mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 18:35:26 +07:00
da94a82930
In August 2012, Matthew Gretton-Dann checked a change into binutils
labelled "Error on obsolete & warn on deprecated registers", apparently as
part of ARMv8 support. Apparently, this was supposed to emit the message
"Warning: This coprocessor register access is deprecated in ARMv8" when
using certain mcr/mrc instructions and building for ARMv8. Unfortunately,
the message that is actually emitted appears to be '(null)', which is
less helpful in comparison.
Even more unfortunately, this is biting us on every single kernel
build with a new gas, because arch/arm/boot/compressed/head.S and some
other files in that directory are built with -march=all since kernel
commit 80cec14a8 "[ARM] Add -march=all to assembly file build in
arch/arm/boot/compressed" back in v2.6.28.
This patch reverts Russell's nice solution and instead marks the head.S
file to be built for armv7-a, which fortunately lets us build all
instructions in that file without warnings even on the broken binutils.
Without this patch, building anything results in:
arch/arm/boot/compressed/head.S: Assembler messages:
arch/arm/boot/compressed/head.S:565: Warning: (null)
arch/arm/boot/compressed/head.S:676: Warning: (null)
arch/arm/boot/compressed/head.S:698: Warning: (null)
arch/arm/boot/compressed/head.S:722: Warning: (null)
arch/arm/boot/compressed/head.S:726: Warning: (null)
arch/arm/boot/compressed/head.S:957: Warning: (null)
arch/arm/boot/compressed/head.S:996: Warning: (null)
arch/arm/boot/compressed/head.S:997: Warning: (null)
arch/arm/boot/compressed/head.S:1027: Warning: (null)
arch/arm/boot/compressed/head.S:1035: Warning: (null)
arch/arm/boot/compressed/head.S:1046: Warning: (null)
arch/arm/boot/compressed/head.S:1060: Warning: (null)
arch/arm/boot/compressed/head.S:1092: Warning: (null)
arch/arm/boot/compressed/head.S:1094: Warning: (null)
arch/arm/boot/compressed/head.S:1095: Warning: (null)
arch/arm/boot/compressed/head.S:1102: Warning: (null)
arch/arm/boot/compressed/head.S:1134: Warning: (null)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Cc: Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
141 lines
3.5 KiB
ArmAsm
141 lines
3.5 KiB
ArmAsm
/* The head-file for the Shark
|
|
* by Alexander Schulz
|
|
*
|
|
* Does the following:
|
|
* - get the memory layout from firmware. This can only be done as long as the mmu
|
|
* is still on.
|
|
* - switch the mmu off, so we have physical addresses
|
|
* - copy the kernel to 0x08508000. This is done to have a fixed address where the
|
|
* C-parts (misc.c) are executed. This address must be known at compile-time,
|
|
* but the load-address of the kernel depends on how much memory is installed.
|
|
* - Jump to this location.
|
|
* - Set r8 with 0, r7 with the architecture ID for head.S
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
|
|
#include <asm/assembler.h>
|
|
|
|
.section ".start", "ax"
|
|
|
|
.arch armv4
|
|
b __beginning
|
|
|
|
__ofw_data: .long 0 @ the number of memory blocks
|
|
.space 128 @ (startaddr,size) ...
|
|
.space 128 @ bootargs
|
|
.align
|
|
|
|
__beginning: mov r4, r0 @ save the entry to the firmware
|
|
|
|
mov r0, #0xC0 @ disable irq and fiq
|
|
mov r1, r0
|
|
mrs r3, cpsr
|
|
bic r2, r3, r0
|
|
eor r2, r2, r1
|
|
msr cpsr_c, r2
|
|
|
|
mov r0, r4 @ get the Memory layout from firmware
|
|
adr r1, __ofw_data
|
|
add r2, r1, #4
|
|
mov lr, pc
|
|
b ofw_init
|
|
mov r1, #0
|
|
|
|
adr r2, __mmu_off @ calculate physical address
|
|
sub r2, r2, #0xf0000000 @ openprom maps us at f000 virt, 0e50 phys
|
|
adr r0, __ofw_data
|
|
ldr r0, [r0, #4]
|
|
add r2, r2, r0
|
|
add r2, r2, #0x00500000
|
|
|
|
mrc p15, 0, r3, c1, c0
|
|
bic r3, r3, #0xC @ Write Buffer and DCache
|
|
bic r3, r3, #0x1000 @ ICache
|
|
mcr p15, 0, r3, c1, c0 @ disabled
|
|
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c7 @ flush I,D caches on v4
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
|
|
mcr p15, 0, r0, c8, c7 @ flush I,D TLBs on v4
|
|
|
|
bic r3, r3, #0x1 @ MMU
|
|
mcr p15, 0, r3, c1, c0 @ disabled
|
|
|
|
mov pc, r2
|
|
|
|
__copy_target: .long 0x08507FFC
|
|
__copy_end: .long 0x08607FFC
|
|
|
|
.word _start
|
|
.word __bss_start
|
|
|
|
.align
|
|
__temp_stack: .space 128
|
|
|
|
__mmu_off:
|
|
adr r0, __ofw_data @ read the 1. entry of the memory map
|
|
ldr r0, [r0, #4]
|
|
orr r0, r0, #0x00600000
|
|
sub r0, r0, #4
|
|
|
|
ldr r1, __copy_end
|
|
ldr r3, __copy_target
|
|
|
|
/* r0 = 0x0e600000 (current end of kernelcode)
|
|
* r3 = 0x08508000 (where it should begin)
|
|
* r1 = 0x08608000 (end of copying area, 1MB)
|
|
* The kernel is compressed, so 1 MB should be enough.
|
|
* copy the kernel to the beginning of physical memory
|
|
* We start from the highest address, so we can copy
|
|
* from 0x08500000 to 0x08508000 if we have only 8MB
|
|
*/
|
|
|
|
/* As we get more 2.6-kernels it gets more and more
|
|
* uncomfortable to be bound to kernel images of 1MB only.
|
|
* So we add a loop here, to be able to copy some more.
|
|
* Alexander Schulz 2005-07-17
|
|
*/
|
|
|
|
mov r4, #3 @ How many megabytes to copy
|
|
|
|
|
|
__MoveCode: sub r4, r4, #1
|
|
|
|
__Copy: ldr r2, [r0], #-4
|
|
str r2, [r1], #-4
|
|
teq r1, r3
|
|
bne __Copy
|
|
|
|
/* The firmware maps us in blocks of 1 MB, the next block is
|
|
_below_ the last one. So our decrementing source pointer
|
|
ist right here, but the destination pointer must be increased
|
|
by 2 MB */
|
|
add r1, r1, #0x00200000
|
|
add r3, r3, #0x00100000
|
|
|
|
teq r4, #0
|
|
bne __MoveCode
|
|
|
|
|
|
/* and jump to it */
|
|
adr r2, __go_on @ where we want to jump
|
|
adr r0, __ofw_data @ read the 1. entry of the memory map
|
|
ldr r0, [r0, #4]
|
|
sub r2, r2, r0 @ we are mapped add 0e50 now, sub that (-0e00)
|
|
sub r2, r2, #0x00500000 @ -0050
|
|
ldr r0, __copy_target @ and add 0850 8000 instead
|
|
add r0, r0, #4
|
|
add r2, r2, r0
|
|
mov pc, r2 @ and jump there
|
|
|
|
__go_on:
|
|
adr sp, __temp_stack
|
|
add sp, sp, #128
|
|
adr r0, __ofw_data
|
|
mov lr, pc
|
|
b create_params
|
|
|
|
mov r8, #0
|
|
mov r7, #15
|