mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-22 11:58:21 +07:00
6f3710f1f6
Accessing the NOR flash memory from the kernel will disrupt CPU sleep/ idles states and CPU hotplugging. We need to disable this DT node by default. Setups that want to access the flash can modify this entry to enable the flash again but also ensuring to disable CPU idle states and CPU hotplug. The platform firmware assumes the flash is always in read mode while Linux kernel driver leaves NOR flash in "read id" mode after initialization. If it gets used actively, it can be in some other state. So far we had not seen this issue as the NOR flash drivers in kernel were not enabled by default. However it was enable in multi_v7 config by Commit5f068190cc("ARM: multi_v7_defconfig: Enable support for CFI NOR FLASH") So, let's mark the NOR flash disabled so that the platform can boot again. This based on: Commit980bbff018("ARM64: juno: disable NOR flash node by default") Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
692 lines
15 KiB
Plaintext
692 lines
15 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* ARM Ltd. Versatile Express
|
|
*
|
|
* CoreTile Express A15x2 A7x3
|
|
* Cortex-A15_A7 MPCore (V2P-CA15_A7)
|
|
*
|
|
* HBI-0249A
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "vexpress-v2m-rs1.dtsi"
|
|
|
|
/ {
|
|
model = "V2P-CA15_CA7";
|
|
arm,hbi = <0x249>;
|
|
arm,vexpress,site = <0xf>;
|
|
compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress";
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
chosen { };
|
|
|
|
aliases {
|
|
serial0 = &v2m_serial0;
|
|
serial1 = &v2m_serial1;
|
|
serial2 = &v2m_serial2;
|
|
serial3 = &v2m_serial3;
|
|
i2c0 = &v2m_i2c_dvi;
|
|
i2c1 = &v2m_i2c_pcie;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <0>;
|
|
cci-control-port = <&cci_control1>;
|
|
cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
|
|
capacity-dmips-mhz = <1024>;
|
|
dynamic-power-coefficient = <990>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <1>;
|
|
cci-control-port = <&cci_control1>;
|
|
cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
|
|
capacity-dmips-mhz = <1024>;
|
|
dynamic-power-coefficient = <990>;
|
|
};
|
|
|
|
cpu2: cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x100>;
|
|
cci-control-port = <&cci_control2>;
|
|
cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
|
|
capacity-dmips-mhz = <516>;
|
|
dynamic-power-coefficient = <133>;
|
|
};
|
|
|
|
cpu3: cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x101>;
|
|
cci-control-port = <&cci_control2>;
|
|
cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
|
|
capacity-dmips-mhz = <516>;
|
|
dynamic-power-coefficient = <133>;
|
|
};
|
|
|
|
cpu4: cpu@4 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x102>;
|
|
cci-control-port = <&cci_control2>;
|
|
cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
|
|
capacity-dmips-mhz = <516>;
|
|
dynamic-power-coefficient = <133>;
|
|
};
|
|
|
|
idle-states {
|
|
CLUSTER_SLEEP_BIG: cluster-sleep-big {
|
|
compatible = "arm,idle-state";
|
|
local-timer-stop;
|
|
entry-latency-us = <1000>;
|
|
exit-latency-us = <700>;
|
|
min-residency-us = <2000>;
|
|
};
|
|
|
|
CLUSTER_SLEEP_LITTLE: cluster-sleep-little {
