linux_dsm_epyc7002/arch/x86/kernel/smp.c
Seiji Aguchi eddc0e922a x86, trace: Introduce entering/exiting_irq()
When implementing tracepoints in interrupt handers, if the tracepoints are
simply added in the performance sensitive path of interrupt handers,
it may cause potential performance problem due to the time penalty.

To solve the problem, an idea is to prepare non-trace/trace irq handers and
switch their IDTs at the enabling/disabling time.

So, let's introduce entering_irq()/exiting_irq() for pre/post-
processing of each irq handler.

A way to use them is as follows.

Non-trace irq handler:
smp_irq_handler()
{
	entering_irq();		/* pre-processing of this handler */
	__smp_irq_handler();	/*
				 * common logic between non-trace and trace handlers
				 * in a vector.
				 */
	exiting_irq();		/* post-processing of this handler */

}

Trace irq_handler:
smp_trace_irq_handler()
{
	entering_irq();		/* pre-processing of this handler */
	trace_irq_entry();	/* tracepoint for irq entry */
	__smp_irq_handler();	/*
				 * common logic between non-trace and trace handlers
				 * in a vector.
				 */
	trace_irq_exit();	/* tracepoint for irq exit */
	exiting_irq();		/* post-processing of this handler */

}

If tracepoints can place outside entering_irq()/exiting_irq() as follows,
it looks cleaner.

smp_trace_irq_handler()
{
	trace_irq_entry();
	smp_irq_handler();
	trace_irq_exit();
}

But it doesn't work.
The problem is with irq_enter/exit() being called. They must be called before
trace_irq_enter/exit(),  because of the rcu_irq_enter() must be called before
any tracepoints are used, as tracepoints use  rcu to synchronize.

As a possible alternative, we may be able to call irq_enter() first as follows
if irq_enter() can nest.

smp_trace_irq_hander()
{
	irq_entry();
	trace_irq_entry();
	smp_irq_handler();
	trace_irq_exit();
	irq_exit();
}

But it doesn't work, either.
If irq_enter() is nested, it may have a time penalty because it has to check if it
was already called or not. The time penalty is not desired in performance sensitive
paths even if it is tiny.

Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/51C3238D.9040706@hds.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
2013-06-20 22:25:01 -07:00

