AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-24 01:24:30 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
ece8ea7bfa
linux_dsm_epyc7002/drivers/regulator/bd71837-regulator.c
Matti Vaittinen 410e8b4f5c
regulator: bd71837: adobt MFD changes to regulator driver 
MFD part for bd71837 was changed during the review. Clean regulator part to
match changed MFD:
- renamed header file => fix include
- remove unused platdata as also type definition was removed
- Kconfig option for MFD part was changed => fix depends on clause
- Rename Kconfig option for regulators
  As Kconfig option for regulators gets now used (when dependency to MFD is
  satisfied) change it so that it won't require new change when support for
  bd71847 is added.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-30 14:24:20 +01:00

627 lines
18 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
// Copyright (C) 2018 ROHM Semiconductors
// bd71837-regulator.c ROHM BD71837MWV regulator driver
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mfd/rohm-bd718x7.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/slab.h>
struct bd71837_pmic {
struct regulator_desc descs[BD71837_REGULATOR_CNT];
struct bd71837 *mfd;
struct platform_device *pdev;
struct regulator_dev *rdev[BD71837_REGULATOR_CNT];
};
/*
* BUCK1/2/3/4
* BUCK1RAMPRATE[1:0] BUCK1 DVS ramp rate setting
* 00: 10.00mV/usec 10mV 1uS
* 01: 5.00mV/usec 10mV 2uS
* 10: 2.50mV/usec 10mV 4uS
* 11: 1.25mV/usec 10mV 8uS
*/
static int bd71837_buck1234_set_ramp_delay(struct regulator_dev *rdev,
int ramp_delay)
{
struct bd71837_pmic *pmic = rdev_get_drvdata(rdev);
struct bd71837 *mfd = pmic->mfd;
int id = rdev->desc->id;
unsigned int ramp_value = BUCK_RAMPRATE_10P00MV;
dev_dbg(&pmic->pdev->dev, "Buck[%d] Set Ramp = %d\n", id + 1,
ramp_delay);
switch (ramp_delay) {
case 1 ... 1250:
ramp_value = BUCK_RAMPRATE_1P25MV;
break;
case 1251 ... 2500:
ramp_value = BUCK_RAMPRATE_2P50MV;
break;
case 2501 ... 5000:
ramp_value = BUCK_RAMPRATE_5P00MV;
break;
case 5001 ... 10000:
ramp_value = BUCK_RAMPRATE_10P00MV;
break;
default:
ramp_value = BUCK_RAMPRATE_10P00MV;
dev_err(&pmic->pdev->dev,
"%s: ramp_delay: %d not supported, setting 10000mV//us\n",
rdev->desc->name, ramp_delay);
}
return regmap_update_bits(mfd->regmap, BD71837_REG_BUCK1_CTRL + id,
BUCK_RAMPRATE_MASK, ramp_value << 6);
}
/* Bucks 1 to 4 support DVS. PWM mode is used when voltage is changed.
* Bucks 5 to 8 and LDOs can use PFM and must be disabled when voltage
* is changed. Hence we return -EBUSY for these if voltage is changed
* when BUCK/LDO is enabled.
