mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-01 11:46:49 +07:00
ed3768a8d9
* __fixup_smp_on_up has been modified with support for the
THUMB2_KERNEL case. For THUMB2_KERNEL only, fixups are split
into halfwords in case of misalignment, since we can't rely on
unaligned accesses working before turning the MMU on.
No attempt is made to optimise the aligned case, since the
number of fixups is typically small, and it seems best to keep
the code as simple as possible.
* Add a rotate in the fixup_smp code in order to support
CPU_BIG_ENDIAN, as suggested by Nicolas Pitre.
* Add an assembly-time sanity-check to ALT_UP() to ensure that
the content really is the right size (4 bytes).
(No check is done for ALT_SMP(). Possibly, this could be fixed
by splitting the two uses ot ALT_SMP() (ALT_SMP...SMP_UP versus
ALT_SMP...SMP_UP_B) into two macros. In the first case,
ALT_SMP needs to expand to >= 4 bytes, not == 4.)
* smp_mpidr.h (which implements ALT_SMP()/ALT_UP() manually due
to macro limitations) has not been modified: the affected
instruction (mov) has no 16-bit encoding, so the correct
instruction size is satisfied in this case.
* A "mode" parameter has been added to smp_dmb:
smp_dmb arm @ assumes 4-byte instructions (for ARM code, e.g. kuser)
smp_dmb @ uses W() to ensure 4-byte instructions for ALT_SMP()
This avoids assembly failures due to use of W() inside smp_dmb,
when assembling pure-ARM code in the vectors page.
There might be a better way to achieve this.
* Kconfig: make SMP_ON_UP depend on
(!THUMB2_KERNEL || !BIG_ENDIAN) i.e., THUMB2_KERNEL is now
supported, but only if !BIG_ENDIAN (The fixup code for Thumb-2
currently assumes little-endian order.)
Tested using a single generic realview kernel on:
ARM RealView PB-A8 (CONFIG_THUMB2_KERNEL={n,y})
ARM RealView PBX-A9 (SMP)
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
292 lines
6.2 KiB
C
292 lines
6.2 KiB
C
/*
|
|
* arch/arm/include/asm/assembler.h
|
|
*
|
|
* Copyright (C) 1996-2000 Russell King
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This file contains arm architecture specific defines
|
|
* for the different processors.
|
|
*
|
|
* Do not include any C declarations in this file - it is included by
|
|
* assembler source.
|
|
*/
|
|
#ifndef __ASSEMBLY__
|
|
#error "Only include this from assembly code"
|
|
#endif
|
|
|
|
#include <asm/ptrace.h>
|
|
|
|
/*
|
|
* Endian independent macros for shifting bytes within registers.
|
|
*/
|
|
#ifndef __ARMEB__
|
|
#define pull lsr
|
|
#define push lsl
|
|
#define get_byte_0 lsl #0
|
|
#define get_byte_1 lsr #8
|
|
#define get_byte_2 lsr #16
|
|
#define get_byte_3 lsr #24
|
|
#define put_byte_0 lsl #0
|
|
#define put_byte_1 lsl #8
|
|
#define put_byte_2 lsl #16
|
|
#define put_byte_3 lsl #24
|
|
#else
|
|
#define pull lsl
|
|
#define push lsr
|
|
#define get_byte_0 lsr #24
|
|
#define get_byte_1 lsr #16
|
|
#define get_byte_2 lsr #8
|
|
#define get_byte_3 lsl #0
|
|
#define put_byte_0 lsl #24
|
|
#define put_byte_1 lsl #16
|
|
#define put_byte_2 lsl #8
|
|
#define put_byte_3 lsl #0
|
|
#endif
|
|
|
|
/*
|
|
* Data preload for architectures that support it
|
|
*/
|
|
#if __LINUX_ARM_ARCH__ >= 5
|
|
#define PLD(code...) code
|
|
#else
|
|
#define PLD(code...)
|
|
#endif
|
|
|
|
/*
|
|
* This can be used to enable code to cacheline align the destination
|
|
* pointer when bulk writing to memory. Experiments on StrongARM and
|
|
* XScale didn't show this a worthwhile thing to do when the cache is not
|
|
* set to write-allocate (this would need further testing on XScale when WA
|
|
* is used).