|
|
compatible = "arm,idle-state";
|
|
local-timer-stop;
|
|
entry-latency-us = <1000>;
|
|
exit-latency-us = <500>;
|
|
min-residency-us = <2500>;
|
|
};
|
|
};
|
|
};
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0 0x80000000 0 0x40000000>;
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
/* Chipselect 2 is physically at 0x18000000 */
|
|
vram: vram@18000000 {
|
|
/* 8 MB of designated video RAM */
|
|
compatible = "shared-dma-pool";
|
|
reg = <0 0x18000000 0 0x00800000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
wdt@2a490000 {
|
|
compatible = "arm,sp805", "arm,primecell";
|
|
reg = <0 0x2a490000 0 0x1000>;
|
|
interrupts = <0 98 4>;
|
|
clocks = <&oscclk6a>, <&oscclk6a>;
|
|
clock-names = "wdogclk", "apb_pclk";
|
|
};
|
|
|
|
hdlcd@2b000000 {
|
|
compatible = "arm,hdlcd";
|
|
reg = <0 0x2b000000 0 0x1000>;
|
|
interrupts = <0 85 4>;
|
|
clocks = <&hdlcd_clk>;
|
|
clock-names = "pxlclk";
|
|
};
|
|
|
|
memory-controller@2b0a0000 {
|
|
compatible = "arm,pl341", "arm,primecell";
|
|
reg = <0 0x2b0a0000 0 0x1000>;
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
gic: interrupt-controller@2c001000 {
|
|
compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <0>;
|
|
interrupt-controller;
|
|
reg = <0 0x2c001000 0 0x1000>,
|
|
<0 0x2c002000 0 0x2000>,
|
|
<0 0x2c004000 0 0x2000>,
|
|
<0 0x2c006000 0 0x2000>;
|
|
interrupts = <1 9 0xf04>;
|
|
};
|
|
|
|
cci@2c090000 {
|
|
compatible = "arm,cci-400";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0 0x2c090000 0 0x1000>;
|
|
ranges = <0x0 0x0 0x2c090000 0x10000>;
|
|
|
|
cci_control1: slave-if@4000 {
|
|
compatible = "arm,cci-400-ctrl-if";
|
|
interface-type = "ace";
|
|
reg = <0x4000 0x1000>;
|
|
};
|
|
|
|
cci_control2: slave-if@5000 {
|
|
compatible = "arm,cci-400-ctrl-if";
|
|
interface-type = "ace";
|
|
reg = <0x5000 0x1000>;
|
|
};
|
|
|
|
pmu@9000 {
|
|
compatible = "arm,cci-400-pmu,r0";
|
|
reg = <0x9000 0x5000>;
|
|
interrupts = <0 105 4>,
|
|
<0 101 4>,
|
|
<0 102 4>,
|
|
<0 103 4>,
|
|
<0 104 4>;
|
|
};
|
|
};
|
|
|
|
memory-controller@7ffd0000 {
|
|
compatible = "arm,pl354", "arm,primecell";
|
|
reg = <0 0x7ffd0000 0 0x1000>;
|
|
interrupts = <0 86 4>,
|
|
<0 87 4>;
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
dma@7ff00000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0 0x7ff00000 0 0x1000>;
|
|
interrupts = <0 92 4>,
|
|
<0 88 4>,
|
|
<0 89 4>,
|
|
<0 90 4>,
|
|
<0 91 4>;
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
scc@7fff0000 {
|
|
compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
|
|
reg = <0 0x7fff0000 0 0x1000>;
|
|
interrupts = <0 95 4>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <1 13 0xf08>,
|
|
<1 14 0xf08>,
|
|
<1 11 0xf08>,
|
|
<1 10 0xf08>;
|
|
};
|
|
|
|
pmu-a15 {
|
|
compatible = "arm,cortex-a15-pmu";
|
|
interrupts = <0 68 4>,
|
|
<0 69 4>;
|
|
interrupt-affinity = <&cpu0>,
|
|
<&cpu1>;
|
|
};
|
|
|
|
pmu-a7 {
|
|
compatible = "arm,cortex-a7-pmu";
|
|
interrupts = <0 128 4>,
|
|
<0 129 4>,
|
|
<0 130 4>;
|
|
interrupt-affinity = <&cpu2>,
|
|
<&cpu3>,
|
|
<&cpu4>;
|
|
};
|
|
|
|
oscclk6a: oscclk6a {
|
|
/* Reference 24MHz clock */
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "oscclk6a";
|
