AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-21 09:34:51 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
edd384f682
linux_dsm_epyc7002/drivers/net/arcnet/com20020_cs.c
Joe Perches 0fec65130b arcnet: com20020: Use arcnet_<I/O> routines 
Simplify and make consistent the current uses of inb/outb
by using the newly introduced arcnet_<I/O> equivalents.

o Add new #defines for register offsets
  There is an register offset, 8, that is unnamed and used as-is.
o Remove old #defines that included the ioaddr
o Remove obfuscating macros by expanding them in-place where appropriate
o Create static inline com20020_set_subaddress for the SET_SUBADR macro

There is an unused arcnet config entry CONFIGSA100_CT6001 which added a
special #define BUS_ALIGN which was introduced but never used in fullhist git
tree commit 22cfce4b82b0 ("[ARCNET]: Fixes.") in Nov 2004 for Linux v2.6.10.

This BUS_ALIGN #define tries to allow 8 bit devices to work on a 16 bit
bus by aligning addresses to 16 bit boundaries.

Move this currently unused CONFIG_SA1100_CT6001 BUS_ALIGN macro from
com20020.h to arcdevice.h.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
2015-09-23 08:44:26 +02:00

323 lines
7.5 KiB
C
Raw Blame History

/*
* Linux ARCnet driver - COM20020 PCMCIA support
*
* Written 1994-1999 by Avery Pennarun,
* based on an ISA version by David Woodhouse.
* Derived from ibmtr_cs.c by Steve Kipisz (pcmcia-cs 3.1.4)
* which was derived from pcnet_cs.c by David Hinds.
* Some additional portions derived from skeleton.c by Donald Becker.
*
* Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
* for sponsoring the further development of this driver.
*
* **********************
*
* The original copyright of skeleton.c was as follows:
*
* skeleton.c Written 1993 by Donald Becker.
* Copyright 1993 United States Government as represented by the
* Director, National Security Agency. This software may only be used
* and distributed according to the terms of the GNU General Public License as
* modified by SRC, incorporated herein by reference.
*
* **********************
* Changes:
* Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 08/08/2000
* - reorganize kmallocs in com20020_attach, checking all for failure
* and releasing the previous allocations if one fails
* **********************
*
* For more details, see drivers/net/arcnet.c
*
* **********************
*/
#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/io.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#include "arcdevice.h"
#include "com20020.h"
static void regdump(struct net_device *dev)
{
#ifdef DEBUG
int ioaddr = dev->base_addr;
int count;
netdev_dbg(dev, "register dump:\n");
for (count = 0; count < 16; count++) {
if (!(count % 16))
pr_cont("%04X:", ioaddr + count);
pr_cont(" %02X", arcnet_inb(ioaddr, count));
}
pr_cont("\n");
netdev_dbg(dev, "buffer0 dump:\n");
/* set up the address register */
count = 0;
arcnet_outb((count >> 8) | RDDATAflag | AUTOINCflag,
ioaddr, com20020_REG_W_ADDR_HI);
arcnet_outb(count & 0xff, ioaddr, COM20020_REG_W_ADDR_LO);
for (count = 0; count < 256 + 32; count++) {
if (!(count % 16))
pr_cont("%04X:", count);
/* copy the data */
pr_cont(" %02X", arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA));
}
pr_cont("\n");
#endif
}
/*====================================================================*/
/* Parameters that can be set with 'insmod' */
static int node;
static int timeout = 3;
static int backplane;
static int clockp;
static int clockm;
module_param(node, int, 0);
module_param(timeout, int, 0);
module_param(backplane, int, 0);
module_param(clockp, int, 0);
module_param(clockm, int, 0);
MODULE_LICENSE("GPL");
/*====================================================================*/
static int com20020_config(struct pcmcia_device *link);
static void com20020_release(struct pcmcia_device *link);
static void com20020_detach(struct pcmcia_device *p_dev);
/*====================================================================*/
static int com20020_probe(struct pcmcia_device *p_dev)
{
struct com20020_dev *info;
struct net_device *dev;
struct arcnet_local *lp;
dev_dbg(&p_dev->dev, "com20020_attach()\n");
/* Create new network device */
