mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-22 21:47:04 +07:00
475be4d85a
isdn source code uses a not-current coding style. Update the coding style used on a per-line basis so that git diff -w shows only elided blank lines at EOF. Done with emacs and some scripts and some typing. Built x86 allyesconfig. No detected change in objdump -d or size. Signed-off-by: Joe Perches <joe@perches.com>
347 lines
15 KiB
C
347 lines
15 KiB
C
|
|
/*
|
|
*
|
|
Copyright (c) Eicon Networks, 2002.
|
|
*
|
|
This source file is supplied for the use with
|
|
Eicon Networks range of DIVA Server Adapters.
|
|
*
|
|
Eicon File Revision : 2.1
|
|
*
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2, or (at your option)
|
|
any later version.
|
|
*
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING ANY
|
|
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
See the GNU General Public License for more details.
|
|
*
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*/
|
|
#ifndef __EICON_MDM_MSG_H__
|
|
#define __EICON_MDM_MSG_H__
|
|
#define DSP_UDATA_INDICATION_DCD_OFF 0x01
|
|
#define DSP_UDATA_INDICATION_DCD_ON 0x02
|
|
#define DSP_UDATA_INDICATION_CTS_OFF 0x03
|
|
#define DSP_UDATA_INDICATION_CTS_ON 0x04
|
|
/* =====================================================================
|
|
DCD_OFF Message:
|
|
<word> time of DCD off (sampled from counter at 8kHz)
|
|
DCD_ON Message:
|
|
<word> time of DCD on (sampled from counter at 8kHz)
|
|
<byte> connected norm
|
|
<word> connected options
|
|
<dword> connected speed (bit/s, max of tx and rx speed)
|
|
<word> roundtrip delay (ms)
|
|
<dword> connected speed tx (bit/s)
|
|
<dword> connected speed rx (bit/s)
|
|
Size of this message == 19 bytes, but we will receive only 11
|
|
===================================================================== */
|
|
#define DSP_CONNECTED_NORM_UNSPECIFIED 0
|
|
#define DSP_CONNECTED_NORM_V21 1
|
|
#define DSP_CONNECTED_NORM_V23 2
|
|
#define DSP_CONNECTED_NORM_V22 3
|
|
#define DSP_CONNECTED_NORM_V22_BIS 4
|
|
#define DSP_CONNECTED_NORM_V32_BIS 5
|
|
#define DSP_CONNECTED_NORM_V34 6
|
|
#define DSP_CONNECTED_NORM_V8 7
|
|
#define DSP_CONNECTED_NORM_BELL_212A 8
|
|
#define DSP_CONNECTED_NORM_BELL_103 9
|
|
#define DSP_CONNECTED_NORM_V29_LEASED_LINE 10
|
|
#define DSP_CONNECTED_NORM_V33_LEASED_LINE 11
|
|
#define DSP_CONNECTED_NORM_V90 12
|
|
#define DSP_CONNECTED_NORM_V21_CH2 13
|
|
#define DSP_CONNECTED_NORM_V27_TER 14
|
|
#define DSP_CONNECTED_NORM_V29 15
|
|
#define DSP_CONNECTED_NORM_V33 16
|
|
#define DSP_CONNECTED_NORM_V17 17
|
|
#define DSP_CONNECTED_NORM_V32 18
|
|
#define DSP_CONNECTED_NORM_K56_FLEX 19
|
|
#define DSP_CONNECTED_NORM_X2 20
|
|
#define DSP_CONNECTED_NORM_V18 21
|
|
#define DSP_CONNECTED_NORM_V18_LOW_HIGH 22
|
|
#define DSP_CONNECTED_NORM_V18_HIGH_LOW 23
|
|
#define DSP_CONNECTED_NORM_V21_LOW_HIGH 24
|
|
#define DSP_CONNECTED_NORM_V21_HIGH_LOW 25
|
|
#define DSP_CONNECTED_NORM_BELL103_LOW_HIGH 26
|
|
#define DSP_CONNECTED_NORM_BELL103_HIGH_LOW 27
|
|
#define DSP_CONNECTED_NORM_V23_75_1200 28
|
|
#define DSP_CONNECTED_NORM_V23_1200_75 29
|
|
#define DSP_CONNECTED_NORM_EDT_110 30