|
};
|
|
|
|
dcc {
|
|
compatible = "arm,vexpress,config-bus";
|
|
arm,vexpress,config-bridge = <&v2m_sysreg>;
|
|
|
|
oscclk0 {
|
|
/* A15 PLL 0 reference clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 0>;
|
|
freq-range = <17000000 50000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "oscclk0";
|
|
};
|
|
|
|
oscclk1 {
|
|
/* A15 PLL 1 reference clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 1>;
|
|
freq-range = <17000000 50000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "oscclk1";
|
|
};
|
|
|
|
oscclk2 {
|
|
/* A7 PLL 0 reference clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 2>;
|
|
freq-range = <17000000 50000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "oscclk2";
|
|
};
|
|
|
|
oscclk3 {
|
|
/* A7 PLL 1 reference clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 3>;
|
|
freq-range = <17000000 50000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "oscclk3";
|
|
};
|
|
|
|
oscclk4 {
|
|
/* External AXI master clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 4>;
|
|
freq-range = <20000000 40000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "oscclk4";
|
|
};
|
|
|
|
hdlcd_clk: oscclk5 {
|
|
/* HDLCD PLL reference clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 5>;
|
|
freq-range = <23750000 165000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "oscclk5";
|
|
};
|
|
|
|
smbclk: oscclk6 {
|
|
/* Static memory controller clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 6>;
|
|
freq-range = <20000000 40000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "oscclk6";
|
|
};
|
|
|
|
oscclk7 {
|
|
/* SYS PLL reference clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 7>;
|
|
freq-range = <17000000 50000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "oscclk7";
|
|
};
|
|
|
|
oscclk8 {
|
|
/* DDR2 PLL reference clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 8>;
|
|
freq-range = <20000000 50000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "oscclk8";
|
|
};
|
|
|
|
volt-a15 {
|
|
/* A15 CPU core voltage */
|
|
compatible = "arm,vexpress-volt";
|
|
arm,vexpress-sysreg,func = <2 0>;
|
|
regulator-name = "A15 Vcore";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-always-on;
|
|
label = "A15 Vcore";
|
|
};
|
|
|
|
volt-a7 {
|
|
/* A7 CPU core voltage */
|
|
compatible = "arm,vexpress-volt";
|
|
arm,vexpress-sysreg,func = <2 1>;
|
|
regulator-name = "A7 Vcore";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-always-on;
|
|
label = "A7 Vcore";
|
|
};
|
|
|
|
amp-a15 {
|
|
/* Total current for the two A15 cores */
|
|
compatible = "arm,vexpress-amp";
|
|
arm,vexpress-sysreg,func = <3 0>;
|
|
label = "A15 Icore";
|
|
};
|
|
|
|
amp-a7 {
|
|
/* Total current for the three A7 cores */
|
|
compatible = "arm,vexpress-amp";
|
|
arm,vexpress-sysreg,func = <3 1>;
|
|
label = "A7 Icore";
|
|
};
|
|
|
|
temp-dcc {
|
|
/* DCC internal temperature */
|
|
compatible = "arm,vexpress-temp";
|
|
arm,vexpress-sysreg,func = <4 0>;
|
|
label = "DCC";
|
|
};
|
|
|
|
power-a15 {
|
|
/* Total power for the two A15 cores */
|
|
compatible = "arm,vexpress-power";
|
|
arm,vexpress-sysreg,func = <12 0>;
|
|
label = "A15 Pcore";
|
|
};
|
|
|
|
power-a7 {
|
|
