNX2X_CNIC_FLAG_MAC_SET;
|
|
rcu_assign_pointer(bp->cnic_ops, ops);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_unregister_cnic(struct net_device *dev)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
|
|
|
|
mutex_lock(&bp->cnic_mutex);
|
|
if (bp->cnic_flags & BNX2X_CNIC_FLAG_MAC_SET) {
|
|
bp->cnic_flags &= ~BNX2X_CNIC_FLAG_MAC_SET;
|
|
bnx2x_set_iscsi_eth_mac_addr(bp, 0);
|
|
}
|
|
cp->drv_state = 0;
|
|
rcu_assign_pointer(bp->cnic_ops, NULL);
|
|
mutex_unlock(&bp->cnic_mutex);
|
|
synchronize_rcu();
|
|
kfree(bp->cnic_kwq);
|
|
bp->cnic_kwq = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
|
|
|
|
cp->drv_owner = THIS_MODULE;
|
|
cp->chip_id = CHIP_ID(bp);
|
|
cp->pdev = bp->pdev;
|
|
cp->io_base = bp->regview;
|
|
cp->io_base2 = bp->doorbells;
|
|
cp->max_kwqe_pending = 8;
|
|
cp->ctx_blk_size = CNIC_CTX_PER_ILT * sizeof(union cdu_context);
|
|
cp->ctx_tbl_offset = FUNC_ILT_BASE(BP_FUNC(bp)) + 1;
|
|
cp->ctx_tbl_len = CNIC_ILT_LINES;
|
|
cp->starting_cid = BCM_CNIC_CID_START;
|
|
cp->drv_submit_kwqes_16 = bnx2x_cnic_sp_queue;
|
|
cp->drv_ctl = bnx2x_drv_ctl;
|
|
cp->drv_register_cnic = bnx2x_register_cnic;
|
|
cp->drv_unregister_cnic = bnx2x_unregister_cnic;
|
|
|
|
return cp;
|
|
}
|
|
EXPORT_SYMBOL(bnx2x_cnic_probe);
|
|
|
|
#endif /* BCM_CNIC */
|
|
|