linux_dsm_epyc7002/drivers/gpu/drm/i915/intel_dsi_cmd.c
Shobhit Kumar a799a9780e drm/i915/vlv: DPI FIFO empty check is not needed
While sending DPI SHUTDOWN command, we cannot wait for FIFO empty as
pipes are not disabled at that time. In case of MIPI we disable port
first and send SHUTDOWN command while pipe is still running and FIFOs
will not be empty, causing spurious error log

Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-07-09 09:51:53 +02:00

422 lines
12 KiB
C

/*
* Copyright © 2013 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Author: Jani Nikula <jani.nikula@intel.com>
*/
#include <linux/export.h>
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <video/mipi_display.h>
#include "i915_drv.h"
#include "intel_drv.h"
#include "intel_dsi.h"
#include "intel_dsi_cmd.h"
/*
* XXX: MIPI_DATA_ADDRESS, MIPI_DATA_LENGTH, MIPI_COMMAND_LENGTH, and
* MIPI_COMMAND_ADDRESS registers.
*
* Apparently these registers provide a MIPI adapter level way to send (lots of)
* commands and data to the receiver, without having to write the commands and
* data to MIPI_{HS,LP}_GEN_{CTRL,DATA} registers word by word.
*
* Presumably for anything other than MIPI_DCS_WRITE_MEMORY_START and
* MIPI_DCS_WRITE_MEMORY_CONTINUE (which are used to update the external
* framebuffer in command mode displays) these are just an optimization that can
* come later.
*
* For memory writes, these should probably be used for performance.
*/
static void print_stat(struct intel_dsi *intel_dsi)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
enum pipe pipe = intel_crtc->pipe;
u32 val;
val = I915_READ(MIPI_INTR_STAT(pipe));
#define STAT_BIT(val, bit) (val) & (bit) ? " " #bit : ""
DRM_DEBUG_KMS("MIPI_INTR_STAT(%d) = %08x"
"%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s"
"\n", pipe, val,
STAT_BIT(val, TEARING_EFFECT),
STAT_BIT(val, SPL_PKT_SENT_INTERRUPT),
STAT_BIT(val, GEN_READ_DATA_AVAIL),
STAT_BIT(val, LP_GENERIC_WR_FIFO_FULL),
STAT_BIT(val, HS_GENERIC_WR_FIFO_FULL),
STAT_BIT(val, RX_PROT_VIOLATION),
STAT_BIT(val, RX_INVALID_TX_LENGTH),
STAT_BIT(val, ACK_WITH_NO_ERROR),
STAT_BIT(val, TURN_AROUND_ACK_TIMEOUT),
STAT_BIT(val, LP_RX_TIMEOUT),
STAT_BIT(val, HS_TX_TIMEOUT),
STAT_BIT(val, DPI_FIFO_UNDERRUN),
STAT_BIT(val, LOW_CONTENTION),
STAT_BIT(val, HIGH_CONTENTION),
STAT_BIT(val, TXDSI_VC_ID_INVALID),
STAT_BIT(val, TXDSI_DATA_TYPE_NOT_RECOGNISED),
STAT_BIT(val, TXCHECKSUM_ERROR),
STAT_BIT(val, TXECC_MULTIBIT_ERROR),
STAT_BIT(val, TXECC_SINGLE_BIT_ERROR),
STAT_BIT(val, TXFALSE_CONTROL_ERROR),
STAT_BIT(val, RXDSI_VC_ID_INVALID),
STAT_BIT(val, RXDSI_DATA_TYPE_NOT_REGOGNISED),
STAT_BIT(val, RXCHECKSUM_ERROR),
STAT_BIT(val, RXECC_MULTIBIT_ERROR),
STAT_BIT(val, RXECC_SINGLE_BIT_ERROR),
STAT_BIT(val, RXFALSE_CONTROL_ERROR),
STAT_BIT(val, RXHS_RECEIVE_TIMEOUT_ERROR),
STAT_BIT(val, RX_LP_TX_SYNC_ERROR),
STAT_BIT(val, RXEXCAPE_MODE_ENTRY_ERROR),
STAT_BIT(val, RXEOT_SYNC_ERROR),
STAT_BIT(val, RXSOT_SYNC_ERROR),
STAT_BIT(val, RXSOT_ERROR));
#undef STAT_BIT
}
enum dsi_type {
DSI_DCS,
DSI_GENERIC,
};
/* enable or disable command mode hs transmissions */
