mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
a0a4c25fba
- New board support: ZII i.MX7 RMU2, Kontron i.MX6UL N6310, and
PHYTEC phyBOARD-Segin based on i.MX6ULL.
- A series from Andrey Smirnov to update vf610-zii boards on I2C
pinmux, switch watchdog, GPIO expander IRQ.
- Move GIC node into soc node for i.MX6 SoCs.
- Add OV5645 camera support for imx6qdl-wandboard board.
- Drop unneeded snvs_pwrkey node for imx7d-zii-rpu2 and imx7-colibri.
- Use simple-mfd instead of simple-bus for i.MX6 ANATOP.
- Move the native-mode property inside the display-timings node for
various i.MX25 and i.MX27 boards.
- Add EDMA devices for i.MX7ULP SoC.
- A series from Stefan Riedmueller to update imx6ul-phytec-segin board
on various devices.
- Use OF graph to describe the display for opos6uldev board.
- Misc random updates on i.MX7/6 boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdYpwdAAoJEFBXWFqHsHzOpjMH/ArmJ/FlGDFmyffpXIT1qQdu
vyHdwySvCtftUsypDAhPSD43eFAOwqqfZR8b05UA+LE3TYKildxu4X2eEK2eFVn9
d97AEUuC49utHv9kf28kVPX0atI3QgqwJOW8/Xa1dlJl8CZN4GupmbLzYl9w6zF/
ii1WCzfnKjCQRW7s6+vFGqSdBnT1QXGSVXSYv5JI9MDh2qCzuYB1AI11CEnemYAq
pgJdTtdgW5g8sn8NHoAzQ9nUsq2IPkBHZzmt38eVk2YyvOmrMnpktNlBzMIBGaCJ
q6tmU7GaLrgcXe/lQMApBZ21jieAeKLWY+mdYN+kg1EumZHzllfitBZKYcL7mVs=
=DoYY
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm32 device tree changes for 5.4:
- New board support: ZII i.MX7 RMU2, Kontron i.MX6UL N6310, and
PHYTEC phyBOARD-Segin based on i.MX6ULL.
- A series from Andrey Smirnov to update vf610-zii boards on I2C
pinmux, switch watchdog, GPIO expander IRQ.
- Move GIC node into soc node for i.MX6 SoCs.
- Add OV5645 camera support for imx6qdl-wandboard board.
- Drop unneeded snvs_pwrkey node for imx7d-zii-rpu2 and imx7-colibri.
- Use simple-mfd instead of simple-bus for i.MX6 ANATOP.
- Move the native-mode property inside the display-timings node for
various i.MX25 and i.MX27 boards.
- Add EDMA devices for i.MX7ULP SoC.
- A series from Stefan Riedmueller to update imx6ul-phytec-segin board
on various devices.
- Use OF graph to describe the display for opos6uldev board.
- Misc random updates on i.MX7/6 boards.
* tag 'imx-dt-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits)
ARM: dts: vf610-zii-scu4-aib: Configure IRQ line for GPIO expander
ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards
ARM: dts: vf610-zii-cfu1: Slow I2C0 down to 100 kHz
ARM: dts: pbab01: correct rtc vendor
ARM: vf610-zii-cfu1: Add node for switch watchdog
ARM: dts: imx6: drop gpmi-nand address and size cells
ARM: dts: imx6: replace simple-bus by simple-mfd for anatop
ARM: dts: imx6qdl-colibri: add phy to fec
ARM: dts: imx7-colibri: add recovery for I2C for iMX7
ARM: dts: imx7-colibri: Add sleep pinctrl to ethernet
ARM: dts: imx7-colibri: prepare module device tree for FlexCAN
ARM: dts: imx7-colibri: disable HS400
ARM: dts: imx7-colibri: make sure module supplies are always on
ARM: dts: imx7d: cl-som-imx7: add compatible for phy
ARM: dts: imx7d: cl-som-imx7: make ethernet work again
ARM: dts: imx6ul: Add csi node
ARM: dts: imx25: mbimxsd25: native-mode is part of display-timings
ARM: dts: apf27dev: native-mode is part of display-timings
ARM: dts: edb7211: native-mode is part of display-timings
ARM: dts: imx27-phytec-phycore-rdk: native-mode is part of display-timings
...
