linux_dsm_epyc7002/drivers/bcma
Matt Redfearn 79ca239a68 bcma: Prevent build of PCI host features in module
Attempting to build bcma.ko with BCMA_DRIVER_PCI_HOSTMODE=y results in
a build error due to use of symbols not exported from vmlinux:

ERROR: "pcibios_enable_device" [drivers/bcma/bcma.ko] undefined!
ERROR: "register_pci_controller" [drivers/bcma/bcma.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1

To prevent this, don't allow the host mode feature to be built if
CONFIG_BCMA=m

Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13 18:47:47 +02:00
..
bcma_private.h
core.c
driver_chipcommon_b.c
driver_chipcommon_nflash.c
driver_chipcommon_pflash.c
driver_chipcommon_pmu.c bcma: Replace mdelay with usleep_range in bcma_pmu_resources_init 2018-02-27 15:52:13 +02:00
driver_chipcommon_sflash.c
driver_chipcommon.c
driver_gmac_cmn.c
driver_gpio.c
driver_mips.c
driver_pci_host.c
driver_pci.c
driver_pcie2.c bcma: Adjust block comment 2017-12-07 15:33:02 +02:00
host_pci.c bcma: add HP Stream Notebook 2018-02-28 16:37:22 +02:00
host_soc.c
Kconfig bcma: Prevent build of PCI host features in module 2018-03-13 18:47:47 +02:00
main.c
Makefile
README
scan.c
scan.h
sprom.c
TODO

Broadcom introduced new bus as replacement for older SSB. It is based on AMBA,
however from programming point of view there is nothing AMBA specific we use.

Standard AMBA drivers are platform specific, have hardcoded addresses and use
AMBA standard fields like CID and PID.

In case of Broadcom's cards every device consists of:
1) Broadcom specific AMBA device. It is put on AMBA bus, but can not be treated
   as standard AMBA device. Reading it's CID or PID can cause machine lockup.
2) AMBA standard devices called ports or wrappers. They have CIDs (AMBA_CID)
   and PIDs (0x103BB369), but we do not use that info for anything. One of that
   devices is used for managing Broadcom specific core.

Addresses of AMBA devices are not hardcoded in driver and have to be read from
EPROM.

In this situation we decided to introduce separated bus. It can contain up to
16 devices identified by Broadcom specific fields: manufacturer, id, revision
and class.