void dsi_hs_mode_enable(struct intel_dsi *intel_dsi, bool enable)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
enum pipe pipe = intel_crtc->pipe;
u32 temp;
u32 mask = DBI_FIFO_EMPTY;
if (wait_for((I915_READ(MIPI_GEN_FIFO_STAT(pipe)) & mask) == mask, 50))
DRM_ERROR("Timeout waiting for DBI FIFO empty\n");
temp = I915_READ(MIPI_HS_LP_DBI_ENABLE(pipe));
temp &= DBI_HS_LP_MODE_MASK;
I915_WRITE(MIPI_HS_LP_DBI_ENABLE(pipe), enable ? DBI_HS_MODE : DBI_LP_MODE);
intel_dsi->hs = enable;
}
static int dsi_vc_send_short(struct intel_dsi *intel_dsi, int channel,
u8 data_type, u16 data)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
enum pipe pipe = intel_crtc->pipe;
u32 ctrl_reg;
u32 ctrl;
u32 mask;
DRM_DEBUG_KMS("channel %d, data_type %d, data %04x\n",
channel, data_type, data);
if (intel_dsi->hs) {
ctrl_reg = MIPI_HS_GEN_CTRL(pipe);
mask = HS_CTRL_FIFO_FULL;
} else {
ctrl_reg = MIPI_LP_GEN_CTRL(pipe);
mask = LP_CTRL_FIFO_FULL;
}
if (wait_for((I915_READ(MIPI_GEN_FIFO_STAT(pipe)) & mask) == 0, 50)) {
DRM_ERROR("Timeout waiting for HS/LP CTRL FIFO !full\n");
print_stat(intel_dsi);
}
/*
* Note: This function is also used for long packets, with length passed
* as data, since SHORT_PACKET_PARAM_SHIFT ==
* LONG_PACKET_WORD_COUNT_SHIFT.
*/
ctrl = data << SHORT_PACKET_PARAM_SHIFT |
channel << VIRTUAL_CHANNEL_SHIFT |
data_type << DATA_TYPE_SHIFT;
I915_WRITE(ctrl_reg, ctrl);
return 0;
}
static int dsi_vc_send_long(struct intel_dsi *intel_dsi, int channel,
u8 data_type, const u8 *data, int len)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
enum pipe pipe = intel_crtc->pipe;
u32 data_reg;
int i, j, n;
u32 mask;
DRM_DEBUG_KMS("channel %d, data_type %d, len %04x\n",
channel, data_type, len);
if (intel_dsi->hs) {
data_reg = MIPI_HS_GEN_DATA(pipe);
mask = HS_DATA_FIFO_FULL;
} else {
data_reg = MIPI_LP_GEN_DATA(pipe);
mask = LP_DATA_FIFO_FULL;
}
if (wait_for((I915_READ(MIPI_GEN_FIFO_STAT(pipe)) & mask) == 0, 50))
DRM_ERROR("Timeout waiting for HS/LP DATA FIFO !full\n");
for (i = 0; i < len; i += n) {
u32 val = 0;
n = min_t(int, len - i, 4);
for (j = 0; j < n; j++)
val |= *data++ << 8 * j;
I915_WRITE(data_reg, val);
/* XXX: check for data fifo full, once that is set, write 4
* dwords, then wait for not set, then continue. */
}
return dsi_vc_send_short(intel_dsi, channel, data_type, len);
}
static int dsi_vc_write_common(struct intel_dsi *intel_dsi,
int channel, const u8 *data, int len,
enum dsi_type type)
{
int ret;
if (len == 0) {
BUG_ON(type == DSI_GENERIC);
ret = dsi_vc_send_short(intel_dsi, channel,
MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM,
0);
} else if (len == 1) {
ret = dsi_vc_send_short(intel_dsi, channel,
type == DSI_GENERIC ?
MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM :
MIPI_DSI_DCS_SHORT_WRITE, data[0]);
} else if (len == 2) {
ret = dsi_vc_send_short(intel_dsi, channel,
type == DSI_GENERIC ?
MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM :
MIPI_DSI_DCS_SHORT_WRITE_PARAM,
(data[1] << 8) | data[0]);
} else {
ret = dsi_vc_send_long(intel_dsi, channel,
type == DSI_GENERIC ?
