mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 21:29:49 +07:00
c84d59e728
This file is shared between the atusb firmware and the kernel driver. In this update it brings the new interfaces from version 0.3 of the firmware. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
90 lines
2.6 KiB
C
90 lines
2.6 KiB
C
/*
|
|
* atusb.h - Definitions shared between kernel and ATUSB firmware
|
|
*
|
|
* Written 2013 by Werner Almesberger <werner@almesberger.net>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation, version 2, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This file should be identical for kernel and firmware.
|
|
* Kernel: drivers/net/ieee802154/atusb.h
|
|
* Firmware: ben-wpan/atusb/fw/include/atusb/atusb.h
|
|
*/
|
|
|
|
#ifndef _ATUSB_H
|
|
#define _ATUSB_H
|
|
|
|
#define ATUSB_VENDOR_ID 0x20b7 /* Qi Hardware*/
|
|
#define ATUSB_PRODUCT_ID 0x1540 /* 802.15.4, device 0 */
|
|
/* -- - - */
|
|
|
|
#define ATUSB_BUILD_SIZE 256 /* maximum build version/date message length */
|
|
|
|
/* Commands to our device. Make sure this is synced with the firmware */
|
|
enum atusb_requests {
|
|
ATUSB_ID = 0x00, /* system status/control grp */
|
|
ATUSB_BUILD,
|
|
ATUSB_RESET,
|
|
ATUSB_RF_RESET = 0x10, /* debug/test group */
|
|
ATUSB_POLL_INT,
|
|
ATUSB_TEST, /* atusb-sil only */
|
|
ATUSB_TIMER,
|
|
ATUSB_GPIO,
|
|
ATUSB_SLP_TR,
|
|
ATUSB_GPIO_CLEANUP,
|
|
ATUSB_REG_WRITE = 0x20, /* transceiver group */
|
|
ATUSB_REG_READ,
|
|
ATUSB_BUF_WRITE,
|
|
ATUSB_BUF_READ,
|
|
ATUSB_SRAM_WRITE,
|
|
ATUSB_SRAM_READ,
|
|
ATUSB_SPI_WRITE = 0x30, /* SPI group */
|
|
ATUSB_SPI_READ1,
|
|
ATUSB_SPI_READ2,
|
|
ATUSB_SPI_WRITE2_SYNC,
|
|
ATUSB_RX_MODE = 0x40, /* HardMAC group */
|
|
ATUSB_TX,
|
|
ATUSB_EUI64_WRITE = 0x50, /* Parameter in EEPROM grp */
|
|
ATUSB_EUI64_READ,
|
|
};
|
|
|
|
/*
|
|
* Direction bRequest wValue wIndex wLength
|
|
*
|
|
* ->host ATUSB_ID - - 3
|
|
* ->host ATUSB_BUILD - - #bytes
|
|
* host-> ATUSB_RESET - - 0
|
|
*
|
|
* host-> ATUSB_RF_RESET - - 0
|
|
* ->host ATUSB_POLL_INT - - 1
|
|
* host-> ATUSB_TEST - - 0
|
|
* ->host ATUSB_TIMER - - #bytes (6)
|
|
* ->host ATUSB_GPIO dir+data mask+p# 3
|
|
* host-> ATUSB_SLP_TR - - 0
|
|
* host-> ATUSB_GPIO_CLEANUP - - 0
|
|
*
|
|
* host-> ATUSB_REG_WRITE value addr 0
|
|
* ->host ATUSB_REG_READ - addr 1
|
|
* host-> ATUSB_BUF_WRITE - - #bytes
|
|
* ->host ATUSB_BUF_READ - - #bytes
|
|
* host-> ATUSB_SRAM_WRITE - addr #bytes
|
|
* ->host ATUSB_SRAM_READ - addr #bytes
|
|
*
|
|
* host-> ATUSB_SPI_WRITE byte0 byte1 #bytes
|
|
* ->host ATUSB_SPI_READ1 byte0 - #bytes
|
|
* ->host ATUSB_SPI_READ2 byte0 byte1 #bytes
|
|
* ->host ATUSB_SPI_WRITE2_SYNC byte0 byte1 0/1
|
|
*
|
|
* host-> ATUSB_RX_MODE on - 0
|
|
* host-> ATUSB_TX flags ack_seq #bytes
|
|
* host-> ATUSB_EUI64_WRITE - - #bytes (8)
|
|
* ->host ATUSB_EUI64_READ - - #bytes (8)
|
|
*/
|
|
|
|
#define ATUSB_REQ_FROM_DEV (USB_TYPE_VENDOR | USB_DIR_IN)
|
|
#define ATUSB_REQ_TO_DEV (USB_TYPE_VENDOR | USB_DIR_OUT)
|
|
|
|
#endif /* !_ATUSB_H */
|