linux_dsm_epyc7002/include/asm-arm/arch-at91/at91_dbgu.h
Greg Ungerer b54942f820 [ARM] 4391/1: make at91 debug unit support optional
The AT91x40 family doesn't have the debug unit like its bigger brothers.
But it does have the ID and extension registers (with the bit meanings
the same). Reorganize at91_dbgu.h to cater for this.

This also affects the load uncompressor, since it outputs to the
debug port.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:11:21 +01:00

67 lines
2.8 KiB
C

/*
* include/asm-arm/arch-at91/at91_dbgu.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
*
* Debug Unit (DBGU) - System peripherals registers.
* Based on AT91RM9200 datasheet revision E.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91_DBGU_H
#define AT91_DBGU_H
#ifdef AT91_DBGU
#define AT91_DBGU_CR (AT91_DBGU + 0x00) /* Control Register */
#define AT91_DBGU_MR (AT91_DBGU + 0x04) /* Mode Register */
#define AT91_DBGU_IER (AT91_DBGU + 0x08) /* Interrupt Enable Register */
#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */
#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */
#define AT91_DBGU_IDR (AT91_DBGU + 0x0c) /* Interrupt Disable Register */
#define AT91_DBGU_IMR (AT91_DBGU + 0x10) /* Interrupt Mask Register */
#define AT91_DBGU_SR (AT91_DBGU + 0x14) /* Status Register */
#define AT91_DBGU_RHR (AT91_DBGU + 0x18) /* Receiver Holding Register */
#define AT91_DBGU_THR (AT91_DBGU + 0x1c) /* Transmitter Holding Register */
#define AT91_DBGU_BRGR (AT91_DBGU + 0x20) /* Baud Rate Generator Register */
#define AT91_DBGU_CIDR (AT91_DBGU + 0x40) /* Chip ID Register */
#define AT91_DBGU_EXID (AT91_DBGU + 0x44) /* Chip ID Extension Register */
#define AT91_DBGU_FNR (AT91_DBGU + 0x48) /* Force NTRST Register [SAM9 only] */
#define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */
#endif /* AT91_DBGU */
/*
* Some AT91 parts that don't have full DEBUG units still support the ID
* and extensions register.
*/
#define AT91_CIDR_VERSION (0x1f << 0) /* Version of the Device */
#define AT91_CIDR_EPROC (7 << 5) /* Embedded Processor */
#define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */
#define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */
#define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */
#define AT91_CIDR_SRAMSIZ_1K (1 << 16)
#define AT91_CIDR_SRAMSIZ_2K (2 << 16)
#define AT91_CIDR_SRAMSIZ_112K (4 << 16)
#define AT91_CIDR_SRAMSIZ_4K (5 << 16)
#define AT91_CIDR_SRAMSIZ_80K (6 << 16)
#define AT91_CIDR_SRAMSIZ_160K (7 << 16)
#define AT91_CIDR_SRAMSIZ_8K (8 << 16)
#define AT91_CIDR_SRAMSIZ_16K (9 << 16)
#define AT91_CIDR_SRAMSIZ_32K (10 << 16)
#define AT91_CIDR_SRAMSIZ_64K (11 << 16)
#define AT91_CIDR_SRAMSIZ_128K (12 << 16)
#define AT91_CIDR_SRAMSIZ_256K (13 << 16)
#define AT91_CIDR_SRAMSIZ_96K (14 << 16)
#define AT91_CIDR_SRAMSIZ_512K (15 << 16)
#define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */
#define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */
#define AT91_CIDR_EXT (1 << 31) /* Extension Flag */
#endif