mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 09:55:12 +07:00
99baac21e4
Nadav reported parallel MADV_DONTNEED on same range has a stale TLB problem and Mel fixed it[1] and found same problem on MADV_FREE[2]. Quote from Mel Gorman: "The race in question is CPU 0 running madv_free and updating some PTEs while CPU 1 is also running madv_free and looking at the same PTEs. CPU 1 may have writable TLB entries for a page but fail the pte_dirty check (because CPU 0 has updated it already) and potentially fail to flush. Hence, when madv_free on CPU 1 returns, there are still potentially writable TLB entries and the underlying PTE is still present so that a subsequent write does not necessarily propagate the dirty bit to the underlying PTE any more. Reclaim at some unknown time at the future may then see that the PTE is still clean and discard the page even though a write has happened in the meantime. I think this is possible but I could have missed some protection in madv_free that prevents it happening." This patch aims for solving both problems all at once and is ready for other problem with KSM, MADV_FREE and soft-dirty story[3]. TLB batch API(tlb_[gather|finish]_mmu] uses [inc|dec]_tlb_flush_pending and mmu_tlb_flush_pending so that when tlb_finish_mmu is called, we can catch there are parallel threads going on. In that case, forcefully, flush TLB to prevent for user to access memory via stale TLB entry although it fail to gather page table entry. I confirmed this patch works with [4] test program Nadav gave so this patch supersedes "mm: Always flush VMA ranges affected by zap_page_range v2" in current mmotm. NOTE: This patch modifies arch-specific TLB gathering interface(x86, ia64, s390, sh, um). It seems most of architecture are straightforward but s390 need to be careful because tlb_flush_mmu works only if mm->context.flush_mm is set to non-zero which happens only a pte entry really is cleared by ptep_get_and_clear and friends. However, this problem never changes the pte entries but need to flush to prevent memory access from stale tlb. [1] http://lkml.kernel.org/r/20170725101230.5v7gvnjmcnkzzql3@techsingularity.net [2] http://lkml.kernel.org/r/20170725100722.2dxnmgypmwnrfawp@suse.de [3] http://lkml.kernel.org/r/BD3A0EBE-ECF4-41D4-87FA-C755EA9AB6BD@gmail.com [4] https://patchwork.kernel.org/patch/9861621/ [minchan@kernel.org: decrease tlb flush pending count in tlb_finish_mmu] Link: http://lkml.kernel.org/r/20170808080821.GA31730@bbox Link: http://lkml.kernel.org/r/20170802000818.4760-7-namit@vmware.com Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Nadav Amit <namit@vmware.com> Reported-by: Nadav Amit <namit@vmware.com> Reported-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Jeff Dike <jdike@addtoit.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
299 lines
9.1 KiB
C
299 lines
9.1 KiB
C
/* include/asm-generic/tlb.h
|
|
*
|
|
* Generic TLB shootdown code
|
|
*
|
|
* Copyright 2001 Red Hat, Inc.
|
|
* Based on code from mm/memory.c Copyright Linus Torvalds and others.
|
|
*
|
|
* Copyright 2011 Red Hat, Inc., Peter Zijlstra
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
#ifndef _ASM_GENERIC__TLB_H
|
|
#define _ASM_GENERIC__TLB_H
|
|
|
|
#include <linux/swap.h>
|
|
#include <asm/pgalloc.h>
|
|
#include <asm/tlbflush.h>
|
|
|
|
#ifdef CONFIG_HAVE_RCU_TABLE_FREE
|
|
/*
|
|
* Semi RCU freeing of the page directories.
|
|
*
|
|
* This is needed by some architectures to implement software pagetable walkers.
|
|
*
|
|
* gup_fast() and other software pagetable walkers do a lockless page-table
|
|
* walk and therefore needs some synchronization with the freeing of the page
|
|
* directories. The chosen means to accomplish that is by disabling IRQs over
|
|
* the walk.
