linux_dsm_epyc7002/arch/arm/mach-omap2/usb.h
Felipe Balbi e8c4a7acc9 ARM: OMAP: move OMAP USB platform data to <linux/platform_data/omap-usb.h>
In order to make single zImage work for ARM architecture,
we need to make sure we don't depend on private headers.

Move USB platform_data to <linux/platform_data/omap-usb.h>
and add a minimal drivers/mfd/usb-omap.h.

Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Partha Basak <parthab@india.ti.com>
Cc: Keshava Munegowda <keshava_mgowda@ti.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Felipe Balbi <balbi@ti.com>
[tony@atomide.com: updated for local mfd/usb-omap.h]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-24 14:26:55 -07:00

83 lines
2.4 KiB
C

#include <linux/platform_data/usb-omap.h>
/* AM35x */
/* USB 2.0 PHY Control */
#define CONF2_PHY_GPIOMODE (1 << 23)
#define CONF2_OTGMODE (3 << 14)
#define CONF2_NO_OVERRIDE (0 << 14)
#define CONF2_FORCE_HOST (1 << 14)
#define CONF2_FORCE_DEVICE (2 << 14)
#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
#define CONF2_SESENDEN (1 << 13)
#define CONF2_VBDTCTEN (1 << 12)
#define CONF2_REFFREQ_24MHZ (2 << 8)
#define CONF2_REFFREQ_26MHZ (7 << 8)
#define CONF2_REFFREQ_13MHZ (6 << 8)
#define CONF2_REFFREQ (0xf << 8)
#define CONF2_PHYCLKGD (1 << 7)
#define CONF2_VBUSSENSE (1 << 6)
#define CONF2_PHY_PLLON (1 << 5)
#define CONF2_RESET (1 << 4)
#define CONF2_PHYPWRDN (1 << 3)
#define CONF2_OTGPWRDN (1 << 2)
#define CONF2_DATPOL (1 << 1)
/* TI81XX specific definitions */
#define USBCTRL0 0x620
#define USBSTAT0 0x624
/* TI816X PHY controls bits */
#define TI816X_USBPHY0_NORMAL_MODE (1 << 0)
#define TI816X_USBPHY_REFCLK_OSC (1 << 8)
/* TI814X PHY controls bits */
#define USBPHY_CM_PWRDN (1 << 0)
#define USBPHY_OTG_PWRDN (1 << 1)
#define USBPHY_CHGDET_DIS (1 << 2)
#define USBPHY_CHGDET_RSTRT (1 << 3)
#define USBPHY_SRCONDM (1 << 4)
#define USBPHY_SINKONDP (1 << 5)
#define USBPHY_CHGISINK_EN (1 << 6)
#define USBPHY_CHGVSRC_EN (1 << 7)
#define USBPHY_DMPULLUP (1 << 8)
#define USBPHY_DPPULLUP (1 << 9)
#define USBPHY_CDET_EXTCTL (1 << 10)
#define USBPHY_GPIO_MODE (1 << 12)
#define USBPHY_DPOPBUFCTL (1 << 13)
#define USBPHY_DMOPBUFCTL (1 << 14)
#define USBPHY_DPINPUT (1 << 15)
#define USBPHY_DMINPUT (1 << 16)
#define USBPHY_DPGPIO_PD (1 << 17)
#define USBPHY_DMGPIO_PD (1 << 18)
#define USBPHY_OTGVDET_EN (1 << 19)
#define USBPHY_OTGSESSEND_EN (1 << 20)
#define USBPHY_DATA_POLARITY (1 << 23)
struct usbhs_omap_board_data {
enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
/* have to be valid if phy_reset is true and portx is in phy mode */
int reset_gpio_port[OMAP3_HS_USB_PORTS];
/* Set this to true for ES2.x silicon */
unsigned es2_compatibility:1;
unsigned phy_reset:1;
/*
* Regulators for USB PHYs.
* Each PHY can have a separate regulator.
*/
struct regulator *regulator[OMAP3_HS_USB_PORTS];
};
extern void usb_musb_init(struct omap_musb_board_data *board_data);
extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
extern void am35x_musb_reset(void);
extern void am35x_musb_phy_power(u8 on);
extern void am35x_musb_clear_irq(void);
extern void am35x_set_mode(u8 musb_mode);
extern void ti81xx_musb_phy_power(u8 on);