|
|
*
|
|
* On Feroceon there is much to gain however, regardless of cache mode.
|
|
*/
|
|
#ifdef CONFIG_CPU_FEROCEON
|
|
#define CALGN(code...) code
|
|
#else
|
|
#define CALGN(code...)
|
|
#endif
|
|
|
|
/*
|
|
* Enable and disable interrupts
|
|
*/
|
|
#if __LINUX_ARM_ARCH__ >= 6
|
|
.macro disable_irq_notrace
|
|
cpsid i
|
|
.endm
|
|
|
|
.macro enable_irq_notrace
|
|
cpsie i
|
|
.endm
|
|
#else
|
|
.macro disable_irq_notrace
|
|
msr cpsr_c, #PSR_I_BIT | SVC_MODE
|
|
.endm
|
|
|
|
.macro enable_irq_notrace
|
|
msr cpsr_c, #SVC_MODE
|
|
.endm
|
|
#endif
|
|
|
|
.macro asm_trace_hardirqs_off
|
|
#if defined(CONFIG_TRACE_IRQFLAGS)
|
|
stmdb sp!, {r0-r3, ip, lr}
|
|
bl trace_hardirqs_off
|
|
ldmia sp!, {r0-r3, ip, lr}
|
|
#endif
|
|
.endm
|
|
|
|
.macro asm_trace_hardirqs_on_cond, cond
|
|
#if defined(CONFIG_TRACE_IRQFLAGS)
|
|
/*
|
|
* actually the registers should be pushed and pop'd conditionally, but
|
|
* after bl the flags are certainly clobbered
|
|
*/
|
|
stmdb sp!, {r0-r3, ip, lr}
|
|
bl\cond trace_hardirqs_on
|
|
ldmia sp!, {r0-r3, ip, lr}
|
|
#endif
|
|
.endm
|
|
|
|
.macro asm_trace_hardirqs_on
|
|
asm_trace_hardirqs_on_cond al
|
|
.endm
|
|
|
|
.macro disable_irq
|
|
disable_irq_notrace
|
|
asm_trace_hardirqs_off
|
|
.endm
|
|
|
|
.macro enable_irq
|
|
asm_trace_hardirqs_on
|
|
enable_irq_notrace
|
|
.endm
|
|
/*
|
|
* Save the current IRQ state and disable IRQs. Note that this macro
|
|
* assumes FIQs are enabled, and that the processor is in SVC mode.
|
|
*/
|
|
.macro save_and_disable_irqs, oldcpsr
|
|
mrs \oldcpsr, cpsr
|
|
disable_irq
|
|
.endm
|
|
|
|
/*
|
|
* Restore interrupt state previously stored in a register. We don't
|
|
* guarantee that this will preserve the flags.
|
|
*/
|
|
.macro restore_irqs_notrace, oldcpsr
|
|
msr cpsr_c, \oldcpsr
|
|
.endm
|
|
|
|
.macro restore_irqs, oldcpsr
|
|
tst \oldcpsr, #PSR_I_BIT
|
|
asm_trace_hardirqs_on_cond eq
|
|
restore_irqs_notrace \oldcpsr
|
|
.endm
|
|
|
|
#define USER(x...) \
|
|
9999: x; \
|
|
.pushsection __ex_table,"a"; \
|
|
.align 3; \
|
|
.long 9999b,9001f; \
|
|
.popsection
|
|
|
|
#ifdef CONFIG_SMP
|
|
#define ALT_SMP(instr...) \
|
|
9998: instr
|
|
/*
|
|
* Note: if you get assembler errors from ALT_UP() when building with
|
|
* CONFIG_THUMB2_KERNEL, you almost certainly need to use
|
|
* ALT_SMP( W(instr) ... )
|
|
*/
|
|
#define ALT_UP(instr...) \
|
|
.pushsection ".alt.smp.init", "a" ;\
|
|
.long 9998b ;\
|
|
9997: instr ;\
|
|
.if . - 9997b != 4 ;\
|
|
.error "ALT_UP() content must assemble to exactly 4 bytes";\
|
|
.endif ;\
|
|
.popsection
|
|
#define ALT_UP_B(label) \
|
|
.equ up_b_offset, label - 9998b ;\
|
|
.pushsection ".alt.smp.init", "a" ;\
|
|
.long 9998b ;\
|
|
W(b) . + up_b_offset ;\
|
|
.popsection
|
|
#else
|
|
#define ALT_SMP(instr...)