|
|
*
|
|
* Architectures that use IPIs to flush TLBs will then automagically DTRT,
|
|
* since we unlink the page, flush TLBs, free the page. Since the disabling of
|
|
* IRQs delays the completion of the TLB flush we can never observe an already
|
|
* freed page.
|
|
*
|
|
* Architectures that do not have this (PPC) need to delay the freeing by some
|
|
* other means, this is that means.
|
|
*
|
|
* What we do is batch the freed directory pages (tables) and RCU free them.
|
|
* We use the sched RCU variant, as that guarantees that IRQ/preempt disabling
|
|
* holds off grace periods.
|
|
*
|
|
* However, in order to batch these pages we need to allocate storage, this
|
|
* allocation is deep inside the MM code and can thus easily fail on memory
|
|
* pressure. To guarantee progress we fall back to single table freeing, see
|
|
* the implementation of tlb_remove_table_one().
|
|
*
|
|
*/
|
|
struct mmu_table_batch {
|
|
struct rcu_head rcu;
|
|
unsigned int nr;
|
|
void *tables[0];
|
|
};
|
|
|
|
#define MAX_TABLE_BATCH \
|
|
((PAGE_SIZE - sizeof(struct mmu_table_batch)) / sizeof(void *))
|
|
|
|
extern void tlb_table_flush(struct mmu_gather *tlb);
|
|
extern void tlb_remove_table(struct mmu_gather *tlb, void *table);
|
|
|
|
#endif
|
|
|
|
/*
|
|
* If we can't allocate a page to make a big batch of page pointers
|
|
* to work on, then just handle a few from the on-stack structure.
|
|
*/
|
|
#define MMU_GATHER_BUNDLE 8
|
|
|
|
struct mmu_gather_batch {
|
|
struct mmu_gather_batch *next;
|
|
unsigned int nr;
|
|
unsigned int max;
|
|
struct page *pages[0];
|
|
};
|
|
|
|
#define MAX_GATHER_BATCH \
|
|
((PAGE_SIZE - sizeof(struct mmu_gather_batch)) / sizeof(void *))
|
|
|
|
/*
|
|
* Limit the maximum number of mmu_gather batches to reduce a risk of soft
|
|
* lockups for non-preemptible kernels on huge machines when a lot of memory
|
|
* is zapped during unmapping.
|
|
* 10K pages freed at once should be safe even without a preemption point.
|
|
*/
|
|
#define MAX_GATHER_BATCH_COUNT (10000UL/MAX_GATHER_BATCH)
|
|
|
|
/* struct mmu_gather is an opaque type used by the mm code for passing around
|
|
* any data needed by arch specific code for tlb_remove_page.
|
|
*/
|
|
struct mmu_gather {
|
|
struct mm_struct *mm;
|
|
#ifdef CONFIG_HAVE_RCU_TABLE_FREE
|
|
struct mmu_table_batch *batch;
|
|
#endif
|
|
unsigned long start;
|
|
unsigned long end;
|
|
/* we are in the middle of an operation to clear
|
|
* a full mm and can make some optimizations */
|
|
unsigned int fullmm : 1,
|
|
/* we have performed an operation which
|
|
* requires a complete flush of the tlb */
|
|
need_flush_all : 1;
|
|
|
|
struct mmu_gather_batch *active;
|
|
struct mmu_gather_batch local;
|
|
struct page *__pages[MMU_GATHER_BUNDLE];
|
|
unsigned int batch_count;
|
|
int page_size;
|
|
};
|
|
|
|
#define HAVE_GENERIC_MMU_GATHER
|
|
|
|
void arch_tlb_gather_mmu(struct mmu_gather *tlb,
|
|
struct mm_struct *mm, unsigned long start, unsigned long end);
|
|
void tlb_flush_mmu(struct mmu_gather *tlb);
|
|
void arch_tlb_finish_mmu(struct mmu_gather *tlb,
|
|
unsigned long start, unsigned long end, bool force);
|
|
