AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-26 01:00:58 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
ecc46cfdad
linux_dsm_epyc7002/arch/arm/mach-omap2/board-h4.c
Tony Lindgren fe57ab0605 ARM: OMAP2: Remove legacy USB FS support 
The FS (Full Speed) USB controller is available on 2420 and 2430,
but not being used.

Out of the 2420 based boards only Nokia N8X0 are seeing active
development and they have external HS (High Speed) TUSB controller.
On omap 2430sdp there is MUSB HS controller, so there's no need
to use the legacy USB FS controller.

That leaves only H4 and Apollon boards that could use the FS USB
controller. As both H4 and Apollon boards are old proprietary
development boards, it's unlikely that we have any active
developers working on those boards using the USB.

So remove the FS USB support for omap2 machines. Patches are
welcome if somebody wants to instead fix it all up to the
current standards.

Cc: linux-usb@vger.kernel.org
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-04 00:57:22 -07:00

392 lines
9.5 KiB
C
Raw Blame History

/*
* linux/arch/arm/mach-omap2/board-h4.c
*
* Copyright (C) 2005 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
*
* Modified from mach-omap/omap1/board-generic.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/delay.h>
#include <linux/workqueue.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/input.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/input/matrix_keypad.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/board.h>
#include "common.h"
#include <plat/menelaus.h>
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include "mux.h"
#include "control.h"
#define H4_FLASH_CS 0
#define H4_SMC91X_CS 1
#define H4_ETHR_GPIO_IRQ 92
#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
static const uint32_t board_matrix_keys[] = {
KEY(0, 0, KEY_LEFT),
KEY(1, 0, KEY_RIGHT),
KEY(2, 0, KEY_A),
KEY(3, 0, KEY_B),
KEY(4, 0, KEY_C),
KEY(0, 1, KEY_DOWN),
KEY(1, 1, KEY_UP),
KEY(2, 1, KEY_E),
KEY(3, 1, KEY_F),
KEY(4, 1, KEY_G),
KEY(0, 2, KEY_ENTER),
KEY(1, 2, KEY_I),
KEY(2, 2, KEY_J),
KEY(3, 2, KEY_K),
KEY(4, 2, KEY_3),
KEY(0, 3, KEY_M),
KEY(1, 3, KEY_N),
KEY(2, 3, KEY_O),
KEY(3, 3, KEY_P),
KEY(4, 3, KEY_Q),
KEY(0, 4, KEY_R),
KEY(1, 4, KEY_4),
KEY(2, 4, KEY_T),
KEY(3, 4, KEY_U),
KEY(4, 4, KEY_ENTER),
KEY(0, 5, KEY_V),
KEY(1, 5, KEY_W),
KEY(2, 5, KEY_L),
KEY(3, 5, KEY_S),
KEY(4, 5, KEY_ENTER),
};
static const struct matrix_keymap_data board_keymap_data = {
.keymap = board_matrix_keys,
.keymap_size = ARRAY_SIZE(board_matrix_keys),
};
static unsigned int board_keypad_row_gpios[] = {
88, 89, 124, 11, 6, 96
};
static unsigned int board_keypad_col_gpios[] = {
90, 91, 100, 36, 12, 97, 98
};
static struct matrix_keypad_platform_data board_keypad_platform_data = {
.keymap_data = &board_keymap_data,
.row_gpios = board_keypad_row_gpios,
.num_row_gpios = ARRAY_SIZE(board_keypad_row_gpios),
.col_gpios = board_keypad_col_gpios,
.num_col_gpios = ARRAY_SIZE(board_keypad_col_gpios),
.active_low = 1,
.debounce_ms = 20,
.col_scan_delay_us = 5,
};
static struct platform_device board_keyboard = {
.name = "matrix-keypad",
.id = -1,
.dev = {
.platform_data = &board_keypad_platform_data,
},
};
static void __init board_mkp_init(void)
{
omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
if (omap_has_menelaus()) {
omap_mux_init_signal("sdrc_a14.gpio0",
OMAP_PULL_ENA | OMAP_PULL_UP);
omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
omap_mux_init_signal("gpio_98", 0);
board_keypad_row_gpios[5] = 0;
board_keypad_col_gpios[2] = 15;
board_keypad_col_gpios[6] = 18;
} else {
omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
omap_mux_init_signal("gpio_100", 0);
omap_mux_init_signal("gpio_98", 0);
}
omap_mux_init_signal("gpio_90", 0);
omap_mux_init_signal("gpio_91", 0);
omap_mux_init_signal("gpio_36", 0);
omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
omap_mux_init_signal("gpio_97", 0);
platform_device_register(&board_keyboard);
}
#else
static inline void board_mkp_init(void)
{
}
#endif
static struct mtd_partition h4_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
.name = "bootloader",
.offset = 0,
.size = SZ_128K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* bootloader params in the next sector */
{
.name = "params",
