mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-26 12:50:53 +07:00
1d6da87a32
Pull drm updates from Dave Airlie: "Here's the main drm pull request for 4.7, it's been a busy one, and I've been a bit more distracted in real life this merge window. Lots more ARM drivers, not sure if it'll ever end. I think I've at least one more coming the next merge window. But changes are all over the place, support for AMD Polaris GPUs is in here, some missing GM108 support for nouveau (found in some Lenovos), a bunch of MST and skylake fixes. I've also noticed a few fixes from Arnd in my inbox, that I'll try and get in asap, but I didn't think they should hold this up. New drivers: - Hisilicon kirin display driver - Mediatek MT8173 display driver - ARC PGU - bitstreamer on Synopsys ARC SDP boards - Allwinner A13 initial RGB output driver - Analogix driver for DisplayPort IP found in exynos and rockchip DRM Core: - UAPI headers fixes and C++ safety - DRM connector reference counting - DisplayID mode parsing for Dell 5K monitors - Removal of struct_mutex from drivers - Connector registration cleanups - MST robustness fixes - MAINTAINERS updates - Lockless GEM object freeing - Generic fbdev deferred IO support panel: - Support for a bunch of new panels i915: - VBT refactoring - PLL computation cleanups - DSI support for BXT - Color manager support - More atomic patches - GEM improvements - GuC fw loading fixes - DP detection fixes - SKL GPU hang fixes - Lots of BXT fixes radeon/amdgpu: - Initial Polaris support - GPUVM/Scheduler/Clock/Power improvements - ASYNC pageflip support - New mesa feature support nouveau: - GM108 support - Power sensor support improvements - GR init + ucode fixes. - Use GPU provided topology information vmwgfx: - Add host messaging support gma500: - Some cleanups and fixes atmel: - Bridge support - Async atomic commit support fsl-dcu: - Timing controller for LCD support - Pixel clock polarity support rcar-du: - Misc fixes exynos: - Pipeline clock support - Exynoss4533 SoC support - HW trigger mode support - export HDMI_PHY clock - DECON5433 fixes - Use generic prime functions - use DMA mapping APIs rockchip: - Lots of little fixes vc4: - Render node support - Gamma ramp support - DPI output support msm: - Mostly cleanups and fixes - Conversion to generic struct fence etnaviv: - Fix for prime buffer handling - Allow hangcheck to be coalesced with other wakeups tegra: - Gamme table size fix" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1050 commits) drm/edid: add displayid detailed 1 timings to the modelist. (v1.1) drm/edid: move displayid validation to it's own function. drm/displayid: Iterate over all DisplayID blocks drm/edid: move displayid tiled block parsing into separate function. drm: Nuke ->vblank_disable_allowed drm/vmwgfx: Report vmwgfx version to vmware.log drm/vmwgfx: Add VMWare host messaging capability drm/vmwgfx: Kill some lockdep warnings drm/nouveau/gr/gf100-: fix race condition in fecs/gpccs ucode drm/nouveau/core: recognise GM108 chipsets drm/nouveau/gr/gm107-: fix touching non-existent ppcs in attrib cb setup drm/nouveau/gr/gk104-: share implementation of ppc exception init drm/nouveau/gr/gk104-: move rop_active_fbps init to nonctx drm/nouveau/bios/pll: check BIT table version before trying to parse it drm/nouveau/bios/pll: prevent oops when limits table can't be parsed drm/nouveau/volt/gk104: round up in gk104_volt_set drm/nouveau/fb/gm200: setup mmu debug buffer registers at init() drm/nouveau/fb/gk20a,gm20b: setup mmu debug buffer registers at init() drm/nouveau/fb/gf100-: allocate mmu debug buffers drm/nouveau/fb: allow chipset-specific actions for oneinit() ...