*/
static int bd71837_set_voltage_sel_restricted(struct regulator_dev *rdev,
unsigned int sel)
{
if (regulator_is_enabled_regmap(rdev))
return -EBUSY;
return regulator_set_voltage_sel_regmap(rdev, sel);
}
static struct regulator_ops bd71837_ldo_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_linear_range,
.set_voltage_sel = bd71837_set_voltage_sel_restricted,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
};
static struct regulator_ops bd71837_ldo_regulator_nolinear_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_table,
.set_voltage_sel = bd71837_set_voltage_sel_restricted,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
};
static struct regulator_ops bd71837_buck_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_linear_range,
.set_voltage_sel = bd71837_set_voltage_sel_restricted,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
};
static struct regulator_ops bd71837_buck_regulator_nolinear_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_table,
.set_voltage_sel = bd71837_set_voltage_sel_restricted,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
};
static struct regulator_ops bd71837_buck1234_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_linear_range,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = bd71837_buck1234_set_ramp_delay,
};
/*
* BUCK1/2/3/4
* 0.70 to 1.30V (10mV step)
*/
static const struct regulator_linear_range bd71837_buck1234_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(700000, 0x00, 0x3C, 10000),
REGULATOR_LINEAR_RANGE(1300000, 0x3D, 0x3F, 0),
};
/*
* BUCK5
* 0.9V to 1.35V ()
*/
static const struct regulator_linear_range bd71837_buck5_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000),
REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000),
REGULATOR_LINEAR_RANGE(1200000, 0x06, 0x07, 150000),
};
/*
* BUCK6
* 3.0V to 3.3V (step 100mV)
*/
static const struct regulator_linear_range bd71837_buck6_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000),
};
/*
* BUCK7
* 000 = 1.605V
* 001 = 1.695V
* 010 = 1.755V
* 011 = 1.8V (Initial)
* 100 = 1.845V
* 101 = 1.905V
* 110 = 1.95V
* 111 = 1.995V
*/
static const unsigned int buck_7_volts[] = {
1605000, 1695000, 1755000, 1800000, 1845000, 1905000, 1950000, 1995000
};
/*
* BUCK8
* 0.8V to 1.40V (step 10mV)
*/
static const struct regulator_linear_range bd71837_buck8_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0x00, 0x3C, 10000),
REGULATOR_LINEAR_RANGE(1400000, 0x3D, 0x3F, 0),
};
/*
* LDO1
* 3.0 to 3.3V (100mV step)
*/
static const struct regulator_linear_range bd71837_ldo1_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000),
};
/*
* LDO2
* 0.8 or 0.9V
*/
static const unsigned int ldo_2_volts[] = {
900000, 800000
};
/*
* LDO3
* 1.8 to 3.3V (100mV step)
*/
static const struct regulator_linear_range bd71837_ldo3_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
};
/*
* LDO4
* 0.9 to 1.8V (100mV step)
*/
static const struct regulator_linear_range bd71837_ldo4_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000),
REGULATOR_LINEAR_RANGE(1800000, 0x0A, 0x0F, 0),
};
/*
* LDO5
* 1.8 to 3.3V (100mV step)
*/
static const struct regulator_linear_range bd71837_ldo5_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
};
/*
* LDO6
* 0.9 to 1.8V (100mV step)
*/
static const struct regulator_linear_range bd71837_ldo6_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000),
REGULATOR_LINEAR_RANGE(1800000, 0x0A, 0x0F, 0),
};
/*
* LDO7
* 1.8 to 3.3V (100mV step)
*/
static const struct regulator_linear_range bd71837_ldo7_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