|
|
#define DSP_CONNECTED_NORM_BAUDOT_45 31
|
|
#define DSP_CONNECTED_NORM_BAUDOT_47 32
|
|
#define DSP_CONNECTED_NORM_BAUDOT_50 33
|
|
#define DSP_CONNECTED_NORM_DTMF 34
|
|
#define DSP_CONNECTED_NORM_V18_RESERVED_13 35
|
|
#define DSP_CONNECTED_NORM_V18_RESERVED_14 36
|
|
#define DSP_CONNECTED_NORM_V18_RESERVED_15 37
|
|
#define DSP_CONNECTED_NORM_VOWN 38
|
|
#define DSP_CONNECTED_NORM_V23_OFF_HOOK 39
|
|
#define DSP_CONNECTED_NORM_V23_ON_HOOK 40
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_3 41
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_4 42
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_5 43
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_6 44
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_7 45
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_8 46
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_9 47
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_10 48
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_11 49
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_12 50
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_13 51
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_14 52
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_15 53
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_16 54
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_17 55
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_18 56
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_19 57
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_20 58
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_21 59
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_22 60
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_23 61
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_24 62
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_25 63
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_26 64
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_27 65
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_28 66
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_29 67
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_30 68
|
|
#define DSP_CONNECTED_NORM_VOWN_RESERVED_31 69
|
|
#define DSP_CONNECTED_OPTION_TRELLIS 0x0001
|
|
#define DSP_CONNECTED_OPTION_V42_TRANS 0x0002
|
|
#define DSP_CONNECTED_OPTION_V42_LAPM 0x0004
|
|
#define DSP_CONNECTED_OPTION_SHORT_TRAIN 0x0008
|
|
#define DSP_CONNECTED_OPTION_TALKER_ECHO_PROTECT 0x0010
|
|
#define DSP_CONNECTED_OPTION_V42BIS 0x0020
|
|
#define DSP_CONNECTED_OPTION_MNP2 0x0040
|
|
#define DSP_CONNECTED_OPTION_MNP3 0x0080
|
|
#define DSP_CONNECTED_OPTION_MNP4 0x00c0
|
|
#define DSP_CONNECTED_OPTION_MNP5 0x0100
|
|
#define DSP_CONNECTED_OPTION_MNP10 0x0200
|
|
#define DSP_CONNECTED_OPTION_MASK_V42 0x0024
|
|
#define DSP_CONNECTED_OPTION_MASK_MNP 0x03c0
|
|
#define DSP_CONNECTED_OPTION_MASK_ERROR_CORRECT 0x03e4
|
|
#define DSP_CONNECTED_OPTION_MASK_COMPRESSION 0x0320
|
|
#define DSP_UDATA_INDICATION_DISCONNECT 5
|
|
/*
|
|
returns:
|
|
<byte> cause
|
|
*/
|
|
/* ==========================================================
|
|
DLC: B2 modem configuration
|
|
