linux_dsm_epyc7002/arch/x86/kernel/fpu/init.c
Linus Torvalds ecc026bff6 Merge branch 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Ingo Molnar:
 "The biggest change in terms of impact is the changing of the FPU
  context switch model to 'eagerfpu' for all CPU types, via: commit
  58122bf1d8: "x86/fpu: Default eagerfpu=on on all CPUs"

  This makes all FPU saves and restores synchronous and makes the FPU
  code a lot more obvious to read.  In the next cycle, if this change is
  problem free, we'll remove the old lazy FPU restore code altogether.

  This change flushed out some old bugs, which should all be fixed by
  now, BYMMV"

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Default eagerfpu=on on all CPUs
  x86/fpu: Speed up lazy FPU restores slightly
  x86/fpu: Fold fpu_copy() into fpu__copy()
  x86/fpu: Fix FNSAVE usage in eagerfpu mode
  x86/fpu: Fix math emulation in eager fpu mode
2016-03-15 10:23:56 -07:00

404 lines
11 KiB
C

/*
* x86 FPU boot time init code:
*/
#include <asm/fpu/internal.h>
#include <asm/tlbflush.h>
#include <asm/setup.h>
#include <asm/cmdline.h>
#include <linux/sched.h>
#include <linux/init.h>
/*
* Initialize the TS bit in CR0 according to the style of context-switches
* we are using:
*/
static void fpu__init_cpu_ctx_switch(void)
{
if (!boot_cpu_has(X86_FEATURE_EAGER_FPU))
stts();
else
clts();
}
/*
* Initialize the registers found in all CPUs, CR0 and CR4:
*/
static void fpu__init_cpu_generic(void)
{
unsigned long cr0;
unsigned long cr4_mask = 0;
if (cpu_has_fxsr)
cr4_mask |= X86_CR4_OSFXSR;
if (cpu_has_xmm)
cr4_mask |= X86_CR4_OSXMMEXCPT;
if (cr4_mask)
cr4_set_bits(cr4_mask);
cr0 = read_cr0();
cr0 &= ~(X86_CR0_TS|X86_CR0_EM); /* clear TS and EM */
if (!cpu_has_fpu)
cr0 |= X86_CR0_EM;
write_cr0(cr0);
/* Flush out any pending x87 state: */
#ifdef CONFIG_MATH_EMULATION
if (!cpu_has_fpu)
fpstate_init_soft(&current->thread.fpu.state.soft);
else
#endif
asm volatile ("fninit");
}
/*
* Enable all supported FPU features. Called when a CPU is brought online:
*/
void fpu__init_cpu(void)
{
fpu__init_cpu_generic();
fpu__init_cpu_xstate();
fpu__init_cpu_ctx_switch();
}
/*
* The earliest FPU detection code.
*
* Set the X86_FEATURE_FPU CPU-capability bit based on
* trying to execute an actual sequence of FPU instructions:
*/
static void fpu__init_system_early_generic(struct cpuinfo_x86 *c)
{
unsigned long cr0;
u16 fsw, fcw;
fsw = fcw = 0xffff;
cr0 = read_cr0();
cr0 &= ~(X86_CR0_TS | X86_CR0_EM);
write_cr0(cr0);
if (!test_bit(X86_FEATURE_FPU, (unsigned long *)cpu_caps_cleared)) {
asm volatile("fninit ; fnstsw %0 ; fnstcw %1"
: "+m" (fsw), "+m" (fcw));
if (fsw == 0 && (fcw & 0x103f) == 0x003f)
set_cpu_cap(c, X86_FEATURE_FPU);
else
clear_cpu_cap(c, X86_FEATURE_FPU);
}
#ifndef CONFIG_MATH_EMULATION
if (!cpu_has_fpu) {
pr_emerg("x86/fpu: Giving up, no FPU found and no math emulation present\n");
for (;;)
asm volatile("hlt");
}
#endif
}
/*
* Boot time FPU feature detection code:
*/
unsigned int mxcsr_feature_mask __read_mostly = 0xffffffffu;
static void __init fpu__init_system_mxcsr(void)
{
unsigned int mask = 0;
if (cpu_has_fxsr) {
/* Static because GCC does not get 16-byte stack alignment right: */
static struct fxregs_state fxregs __initdata;
asm volatile("fxsave %0" : "+m" (fxregs));
mask = fxregs.mxcsr_mask;
/*
* If zero then use the default features mask,
* which has all features set, except the
* denormals-are-zero feature bit:
*/
if (mask == 0)
mask = 0x0000ffbf;
}
mxcsr_feature_mask &= mask;
}
/*
* Once per bootup FPU initialization sequences that will run on most x86 CPUs:
*/
static void __init fpu__init_system_generic(void)
{
/*
* Set up the legacy init FPU context. (xstate init might overwrite this
* with a more modern format, if the CPU supports it.)
*/
fpstate_init(&init_fpstate);
fpu__init_system_mxcsr();
}
/*
* Size of the FPU context state. All tasks in the system use the