extern bool __tlb_remove_page_size(struct mmu_gather *tlb, struct page *page,
|
|
int page_size);
|
|
|
|
static inline void __tlb_adjust_range(struct mmu_gather *tlb,
|
|
unsigned long address,
|
|
unsigned int range_size)
|
|
{
|
|
tlb->start = min(tlb->start, address);
|
|
tlb->end = max(tlb->end, address + range_size);
|
|
}
|
|
|
|
static inline void __tlb_reset_range(struct mmu_gather *tlb)
|
|
{
|
|
if (tlb->fullmm) {
|
|
tlb->start = tlb->end = ~0;
|
|
} else {
|
|
tlb->start = TASK_SIZE;
|
|
tlb->end = 0;
|
|
}
|
|
}
|
|
|
|
static inline void tlb_remove_page_size(struct mmu_gather *tlb,
|
|
struct page *page, int page_size)
|
|
{
|
|
if (__tlb_remove_page_size(tlb, page, page_size))
|
|
tlb_flush_mmu(tlb);
|
|
}
|
|
|
|
static inline bool __tlb_remove_page(struct mmu_gather *tlb, struct page *page)
|
|
{
|
|
return __tlb_remove_page_size(tlb, page, PAGE_SIZE);
|
|
}
|
|
|
|
/* tlb_remove_page
|
|
* Similar to __tlb_remove_page but will call tlb_flush_mmu() itself when
|
|
* required.
|
|
*/
|
|
static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
|
|
{
|
|
return tlb_remove_page_size(tlb, page, PAGE_SIZE);
|
|
}
|
|
|
|
#ifndef tlb_remove_check_page_size_change
|
|
#define tlb_remove_check_page_size_change tlb_remove_check_page_size_change
|
|
static inline void tlb_remove_check_page_size_change(struct mmu_gather *tlb,
|
|
unsigned int page_size)
|
|
{
|
|
/*
|
|
* We don't care about page size change, just update
|
|
* mmu_gather page size here so that debug checks
|
|
* doesn't throw false warning.
|
|
*/
|
|
#ifdef CONFIG_DEBUG_VM
|
|
tlb->page_size = page_size;
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* In the case of tlb vma handling, we can optimise these away in the
|
|
* case where we're doing a full MM flush. When we're doing a munmap,
|
|
* the vmas are adjusted to only cover the region to be torn down.
|
|
*/
|
|
#ifndef tlb_start_vma
|
|
#define tlb_start_vma(tlb, vma) do { } while (0)
|
|
#endif
|
|
|
|
#define __tlb_end_vma(tlb, vma) \
|
|
do { \
|
|
if (!tlb->fullmm && tlb->end) { \
|
|
tlb_flush(tlb); \
|
|
__tlb_reset_range(tlb); \
|
|
} \
|
|
} while (0)
|
|
|
|
#ifndef tlb_end_vma
|
|
#define tlb_end_vma __tlb_end_vma
|
|
#endif
|
|
|
|
#ifndef __tlb_remove_tlb_entry
|
|
#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
|
|
#endif
|
|
|
|
/**
|
|
* tlb_remove_tlb_entry - remember a pte unmapping for later tlb invalidation.
|
|
*
|
|
* Record the fact that pte's were really unmapped by updating the range,
|
|
* so we can later optimise away the tlb invalidate. This helps when
|
|
* userspace is unmapping already-unmapped pages, which happens quite a lot.
|
|
*/
|
|
#define tlb_remove_tlb_entry(tlb, ptep, address) \
|
|
do { \
|
|
__tlb_adjust_range(tlb, address, PAGE_SIZE); \
|
|
__tlb_remove_tlb_entry(tlb, ptep, address); \
|
|
} while (0)
|
|
|
|
#define tlb_remove_huge_tlb_entry(h, tlb, ptep, address) \
|
|
do { \
|
|
__tlb_adjust_range(tlb, address, huge_page_size(h)); \
|
|
__tlb_remove_tlb_entry(tlb, ptep, address); \
|
|
} while (0)
|
|
|
|
/**
|
|
* tlb_remove_pmd_tlb_entry - remember a pmd mapping for later tlb invalidation
|
|
* This is a nop so far, because only x86 needs it.