========================================================== */
|
|
/*
|
|
Fields in assign DLC information element for modem protocol V.42/MNP:
|
|
<byte> length of information element
|
|
<word> information field length
|
|
<byte> address A (not used, default 3)
|
|
<byte> address B (not used, default 1)
|
|
<byte> modulo mode (not used, default 7)
|
|
<byte> window size (not used, default 7)
|
|
<word> XID length (not used, default 0)
|
|
... XID information (not used, default empty)
|
|
<byte> modem protocol negotiation options
|
|
<byte> modem protocol options
|
|
<byte> modem protocol break configuration
|
|
<byte> modem protocol application options
|
|
*/
|
|
#define DLC_MODEMPROT_DISABLE_V42_V42BIS 0x01
|
|
#define DLC_MODEMPROT_DISABLE_MNP_MNP5 0x02
|
|
#define DLC_MODEMPROT_REQUIRE_PROTOCOL 0x04
|
|
#define DLC_MODEMPROT_DISABLE_V42_DETECT 0x08
|
|
#define DLC_MODEMPROT_DISABLE_COMPRESSION 0x10
|
|
#define DLC_MODEMPROT_REQUIRE_PROTOCOL_V34UP 0x20
|
|
#define DLC_MODEMPROT_NO_PROTOCOL_IF_1200 0x01
|
|
#define DLC_MODEMPROT_BUFFER_IN_V42_DETECT 0x02
|
|
#define DLC_MODEMPROT_DISABLE_V42_SREJ 0x04
|
|
#define DLC_MODEMPROT_DISABLE_MNP3 0x08
|
|
#define DLC_MODEMPROT_DISABLE_MNP4 0x10
|
|
#define DLC_MODEMPROT_DISABLE_MNP10 0x20
|
|
#define DLC_MODEMPROT_NO_PROTOCOL_IF_V22BIS 0x40
|
|
#define DLC_MODEMPROT_NO_PROTOCOL_IF_V32BIS 0x80
|
|
#define DLC_MODEMPROT_BREAK_DISABLED 0x00
|
|
#define DLC_MODEMPROT_BREAK_NORMAL 0x01
|
|
#define DLC_MODEMPROT_BREAK_EXPEDITED 0x02
|
|
#define DLC_MODEMPROT_BREAK_DESTRUCTIVE 0x03
|
|
#define DLC_MODEMPROT_BREAK_CONFIG_MASK 0x03
|
|
#define DLC_MODEMPROT_APPL_EARLY_CONNECT 0x01
|
|
#define DLC_MODEMPROT_APPL_PASS_INDICATIONS 0x02
|
|
/* ==========================================================
|
|
CAI parameters used for the modem L1 configuration
|
|
========================================================== */
|
|
/*
|
|
Fields in assign CAI information element:
|
|
<byte> length of information element
|
|
<byte> info field and B-channel hardware
|
|
<byte> rate adaptation bit rate
|
|
<byte> async framing parameters
|
|
<byte> reserved
|
|
<word> packet length
|
|
<byte> modem line taking options
|
|
<byte> modem modulation negotiation parameters
|
|
<byte> modem modulation options
|
|
<byte> modem disabled modulations mask low
|
|
<byte> modem disabled modulations mask high
|
|
<byte> modem enabled modulations mask
|
|
<word> modem min TX speed
|
|
<word> modem max TX speed
|
|
<word> modem min RX speed
|
|
<word> modem max RX speed
|
|
<byte> modem disabled symbol rates mask
|
|
<byte> modem info options mask
|
|
<byte> modem transmit level adjust
|
|
<byte> modem speaker parameters
|
|
<word> modem private debug config
|
|
<struct> modem reserved
|
|
<struct> v18 config parameters
|
|
<struct> v18 probing sequence
|
|
<struct> v18 probing message
|
|
*/
|
|
#define DSP_CAI_HARDWARE_HDLC_64K 0x05
|
|
#define DSP_CAI_HARDWARE_HDLC_56K 0x08
|
|
#define DSP_CAI_HARDWARE_TRANSP 0x09
|
|
#define DSP_CAI_HARDWARE_V110_SYNC 0x0c
|
|
#define DSP_CAI_HARDWARE_V110_ASYNC 0x0d
|
|
#define DSP_CAI_HARDWARE_HDLC_128K 0x0f
|
|
#define DSP_CAI_HARDWARE_FAX 0x10