* same context size, regardless of what portion they use.
* This is inherent to the XSAVE architecture which puts all state
* components into a single, continuous memory block:
*/
unsigned int xstate_size;
EXPORT_SYMBOL_GPL(xstate_size);
/* Get alignment of the TYPE. */
#define TYPE_ALIGN(TYPE) offsetof(struct { char x; TYPE test; }, test)
/*
* Enforce that 'MEMBER' is the last field of 'TYPE'.
*
* Align the computed size with alignment of the TYPE,
* because that's how C aligns structs.
*/
#define CHECK_MEMBER_AT_END_OF(TYPE, MEMBER) \
BUILD_BUG_ON(sizeof(TYPE) != ALIGN(offsetofend(TYPE, MEMBER), \
TYPE_ALIGN(TYPE)))
/*
* We append the 'struct fpu' to the task_struct:
*/
static void __init fpu__init_task_struct_size(void)
{
int task_size = sizeof(struct task_struct);
/*
* Subtract off the static size of the register state.
* It potentially has a bunch of padding.
*/
task_size -= sizeof(((struct task_struct *)0)->thread.fpu.state);
/*
* Add back the dynamically-calculated register state
* size.
*/
task_size += xstate_size;
/*
* We dynamically size 'struct fpu', so we require that
* it be at the end of 'thread_struct' and that
* 'thread_struct' be at the end of 'task_struct'. If
* you hit a compile error here, check the structure to
* see if something got added to the end.
*/
CHECK_MEMBER_AT_END_OF(struct fpu, state);
CHECK_MEMBER_AT_END_OF(struct thread_struct, fpu);
CHECK_MEMBER_AT_END_OF(struct task_struct, thread);
arch_task_struct_size = task_size;
}
/*
* Set up the xstate_size based on the legacy FPU context size.
*
* We set this up first, and later it will be overwritten by
* fpu__init_system_xstate() if the CPU knows about xstates.
*/
static void __init fpu__init_system_xstate_size_legacy(void)
{
static int on_boot_cpu __initdata = 1;
WARN_ON_FPU(!on_boot_cpu);
on_boot_cpu = 0;
/*
* Note that xstate_size might be overwriten later during
* fpu__init_system_xstate().
*/
if (!cpu_has_fpu) {
/*
* Disable xsave as we do not support it if i387
* emulation is enabled.
*/
setup_clear_cpu_cap(X86_FEATURE_XSAVE);
setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT);
xstate_size = sizeof(struct swregs_state);
} else {
if (cpu_has_fxsr)
xstate_size = sizeof(struct fxregs_state);
else
xstate_size = sizeof(struct fregs_state);
}
/*
* Quirk: we don't yet handle the XSAVES* instructions
* correctly, as we don't correctly convert between
* standard and compacted format when interfacing
* with user-space - so disable it for now.
*
* The difference is small: with recent CPUs the
* compacted format is only marginally smaller than
* the standard FPU state format.
*
* ( This is easy to backport while we are fixing
* XSAVES* support. )
*/
setup_clear_cpu_cap(X86_FEATURE_XSAVES);
}
/*
* FPU context switching strategies:
*
* Against popular belief, we don't do lazy FPU saves, due to the
* task migration complications it brings on SMP - we only do
* lazy FPU restores.
*
* 'lazy' is the traditional strategy, which is based on setting
* CR0::TS to 1 during context-switch (instead of doing a full
* restore of the FPU state), which causes the first FPU instruction
* after the context switch (whenever it is executed) to fault - at
* which point we lazily restore the FPU state into FPU registers.
*
* Tasks are of course under no obligation to execute FPU instructions,
* so it can easily happen that another context-switch occurs without
* a single FPU instruction being executed. If we eventually switch
* back to the original task (that still owns the FPU) then we have
* not only saved the restores along the way, but we also have the
* FPU ready to be used for the original task.
*
* 'lazy' is deprecated because it's almost never a performance win
* and it's much more complicated than 'eager'.
*
* 'eager' switching is by default on all CPUs, there we switch the FPU
* state during every context switch, regardless of whether the task
* has used FPU instructions in that time slice or not. This is done
