mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 16:39:53 +07:00
5a2ecf0de0
dtc has new checks for SPI buses. Fix the warnings in node names and unit-addresses. There's over 100 warnings for FSL boards, a few examples: arch/arm/boot/dts/imx28-duckbill-2-spi.dtb: Warning (spi_bus_bridge): /apb@80000000/apbh@80000000/ssp@80014000: node name for SPI buses should be 'spi' arch/arm/boot/dts/imx53-ppd.dtb: Warning (spi_bus_bridge): /soc/aips@50000000/spba@50000000/ecspi@50010000: node name for SPI buses should be 'spi' arch/arm/boot/dts/imx6dl-colibri-eval-v3.dtb: Warning (spi_bus_reg): /soc/aips-bus@2000000/spba-bus@2000000/spi@2014000/mcp251x@1: SPI bus unit address format error, expected "0" Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: Stefan Agner <stefan@agner.ch> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
373 lines
8.5 KiB
Plaintext
373 lines
8.5 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+
|
|
//
|
|
// Copyright 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
|
|
// Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
/*
|
|
* The decompressor and also some bootloaders rely on a
|
|
* pre-existing /chosen node to be available to insert the
|
|
* command line and merge other ATAGS info.
|
|
* Also for U-Boot there must be a pre-existing /memory node.
|
|
*/
|
|
chosen {};
|
|
memory { device_type = "memory"; };
|
|
|
|
aliases {
|
|
gpio0 = &gpio1;
|
|
gpio1 = &gpio2;
|
|
gpio2 = &gpio3;
|
|
i2c0 = &i2c1;
|
|
i2c1 = &i2c2;
|
|
i2c2 = &i2c3;
|
|
serial0 = &uart1;
|
|
serial1 = &uart2;
|
|
serial2 = &uart3;
|
|
serial3 = &uart4;
|
|
serial4 = &uart5;
|
|
spi0 = &spi1;
|
|
spi1 = &spi2;
|
|
spi2 = &spi3;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "arm,arm1136jf-s";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
avic: interrupt-controller@68000000 {
|
|
compatible = "fsl,imx31-avic", "fsl,avic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x68000000 0x100000>;
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
interrupt-parent = <&avic>;
|
|
ranges;
|
|
|
|
iram: iram@1fffc000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x1fffc000 0x4000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x1fffc000 0x4000>;
|
|
};
|
|
|
|
aips@43f00000 { /* AIPS1 */
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x43f00000 0x100000>;
|
|
ranges;
|
|
|
|
i2c1: i2c@43f80000 {
|
|
compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
|
|
reg = <0x43f80000 0x4000>;
|
|
interrupts = <10>;
|
|
clocks = <&clks 33>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@43f84000 {
|
|
compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
|
|
reg = <0x43f84000 0x4000>;
|
|
interrupts = <3>;
|
|
clocks = <&clks 35>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ata: ata@43f8c000 {
|
|
compatible = "fsl,imx31-pata", "fsl,imx27-pata";
|
|
reg = <0x43f8c000 0x4000>;
|
|
interrupts = <15>;
|
|
clocks = <&clks 26>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@43f90000 {
|
|
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
|
|
reg = <0x43f90000 0x4000>;
|
|
interrupts = <45>;
|
|
clocks = <&clks 10>, <&clks 30>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@43f94000 {
|
|
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
|
|
reg = <0x43f94000 0x4000>;
|
|
interrupts = <32>;
|
|
clocks = <&clks 10>, <&clks 31>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@43f98000 {
|
|
compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
|
|
reg = <0x43f98000 0x4000>;
|
|
interrupts = <4>;
|
|
clocks = <&clks 34>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@43fa4000 {
|
|
compatible = "fsl,imx31-cspi";
|
|
reg = <0x43fa4000 0x4000>;
|
|
interrupts = <14>;
|
|
clocks = <&clks 10>, <&clks 53>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma 8 8 0>, <&sdma 9 8 0>;
|
|
dma-names = "rx", "tx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
kpp: kpp@43fa8000 {
|
|
compatible = "fsl,imx31-kpp", "fsl,imx21-kpp";
|
|
reg = <0x43fa8000 0x4000>;
|
|
interrupts = <24>;
|
|
clocks = <&clks 46>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@43fb0000 {
|
|
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
|
|
reg = <0x43fb0000 0x4000>;
|
|
clocks = <&clks 10>, <&clks 49>;
|
|
clock-names = "ipg", "per";
|
|
interrupts = <46>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart5: serial@43fb4000 {
|
|
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
|
|
reg = <0x43fb4000 0x4000>;
|
|
interrupts = <47>;
|
|
clocks = <&clks 10>, <&clks 50>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