|
|
*/
|
|
#ifndef __tlb_remove_pmd_tlb_entry
|
|
#define __tlb_remove_pmd_tlb_entry(tlb, pmdp, address) do {} while (0)
|
|
#endif
|
|
|
|
#define tlb_remove_pmd_tlb_entry(tlb, pmdp, address) \
|
|
do { \
|
|
__tlb_adjust_range(tlb, address, HPAGE_PMD_SIZE); \
|
|
__tlb_remove_pmd_tlb_entry(tlb, pmdp, address); \
|
|
} while (0)
|
|
|
|
/**
|
|
* tlb_remove_pud_tlb_entry - remember a pud mapping for later tlb
|
|
* invalidation. This is a nop so far, because only x86 needs it.
|
|
*/
|
|
#ifndef __tlb_remove_pud_tlb_entry
|
|
#define __tlb_remove_pud_tlb_entry(tlb, pudp, address) do {} while (0)
|
|
#endif
|
|
|
|
#define tlb_remove_pud_tlb_entry(tlb, pudp, address) \
|
|
do { \
|
|
__tlb_adjust_range(tlb, address, HPAGE_PUD_SIZE); \
|
|
__tlb_remove_pud_tlb_entry(tlb, pudp, address); \
|
|
} while (0)
|
|
|
|
/*
|
|
* For things like page tables caches (ie caching addresses "inside" the
|
|
* page tables, like x86 does), for legacy reasons, flushing an
|
|
* individual page had better flush the page table caches behind it. This
|
|
* is definitely how x86 works, for example. And if you have an
|
|
* architected non-legacy page table cache (which I'm not aware of
|
|
* anybody actually doing), you're going to have some architecturally
|
|
* explicit flushing for that, likely *separate* from a regular TLB entry
|
|
* flush, and thus you'd need more than just some range expansion..
|
|
*
|
|
* So if we ever find an architecture
|
|
* that would want something that odd, I think it is up to that
|
|
* architecture to do its own odd thing, not cause pain for others
|
|
* http://lkml.kernel.org/r/CA+55aFzBggoXtNXQeng5d_mRoDnaMBE5Y+URs+PHR67nUpMtaw@mail.gmail.com
|
|
*
|
|
* For now w.r.t page table cache, mark the range_size as PAGE_SIZE
|
|
*/
|
|
|
|
#define pte_free_tlb(tlb, ptep, address) \
|
|
do { \
|
|
__tlb_adjust_range(tlb, address, PAGE_SIZE); \
|
|
__pte_free_tlb(tlb, ptep, address); \
|
|
} while (0)
|
|
|
|
#define pmd_free_tlb(tlb, pmdp, address) \
|
|
do { \
|
|
__tlb_adjust_range(tlb, address, PAGE_SIZE); \
|
|
__pmd_free_tlb(tlb, pmdp, address); \
|
|
} while (0)
|
|
|
|
#ifndef __ARCH_HAS_4LEVEL_HACK
|
|
#define pud_free_tlb(tlb, pudp, address) \
|
|
do { \
|
|
__tlb_adjust_range(tlb, address, PAGE_SIZE); \
|
|
__pud_free_tlb(tlb, pudp, address); \
|
|
} while (0)
|
|
#endif
|
|
|
|
#ifndef __ARCH_HAS_5LEVEL_HACK
|
|
#define p4d_free_tlb(tlb, pudp, address) \
|
|
do { \
|
|
__tlb_adjust_range(tlb, address, PAGE_SIZE); \
|
|
__p4d_free_tlb(tlb, pudp, address); \
|
|
} while (0)
|
|
#endif
|
|
|
|
#define tlb_migrate_finish(mm) do {} while (0)
|
|
|
|
#endif /* _ASM_GENERIC__TLB_H */
|