/* Total power for the three A7 cores */
|
|
compatible = "arm,vexpress-power";
|
|
arm,vexpress-sysreg,func = <12 1>;
|
|
label = "A7 Pcore";
|
|
};
|
|
|
|
energy-a15 {
|
|
/* Total energy for the two A15 cores */
|
|
compatible = "arm,vexpress-energy";
|
|
arm,vexpress-sysreg,func = <13 0>, <13 1>;
|
|
label = "A15 Jcore";
|
|
};
|
|
|
|
energy-a7 {
|
|
/* Total energy for the three A7 cores */
|
|
compatible = "arm,vexpress-energy";
|
|
arm,vexpress-sysreg,func = <13 2>, <13 3>;
|
|
label = "A7 Jcore";
|
|
};
|
|
};
|
|
|
|
etb@20010000 {
|
|
compatible = "arm,coresight-etb10", "arm,primecell";
|
|
reg = <0 0x20010000 0 0x1000>;
|
|
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
in-ports {
|
|
port {
|
|
etb_in_port: endpoint {
|
|
remote-endpoint = <&replicator_out_port0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu@20030000 {
|
|
compatible = "arm,coresight-tpiu", "arm,primecell";
|
|
reg = <0 0x20030000 0 0x1000>;
|
|
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
in-ports {
|
|
port {
|
|
tpiu_in_port: endpoint {
|
|
remote-endpoint = <&replicator_out_port1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
replicator {
|
|
/* non-configurable replicators don't show up on the
|
|
* AMBA bus. As such no need to add "arm,primecell".
|
|
*/
|
|
compatible = "arm,coresight-static-replicator";
|
|
|
|
out-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
replicator_out_port0: endpoint {
|
|
remote-endpoint = <&etb_in_port>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
replicator_out_port1: endpoint {
|
|
remote-endpoint = <&tpiu_in_port>;
|
|
};
|
|
};
|
|
};
|
|
|
|
in-ports {
|
|
port {
|
|
replicator_in_port0: endpoint {
|
|
remote-endpoint = <&funnel_out_port0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@20040000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0 0x20040000 0 0x1000>;
|
|
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
out-ports {
|
|
port {
|
|
funnel_out_port0: endpoint {
|
|
remote-endpoint =
|
|
<&replicator_in_port0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
funnel_in_port0: endpoint {
|
|
remote-endpoint = <&ptm0_out_port>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
funnel_in_port1: endpoint {
|
|
remote-endpoint = <&ptm1_out_port>;
|
|
};
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
funnel_in_port2: endpoint {
|
|
remote-endpoint = <&etm0_out_port>;
|
|
};
|
|
};
|
|
|
|
/* Input port #3 is for ITM, not supported here */
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
funnel_in_port4: endpoint {
|
|
remote-endpoint = <&etm1_out_port>;
|
|
};
|
|
};
|
|
|
|
port@5 {
|
|
reg = <5>;
|
|
funnel_in_port5: endpoint {
|
|
remote-endpoint = <&etm2_out_port>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ptm@2201c000 {
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
reg = <0 0x2201c000 0 0x1000>;
|
|
|
|
cpu = <&cpu0>;
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
out-ports {
|
|
port {
|
|
ptm0_out_port: endpoint {
|
|
remote-endpoint = <&funnel_in_port0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ptm@2201d000 {
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
reg = <0 0x2201d000 0 0x1000>;
|
|
|
|
cpu = <&cpu1>;