Link: https://lore.kernel.org/r/20190825153237.28829-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
465 lines
13 KiB
Plaintext
465 lines
13 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2016 Freescale Semiconductor, Inc.
|
|
* Copyright 2017-2018 NXP
|
|
* Dong Aisheng <aisheng.dong@nxp.com>
|
|
*/
|
|
|
|
#include <dt-bindings/clock/imx7ulp-clock.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
#include "imx7ulp-pinfunc.h"
|
|
|
|
/ {
|
|
interrupt-parent = <&intc>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
gpio0 = &gpio_ptc;
|
|
gpio1 = &gpio_ptd;
|
|
gpio2 = &gpio_pte;
|
|
gpio3 = &gpio_ptf;
|
|
i2c0 = &lpi2c6;
|
|
i2c1 = &lpi2c7;
|
|
mmc0 = &usdhc0;
|
|
mmc1 = &usdhc1;
|
|
serial0 = &lpuart4;
|
|
serial1 = &lpuart5;
|
|
serial2 = &lpuart6;
|
|
serial3 = &lpuart7;
|
|
usbphy0 = &usbphy1;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
intc: interrupt-controller@40021000 {
|
|
compatible = "arm,cortex-a7-gic";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0x40021000 0x1000>,
|
|
<0x40022000 0x1000>;
|
|
};
|
|
|
|
rosc: clock-rosc {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "rosc";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
sosc: clock-sosc {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "sosc";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
sirc: clock-sirc {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <16000000>;
|
|
clock-output-names = "sirc";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
firc: clock-firc {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <48000000>;
|
|
clock-output-names = "firc";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
upll: clock-upll {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <480000000>;
|
|
clock-output-names = "upll";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
mpll: clock-mpll {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <480000000>;
|
|
clock-output-names = "mpll";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
ahbbridge0: bus@40000000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x40000000 0x800000>;
|
|
ranges;
|
|
|
|
edma1: dma-controller@40080000 {
|
|
#dma-cells = <2>;
|
|
compatible = "fsl,imx7ulp-edma";
|
|
reg = <0x40080000 0x2000>,
|
|
<0x40210000 0x1000>;
|
|
dma-channels = <32>;
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "dma", "dmamux0";
|
|
clocks = <&pcc2 IMX7ULP_CLK_DMA1>,
|
|
<&pcc2 IMX7ULP_CLK_DMA_MUX1>;
|
|
};
|
|
|
|
crypto: crypto@40240000 {
|
|
compatible = "fsl,sec-v4.0";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x40240000 0x10000>;
|
|
ranges = <0 0x40240000 0x10000>;
|
|
clocks = <&pcc2 IMX7ULP_CLK_CAAM>,
|
|
<&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
|
|
clock-names = "aclk", "ipg";
|
|
|
|
sec_jr0: jr0@1000 {
|
|
compatible = "fsl,sec-v4.0-job-ring";
|
|
reg = <0x1000 0x1000>;
|
|
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
sec_jr1: jr1@2000 {
|
|
compatible = "fsl,sec-v4.0-job-ring";
|
|
reg = <0x2000 0x1000>;
|
|
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
lpuart4: serial@402d0000 {
|
|
compatible = "fsl,imx7ulp-lpuart";
|
|
reg = <0x402d0000 0x1000>;
|
|
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pcc2 IMX7ULP_CLK_LPUART4>;
|
|
clock-names = "ipg";
|
|
assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART4>;
|
|
assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
|
|
assigned-clock-rates = <24000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart5: serial@402e0000 {
|
|
compatible = "fsl,imx7ulp-lpuart";
|
|
reg = <0x402e0000 0x1000>;
|
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pcc2 IMX7ULP_CLK_LPUART5>;
|
|
clock-names = "ipg";
|
|
assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART5>;
|
|
assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
|
|
assigned-clock-rates = <48000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
tpm4: pwm@40250000 {
|
|
compatible = "fsl,imx7ulp-pwm";
|
|
reg = <0x40250000 0x1000>;
|
|
assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
|