};
static const struct regulator_desc bd71837_regulators[] = {
{
.name = "buck1",
.of_match = of_match_ptr("BUCK1"),
.regulators_node = of_match_ptr("regulators"),
.id = BD71837_BUCK1,
.ops = &bd71837_buck1234_regulator_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = BD71837_BUCK1_VOLTAGE_NUM,
.linear_ranges = bd71837_buck1234_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges),
.vsel_reg = BD71837_REG_BUCK1_VOLT_RUN,
.vsel_mask = BUCK1_RUN_MASK,
.enable_reg = BD71837_REG_BUCK1_CTRL,
.enable_mask = BD71837_BUCK_EN,
.owner = THIS_MODULE,
},
{
.name = "buck2",
.of_match = of_match_ptr("BUCK2"),
.regulators_node = of_match_ptr("regulators"),
.id = BD71837_BUCK2,
.ops = &bd71837_buck1234_regulator_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = BD71837_BUCK2_VOLTAGE_NUM,
.linear_ranges = bd71837_buck1234_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges),
.vsel_reg = BD71837_REG_BUCK2_VOLT_RUN,
.vsel_mask = BUCK2_RUN_MASK,
.enable_reg = BD71837_REG_BUCK2_CTRL,
.enable_mask = BD71837_BUCK_EN,
.owner = THIS_MODULE,
},
{
.name = "buck3",
.of_match = of_match_ptr("BUCK3"),
.regulators_node = of_match_ptr("regulators"),
.id = BD71837_BUCK3,
.ops = &bd71837_buck1234_regulator_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = BD71837_BUCK3_VOLTAGE_NUM,
.linear_ranges = bd71837_buck1234_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges),
.vsel_reg = BD71837_REG_BUCK3_VOLT_RUN,
.vsel_mask = BUCK3_RUN_MASK,
.enable_reg = BD71837_REG_BUCK3_CTRL,
.enable_mask = BD71837_BUCK_EN,
.owner = THIS_MODULE,
},
{
.name = "buck4",
.of_match = of_match_ptr("BUCK4"),
.regulators_node = of_match_ptr("regulators"),
.id = BD71837_BUCK4,
.ops = &bd71837_buck1234_regulator_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = BD71837_BUCK4_VOLTAGE_NUM,
.linear_ranges = bd71837_buck1234_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges),
.vsel_reg = BD71837_REG_BUCK4_VOLT_RUN,
.vsel_mask = BUCK4_RUN_MASK,
.enable_reg = BD71837_REG_BUCK4_CTRL,
.enable_mask = BD71837_BUCK_EN,
.owner = THIS_MODULE,
},
{
.name = "buck5",
.of_match = of_match_ptr("BUCK5"),
.regulators_node = of_match_ptr("regulators"),
.id = BD71837_BUCK5,
.ops = &bd71837_buck_regulator_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = BD71837_BUCK5_VOLTAGE_NUM,
.linear_ranges = bd71837_buck5_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(bd71837_buck5_voltage_ranges),
.vsel_reg = BD71837_REG_BUCK5_VOLT,
.vsel_mask = BUCK5_MASK,
.enable_reg = BD71837_REG_BUCK5_CTRL,
.enable_mask = BD71837_BUCK_EN,
.owner = THIS_MODULE,
},
{
.name = "buck6",
.of_match = of_match_ptr("BUCK6"),
.regulators_node = of_match_ptr("regulators"),
.id = BD71837_BUCK6,
.ops = &bd71837_buck_regulator_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = BD71837_BUCK6_VOLTAGE_NUM,
.linear_ranges = bd71837_buck6_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(bd71837_buck6_voltage_ranges),
.vsel_reg = BD71837_REG_BUCK6_VOLT,
.vsel_mask = BUCK6_MASK,
.enable_reg = BD71837_REG_BUCK6_CTRL,
.enable_mask = BD71837_BUCK_EN,
.owner = THIS_MODULE,
},
{
.name = "buck7",
.of_match = of_match_ptr("BUCK7"),
.regulators_node = of_match_ptr("regulators"),
.id = BD71837_BUCK7,
.ops = &bd71837_buck_regulator_nolinear_ops,
.type = REGULATOR_VOLTAGE,
.volt_table = &buck_7_volts[0],
.n_voltages = ARRAY_SIZE(buck_7_volts),
.vsel_reg = BD71837_REG_BUCK7_VOLT,
.vsel_mask = BUCK7_MASK,
.enable_reg = BD71837_REG_BUCK7_CTRL,
.enable_mask = BD71837_BUCK_EN,
.owner = THIS_MODULE,
},
{
.name = "buck8",