spba@50000000 {
|
|
compatible = "fsl,spba-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x50000000 0x100000>;
|
|
ranges;
|
|
|
|
sdhci1: sdhci@50004000 {
|
|
compatible = "fsl,imx31-mmc";
|
|
reg = <0x50004000 0x4000>;
|
|
interrupts = <9>;
|
|
clocks = <&clks 10>, <&clks 20>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma 20 3 0>;
|
|
dma-names = "rx-tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci2: sdhci@50008000 {
|
|
compatible = "fsl,imx31-mmc";
|
|
reg = <0x50008000 0x4000>;
|
|
interrupts = <8>;
|
|
clocks = <&clks 10>, <&clks 21>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma 21 3 0>;
|
|
dma-names = "rx-tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@5000c000 {
|
|
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
|
|
reg = <0x5000c000 0x4000>;
|
|
interrupts = <18>;
|
|
clocks = <&clks 10>, <&clks 48>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi2: spi@50010000 {
|
|
compatible = "fsl,imx31-cspi";
|
|
reg = <0x50010000 0x4000>;
|
|
interrupts = <13>;
|
|
clocks = <&clks 10>, <&clks 54>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma 6 8 0>, <&sdma 7 8 0>;
|
|
dma-names = "rx", "tx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
iim: iim@5001c000 {
|
|
compatible = "fsl,imx31-iim", "fsl,imx27-iim";
|
|
reg = <0x5001c000 0x1000>;
|
|
interrupts = <19>;
|
|
clocks = <&clks 25>;
|
|
};
|
|
};
|
|
|
|
aips@53f00000 { /* AIPS2 */
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x53f00000 0x100000>;
|
|
ranges;
|
|
|
|
clks: ccm@53f80000{
|
|
compatible = "fsl,imx31-ccm";
|
|
reg = <0x53f80000 0x4000>;
|
|
interrupts = <31>, <53>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
spi3: spi@53f84000 {
|
|
compatible = "fsl,imx31-cspi";
|
|
reg = <0x53f84000 0x4000>;
|
|
interrupts = <17>;
|
|
clocks = <&clks 10>, <&clks 28>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma 10 8 0>, <&sdma 11 8 0>;
|
|
dma-names = "rx", "tx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpt: timer@53f90000 {
|
|
compatible = "fsl,imx31-gpt";
|
|
reg = <0x53f90000 0x4000>;
|
|
interrupts = <29>;
|
|
clocks = <&clks 10>, <&clks 22>;
|
|
clock-names = "ipg", "per";
|
|
};
|
|
|
|
gpio3: gpio@53fa4000 {
|
|
compatible = "fsl,imx31-gpio";
|
|
reg = <0x53fa4000 0x4000>;
|
|
interrupts = <56>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
rng@53fb0000 {
|
|
compatible = "fsl,imx31-rnga";
|
|
reg = <0x53fb0000 0x4000>;
|
|
interrupts = <22>;
|
|
clocks = <&clks 29>;
|
|
};
|
|
|
|
gpio1: gpio@53fcc000 {
|
|
compatible = "fsl,imx31-gpio";
|
|
reg = <0x53fcc000 0x4000>;
|
|
interrupts = <52>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio@53fd0000 {
|
|
compatible = "fsl,imx31-gpio";
|
|
reg = <0x53fd0000 0x4000>;
|
|
interrupts = <51>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
sdma: sdma@53fd4000 {
|
|
compatible = "fsl,imx31-sdma";
|
|
reg = <0x53fd4000 0x4000>;
|
|
interrupts = <34>;
|
|
clocks = <&clks 10>, <&clks 27>;
|
|
clock-names = "ipg", "ahb";
|
|
#dma-cells = <3>;
|
|
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx31.bin";
|
|
};
|
|
|
|
rtc: rtc@53fd8000 {
|
|
compatible = "fsl,imx31-rtc", "fsl,imx21-rtc";
|
|
reg = <0x53fd8000 0x4000>;
|
|
interrupts = <25>;
|
|
clocks = <&clks 2>, <&clks 40>;
|
|
clock-names = "ref", "ipg";
|
|
};
|
|
|
|
wdog: wdog@53fdc000 {
|
|
compatible = "fsl,imx31-wdt", "fsl,imx21-wdt";
|
|
reg = <0x53fdc000 0x4000>;
|
|
clocks = <&clks 41>;
|
|
};
|
|
|
|
pwm: pwm@53fe0000 {
|
|
compatible = "fsl,imx31-pwm", "fsl,imx27-pwm";
|
|
reg = <0x53fe0000 0x4000>;
|
|
interrupts = <26>;
|
|
clocks = <&clks 10>, <&clks 42>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <2>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
emi@b8000000 { /* External Memory Interface */
|
|
compatible = "simple-bus";
|
|
reg = <0xb8000000 0x5000>;
|
|
ranges;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
nfc: nand@b8000000 {
|
|
compatible = "fsl,imx31-nand", "fsl,imx27-nand";
|
|
reg = <0xb8000000 0x1000>;
|
|
interrupts = <33>;
|
|
clocks = <&clks 9>;
|
|
dmas = <&sdma 30 17 0>;
|
|
dma-names = "rx-tx";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
weim: weim@b8002000 {
|
|
compatible = "fsl,imx31-weim", "fsl,imx27-weim";
|
|
reg = <0xb8002000 0x1000>;
|
|
clocks = <&clks 56>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0xa0000000 0x08000000
|
|
1 0 0xa8000000 0x08000000
|
|
2 0 0xb0000000 0x02000000
|
|
3 0 0xb2000000 0x02000000
|
|
4 0 0xb4000000 0x02000000
|
|
5 0 0xb6000000 0x02000000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
};
|