* because modern FPU context saving instructions are able to optimize
* state saving and restoration in hardware: they can detect both
* unused and untouched FPU state and optimize accordingly.
*
* [ Note that even in 'lazy' mode we might optimize context switches
* to use 'eager' restores, if we detect that a task is using the FPU
* frequently. See the fpu->counter logic in fpu/internal.h for that. ]
*/
static enum { ENABLE, DISABLE } eagerfpu = ENABLE;
/*
* Find supported xfeatures based on cpu features and command-line input.
* This must be called after fpu__init_parse_early_param() is called and
* xfeatures_mask is enumerated.
*/
u64 __init fpu__get_supported_xfeatures_mask(void)
{
/* Support all xfeatures known to us */
if (eagerfpu != DISABLE)
return XCNTXT_MASK;
/* Warning of xfeatures being disabled for no eagerfpu mode */
if (xfeatures_mask & XFEATURE_MASK_EAGER) {
pr_err("x86/fpu: eagerfpu switching disabled, disabling the following xstate features: 0x%llx.\n",
xfeatures_mask & XFEATURE_MASK_EAGER);
}
/* Return a mask that masks out all features requiring eagerfpu mode */
return ~XFEATURE_MASK_EAGER;
}
/*
* Disable features dependent on eagerfpu.
*/
static void __init fpu__clear_eager_fpu_features(void)
{
setup_clear_cpu_cap(X86_FEATURE_MPX);
}
/*
* Pick the FPU context switching strategy:
*
* When eagerfpu is AUTO or ENABLE, we ensure it is ENABLE if either of
* the following is true:
*
* (1) the cpu has xsaveopt, as it has the optimization and doing eager
* FPU switching has a relatively low cost compared to a plain xsave;
* (2) the cpu has xsave features (e.g. MPX) that depend on eager FPU
* switching. Should the kernel boot with noxsaveopt, we support MPX
* with eager FPU switching at a higher cost.
*/
static void __init fpu__init_system_ctx_switch(void)
{
static bool on_boot_cpu __initdata = 1;
WARN_ON_FPU(!on_boot_cpu);
on_boot_cpu = 0;
WARN_ON_FPU(current->thread.fpu.fpstate_active);
current_thread_info()->status = 0;
if (boot_cpu_has(X86_FEATURE_XSAVEOPT) && eagerfpu != DISABLE)
eagerfpu = ENABLE;
if (xfeatures_mask & XFEATURE_MASK_EAGER)
eagerfpu = ENABLE;
if (eagerfpu == ENABLE)
setup_force_cpu_cap(X86_FEATURE_EAGER_FPU);
printk(KERN_INFO "x86/fpu: Using '%s' FPU context switches.\n", eagerfpu == ENABLE ? "eager" : "lazy");
}
/*
* We parse fpu parameters early because fpu__init_system() is executed
* before parse_early_param().
*/
static void __init fpu__init_parse_early_param(void)
{
if (cmdline_find_option_bool(boot_command_line, "eagerfpu=off")) {
eagerfpu = DISABLE;
fpu__clear_eager_fpu_features();
}
if (cmdline_find_option_bool(boot_command_line, "no387"))
setup_clear_cpu_cap(X86_FEATURE_FPU);
if (cmdline_find_option_bool(boot_command_line, "nofxsr")) {
setup_clear_cpu_cap(X86_FEATURE_FXSR);
setup_clear_cpu_cap(X86_FEATURE_FXSR_OPT);
setup_clear_cpu_cap(X86_FEATURE_XMM);
}
if (cmdline_find_option_bool(boot_command_line, "noxsave"))
fpu__xstate_clear_all_cpu_caps();
if (cmdline_find_option_bool(boot_command_line, "noxsaveopt"))
setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT);
if (cmdline_find_option_bool(boot_command_line, "noxsaves"))
setup_clear_cpu_cap(X86_FEATURE_XSAVES);
}
/*
* Called on the boot CPU once per system bootup, to set up the initial
* FPU state that is later cloned into all processes:
*/
void __init fpu__init_system(struct cpuinfo_x86 *c)
{
fpu__init_parse_early_param();
fpu__init_system_early_generic(c);
/*
* The FPU has to be operational for some of the
* later FPU init activities:
*/
fpu__init_cpu();
/*
* But don't leave CR0::TS set yet, as some of the FPU setup
* methods depend on being able to execute FPU instructions
* that will fault on a set TS, such as the FXSAVE in
* fpu__init_system_mxcsr().
*/
clts();
fpu__init_system_generic();
fpu__init_system_xstate_size_legacy();
fpu__init_system_xstate();
fpu__init_task_struct_size();
fpu__init_system_ctx_switch();
}