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
goto fail_alloc_info;
dev = alloc_arcdev("");
if (!dev)
goto fail_alloc_dev;
lp = netdev_priv(dev);
lp->timeout = timeout;
lp->backplane = backplane;
lp->clockp = clockp;
lp->clockm = clockm & 3;
lp->hw.owner = THIS_MODULE;
/* fill in our module parameters as defaults */
dev->dev_addr[0] = node;
p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
p_dev->resource[0]->end = 16;
p_dev->config_flags |= CONF_ENABLE_IRQ;
info->dev = dev;
p_dev->priv = info;
return com20020_config(p_dev);
fail_alloc_dev:
kfree(info);
fail_alloc_info:
return -ENOMEM;
} /* com20020_attach */
static void com20020_detach(struct pcmcia_device *link)
{
struct com20020_dev *info = link->priv;
struct net_device *dev = info->dev;
dev_dbg(&link->dev, "detach...\n");
dev_dbg(&link->dev, "com20020_detach\n");
dev_dbg(&link->dev, "unregister...\n");
unregister_netdev(dev);
/* this is necessary because we register our IRQ separately
* from card services.
*/
if (dev->irq)
free_irq(dev->irq, dev);
com20020_release(link);
/* Unlink device structure, free bits */
dev_dbg(&link->dev, "unlinking...\n");
if (link->priv) {
dev = info->dev;
if (dev) {
dev_dbg(&link->dev, "kfree...\n");
free_netdev(dev);
}
dev_dbg(&link->dev, "kfree2...\n");
kfree(info);
}
} /* com20020_detach */
static int com20020_config(struct pcmcia_device *link)
{
struct arcnet_local *lp;
struct com20020_dev *info;
struct net_device *dev;
int i, ret;
int ioaddr;
info = link->priv;
dev = info->dev;
dev_dbg(&link->dev, "config...\n");
dev_dbg(&link->dev, "com20020_config\n");
dev_dbg(&link->dev, "baseport1 is %Xh\n",
(unsigned int)link->resource[0]->start);
i = -ENODEV;
link->io_lines = 16;
if (!link->resource[0]->start) {
for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10) {
link->resource[0]->start = ioaddr;
i = pcmcia_request_io(link);
if (i == 0)
break;
}
} else {
i = pcmcia_request_io(link);
}
if (i != 0) {
dev_dbg(&link->dev, "requestIO failed totally!\n");
goto failed;
}
ioaddr = dev->base_addr = link->resource[0]->start;
dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
dev_dbg(&link->dev, "request IRQ %d\n",
link->irq);
if (!link->irq) {
dev_dbg(&link->dev, "requestIRQ failed totally!\n");
goto failed;
}
dev->irq = link->irq;
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
if (com20020_check(dev)) {
regdump(dev);
goto failed;
}
lp = netdev_priv(dev);
lp->card_name = "PCMCIA COM20020";
lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */
SET_NETDEV_DEV(dev, &link->dev);
i = com20020_found(dev, 0); /* calls register_netdev */
if (i != 0) {
dev_notice(&link->dev,
"com20020_found() failed\n");
goto failed;
}
netdev_dbg(dev, "port %#3lx, irq %d\n",
dev->base_addr, dev->irq);
return 0;
failed:
dev_dbg(&link->dev, "com20020_config failed...\n");
com20020_release(link);
return -ENODEV;
} /* com20020_config */
static void com20020_release(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "com20020_release\n");
pcmcia_disable_device(link);
}
static int com20020_suspend(struct pcmcia_device *link)
{
struct com20020_dev *info = link->priv;
struct net_device *dev = info->dev;
if (link->open)
netif_device_detach(dev);
return 0;
}
static int com20020_resume(struct pcmcia_device *link)
{
struct com20020_dev *info = link->priv;
struct net_device *dev = info->dev;
if (link->open) {
int ioaddr = dev->base_addr;
struct arcnet_local *lp = netdev_priv(dev);
arcnet_outb(lp->config | 0x80, ioaddr, COM20020_REG_W_CONFIG);
udelay(5);
arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
}
return 0;
}
static const struct pcmcia_device_id com20020_ids[] = {
PCMCIA_DEVICE_PROD_ID12("Contemporary Control Systems, Inc.",
"PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf),
PCMCIA_DEVICE_PROD_ID12("SoHard AG",
"SH ARC PCMCIA", 0xf8991729, 0x69dff0c7),
PCMCIA_DEVICE_NULL
};
MODULE_DEVICE_TABLE(pcmcia, com20020_ids);
static struct pcmcia_driver com20020_cs_driver = {
.owner = THIS_MODULE,
.name = "com20020_cs",
.probe = com20020_probe,
.remove = com20020_detach,
.id_table = com20020_ids,
.suspend = com20020_suspend,
.resume = com20020_resume,
};
module_pcmcia_driver(com20020_cs_driver);
Reference in New Issue View Git Blame Copy Permalink