|
|
#define DSP_CAI_HARDWARE_MODEM_ASYNC 0x11
|
|
#define DSP_CAI_HARDWARE_MODEM_SYNC 0x12
|
|
#define DSP_CAI_HARDWARE_V110_HDLCA 0x13
|
|
#define DSP_CAI_HARDWARE_ADVANCED_VOICE 0x14
|
|
#define DSP_CAI_HARDWARE_TRANSP_DTMF 0x16
|
|
#define DSP_CAI_HARDWARE_DTMF_VOICE_ISDN 0x17
|
|
#define DSP_CAI_HARDWARE_DTMF_VOICE_LOCAL 0x18
|
|
#define DSP_CAI_HARDWARE_MASK 0x3f
|
|
#define DSP_CAI_ENABLE_INFO_INDICATIONS 0x80
|
|
#define DSP_CAI_RATE_ADAPTATION_300 0x00
|
|
#define DSP_CAI_RATE_ADAPTATION_600 0x01
|
|
#define DSP_CAI_RATE_ADAPTATION_1200 0x02
|
|
#define DSP_CAI_RATE_ADAPTATION_2400 0x03
|
|
#define DSP_CAI_RATE_ADAPTATION_4800 0x04
|
|
#define DSP_CAI_RATE_ADAPTATION_9600 0x05
|
|
#define DSP_CAI_RATE_ADAPTATION_19200 0x06
|
|
#define DSP_CAI_RATE_ADAPTATION_38400 0x07
|
|
#define DSP_CAI_RATE_ADAPTATION_48000 0x08
|
|
#define DSP_CAI_RATE_ADAPTATION_56000 0x09
|
|
#define DSP_CAI_RATE_ADAPTATION_7200 0x0a
|
|
#define DSP_CAI_RATE_ADAPTATION_14400 0x0b
|
|
#define DSP_CAI_RATE_ADAPTATION_28800 0x0c
|
|
#define DSP_CAI_RATE_ADAPTATION_12000 0x0d
|
|
#define DSP_CAI_RATE_ADAPTATION_1200_75 0x0e
|
|
#define DSP_CAI_RATE_ADAPTATION_75_1200 0x0f
|
|
#define DSP_CAI_RATE_ADAPTATION_MASK 0x0f
|
|
#define DSP_CAI_ASYNC_PARITY_ENABLE 0x01
|
|
#define DSP_CAI_ASYNC_PARITY_SPACE 0x00
|
|
#define DSP_CAI_ASYNC_PARITY_ODD 0x02
|
|
#define DSP_CAI_ASYNC_PARITY_EVEN 0x04
|
|
#define DSP_CAI_ASYNC_PARITY_MARK 0x06
|
|
#define DSP_CAI_ASYNC_PARITY_MASK 0x06
|
|
#define DSP_CAI_ASYNC_ONE_STOP_BIT 0x00
|
|
#define DSP_CAI_ASYNC_TWO_STOP_BITS 0x20
|
|
#define DSP_CAI_ASYNC_CHAR_LENGTH_8 0x00
|
|
#define DSP_CAI_ASYNC_CHAR_LENGTH_7 0x40
|
|
#define DSP_CAI_ASYNC_CHAR_LENGTH_6 0x80
|
|
#define DSP_CAI_ASYNC_CHAR_LENGTH_5 0xc0
|
|
#define DSP_CAI_ASYNC_CHAR_LENGTH_MASK 0xc0
|
|
#define DSP_CAI_MODEM_LEASED_LINE_MODE 0x01
|
|
#define DSP_CAI_MODEM_4_WIRE_OPERATION 0x02
|
|
#define DSP_CAI_MODEM_DISABLE_BUSY_DETECT 0x04
|
|
#define DSP_CAI_MODEM_DISABLE_CALLING_TONE 0x08
|
|
#define DSP_CAI_MODEM_DISABLE_ANSWER_TONE 0x10
|
|
#define DSP_CAI_MODEM_ENABLE_DIAL_TONE_DET 0x20
|
|
#define DSP_CAI_MODEM_USE_POTS_INTERFACE 0x40
|
|
#define DSP_CAI_MODEM_FORCE_RAY_TAYLOR_FAX 0x80
|
|
#define DSP_CAI_MODEM_NEGOTIATE_HIGHEST 0x00
|
|
#define DSP_CAI_MODEM_NEGOTIATE_DISABLED 0x01
|
|
#define DSP_CAI_MODEM_NEGOTIATE_IN_CLASS 0x02
|
|
#define DSP_CAI_MODEM_NEGOTIATE_V100 0x03
|
|
#define DSP_CAI_MODEM_NEGOTIATE_V8 0x04
|
|
#define DSP_CAI_MODEM_NEGOTIATE_V8BIS 0x05
|
|
#define DSP_CAI_MODEM_NEGOTIATE_MASK 0x07
|
|
#define DSP_CAI_MODEM_GUARD_TONE_NONE 0x00
|
|
#define DSP_CAI_MODEM_GUARD_TONE_550HZ 0x40
|
|
#define DSP_CAI_MODEM_GUARD_TONE_1800HZ 0x80
|
|
#define DSP_CAI_MODEM_GUARD_TONE_MASK 0xc0
|
|
#define DSP_CAI_MODEM_DISABLE_RETRAIN 0x01
|
|
#define DSP_CAI_MODEM_DISABLE_STEPUPDOWN 0x02
|
|
#define DSP_CAI_MODEM_DISABLE_SPLIT_SPEED 0x04
|
|
#define DSP_CAI_MODEM_DISABLE_TRELLIS 0x08
|
|
#define DSP_CAI_MODEM_ALLOW_RDL_TEST_LOOP 0x10
|
|
#define DSP_CAI_MODEM_DISABLE_FLUSH_TIMER 0x40
|
|
#define DSP_CAI_MODEM_REVERSE_DIRECTION 0x80
|
|
#define DSP_CAI_MODEM_DISABLE_V21 0x01
|
|