MIPI_DSI_GENERIC_LONG_WRITE :
MIPI_DSI_DCS_LONG_WRITE, data, len);
}
return ret;
}
int dsi_vc_dcs_write(struct intel_dsi *intel_dsi, int channel,
const u8 *data, int len)
{
return dsi_vc_write_common(intel_dsi, channel, data, len, DSI_DCS);
}
int dsi_vc_generic_write(struct intel_dsi *intel_dsi, int channel,
const u8 *data, int len)
{
return dsi_vc_write_common(intel_dsi, channel, data, len, DSI_GENERIC);
}
static int dsi_vc_dcs_send_read_request(struct intel_dsi *intel_dsi,
int channel, u8 dcs_cmd)
{
return dsi_vc_send_short(intel_dsi, channel, MIPI_DSI_DCS_READ,
dcs_cmd);
}
static int dsi_vc_generic_send_read_request(struct intel_dsi *intel_dsi,
int channel, u8 *reqdata,
int reqlen)
{
u16 data;
u8 data_type;
switch (reqlen) {
case 0:
data_type = MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM;
data = 0;
break;
case 1:
data_type = MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM;
data = reqdata[0];
break;
case 2:
data_type = MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM;
data = (reqdata[1] << 8) | reqdata[0];
break;
default:
BUG();
}
return dsi_vc_send_short(intel_dsi, channel, data_type, data);
}
static int dsi_read_data_return(struct intel_dsi *intel_dsi,
u8 *buf, int buflen)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
enum pipe pipe = intel_crtc->pipe;
int i, len = 0;
u32 data_reg, val;
if (intel_dsi->hs) {
data_reg = MIPI_HS_GEN_DATA(pipe);
} else {
data_reg = MIPI_LP_GEN_DATA(pipe);
}
while (len < buflen) {
val = I915_READ(data_reg);
for (i = 0; i < 4 && len < buflen; i++, len++)
buf[len] = val >> 8 * i;
}
return len;
}
int dsi_vc_dcs_read(struct intel_dsi *intel_dsi, int channel, u8 dcs_cmd,
u8 *buf, int buflen)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
enum pipe pipe = intel_crtc->pipe;
u32 mask;
int ret;
/*
* XXX: should issue multiple read requests and reads if request is
* longer than MIPI_MAX_RETURN_PKT_SIZE
*/
I915_WRITE(MIPI_INTR_STAT(pipe), GEN_READ_DATA_AVAIL);
ret = dsi_vc_dcs_send_read_request(intel_dsi, channel, dcs_cmd);
if (ret)
return ret;
mask = GEN_READ_DATA_AVAIL;
if (wait_for((I915_READ(MIPI_INTR_STAT(pipe)) & mask) == mask, 50))
DRM_ERROR("Timeout waiting for read data.\n");
ret = dsi_read_data_return(intel_dsi, buf, buflen);
if (ret < 0)
return ret;
if (ret != buflen)
return -EIO;
return 0;
}
int dsi_vc_generic_read(struct intel_dsi *intel_dsi, int channel,
u8 *reqdata, int reqlen, u8 *buf, int buflen)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
enum pipe pipe = intel_crtc->pipe;
u32 mask;
int ret;
/*
* XXX: should issue multiple read requests and reads if request is
* longer than MIPI_MAX_RETURN_PKT_SIZE
*/
I915_WRITE(MIPI_INTR_STAT(pipe), GEN_READ_DATA_AVAIL);
ret = dsi_vc_generic_send_read_request(intel_dsi, channel, reqdata,
reqlen);
if (ret)
return ret;
mask = GEN_READ_DATA_AVAIL;
if (wait_for((I915_READ(MIPI_INTR_STAT(pipe)) & mask) == mask, 50))
DRM_ERROR("Timeout waiting for read data.\n");
ret = dsi_read_data_return(intel_dsi, buf, buflen);
if (ret < 0)
return ret;
if (ret != buflen)
return -EIO;
return 0;
}
/*
* send a video mode command
*
* XXX: commands with data in MIPI_DPI_DATA?
*/
int dpi_send_cmd(struct intel_dsi *intel_dsi, u32 cmd, bool hs)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
enum pipe pipe = intel_crtc->pipe;
u32 mask;
/* XXX: pipe, hs */
if (hs)
cmd &= ~DPI_LP_MODE;
else
cmd |= DPI_LP_MODE;
/* clear bit */
I915_WRITE(MIPI_INTR_STAT(pipe), SPL_PKT_SENT_INTERRUPT);
/* XXX: old code skips write if control unchanged */
if (cmd == I915_READ(MIPI_DPI_CONTROL(pipe)))
DRM_ERROR("Same special packet %02x twice in a row.\n", cmd);
I915_WRITE(MIPI_DPI_CONTROL(pipe), cmd);
mask = SPL_PKT_SENT_INTERRUPT;
if (wait_for((I915_READ(MIPI_INTR_STAT(pipe)) & mask) == mask, 100))
DRM_ERROR("Video mode command 0x%08x send failed.\n", cmd);
return 0;
}