|
|
#define ALT_UP(instr...) instr
|
|
#define ALT_UP_B(label) b label
|
|
#endif
|
|
|
|
/*
|
|
* SMP data memory barrier
|
|
*/
|
|
.macro smp_dmb mode
|
|
#ifdef CONFIG_SMP
|
|
#if __LINUX_ARM_ARCH__ >= 7
|
|
.ifeqs "\mode","arm"
|
|
ALT_SMP(dmb)
|
|
.else
|
|
ALT_SMP(W(dmb))
|
|
.endif
|
|
#elif __LINUX_ARM_ARCH__ == 6
|
|
ALT_SMP(mcr p15, 0, r0, c7, c10, 5) @ dmb
|
|
#else
|
|
#error Incompatible SMP platform
|
|
#endif
|
|
.ifeqs "\mode","arm"
|
|
ALT_UP(nop)
|
|
.else
|
|
ALT_UP(W(nop))
|
|
.endif
|
|
#endif
|
|
.endm
|
|
|
|
#ifdef CONFIG_THUMB2_KERNEL
|
|
.macro setmode, mode, reg
|
|
mov \reg, #\mode
|
|
msr cpsr_c, \reg
|
|
.endm
|
|
#else
|
|
.macro setmode, mode, reg
|
|
msr cpsr_c, #\mode
|
|
.endm
|
|
#endif
|
|
|
|
/*
|
|
* STRT/LDRT access macros with ARM and Thumb-2 variants
|
|
*/
|
|
#ifdef CONFIG_THUMB2_KERNEL
|
|
|
|
.macro usraccoff, instr, reg, ptr, inc, off, cond, abort
|
|
9999:
|
|
.if \inc == 1
|
|
\instr\cond\()bt \reg, [\ptr, #\off]
|
|
.elseif \inc == 4
|
|
\instr\cond\()t \reg, [\ptr, #\off]
|
|
.else
|
|
.error "Unsupported inc macro argument"
|
|
.endif
|
|
|
|
.pushsection __ex_table,"a"
|
|
.align 3
|
|
.long 9999b, \abort
|
|
.popsection
|
|
.endm
|
|
|
|
.macro usracc, instr, reg, ptr, inc, cond, rept, abort
|
|
@ explicit IT instruction needed because of the label
|
|
@ introduced by the USER macro
|
|
.ifnc \cond,al
|
|
.if \rept == 1
|
|
itt \cond
|
|
.elseif \rept == 2
|
|
ittt \cond
|
|
.else
|
|
.error "Unsupported rept macro argument"
|
|
.endif
|
|
.endif
|
|
|
|
@ Slightly optimised to avoid incrementing the pointer twice
|
|
usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
|
|
.if \rept == 2
|
|
usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort
|
|
.endif
|
|
|
|
add\cond \ptr, #\rept * \inc
|
|
.endm
|
|
|
|
#else /* !CONFIG_THUMB2_KERNEL */
|
|
|
|
.macro usracc, instr, reg, ptr, inc, cond, rept, abort
|
|
.rept \rept
|
|
9999:
|
|
.if \inc == 1
|
|
\instr\cond\()bt \reg, [\ptr], #\inc
|
|
.elseif \inc == 4
|
|
\instr\cond\()t \reg, [\ptr], #\inc
|
|
.else
|
|
.error "Unsupported inc macro argument"
|
|
.endif
|
|
|
|
.pushsection __ex_table,"a"
|
|
.align 3
|
|
.long 9999b, \abort
|
|
.popsection
|
|
.endr
|
|
.endm
|
|
|
|
#endif /* CONFIG_THUMB2_KERNEL */
|
|
|
|
.macro strusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
|
|
usracc str, \reg, \ptr, \inc, \cond, \rept, \abort
|
|
.endm
|
|
|
|
.macro ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
|
|
usracc ldr, \reg, \ptr, \inc, \cond, \rept, \abort
|
|
.endm
|