.offset = MTDPART_OFS_APPEND,
.size = SZ_128K,
.mask_flags = 0,
},
/* kernel */
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_2M,
.mask_flags = 0
},
/* file system */
{
.name = "filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0
}
};
static struct physmap_flash_data h4_flash_data = {
.width = 2,
.parts = h4_partitions,
.nr_parts = ARRAY_SIZE(h4_partitions),
};
static struct resource h4_flash_resource = {
.flags = IORESOURCE_MEM,
};
static struct platform_device h4_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &h4_flash_data,
},
.num_resources = 1,
.resource = &h4_flash_resource,
};
static struct platform_device *h4_devices[] __initdata = {
&h4_flash_device,
};
static struct panel_generic_dpi_data h4_panel_data = {
.name = "h4",
};
static struct omap_dss_device h4_lcd_device = {
.name = "lcd",
.driver_name = "generic_dpi_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 16,
.data = &h4_panel_data,
};
static struct omap_dss_device *h4_dss_devices[] = {
&h4_lcd_device,
};
static struct omap_dss_board_info h4_dss_data = {
.num_devices = ARRAY_SIZE(h4_dss_devices),
.devices = h4_dss_devices,
.default_device = &h4_lcd_device,
};
/* 2420 Sysboot setup (2430 is different) */
static u32 get_sysboot_value(void)
{
return (omap_ctrl_readl(OMAP24XX_CONTROL_STATUS) &
(OMAP2_SYSBOOT_5_MASK | OMAP2_SYSBOOT_4_MASK |
OMAP2_SYSBOOT_3_MASK | OMAP2_SYSBOOT_2_MASK |
OMAP2_SYSBOOT_1_MASK | OMAP2_SYSBOOT_0_MASK));
}
/* H4-2420's always used muxed mode, H4-2422's always use non-muxed
*
* Note: OMAP-GIT doesn't correctly do is_cpu_omap2422 and is_cpu_omap2423
* correctly. The macro needs to look at production_id not just hawkeye.
*/
static u32 is_gpmc_muxed(void)
{
u32 mux;
mux = get_sysboot_value();
if ((mux & 0xF) == 0xd)
return 1; /* NAND config (could be either) */
if (mux & 0x2) /* if mux'ed */
return 1;
else
return 0;
}
static inline void __init h4_init_debug(void)
{
int eth_cs;
unsigned long cs_mem_base;
unsigned int muxed, rate;
struct clk *gpmc_fck;
eth_cs = H4_SMC91X_CS;
gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */
if (IS_ERR(gpmc_fck)) {
WARN_ON(1);
return;
}
clk_enable(gpmc_fck);
rate = clk_get_rate(gpmc_fck);
clk_disable(gpmc_fck);
clk_put(gpmc_fck);
if (is_gpmc_muxed())
muxed = 0x200;
else
muxed = 0;
/* Make sure CS1 timings are correct */
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1,
0x00011000 | muxed);
if (rate >= 160000000) {
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
} else if (rate >= 130000000) {
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
} else {/* rate = 100000000 */
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
}
if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
goto out;
}
udelay(100);
omap_mux_init_gpio(92, 0);
if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0)
gpmc_cs_free(eth_cs);
out:
clk_disable(gpmc_fck);
clk_put(gpmc_fck);
}
static void __init h4_init_flash(void)
{
unsigned long base;
if (gpmc_cs_request(H4_FLASH_CS, SZ_64M, &base) < 0) {
printk("Can't request GPMC CS for flash\n");
return;
}
h4_flash_resource.start = base;
h4_flash_resource.end = base + SZ_64M - 1;
}
static struct at24_platform_data m24c01 = {
.byte_len = SZ_1K / 8,
.page_size = 16,
};
static struct i2c_board_info __initdata h4_i2c_board_info[] = {
{
I2C_BOARD_INFO("isp1301_omap", 0x2d),
},
{ /* EEPROM on mainboard */
I2C_BOARD_INFO("24c01", 0x52),
.platform_data = &m24c01,
},
{ /* EEPROM on cpu card */
I2C_BOARD_INFO("24c01", 0x57),
.platform_data = &m24c01,
},
};
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#endif
static void __init omap_h4_init(void)
{
omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF);
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on
* if not needed.
*/
board_mkp_init();
h4_i2c_board_info[0].irq = gpio_to_irq(125);
i2c_register_board_info(1, h4_i2c_board_info,
ARRAY_SIZE(h4_i2c_board_info));
platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
omap_serial_init();
omap_sdrc_init(NULL, NULL);
h4_init_flash();
omap_display_init(&h4_dss_data);
}
MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.handle_irq = omap2_intc_handle_irq,
.init_machine = omap_h4_init,
.init_late = omap2420_init_late,
.timer = &omap2_timer,
.restart = omap_prcm_restart,
MACHINE_END
Reference in New Issue View Git Blame Copy Permalink