324 lines
8.7 KiB
C

/*
* Intel SMP support routines.
*
* (c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk>
* (c) 1998-99, 2000, 2009 Ingo Molnar <mingo@redhat.com>
* (c) 2002,2003 Andi Kleen, SuSE Labs.
*
* i386 and x86_64 integration by Glauber Costa <gcosta@redhat.com>
*
* This code is released under the GNU General Public License version 2 or
* later.
*/
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/export.h>
#include <linux/kernel_stat.h>
#include <linux/mc146818rtc.h>
#include <linux/cache.h>
#include <linux/interrupt.h>
#include <linux/cpu.h>
#include <linux/gfp.h>
#include <asm/mtrr.h>
#include <asm/tlbflush.h>
#include <asm/mmu_context.h>
#include <asm/proto.h>
#include <asm/apic.h>
#include <asm/nmi.h>
/*
* Some notes on x86 processor bugs affecting SMP operation:
*
* Pentium, Pentium Pro, II, III (and all CPUs) have bugs.
* The Linux implications for SMP are handled as follows:
*
* Pentium III / [Xeon]
* None of the E1AP-E3AP errata are visible to the user.
*
* E1AP. see PII A1AP
* E2AP. see PII A2AP
* E3AP. see PII A3AP
*
* Pentium II / [Xeon]
* None of the A1AP-A3AP errata are visible to the user.
*
* A1AP. see PPro 1AP
* A2AP. see PPro 2AP
* A3AP. see PPro 7AP
*
* Pentium Pro
* None of 1AP-9AP errata are visible to the normal user,
* except occasional delivery of 'spurious interrupt' as trap #15.
* This is very rare and a non-problem.
*
* 1AP. Linux maps APIC as non-cacheable
* 2AP. worked around in hardware
* 3AP. fixed in C0 and above steppings microcode update.
* Linux does not use excessive STARTUP_IPIs.
* 4AP. worked around in hardware
* 5AP. symmetric IO mode (normal Linux operation) not affected.
* 'noapic' mode has vector 0xf filled out properly.
* 6AP. 'noapic' mode might be affected - fixed in later steppings
* 7AP. We do not assume writes to the LVT deassering IRQs
* 8AP. We do not enable low power mode (deep sleep) during MP bootup
* 9AP. We do not use mixed mode
*
* Pentium
* There is a marginal case where REP MOVS on 100MHz SMP
* machines with B stepping processors can fail. XXX should provide
* an L1cache=Writethrough or L1cache=off option.
*
* B stepping CPUs may hang. There are hardware work arounds
* for this. We warn about it in case your board doesn't have the work
* arounds. Basically that's so I can tell anyone with a B stepping
* CPU and SMP problems "tough".
*
* Specific items [From Pentium Processor Specification Update]
*
* 1AP. Linux doesn't use remote read
* 2AP. Linux doesn't trust APIC errors
* 3AP. We work around this
* 4AP. Linux never generated 3 interrupts of the same priority
* to cause a lost local interrupt.
* 5AP. Remote read is never used
* 6AP. not affected - worked around in hardware
* 7AP. not affected - worked around in hardware
* 8AP. worked around in hardware - we get explicit CS errors if not
* 9AP. only 'noapic' mode affected. Might generate spurious
* interrupts, we log only the first one and count the
* rest silently.
* 10AP. not affected - worked around in hardware
* 11AP. Linux reads the APIC between writes to avoid this, as per
* the documentation. Make sure you preserve this as it affects
* the C stepping chips too.
* 12AP. not affected - worked around in hardware
* 13AP. not affected - worked around in hardware
* 14AP. we always deassert INIT during bootup
* 15AP. not affected - worked around in hardware
* 16AP. not affected - worked around in hardware
* 17AP. not affected - worked around in hardware
* 18AP. not affected - worked around in hardware
* 19AP. not affected - worked around in BIOS
*
* If this sounds worrying believe me these bugs are either ___RARE___,
* or are signal timing bugs worked around in hardware and there's
* about nothing of note with C stepping upwards.
*/
static atomic_t stopping_cpu = ATOMIC_INIT(-1);
static bool smp_no_nmi_ipi = false;
/*
* this function sends a 'reschedule' IPI to another CPU.
* it goes straight through and wastes no time serializing
* anything. Worst case is that we lose a reschedule ...
*/
static void native_smp_send_reschedule(int cpu)
{
if (unlikely(cpu_is_offline(cpu))) {
WARN_ON(1);
return;
}
apic->send_IPI_mask(cpumask_of(cpu), RESCHEDULE_VECTOR);
}
void native_send_call_func_single_ipi(int cpu)
{
apic->send_IPI_mask(cpumask_of(cpu), CALL_FUNCTION_SINGLE_VECTOR);