681 lines
14 KiB
Plaintext
681 lines
14 KiB
Plaintext
/*
|
|
* Google Snow board device tree source
|
|
*
|
|
* Copyright (c) 2012 Google, Inc
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/clock/maxim,max77686.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include "exynos5250.dtsi"
|
|
|
|
/ {
|
|
aliases {
|
|
i2c104 = &i2c_104;
|
|
};
|
|
|
|
memory {
|
|
reg = <0x40000000 0x80000000>;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=tty1";
|
|
stdout-path = "serial3:115200n8";
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&power_key_irq &lid_irq>;
|
|
|
|
power {
|
|
label = "Power";
|
|
gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_POWER>;
|
|
wakeup-source;
|
|
};
|
|
|
|
lid-switch {
|
|
label = "Lid";
|
|
gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <5>; /* EV_SW */
|
|
linux,code = <0>; /* SW_LID */
|
|
debounce-interval = <1>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
vbat: vbat-fixed-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vbat-supply";
|
|
regulator-boot-on;
|
|
};
|
|
|
|
i2c-arbitrator {
|
|
compatible = "i2c-arb-gpio-challenge";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
i2c-parent = <&{/i2c@12CA0000}>;
|
|
|
|
our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
|
|
their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
|
|
slew-delay-us = <10>;
|
|
wait-retry-us = <3000>;
|
|
wait-free-us = <50000>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&arb_our_claim &arb_their_claim>;
|
|
|
|
/* Use ID 104 as a hint that we're on physical bus 4 */
|
|
i2c_104: i2c@0 {
|
|
reg = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
battery: sbs-battery@b {
|
|
compatible = "sbs,sbs-battery";
|
|
reg = <0xb>;
|
|
sbs,poll-retry-count = <1>;
|
|
};
|
|
|
|
cros_ec: embedded-controller@1e {
|
|
compatible = "google,cros-ec-i2c";
|
|
reg = <0x1e>;
|
|
interrupts = <6 IRQ_TYPE_NONE>;
|
|
interrupt-parent = <&gpx1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ec_irq>;
|
|
wakeup-source;
|
|
};
|
|
|
|
power-regulator@48 {
|
|
compatible = "ti,tps65090";
|
|
reg = <0x48>;
|
|
|
|
/*
|
|
* Config irq to disable internal pulls
|
|
* even though we run in polling mode.
|
|
*/
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&tps65090_irq>;
|
|
|
|
vsys1-supply = <&vbat>;
|
|
vsys2-supply = <&vbat>;
|
|
vsys3-supply = <&vbat>;
|
|
infet1-supply = <&vbat>;
|
|
infet2-supply = <&vbat>;
|
|
infet3-supply = <&vbat>;
|
|
infet4-supply = <&vbat>;
|
|
infet5-supply = <&vbat>;
|
|
infet6-supply = <&vbat>;
|
|
infet7-supply = <&vbat>;
|
|
vsys-l1-supply = <&vbat>;
|
|
vsys-l2-supply = <&vbat>;
|
|
|
|
regulators {
|
|
dcdc1 {
|
|
ti,enable-ext-control;
|
|
};
|
|
dcdc2 {
|
|
ti,enable-ext-control;
|
|
};
|
|
dcdc3 {
|
|
ti,enable-ext-control;
|
|
};
|
|
fet1: fet1 {
|
|
regulator-name = "vcd_led";
|
|
ti,overcurrent-wait = <3>;
|
|
};
|
|
tps65090_fet2: fet2 {
|
|
regulator-name = "video_mid";
|
|
regulator-always-on;
|
|
ti,overcurrent-wait = <3>;
|
|
};
|
|
fet3 {
|
|
regulator-name = "wwan_r";
|
|
regulator-always-on;
|
|
ti,overcurrent-wait = <3>;
|
|
};
|
|
fet4 {
|
|
regulator-name = "sdcard";
|
|
ti,overcurrent-wait = <3>;
|
|
};
|
|
fet5 {
|
|
regulator-name = "camout";
|
|
regulator-always-on;
|
|
ti,overcurrent-wait = <3>;
|
|
};
|
|
fet6: fet6 {
|
|
regulator-name = "lcd_vdd";
|
|
ti,overcurrent-wait = <3>;
|
|
};
|
|
tps65090_fet7: fet7 {
|
|
regulator-name = "video_mid_1a";
|
|
regulator-always-on;
|
|
ti,overcurrent-wait = <3>;
|
|
};
|
|
ldo1 {
|
|
};
|
|
ldo2 {
|
|
};
|
|
};
|
|
|
|
charger {
|
|
compatible = "ti,tps65090-charger";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
sound {
|
|
samsung,i2s-controller = <&i2s0>;
|
|
};
|
|
|
|
usb3_vbus_reg: regulator-usb3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "P5.0V_USB3CON";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb3_vbus_en>;
|
|
enable-active-high;
|
|
};
|
|
|
|
fixed-rate-clocks {
|
|
xxti {
|
|
compatible = "samsung,clock-xxti";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm 0 1000000 0>;
|
|
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
|
|
default-brightness-level = <7>;
|
|
enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
|
|
power-supply = <&fet1>;
|
|
pinctrl-0 = <&pwm0_out>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
panel: panel {
|
|
compatible = "auo,b116xw03";
|
|
power-supply = <&fet6>;
|
|
backlight = <&backlight>;
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&bridge_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
mmc3_pwrseq: mmc3_pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
|
|
<&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
|
|
clocks = <&max77686 MAX77686_CLK_PMIC>;
|
|
clock-names = "ext_clock";
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu0-supply = <&buck2_reg>;
|
|
};
|
|
|
|
&dp {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dp_hpd>;
|
|
samsung,color-space = <0>;
|
|
samsung,color-depth = <1>;
|
|
samsung,link-rate = <0x0a>;
|
|
samsung,lane-count = <2>;
|
|
hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
|
|
|
|
ports {
|
|
port0 {
|
|
dp_out: endpoint {
|
|
remote-endpoint = <&bridge_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&ehci {
|
|
samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
&fimd {
|
|
status = "okay";
|
|
samsung,invert-vclk;
|
|
};
|
|
|
|
&hdmi {
|
|
hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hdmi_hpd_irq>;
|
|
phy = <&hdmiphy>;
|
|
ddc = <&i2c_2>;
|
|
hdmi-en-supply = <&tps65090_fet7>;
|
|
vdd-supply = <&ldo8_reg>;
|
|
vdd_osc-supply = <&ldo10_reg>;
|
|
vdd_pll-supply = <&ldo8_reg>;
|
|
};
|
|
|
|
&i2c_0 {
|
|
status = "okay";
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <378000>;
|
|
|
|
max77686: max77686@09 {
|
|
compatible = "maxim,max77686";
|
|
interrupt-parent = <&gpx3>;
|
|
interrupts = <2 IRQ_TYPE_NONE>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&max77686_irq>;
|
|
wakeup-source;
|
|
reg = <0x09>;
|
|
#clock-cells = <1>;
|
|
|
|
voltage-regulators {
|
|
ldo1_reg: LDO1 {
|
|
regulator-name = "P1.0V_LDO_OUT1";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo2_reg: LDO2 {
|
|
regulator-name = "P1.8V_LDO_OUT2";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo3_reg: LDO3 {
|
|
regulator-name = "P1.8V_LDO_OUT3";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo7_reg: LDO7 {
|
|
regulator-name = "P1.1V_LDO_OUT7";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo8_reg: LDO8 {
|
|
regulator-name = "P1.0V_LDO_OUT8";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo10_reg: LDO10 {
|
|
regulator-name = "P1.8V_LDO_OUT10";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo12_reg: LDO12 {
|
|
regulator-name = "P3.0V_LDO_OUT12";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo14_reg: LDO14 {
|
|
regulator-name = "P1.8V_LDO_OUT14";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo15_reg: LDO15 {
|
|
regulator-name = "P1.0V_LDO_OUT15";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo16_reg: LDO16 {
|
|
regulator-name = "P1.8V_LDO_OUT16";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "vdd_mif";
|
|
regulator-min-microvolt = <950000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "vdd_arm";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck3_reg: BUCK3 {
|
|
regulator-name = "vdd_int";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck4_reg: BUCK4 {
|
|
regulator-name = "vdd_g3d";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck5_reg: BUCK5 {
|
|
regulator-name = "P1.8V_BUCK_OUT5";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck6_reg: BUCK6 {
|
|
regulator-name = "P1.35V_BUCK_OUT6";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck7_reg: BUCK7 {
|
|
regulator-name = "P2.0V_BUCK_OUT7";
|
|
regulator-min-microvolt = <2000000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck8_reg: BUCK8 {
|
|
regulator-name = "P2.85V_BUCK_OUT8";
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c_1 {
|
|
status = "okay";
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <378000>;
|
|
|
|
trackpad@67 {
|
|
reg = <0x67>;
|
|
compatible = "cypress,cyapa";
|
|
interrupts = <2 IRQ_TYPE_NONE>;
|
|
interrupt-parent = <&gpx1>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* Disabled pullups since external part has its own pullups and
|
|
* double-pulling gets us out of spec in some cases.