|
assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
|
|
clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
tpm5: tpm@40260000 {
|
|
compatible = "fsl,imx7ulp-tpm";
|
|
reg = <0x40260000 0x1000>;
|
|
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
|
|
<&pcc2 IMX7ULP_CLK_LPTPM5>;
|
|
clock-names = "ipg", "per";
|
|
};
|
|
|
|
usbotg1: usb@40330000 {
|
|
compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
|
|
reg = <0x40330000 0x200>;
|
|
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pcc2 IMX7ULP_CLK_USB0>;
|
|
phys = <&usbphy1>;
|
|
fsl,usbmisc = <&usbmisc1 0>;
|
|
ahb-burst-config = <0x0>;
|
|
tx-burst-size-dword = <0x8>;
|
|
rx-burst-size-dword = <0x8>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbmisc1: usbmisc@40330200 {
|
|
compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc";
|
|
#index-cells = <1>;
|
|
reg = <0x40330200 0x200>;
|
|
};
|
|
|
|
usbphy1: usb-phy@40350000 {
|
|
compatible = "fsl,imx7ulp-usbphy", "fsl,imx6ul-usbphy";
|
|
reg = <0x40350000 0x1000>;
|
|
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>;
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
usdhc0: mmc@40370000 {
|
|
compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
|
|
reg = <0x40370000 0x10000>;
|
|
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
|
|
<&scg1 IMX7ULP_CLK_NIC1_DIV>,
|
|
<&pcc2 IMX7ULP_CLK_USDHC0>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>;
|
|
assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>;
|
|
bus-width = <4>;
|
|
fsl,tuning-start-tap = <20>;
|
|
fsl,tuning-step = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usdhc1: mmc@40380000 {
|
|
compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
|
|
reg = <0x40380000 0x10000>;
|
|
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
|
|
<&scg1 IMX7ULP_CLK_NIC1_DIV>,
|
|
<&pcc2 IMX7ULP_CLK_USDHC1>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC1>;
|
|
assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>;
|
|
bus-width = <4>;
|
|
fsl,tuning-start-tap = <20>;
|
|
fsl,tuning-step = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
scg1: clock-controller@403e0000 {
|
|
compatible = "fsl,imx7ulp-scg1";
|
|
reg = <0x403e0000 0x10000>;
|
|
clocks = <&rosc>, <&sosc>, <&sirc>,
|
|
<&firc>, <&upll>, <&mpll>;
|
|
clock-names = "rosc", "sosc", "sirc",
|
|
"firc", "upll", "mpll";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pcc2: clock-controller@403f0000 {
|
|
compatible = "fsl,imx7ulp-pcc2";
|
|
reg = <0x403f0000 0x10000>;
|
|
#clock-cells = <1>;
|
|
clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
|
|
<&scg1 IMX7ULP_CLK_NIC1_DIV>,
|
|
<&scg1 IMX7ULP_CLK_DDR_DIV>,
|
|
<&scg1 IMX7ULP_CLK_APLL_PFD2>,
|
|
<&scg1 IMX7ULP_CLK_APLL_PFD1>,
|
|
<&scg1 IMX7ULP_CLK_APLL_PFD0>,
|
|
<&scg1 IMX7ULP_CLK_UPLL>,
|
|
<&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>,
|
|
<&scg1 IMX7ULP_CLK_MIPI_PLL>,
|
|
<&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>,
|
|
<&scg1 IMX7ULP_CLK_ROSC>,
|
|
<&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>;
|
|
clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk",
|
|
"apll_pfd2", "apll_pfd1", "apll_pfd0",
|
|
"upll", "sosc_bus_clk", "mpll",
|
|
"firc_bus_clk", "rosc", "spll_bus_clk";
|
|
assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM5>;
|
|
assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
|
|
};
|
|
|
|
smc1: clock-controller@40410000 {
|
|
compatible = "fsl,imx7ulp-smc1";
|
|
reg = <0x40410000 0x1000>;
|
|
#clock-cells = <1>;
|
|
clocks = <&scg1 IMX7ULP_CLK_CORE_DIV>,
|
|
<&scg1 IMX7ULP_CLK_HSRUN_CORE_DIV>;
|
|
clock-names = "divcore", "hsrun_divcore";
|
|
};
|
|
|
|
pcc3: clock-controller@40b30000 {
|
|
compatible = "fsl,imx7ulp-pcc3";
|
|
reg = <0x40b30000 0x10000>;
|
|
#clock-cells = <1>;
|
|
clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
|
|
<&scg1 IMX7ULP_CLK_NIC1_DIV>,
|
|
<&scg1 IMX7ULP_CLK_DDR_DIV>,
|
|
<&scg1 IMX7ULP_CLK_APLL_PFD2>,
|
|
<&scg1 IMX7ULP_CLK_APLL_PFD1>,
|
|
<&scg1 IMX7ULP_CLK_APLL_PFD0>,
|
|
<&scg1 IMX7ULP_CLK_UPLL>,
|
|
<&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>,
|
|
<&scg1 IMX7ULP_CLK_MIPI_PLL>,
|
|
<&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>,
|
|
<&scg1 IMX7ULP_CLK_ROSC>,
|
|
<&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>;
|
|
clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk",
|
|
"apll_pfd2", "apll_pfd1", "apll_pfd0",
|
|
"upll", "sosc_bus_clk", "mpll",
|
|
"firc_bus_clk", "rosc", "spll_bus_clk";
|
|
};
|
|
};
|
|
|
|
ahbbridge1: bus@40800000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x40800000 0x800000>;
|
|
ranges;
|
|
|
|
lpi2c6: i2c@40a40000 {
|
|
compatible = "fsl,imx7ulp-lpi2c";
|
|
reg = <0x40a40000 0x10000>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>;
|
|
clock-names = "ipg";
|
|
assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>;
|
|
assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
|
|
assigned-clock-rates = <48000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpi2c7: i2c@40a50000 {
|
|
compatible = "fsl,imx7ulp-lpi2c";
|
|
reg = <0x40a50000 0x10000>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>;
|
|
clock-names = "ipg";
|
|
assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>;
|
|
assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
|
|
assigned-clock-rates = <48000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart6: serial@40a60000 {
|
|
compatible = "fsl,imx7ulp-lpuart";
|
|
reg = <0x40a60000 0x1000>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pcc3 IMX7ULP_CLK_LPUART6>;
|
|
clock-names = "ipg";
|
|
assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART6>;
|
|
assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
|
|
assigned-clock-rates = <48000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart7: serial@40a70000 {
|
|
compatible = "fsl,imx7ulp-lpuart";
|
|
reg = <0x40a70000 0x1000>;
|
|
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pcc3 IMX7ULP_CLK_LPUART7>;
|
|
clock-names = "ipg";
|
|
assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART7>;
|
|
assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
|
|
assigned-clock-rates = <48000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
memory-controller@40ab0000 {
|
|
compatible = "fsl,imx7ulp-mmdc", "fsl,imx6q-mmdc";
|
|
reg = <0x40ab0000 0x1000>;
|
|
clocks = <&pcc3 IMX7ULP_CLK_MMDC>;
|
|
};
|
|
|
|
iomuxc1: pinctrl@40ac0000 {
|
|
compatible = "fsl,imx7ulp-iomuxc1";
|
|
reg = <0x40ac0000 0x1000>;
|
|
};
|
|
|
|
gpio_ptc: gpio@40ae0000 {
|
|
compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
|
|
reg = <0x40ae0000 0x1000 0x400f0000 0x40>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
|
|
<&pcc3 IMX7ULP_CLK_PCTLC>;
|
|
clock-names = "gpio", "port";
|
|
gpio-ranges = <&iomuxc1 0 0 32>;
|
|
};
|
|
|
|
gpio_ptd: gpio@40af0000 {
|
|
compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
|
|
reg = <0x40af0000 0x1000 0x400f0040 0x40>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
|
|
<&pcc3 IMX7ULP_CLK_PCTLD>;
|
|
clock-names = "gpio", "port";
|
|
gpio-ranges = <&iomuxc1 0 32 32>;
|
|
};
|
|
|
|
gpio_pte: gpio@40b00000 {
|
|
compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
|
|
reg = <0x40b00000 0x1000 0x400f0080 0x40>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
|
|
<&pcc3 IMX7ULP_CLK_PCTLE>;
|
|
clock-names = "gpio", "port";
|
|
gpio-ranges = <&iomuxc1 0 64 32>;
|
|
};
|
|
|
|
gpio_ptf: gpio@40b10000 {
|
|
compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
|
|
reg = <0x40b10000 0x1000 0x400f00c0 0x40>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
|
|
<&pcc3 IMX7ULP_CLK_PCTLF>;
|
|
clock-names = "gpio", "port";
|
|
gpio-ranges = <&iomuxc1 0 96 32>;
|
|
};
|
|
};
|
|
|
|
m4aips1: bus@41080000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x41080000 0x80000>;
|
|
ranges;
|
|
|
|
sim: sim@410a3000 {
|
|
compatible = "fsl,imx7ulp-sim", "syscon";
|
|
reg = <0x410a3000 0x1000>;
|
|
};
|
|
|
|
ocotp: ocotp-ctrl@410a6000 {
|
|
compatible = "fsl,imx7ulp-ocotp", "syscon";
|
|
reg = <0x410a6000 0x4000>;
|
|
clocks = <&scg1 IMX7ULP_CLK_DUMMY>;
|
|
};
|
|
};
|
|
};
|