.of_match = of_match_ptr("BUCK8"),
.regulators_node = of_match_ptr("regulators"),
.id = BD71837_BUCK8,
.ops = &bd71837_buck_regulator_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = BD71837_BUCK8_VOLTAGE_NUM,
.linear_ranges = bd71837_buck8_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(bd71837_buck8_voltage_ranges),
.vsel_reg = BD71837_REG_BUCK8_VOLT,
.vsel_mask = BUCK8_MASK,
.enable_reg = BD71837_REG_BUCK8_CTRL,
.enable_mask = BD71837_BUCK_EN,
.owner = THIS_MODULE,
},
{
.name = "ldo1",
.of_match = of_match_ptr("LDO1"),
.regulators_node = of_match_ptr("regulators"),
.id = BD71837_LDO1,
.ops = &bd71837_ldo_regulator_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = BD71837_LDO1_VOLTAGE_NUM,
.linear_ranges = bd71837_ldo1_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(bd71837_ldo1_voltage_ranges),
.vsel_reg = BD71837_REG_LDO1_VOLT,
.vsel_mask = LDO1_MASK,
.enable_reg = BD71837_REG_LDO1_VOLT,
.enable_mask = BD71837_LDO_EN,
.owner = THIS_MODULE,
},
{
.name = "ldo2",
.of_match = of_match_ptr("LDO2"),
.regulators_node = of_match_ptr("regulators"),
.id = BD71837_LDO2,
.ops = &bd71837_ldo_regulator_nolinear_ops,
.type = REGULATOR_VOLTAGE,
.volt_table = &ldo_2_volts[0],
.vsel_reg = BD71837_REG_LDO2_VOLT,
.vsel_mask = LDO2_MASK,
.n_voltages = ARRAY_SIZE(ldo_2_volts),
.n_voltages = BD71837_LDO2_VOLTAGE_NUM,
.enable_reg = BD71837_REG_LDO2_VOLT,
.enable_mask = BD71837_LDO_EN,
.owner = THIS_MODULE,
},
{
.name = "ldo3",
.of_match = of_match_ptr("LDO3"),
.regulators_node = of_match_ptr("regulators"),
.id = BD71837_LDO3,
.ops = &bd71837_ldo_regulator_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = BD71837_LDO3_VOLTAGE_NUM,
.linear_ranges = bd71837_ldo3_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(bd71837_ldo3_voltage_ranges),
.vsel_reg = BD71837_REG_LDO3_VOLT,
.vsel_mask = LDO3_MASK,
.enable_reg = BD71837_REG_LDO3_VOLT,
.enable_mask = BD71837_LDO_EN,
.owner = THIS_MODULE,
},
{
.name = "ldo4",
.of_match = of_match_ptr("LDO4"),
.regulators_node = of_match_ptr("regulators"),
.id = BD71837_LDO4,
.ops = &bd71837_ldo_regulator_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = BD71837_LDO4_VOLTAGE_NUM,
.linear_ranges = bd71837_ldo4_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(bd71837_ldo4_voltage_ranges),
.vsel_reg = BD71837_REG_LDO4_VOLT,
.vsel_mask = LDO4_MASK,
.enable_reg = BD71837_REG_LDO4_VOLT,
.enable_mask = BD71837_LDO_EN,
.owner = THIS_MODULE,
},
{
.name = "ldo5",
.of_match = of_match_ptr("LDO5"),
.regulators_node = of_match_ptr("regulators"),
.id = BD71837_LDO5,
.ops = &bd71837_ldo_regulator_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = BD71837_LDO5_VOLTAGE_NUM,
.linear_ranges = bd71837_ldo5_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(bd71837_ldo5_voltage_ranges),
/* LDO5 is supplied by buck6 */
.supply_name = "buck6",
.vsel_reg = BD71837_REG_LDO5_VOLT,
.vsel_mask = LDO5_MASK,
.enable_reg = BD71837_REG_LDO5_VOLT,
.enable_mask = BD71837_LDO_EN,
.owner = THIS_MODULE,
},
{
.name = "ldo6",
.of_match = of_match_ptr("LDO6"),
.regulators_node = of_match_ptr("regulators"),
.id = BD71837_LDO6,
.ops = &bd71837_ldo_regulator_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = BD71837_LDO6_VOLTAGE_NUM,
.linear_ranges = bd71837_ldo6_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(bd71837_ldo6_voltage_ranges),
/* LDO6 is supplied by buck7 */
.supply_name = "buck7",
.vsel_reg = BD71837_REG_LDO6_VOLT,
.vsel_mask = LDO6_MASK,
.enable_reg = BD71837_REG_LDO6_VOLT,
.enable_mask = BD71837_LDO_EN,
.owner = THIS_MODULE,
},
{
.name = "ldo7",
