linux_dsm_epyc7002/drivers/video/omap2/dss/sdi.c
Tomi Valkeinen 42c9dee821 OMAP: DSS2: Remove FB_OMAP_BOOTLOADER_INIT support
FB_OMAP_BOOTLOADER_INIT does not work, and it was only partially
implemented for SDI.

This patch removes support for FB_OMAP_BOOTLOADER_INIT to clean up the
code and to remove any assumptions that FB_OMAP_BOOTLOADER_INIT would
work.

Proper implementation is much more complex, requiring early boot time
register and clock handling to keep the DSS running.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11 15:46:27 +02:00

171 lines
3.6 KiB
C

/*
* linux/drivers/video/omap2/dss/sdi.c
*
* Copyright (C) 2009 Nokia Corporation
* Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#define DSS_SUBSYS_NAME "SDI"
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/regulator/consumer.h>
#include <plat/display.h>
#include <plat/cpu.h>
#include "dss.h"
static struct {
bool update_enabled;
struct regulator *vdds_sdi_reg;
} sdi;
static void sdi_basic_init(struct omap_dss_device *dssdev)
{
dispc_set_parallel_interface_mode(dssdev->manager->id,
OMAP_DSS_PARALLELMODE_BYPASS);
dispc_set_lcd_display_type(dssdev->manager->id,
OMAP_DSS_LCD_DISPLAY_TFT);
dispc_set_tft_data_lines(dssdev->manager->id, 24);
dispc_lcd_enable_signal_polarity(1);
}
int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
{
struct omap_video_timings *t = &dssdev->panel.timings;
struct dss_clock_info dss_cinfo;
struct dispc_clock_info dispc_cinfo;
u16 lck_div, pck_div;
unsigned long fck;
unsigned long pck;
int r;
r = omap_dss_start_device(dssdev);
if (r) {
DSSERR("failed to start device\n");
goto err0;
}
r = regulator_enable(sdi.vdds_sdi_reg);
if (r)
goto err1;
dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
sdi_basic_init(dssdev);
/* 15.5.9.1.2 */
dssdev->panel.config |= OMAP_DSS_LCD_RF | OMAP_DSS_LCD_ONOFF;
dispc_set_pol_freq(dssdev->manager->id, dssdev->panel.config,
dssdev->panel.acbi, dssdev->panel.acb);
r = dss_calc_clock_div(1, t->pixel_clock * 1000,
&dss_cinfo, &dispc_cinfo);
if (r)
goto err2;
fck = dss_cinfo.fck;
lck_div = dispc_cinfo.lck_div;
pck_div = dispc_cinfo.pck_div;
pck = fck / lck_div / pck_div / 1000;
if (pck != t->pixel_clock) {
DSSWARN("Could not find exact pixel clock. Requested %d kHz, "
"got %lu kHz\n",
t->pixel_clock, pck);
t->pixel_clock = pck;
}
dispc_set_lcd_timings(dssdev->manager->id, t);
r = dss_set_clock_div(&dss_cinfo);
if (r)
goto err2;
r = dispc_set_clock_div(dssdev->manager->id, &dispc_cinfo);
if (r)
goto err2;
dss_sdi_init(dssdev->phy.sdi.datapairs);
r = dss_sdi_enable();
if (r)
goto err1;
mdelay(2);
dssdev->manager->enable(dssdev->manager);
return 0;
err2:
dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
regulator_disable(sdi.vdds_sdi_reg);
err1:
omap_dss_stop_device(dssdev);
err0:
return r;
}
EXPORT_SYMBOL(omapdss_sdi_display_enable);
void omapdss_sdi_display_disable(struct omap_dss_device *dssdev)
{
dssdev->manager->disable(dssdev->manager);
dss_sdi_disable();
dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
regulator_disable(sdi.vdds_sdi_reg);
omap_dss_stop_device(dssdev);
}
EXPORT_SYMBOL(omapdss_sdi_display_disable);
int sdi_init_display(struct omap_dss_device *dssdev)
{
DSSDBG("SDI init\n");
if (sdi.vdds_sdi_reg == NULL) {
struct regulator *vdds_sdi;
vdds_sdi = dss_get_vdds_sdi();
if (IS_ERR(vdds_sdi)) {
DSSERR("can't get VDDS_SDI regulator\n");
return PTR_ERR(vdds_sdi);
}
sdi.vdds_sdi_reg = vdds_sdi;
}
return 0;
}
int sdi_init(void)
{
return 0;
}
void sdi_exit(void)
{
}