mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 06:56:52 +07:00
93fff4ce19
When DT support for kirkwood was first introduced, there was no clock infrastructure. As a result, we had to manually pass the clock-frequency to the driver from the device node. Unfortunately, on kirkwood, with minimal config or all module configs, clock-frequency breaks booting because of_serial doesn't consume the gate_clk when clock-frequency is defined. The end result on kirkwood is that runit gets gated, and then the boot fails when the kernel tries to write to the serial port. Fix the issue by removing the clock-frequency parameter from all kirkwood dts files. Booted on dreamplug without earlyprintk and successfully logged in via ttyS0. Reported-by: Simon Baatz <gmbnomis@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
94 lines
1.8 KiB
Plaintext
94 lines
1.8 KiB
Plaintext
/dts-v1/;
|
|
|
|
/include/ "kirkwood.dtsi"
|
|
/include/ "kirkwood-6281.dtsi"
|
|
|
|
/ {
|
|
model = "Seagate FreeAgent Dockstar";
|
|
compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x8000000>;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
|
|
};
|
|
|
|
ocp@f1000000 {
|
|
pinctrl: pinctrl@10000 {
|
|
|
|
pinctrl-0 = < &pmx_usb_power_enable
|
|
&pmx_led_green &pmx_led_orange >;
|
|
pinctrl-names = "default";
|
|
|
|
pmx_usb_power_enable: pmx-usb-power-enable {
|
|
marvell,pins = "mpp29";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_led_green: pmx-led-green {
|
|
marvell,pins = "mpp46";
|
|
marvell,function = "gpio";
|
|
};
|
|
pmx_led_orange: pmx-led-orange {
|
|
marvell,pins = "mpp47";
|
|
marvell,function = "gpio";
|
|
};
|
|
};
|
|
serial@12000 {
|
|
status = "ok";
|
|
};
|
|
|
|
nand@3000000 {
|
|
status = "okay";
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0000000 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "uImage";
|
|
reg = <0x0100000 0x400000>;
|
|
};
|
|
|
|
partition@500000 {
|
|
label = "data";
|
|
reg = <0x0500000 0xfb00000>;
|
|
};
|
|
};
|
|
};
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
|
|
health {
|
|
label = "status:green:health";
|
|
gpios = <&gpio1 14 1>;
|
|
linux,default-trigger = "default-on";
|
|
};
|
|
fault {
|
|
label = "status:orange:fault";
|
|
gpios = <&gpio1 15 1>;
|
|
};
|
|
};
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
usb_power: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
regulator-name = "USB Power";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpio = <&gpio0 29 0>;
|
|
};
|
|
};
|
|
};
|