.of_match = of_match_ptr("LDO7"),
.regulators_node = of_match_ptr("regulators"),
.id = BD71837_LDO7,
.ops = &bd71837_ldo_regulator_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = BD71837_LDO7_VOLTAGE_NUM,
.linear_ranges = bd71837_ldo7_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(bd71837_ldo7_voltage_ranges),
.vsel_reg = BD71837_REG_LDO7_VOLT,
.vsel_mask = LDO7_MASK,
.enable_reg = BD71837_REG_LDO7_VOLT,
.enable_mask = BD71837_LDO_EN,
.owner = THIS_MODULE,
},
};
struct reg_init {
unsigned int reg;
unsigned int mask;
};
static int bd71837_probe(struct platform_device *pdev)
{
struct bd71837_pmic *pmic;
struct regulator_config config = { 0 };
struct reg_init pmic_regulator_inits[] = {
{
.reg = BD71837_REG_BUCK1_CTRL,
.mask = BD71837_BUCK_SEL,
}, {
.reg = BD71837_REG_BUCK2_CTRL,
.mask = BD71837_BUCK_SEL,
}, {
.reg = BD71837_REG_BUCK3_CTRL,
.mask = BD71837_BUCK_SEL,
}, {
.reg = BD71837_REG_BUCK4_CTRL,
.mask = BD71837_BUCK_SEL,
}, {
.reg = BD71837_REG_BUCK5_CTRL,
.mask = BD71837_BUCK_SEL,
}, {
.reg = BD71837_REG_BUCK6_CTRL,
.mask = BD71837_BUCK_SEL,
}, {
.reg = BD71837_REG_BUCK7_CTRL,
.mask = BD71837_BUCK_SEL,
}, {
.reg = BD71837_REG_BUCK8_CTRL,
.mask = BD71837_BUCK_SEL,
}, {
.reg = BD71837_REG_LDO1_VOLT,
.mask = BD71837_LDO_SEL,
}, {
.reg = BD71837_REG_LDO2_VOLT,
.mask = BD71837_LDO_SEL,
}, {
.reg = BD71837_REG_LDO3_VOLT,
.mask = BD71837_LDO_SEL,
}, {
.reg = BD71837_REG_LDO4_VOLT,
.mask = BD71837_LDO_SEL,
}, {
.reg = BD71837_REG_LDO5_VOLT,
.mask = BD71837_LDO_SEL,
}, {
.reg = BD71837_REG_LDO6_VOLT,
.mask = BD71837_LDO_SEL,
}, {
.reg = BD71837_REG_LDO7_VOLT,
.mask = BD71837_LDO_SEL,
}
};
int i, err;
pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
if (!pmic)
return -ENOMEM;
memcpy(pmic->descs, bd71837_regulators, sizeof(pmic->descs));
pmic->pdev = pdev;
pmic->mfd = dev_get_drvdata(pdev->dev.parent);
if (!pmic->mfd) {
dev_err(&pdev->dev, "No MFD driver data\n");
err = -EINVAL;
goto err;
}
platform_set_drvdata(pdev, pmic);
/* Register LOCK release */
err = regmap_update_bits(pmic->mfd->regmap, BD71837_REG_REGLOCK,
(REGLOCK_PWRSEQ | REGLOCK_VREG), 0);
if (err) {
dev_err(&pmic->pdev->dev, "Failed to unlock PMIC (%d)\n", err);
goto err;
} else {
dev_dbg(&pmic->pdev->dev, "Unlocked lock register 0x%x\n",
BD71837_REG_REGLOCK);
}
for (i = 0; i < ARRAY_SIZE(pmic_regulator_inits); i++) {
struct regulator_desc *desc;
struct regulator_dev *rdev;
desc = &pmic->descs[i];
config.dev = pdev->dev.parent;
config.driver_data = pmic;
config.regmap = pmic->mfd->regmap;
rdev = devm_regulator_register(&pdev->dev, desc, &config);
if (IS_ERR(rdev)) {
dev_err(pmic->mfd->dev,
"failed to register %s regulator\n",
desc->name);
err = PTR_ERR(rdev);
goto err;
}
/* Regulator register gets the regulator constraints and
* applies them (set_machine_constraints). This should have
* turned the control register(s) to correct values and we
* can now switch the control from PMIC state machine to the
* register interface
*/
err = regmap_update_bits(pmic->mfd->regmap,
pmic_regulator_inits[i].reg,
pmic_regulator_inits[i].mask,
0xFFFFFFFF);
if (err) {
dev_err(&pmic->pdev->dev,
"Failed to write BUCK/LDO SEL bit for (%s)\n",
desc->name);
goto err;
}
pmic->rdev[i] = rdev;
}
err:
return err;
}
static struct platform_driver bd71837_regulator = {
.driver = {
.name = "bd71837-pmic",
},
.probe = bd71837_probe,
};
module_platform_driver(bd71837_regulator);
MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
MODULE_DESCRIPTION("BD71837 voltage regulator driver");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink