linux_dsm_epyc7002/arch/arm/mach-mmp/devices.c
Lubomir Rintel 32adcaa010 ARM: mmp: move cputype.h to include/linux/soc/
Let's move cputype.h away from mach-mmp/ so that the drivers outside that
directory are able to tell the precise silicon revision. The MMP3 USB OTG
PHY driver needs this.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-10-17 16:36:12 +02:00

360 lines
8.3 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-mmp/devices.c
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <asm/irq.h>
#include "irqs.h"
#include "devices.h"
#include <linux/soc/mmp/cputype.h>
#include "regs-usb.h"
int __init pxa_register_device(struct pxa_device_desc *desc,
void *data, size_t size)
{
struct platform_device *pdev;
struct resource res[2 + MAX_RESOURCE_DMA];
int i, ret = 0, nres = 0;
pdev = platform_device_alloc(desc->drv_name, desc->id);
if (pdev == NULL)
return -ENOMEM;
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
memset(res, 0, sizeof(res));
if (desc->start != -1ul && desc->size > 0) {
res[nres].start = desc->start;
res[nres].end = desc->start + desc->size - 1;
res[nres].flags = IORESOURCE_MEM;
nres++;
}
if (desc->irq != NO_IRQ) {
res[nres].start = desc->irq;
res[nres].end = desc->irq;
res[nres].flags = IORESOURCE_IRQ;
nres++;
}
for (i = 0; i < MAX_RESOURCE_DMA; i++, nres++) {
if (desc->dma[i] == 0)
break;
res[nres].start = desc->dma[i];
res[nres].end = desc->dma[i];
res[nres].flags = IORESOURCE_DMA;
}
ret = platform_device_add_resources(pdev, res, nres);
if (ret) {
platform_device_put(pdev);
return ret;
}
if (data && size) {
ret = platform_device_add_data(pdev, data, size);
if (ret) {
platform_device_put(pdev);
return ret;
}
}
return platform_device_add(pdev);
}
#if IS_ENABLED(CONFIG_USB) || IS_ENABLED(CONFIG_USB_GADGET)
#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV)
#if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168)
/*****************************************************************************
* The registers read/write routines
*****************************************************************************/
static unsigned int u2o_get(void __iomem *base, unsigned int offset)
{
return readl_relaxed(base + offset);
}
static void u2o_set(void __iomem *base, unsigned int offset,
unsigned int value)
{
u32 reg;
reg = readl_relaxed(base + offset);
reg |= value;
writel_relaxed(reg, base + offset);
readl_relaxed(base + offset);
}
static void u2o_clear(void __iomem *base, unsigned int offset,
unsigned int value)
{
u32 reg;
reg = readl_relaxed(base + offset);
reg &= ~value;
writel_relaxed(reg, base + offset);
readl_relaxed(base + offset);
}
static void u2o_write(void __iomem *base, unsigned int offset,
unsigned int value)
{
writel_relaxed(value, base + offset);
readl_relaxed(base + offset);
}
static DEFINE_MUTEX(phy_lock);
static int phy_init_cnt;
static int usb_phy_init_internal(void __iomem *base)
{
int loops;
pr_info("Init usb phy!!!\n");
/* Initialize the USB PHY power */
if (cpu_is_pxa910()) {
u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
| (1<<UTMI_CTRL_PU_REF_SHIFT));
}
u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
/* UTMI_PLL settings */
u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
| UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
| UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
| UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT
| 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT
| 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT
| 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT);
/* UTMI_TX */
u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
| UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK
| UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK
| UTMI_TX_AMP_MASK);
u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT
| 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT
| 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT);
/* UTMI_RX */
u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
| UTMI_REG_SQ_LENGTH_MASK);
u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT
| 2<<UTMI_REG_SQ_LENGTH_SHIFT);
/* UTMI_IVREF */
if (cpu_is_pxa168())
/* fixing Microsoft Altair board interface with NEC hub issue -
* Set UTMI_IVREF from 0x4a3 to 0x4bf */
u2o_write(base, UTMI_IVREF, 0x4bf);
/* toggle VCOCAL_START bit of UTMI_PLL */
udelay(200);
u2o_set(base, UTMI_PLL, VCOCAL_START);
udelay(40);
u2o_clear(base, UTMI_PLL, VCOCAL_START);
/* toggle REG_RCAL_START bit of UTMI_TX */
udelay(400);
u2o_set(base, UTMI_TX, REG_RCAL_START);
udelay(40);
u2o_clear(base, UTMI_TX, REG_RCAL_START);
udelay(400);
/* Make sure PHY PLL is ready */
loops = 0;
while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) {
mdelay(1);
loops++;
if (loops > 100) {
printk(KERN_WARNING "calibrate timeout, UTMI_PLL %x\n",
u2o_get(base, UTMI_PLL));
break;
}
}
if (cpu_is_pxa168()) {
u2o_set(base, UTMI_RESERVE, 1 << 5);
/* Turn on UTMI PHY OTG extension */
u2o_write(base, UTMI_OTG_ADDON, 1);
}
return 0;
}
static int usb_phy_deinit_internal(void __iomem *base)
{
pr_info("Deinit usb phy!!!\n");
if (cpu_is_pxa168())
u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON);
u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN);
u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN);
u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN);
u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
return 0;
}
int pxa_usb_phy_init(void __iomem *phy_reg)
{
mutex_lock(&phy_lock);
if (phy_init_cnt++ == 0)
usb_phy_init_internal(phy_reg);
mutex_unlock(&phy_lock);
return 0;
}
void pxa_usb_phy_deinit(void __iomem *phy_reg)
{
WARN_ON(phy_init_cnt == 0);
mutex_lock(&phy_lock);
if (--phy_init_cnt == 0)
usb_phy_deinit_internal(phy_reg);
mutex_unlock(&phy_lock);
}
#endif
#endif
#endif
#if IS_ENABLED(CONFIG_USB_SUPPORT)
static u64 __maybe_unused usb_dma_mask = ~(u32)0;
#if IS_ENABLED(CONFIG_PHY_PXA_USB)
struct resource pxa168_usb_phy_resources[] = {
[0] = {
.start = PXA168_U2O_PHYBASE,
.end = PXA168_U2O_PHYBASE + USB_PHY_RANGE,
.flags = IORESOURCE_MEM,
},
};
struct platform_device pxa168_device_usb_phy = {
.name = "pxa-usb-phy",
.id = -1,
.resource = pxa168_usb_phy_resources,
.num_resources = ARRAY_SIZE(pxa168_usb_phy_resources),
.dev = {
.dma_mask = &usb_dma_mask,
.coherent_dma_mask = 0xffffffff,
}
};
#endif /* CONFIG_PHY_PXA_USB */
#if IS_ENABLED(CONFIG_USB_MV_UDC)
struct resource pxa168_u2o_resources[] = {
/* regbase */
[0] = {
.start = PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
.end = PXA168_U2O_REGBASE + USB_REG_RANGE,
.flags = IORESOURCE_MEM,
.name = "capregs",
},
/* phybase */
[1] = {
.start = PXA168_U2O_PHYBASE,
.end = PXA168_U2O_PHYBASE + USB_PHY_RANGE,
.flags = IORESOURCE_MEM,
.name = "phyregs",
},
[2] = {
.start = IRQ_PXA168_USB1,
.end = IRQ_PXA168_USB1,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa168_device_u2o = {
.name = "mv-udc",
.id = -1,
.resource = pxa168_u2o_resources,
.num_resources = ARRAY_SIZE(pxa168_u2o_resources),
.dev = {
.dma_mask = &usb_dma_mask,
.coherent_dma_mask = 0xffffffff,
}
};
#endif /* CONFIG_USB_MV_UDC */
#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
struct resource pxa168_u2oehci_resources[] = {
[0] = {
.start = PXA168_U2O_REGBASE,
.end = PXA168_U2O_REGBASE + USB_REG_RANGE,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_PXA168_USB1,
.end = IRQ_PXA168_USB1,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa168_device_u2oehci = {
.name = "pxa-u2oehci",
.id = -1,
.dev = {
.dma_mask = &usb_dma_mask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(pxa168_u2oehci_resources),
.resource = pxa168_u2oehci_resources,
};
#endif
#if IS_ENABLED(CONFIG_USB_MV_OTG)
struct resource pxa168_u2ootg_resources[] = {
/* regbase */
[0] = {
.start = PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
.end = PXA168_U2O_REGBASE + USB_REG_RANGE,
.flags = IORESOURCE_MEM,
.name = "capregs",
},
/* phybase */
[1] = {
.start = PXA168_U2O_PHYBASE,
.end = PXA168_U2O_PHYBASE + USB_PHY_RANGE,
.flags = IORESOURCE_MEM,
.name = "phyregs",
},
[2] = {
.start = IRQ_PXA168_USB1,
.end = IRQ_PXA168_USB1,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa168_device_u2ootg = {
.name = "mv-otg",
.id = -1,
.dev = {
.dma_mask = &usb_dma_mask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(pxa168_u2ootg_resources),
.resource = pxa168_u2ootg_resources,
};
#endif /* CONFIG_USB_MV_OTG */
#endif