#define DSP_CAI_MODEM_DISABLE_V23 0x02
|
|
#define DSP_CAI_MODEM_DISABLE_V22 0x04
|
|
#define DSP_CAI_MODEM_DISABLE_V22BIS 0x08
|
|
#define DSP_CAI_MODEM_DISABLE_V32 0x10
|
|
#define DSP_CAI_MODEM_DISABLE_V32BIS 0x20
|
|
#define DSP_CAI_MODEM_DISABLE_V34 0x40
|
|
#define DSP_CAI_MODEM_DISABLE_V90 0x80
|
|
#define DSP_CAI_MODEM_DISABLE_BELL103 0x01
|
|
#define DSP_CAI_MODEM_DISABLE_BELL212A 0x02
|
|
#define DSP_CAI_MODEM_DISABLE_VFC 0x04
|
|
#define DSP_CAI_MODEM_DISABLE_K56FLEX 0x08
|
|
#define DSP_CAI_MODEM_DISABLE_X2 0x10
|
|
#define DSP_CAI_MODEM_ENABLE_V29FDX 0x01
|
|
#define DSP_CAI_MODEM_ENABLE_V33 0x02
|
|
#define DSP_CAI_MODEM_DISABLE_2400_SYMBOLS 0x01
|
|
#define DSP_CAI_MODEM_DISABLE_2743_SYMBOLS 0x02
|
|
#define DSP_CAI_MODEM_DISABLE_2800_SYMBOLS 0x04
|
|
#define DSP_CAI_MODEM_DISABLE_3000_SYMBOLS 0x08
|
|
#define DSP_CAI_MODEM_DISABLE_3200_SYMBOLS 0x10
|
|
#define DSP_CAI_MODEM_DISABLE_3429_SYMBOLS 0x20
|
|
#define DSP_CAI_MODEM_DISABLE_TX_REDUCTION 0x01
|
|
#define DSP_CAI_MODEM_DISABLE_PRECODING 0x02
|
|
#define DSP_CAI_MODEM_DISABLE_PREEMPHASIS 0x04
|
|
#define DSP_CAI_MODEM_DISABLE_SHAPING 0x08
|
|
#define DSP_CAI_MODEM_DISABLE_NONLINEAR_EN 0x10
|
|
#define DSP_CAI_MODEM_SPEAKER_OFF 0x00
|
|
#define DSP_CAI_MODEM_SPEAKER_DURING_TRAIN 0x01
|
|
#define DSP_CAI_MODEM_SPEAKER_TIL_CONNECT 0x02
|
|
#define DSP_CAI_MODEM_SPEAKER_ALWAYS_ON 0x03
|
|
#define DSP_CAI_MODEM_SPEAKER_CONTROL_MASK 0x03
|
|
#define DSP_CAI_MODEM_SPEAKER_VOLUME_MIN 0x00
|
|
#define DSP_CAI_MODEM_SPEAKER_VOLUME_LOW 0x04
|
|
#define DSP_CAI_MODEM_SPEAKER_VOLUME_HIGH 0x08
|
|
#define DSP_CAI_MODEM_SPEAKER_VOLUME_MAX 0x0c
|
|
#define DSP_CAI_MODEM_SPEAKER_VOLUME_MASK 0x0c
|
|
/* ==========================================================
|
|
DCD/CTS State
|
|
========================================================== */
|
|
#define MDM_WANT_CONNECT_B3_ACTIVE_I 0x01
|
|
#define MDM_NCPI_VALID 0x02
|
|
#define MDM_NCPI_CTS_ON_RECEIVED 0x04
|
|
#define MDM_NCPI_DCD_ON_RECEIVED 0x08
|
|
/* ==========================================================
|
|
CAPI NCPI Constants
|
|
========================================================== */
|
|
#define MDM_NCPI_ECM_V42 0x0001
|
|
#define MDM_NCPI_ECM_MNP 0x0002
|
|
#define MDM_NCPI_TRANSPARENT 0x0004
|
|
#define MDM_NCPI_COMPRESSED 0x0010
|
|
/* ==========================================================
|
|
CAPI B2 Config Constants
|
|
========================================================== */
|
|
#define MDM_B2_DISABLE_V42bis 0x0001
|
|
#define MDM_B2_DISABLE_MNP 0x0002
|
|
#define MDM_B2_DISABLE_TRANS 0x0004
|
|
#define MDM_B2_DISABLE_V42 0x0008
|
|
#define MDM_B2_DISABLE_COMP 0x0010
|
|
/* ==========================================================
|
|
CAPI B1 Config Constants
|
|
========================================================== */
|
|
#define MDM_CAPI_DISABLE_RETRAIN 0x0001
|
|
#define MDM_CAPI_DISABLE_RING_TONE 0x0002
|
|
#define MDM_CAPI_GUARD_1800 0x0004
|
|
#define MDM_CAPI_GUARD_550 0x0008
|
|
#define MDM_CAPI_NEG_V8 0x0003
|
|
#define MDM_CAPI_NEG_V100 0x0002
|
|
#define MDM_CAPI_NEG_MOD_CLASS 0x0001
|
|
#define MDM_CAPI_NEG_DISABLED 0x0000
|
|
#endif
|