}
void native_send_call_func_ipi(const struct cpumask *mask)
{
cpumask_var_t allbutself;
if (!alloc_cpumask_var(&allbutself, GFP_ATOMIC)) {
apic->send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
return;
}
cpumask_copy(allbutself, cpu_online_mask);
cpumask_clear_cpu(smp_processor_id(), allbutself);
if (cpumask_equal(mask, allbutself) &&
cpumask_equal(cpu_online_mask, cpu_callout_mask))
apic->send_IPI_allbutself(CALL_FUNCTION_VECTOR);
else
apic->send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
free_cpumask_var(allbutself);
}
static int smp_stop_nmi_callback(unsigned int val, struct pt_regs *regs)
{
/* We are registered on stopping cpu too, avoid spurious NMI */
if (raw_smp_processor_id() == atomic_read(&stopping_cpu))
return NMI_HANDLED;
stop_this_cpu(NULL);
return NMI_HANDLED;
}
/*
* this function calls the 'stop' function on all other CPUs in the system.
*/
asmlinkage void smp_reboot_interrupt(void)
{
ack_APIC_irq();
irq_enter();
stop_this_cpu(NULL);
irq_exit();
}
static void native_stop_other_cpus(int wait)
{
unsigned long flags;
unsigned long timeout;
if (reboot_force)
return;
/*
* Use an own vector here because smp_call_function
* does lots of things not suitable in a panic situation.
*/
/*
* We start by using the REBOOT_VECTOR irq.
* The irq is treated as a sync point to allow critical
* regions of code on other cpus to release their spin locks
* and re-enable irqs. Jumping straight to an NMI might
* accidentally cause deadlocks with further shutdown/panic
* code. By syncing, we give the cpus up to one second to
* finish their work before we force them off with the NMI.
*/
if (num_online_cpus() > 1) {
/* did someone beat us here? */
if (atomic_cmpxchg(&stopping_cpu, -1, safe_smp_processor_id()) != -1)
return;
/* sync above data before sending IRQ */
wmb();
apic->send_IPI_allbutself(REBOOT_VECTOR);
/*
* Don't wait longer than a second if the caller
* didn't ask us to wait.
*/
timeout = USEC_PER_SEC;
while (num_online_cpus() > 1 && (wait || timeout--))
udelay(1);
}
/* if the REBOOT_VECTOR didn't work, try with the NMI */
if ((num_online_cpus() > 1) && (!smp_no_nmi_ipi)) {
if (register_nmi_handler(NMI_LOCAL, smp_stop_nmi_callback,
NMI_FLAG_FIRST, "smp_stop"))
/* Note: we ignore failures here */
/* Hope the REBOOT_IRQ is good enough */
goto finish;
/* sync above data before sending IRQ */
wmb();
pr_emerg("Shutting down cpus with NMI\n");
apic->send_IPI_allbutself(NMI_VECTOR);
/*
* Don't wait longer than a 10 ms if the caller
* didn't ask us to wait.
*/
timeout = USEC_PER_MSEC * 10;
while (num_online_cpus() > 1 && (wait || timeout--))
udelay(1);
}
finish:
local_irq_save(flags);
disable_local_APIC();
local_irq_restore(flags);
}
/*
* Reschedule call back.
*/
static inline void __smp_reschedule_interrupt(void)
{
inc_irq_stat(irq_resched_count);
scheduler_ipi();
}
void smp_reschedule_interrupt(struct pt_regs *regs)
{
ack_APIC_irq();
__smp_reschedule_interrupt();
/*
* KVM uses this interrupt to force a cpu out of guest mode
*/
}
static inline void call_function_entering_irq(void)
{
ack_APIC_irq();
irq_enter();
}
static inline void __smp_call_function_interrupt(void)
{
generic_smp_call_function_interrupt();
inc_irq_stat(irq_call_count);
}
void smp_call_function_interrupt(struct pt_regs *regs)
{
call_function_entering_irq();
__smp_call_function_interrupt();
exiting_irq();
}
static inline void __smp_call_function_single_interrupt(void)
{
generic_smp_call_function_single_interrupt();
inc_irq_stat(irq_call_count);
}
void smp_call_function_single_interrupt(struct pt_regs *regs)
{
call_function_entering_irq();
__smp_call_function_single_interrupt();
exiting_irq();
}
static int __init nonmi_ipi_setup(char *str)
{
smp_no_nmi_ipi = true;
return 1;
}
__setup("nonmi_ipi", nonmi_ipi_setup);
struct smp_ops smp_ops = {
.smp_prepare_boot_cpu = native_smp_prepare_boot_cpu,
.smp_prepare_cpus = native_smp_prepare_cpus,
.smp_cpus_done = native_smp_cpus_done,
.stop_other_cpus = native_stop_other_cpus,
.smp_send_reschedule = native_smp_send_reschedule,
.cpu_up = native_cpu_up,
.cpu_die = native_cpu_die,
.cpu_disable = native_cpu_disable,
.play_dead = native_play_dead,
.send_call_func_ipi = native_send_call_func_ipi,
.send_call_func_single_ipi = native_send_call_func_single_ipi,
};
EXPORT_SYMBOL_GPL(smp_ops);