David Gnedt ed3213c913 wl1251: fix channel switching in monitor mode ... Use the ENABLE_RX command for channel switching when no interface is present (monitor mode only). The advantage of ENABLE_RX is that it leaves the tx data path disabled in firmware, whereas the usual JOIN command seems to transmit some frames at firmware level. Signed-off-by: David Gnedt <david.gnedt@davizone.at> Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>		2014-01-09 10:56:07 -05:00
..
acx.c	wl1251: implement multicast address filtering (fwd)	2014-01-09 10:56:06 -05:00
acx.h	wl1251: implement multicast address filtering (fwd)	2014-01-09 10:56:06 -05:00
boot.c	wl1251: retry power save entry	2014-01-09 10:53:38 -05:00
boot.h
cmd.c	wl1251: split RX and TX data path initialisation	2014-01-09 10:53:39 -05:00
cmd.h	wl1251: split RX and TX data path initialisation	2014-01-09 10:53:39 -05:00
debugfs.c
debugfs.h
event.c	wl1251: retry power save entry	2014-01-09 10:53:38 -05:00
event.h	wl1251: retry power save entry	2014-01-09 10:53:38 -05:00
init.c	wl1251: implement multicast address filtering (fwd)	2014-01-09 10:56:06 -05:00
init.h
io.c
io.h
Kconfig	Remove GENERIC_HARDIRQ config option	2013-09-13 15:09:52 +02:00
main.c	wl1251: fix channel switching in monitor mode	2014-01-09 10:56:07 -05:00
Makefile
ps.c	wl1251: don't use [delayed_]work_pending()	2012-12-28 13:40:15 -08:00
ps.h
reg.h
rx.c	wl1251: configure hardware en-/decryption for monitor mode	2014-01-09 10:54:58 -05:00
rx.h
sdio.c	wl1251: call pm_runtime_put_sync in pm_runtime_get_sync failed case	2013-03-05 10:27:16 +02:00
spi.c	wireless: wl1251: use dev_get_platdata()	2013-09-26 15:13:40 -04:00
spi.h
tx.c	wl1251: configure hardware en-/decryption for monitor mode	2014-01-09 10:54:58 -05:00
tx.h
wl12xx_80211.h
wl1251.h	wl1251: implement multicast address filtering (fwd)	2014-01-09 10:56:06 -05:00