|
|
*/
|
|
&i2c2_bus {
|
|
samsung,pin-pud = <0>;
|
|
};
|
|
|
|
&i2c_2 {
|
|
status = "okay";
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <66000>;
|
|
|
|
hdmiddc@50 {
|
|
compatible = "samsung,exynos4210-hdmiddc";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
&i2c_3 {
|
|
status = "okay";
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <66000>;
|
|
};
|
|
|
|
&i2c_4 {
|
|
status = "okay";
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <66000>;
|
|
};
|
|
|
|
&i2c_5 {
|
|
status = "okay";
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <66000>;
|
|
};
|
|
|
|
&i2c_7 {
|
|
status = "okay";
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <66000>;
|
|
|
|
ptn3460: lvds-bridge@20 {
|
|
compatible = "nxp,ptn3460";
|
|
reg = <0x20>;
|
|
powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
|
|
edid-emulation = <5>;
|
|
|
|
ports {
|
|
port0 {
|
|
bridge_out: endpoint {
|
|
remote-endpoint = <&panel_in>;
|
|
};
|
|
};
|
|
|
|
port1 {
|
|
bridge_in: endpoint {
|
|
remote-endpoint = <&dp_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c_8 {
|
|
status = "okay";
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <378000>;
|
|
|
|
hdmiphy: hdmiphy@38 {
|
|
compatible = "samsung,exynos4212-hdmiphy";
|
|
reg = <0x38>;
|
|
};
|
|
};
|
|
|
|
&i2s0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc_0 {
|
|
status = "okay";
|
|
num-slots = <1>;
|
|
non-removable;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <2 3>;
|
|
samsung,dw-mshc-ddr-timing = <1 2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
};
|
|
|
|
&mmc_2 {
|
|
status = "okay";
|
|
num-slots = <1>;
|
|
card-detect-delay = <200>;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <2 3>;
|
|
samsung,dw-mshc-ddr-timing = <1 2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
|
|
bus-width = <4>;
|
|
wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
|
|
cap-sd-highspeed;
|
|
};
|
|
|
|
/*
|
|
* On Snow we've got SIP WiFi and so can keep drive strengths low to
|
|
* reduce EMI.
|
|
*/
|
|
&mmc_3 {
|
|
status = "okay";
|
|
num-slots = <1>;
|
|
non-removable;
|
|
cap-sdio-irq;
|
|
keep-power-in-suspend;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <2 3>;
|
|
samsung,dw-mshc-ddr-timing = <1 2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
mmc-pwrseq = <&mmc3_pwrseq>;
|
|
};
|
|
|
|
&pinctrl_0 {
|
|
wifi_en: wifi-en {
|
|
samsung,pins = "gpx0-1";
|
|
samsung,pin-function = <1>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
wifi_rst: wifi-rst {
|
|
samsung,pins = "gpx0-2";
|
|
samsung,pin-function = <1>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
power_key_irq: power-key-irq {
|
|
samsung,pins = "gpx1-3";
|
|
samsung,pin-function = <0xf>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
ec_irq: ec-irq {
|
|
samsung,pins = "gpx1-6";
|
|
samsung,pin-function = <0>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
tps65090_irq: tps65090-irq {
|
|
samsung,pins = "gpx2-6";
|
|
samsung,pin-function = <0>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
usb3_vbus_en: usb3-vbus-en {
|
|
samsung,pins = "gpx2-7";
|
|
samsung,pin-function = <1>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
max77686_irq: max77686-irq {
|
|
samsung,pins = "gpx3-2";
|
|
samsung,pin-function = <0>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
lid_irq: lid-irq {
|
|
samsung,pins = "gpx3-5";
|
|
samsung,pin-function = <0xf>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
hdmi_hpd_irq: hdmi-hpd-irq {
|
|
samsung,pins = "gpx3-7";
|
|
samsung,pin-function = <0>;
|
|
samsung,pin-pud = <1>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
};
|
|
|
|
&pinctrl_1 {
|
|
arb_their_claim: arb-their-claim {
|
|
samsung,pins = "gpe0-4";
|
|
samsung,pin-function = <0>;
|
|
samsung,pin-pud = <3>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
arb_our_claim: arb-our-claim {
|
|
samsung,pins = "gpf0-3";
|
|
samsung,pin-function = <1>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
|
|
clock-names = "rtc", "rtc_src";
|
|
};
|
|
|
|
&sd3_bus4 {
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
&sd3_clk {
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
&sd3_cmd {
|
|
samsung,pin-pud = <3>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
&spi_1 {
|
|
status = "okay";
|
|
samsung,spi-src-clk = <0>;
|
|
num-cs = <1>;
|
|
cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
&usbdrd_dwc3 {
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&usbdrd_phy {
|
|
vbus-supply = <&usb3_vbus_reg>;
|
|
};
|
|
|
|
#include "cros-ec-keyboard.dtsi"
|