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
out-ports {
|
|
port {
|
|
ptm1_out_port: endpoint {
|
|
remote-endpoint = <&funnel_in_port1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@2203c000 {
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
reg = <0 0x2203c000 0 0x1000>;
|
|
|
|
cpu = <&cpu2>;
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
out-ports {
|
|
port {
|
|
etm0_out_port: endpoint {
|
|
remote-endpoint = <&funnel_in_port2>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@2203d000 {
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
reg = <0 0x2203d000 0 0x1000>;
|
|
|
|
cpu = <&cpu3>;
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
out-ports {
|
|
port {
|
|
etm1_out_port: endpoint {
|
|
remote-endpoint = <&funnel_in_port4>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@2203e000 {
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
reg = <0 0x2203e000 0 0x1000>;
|
|
|
|
cpu = <&cpu4>;
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
out-ports {
|
|
port {
|
|
etm2_out_port: endpoint {
|
|
remote-endpoint = <&funnel_in_port5>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
smb: smb@8000000 {
|
|
compatible = "simple-bus";
|
|
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0 0x08000000 0x04000000>,
|
|
<1 0 0 0x14000000 0x04000000>,
|
|
<2 0 0 0x18000000 0x04000000>,
|
|
<3 0 0 0x1c000000 0x04000000>,
|
|
<4 0 0 0x0c000000 0x04000000>,
|
|
<5 0 0 0x10000000 0x04000000>;
|
|
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 63>;
|
|
interrupt-map = <0 0 0 &gic 0 0 4>,
|
|
<0 0 1 &gic 0 1 4>,
|
|
<0 0 2 &gic 0 2 4>,
|
|
<0 0 3 &gic 0 3 4>,
|
|
<0 0 4 &gic 0 4 4>,
|
|
<0 0 5 &gic 0 5 4>,
|
|
<0 0 6 &gic 0 6 4>,
|
|
<0 0 7 &gic 0 7 4>,
|
|
<0 0 8 &gic 0 8 4>,
|
|
<0 0 9 &gic 0 9 4>,
|
|
<0 0 10 &gic 0 10 4>,
|
|
<0 0 11 &gic 0 11 4>,
|
|
<0 0 12 &gic 0 12 4>,
|
|
<0 0 13 &gic 0 13 4>,
|
|
<0 0 14 &gic 0 14 4>,
|
|
<0 0 15 &gic 0 15 4>,
|
|
<0 0 16 &gic 0 16 4>,
|
|
<0 0 17 &gic 0 17 4>,
|
|
<0 0 18 &gic 0 18 4>,
|
|
<0 0 19 &gic 0 19 4>,
|
|
<0 0 20 &gic 0 20 4>,
|
|
<0 0 21 &gic 0 21 4>,
|
|
<0 0 22 &gic 0 22 4>,
|
|
<0 0 23 &gic 0 23 4>,
|
|
<0 0 24 &gic 0 24 4>,
|
|
<0 0 25 &gic 0 25 4>,
|
|
<0 0 26 &gic 0 26 4>,
|
|
<0 0 27 &gic 0 27 4>,
|
|
<0 0 28 &gic 0 28 4>,
|
|
<0 0 29 &gic 0 29 4>,
|
|
<0 0 30 &gic 0 30 4>,
|
|
<0 0 31 &gic 0 31 4>,
|
|
<0 0 32 &gic 0 32 4>,
|
|
<0 0 33 &gic 0 33 4>,
|
|
<0 0 34 &gic 0 34 4>,
|
|
<0 0 35 &gic 0 35 4>,
|
|
<0 0 36 &gic 0 36 4>,
|
|
<0 0 37 &gic 0 37 4>,
|
|
<0 0 38 &gic 0 38 4>,
|
|
<0 0 39 &gic 0 39 4>,
|
|
<0 0 40 &gic 0 40 4>,
|
|
<0 0 41 &gic 0 41 4>,
|
|
<0 0 42 &gic 0 42 4>;
|
|
};
|
|
|
|
site2: hsb@40000000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0x40000000 0x3fef0000>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 3>;
|
|
interrupt-map = <0 0 &gic 0 36 4>,
|
|
<0 1 &gic 0 37 4>,
|
|
<0 2 &gic 0 38 4>,
|
|
<0 3 &gic 0 39 4>;
|
|
};
|
|
};
|
|
|
|
&nor_flash {
|
|
/*
|
|
* Unfortunately, accessing the flash disturbs the CPU idle states
|
|
* (suspend) and CPU hotplug of this platform. For this reason, flash
|
|
* hardware access is disabled by default on this platform alone.
|
|
*/
|
|
status = "disabled";
|
|
};
|