mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 00:56:45 +07:00
2491762cfb
This DMI quirk turns on "pci=use_crs" for the ALiveSATA2-GLAN because
amd_bus.c doesn't handle this system correctly.
The system has a single HyperTransport I/O chain, but has two PCI host
bridges to buses 00 and 80. amd_bus.c learns the MMIO range associated
with buses 00-ff and that this range is routed to the HT chain hosted at
node 0, link 0:
bus: [00, ff] on node 0 link 0
bus: 00 index 1 [mem 0x80000000-0xfcffffffff]
This includes the address space for both bus 00 and bus 80, and amd_bus.c
assumes it's all routed to bus 00.
We find device 80:01.0, which BIOS left in the middle of that space, but
we don't find a bridge from bus 00 to bus 80, so we conclude that 80:01.0
is unreachable from bus 00, and we move it from the original, working,
address to something outside the bus 00 aperture, which does not work:
pci 0000:80:01.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
pci 0000:80:01.0: BAR 0: assigned [mem 0xfd00000000-0xfd00003fff 64bit]
The BIOS told us everything we need to know to handle this correctly,
so we're better off if we just pay attention, which lets us leave the
80:01.0 device at the original, working, address:
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xff37ffff]
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])
pci_root PNP0A08:00: host bridge window [mem 0xfebfc000-0xfebfffff]
This was a regression between 2.6.33 and 2.6.34. In 2.6.33, amd_bus.c
was used only when we found multiple HT chains. 3e3da00c01
, which
enabled amd_bus.c even on systems with a single HT chain, caused this
failure.
This quirk was written by Graham. If we ever enable "pci=use_crs" for
machines from 2006 or earlir, this quirk should be removed.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16007
Cc: stable@kernel.org
Reported-by: Graham Ramsey <ramsey.graham@ntlworld.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
343 lines
8.4 KiB
C
343 lines
8.4 KiB
C
#include <linux/pci.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/init.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/slab.h>
|
|
#include <asm/numa.h>
|
|
#include <asm/pci_x86.h>
|
|
|
|
struct pci_root_info {
|
|
struct acpi_device *bridge;
|
|
char *name;
|
|
unsigned int res_num;
|
|
struct resource *res;
|
|
struct pci_bus *bus;
|
|
int busnum;
|
|
};
|
|
|
|
static bool pci_use_crs = true;
|
|
|
|
static int __init set_use_crs(const struct dmi_system_id *id)
|
|
{
|
|
pci_use_crs = true;
|
|
return 0;
|
|
}
|
|
|
|
static const struct dmi_system_id pci_use_crs_table[] __initconst = {
|
|
/* http://bugzilla.kernel.org/show_bug.cgi?id=14183 */
|
|
{
|
|
.callback = set_use_crs,
|
|
.ident = "IBM System x3800",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
|
|
},
|
|
},
|
|
/* https://bugzilla.kernel.org/show_bug.cgi?id=16007 */
|
|
/* 2006 AMD HT/VIA system with two host bridges */
|
|
{
|
|
.callback = set_use_crs,
|
|
.ident = "ASRock ALiveSATA2-GLAN",
|
|
.matches = {
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "ALiveSATA2-GLAN"),
|
|
},
|
|
},
|
|
{}
|
|
};
|
|
|
|
void __init pci_acpi_crs_quirks(void)
|
|
{
|
|
int year;
|
|
|
|
if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year < 2008)
|
|
pci_use_crs = false;
|
|
|
|
dmi_check_system(pci_use_crs_table);
|
|
|
|
/*
|
|
* If the user specifies "pci=use_crs" or "pci=nocrs" explicitly, that
|
|
* takes precedence over anything we figured out above.
|
|
*/
|
|
if (pci_probe & PCI_ROOT_NO_CRS)
|
|
pci_use_crs = false;
|
|
else if (pci_probe & PCI_USE__CRS)
|
|
pci_use_crs = true;
|
|
|
|
printk(KERN_INFO "PCI: %s host bridge windows from ACPI; "
|
|
"if necessary, use \"pci=%s\" and report a bug\n",
|
|
pci_use_crs ? "Using" : "Ignoring",
|
|
pci_use_crs ? "nocrs" : "use_crs");
|
|
}
|
|
|
|
static acpi_status
|
|
resource_to_addr(struct acpi_resource *resource,
|
|
struct acpi_resource_address64 *addr)
|
|
{
|
|
acpi_status status;
|
|
struct acpi_resource_memory24 *memory24;
|
|
struct acpi_resource_memory32 *memory32;
|
|
struct acpi_resource_fixed_memory32 *fixed_memory32;
|
|
|
|
memset(addr, 0, sizeof(*addr));
|
|
switch (resource->type) {
|
|
case ACPI_RESOURCE_TYPE_MEMORY24:
|
|
memory24 = &resource->data.memory24;
|
|
addr->resource_type = ACPI_MEMORY_RANGE;
|
|
addr->minimum = memory24->minimum;
|
|
addr->address_length = memory24->address_length;
|
|
addr->maximum = addr->minimum + addr->address_length - 1;
|
|
return AE_OK;
|
|
case ACPI_RESOURCE_TYPE_MEMORY32:
|
|
memory32 = &resource->data.memory32;
|
|
addr->resource_type = ACPI_MEMORY_RANGE;
|
|
addr->minimum = memory32->minimum;
|
|
addr->address_length = memory32->address_length;
|
|
addr->maximum = addr->minimum + addr->address_length - 1;
|
|
return AE_OK;
|
|
case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
|
|
fixed_memory32 = &resource->data.fixed_memory32;
|
|
addr->resource_type = ACPI_MEMORY_RANGE;
|
|
addr->minimum = fixed_memory32->address;
|
|
addr->address_length = fixed_memory32->address_length;
|
|
addr->maximum = addr->minimum + addr->address_length - 1;
|
|
return AE_OK;
|
|
case ACPI_RESOURCE_TYPE_ADDRESS16:
|
|
case ACPI_RESOURCE_TYPE_ADDRESS32:
|
|
case ACPI_RESOURCE_TYPE_ADDRESS64:
|
|
status = acpi_resource_to_address64(resource, addr);
|
|
if (ACPI_SUCCESS(status) &&
|
|
(addr->resource_type == ACPI_MEMORY_RANGE ||
|
|
addr->resource_type == ACPI_IO_RANGE) &&
|
|
addr->address_length > 0) {
|
|
return AE_OK;
|
|
}
|
|
break;
|
|
}
|
|
return AE_ERROR;
|
|
}
|
|
|
|
static acpi_status
|
|
count_resource(struct acpi_resource *acpi_res, void *data)
|
|
{
|
|
struct pci_root_info *info = data;
|
|
struct acpi_resource_address64 addr;
|
|
acpi_status status;
|
|
|
|
status = resource_to_addr(acpi_res, &addr);
|
|
if (ACPI_SUCCESS(status))
|
|
info->res_num++;
|
|
return AE_OK;
|
|
}
|
|
|
|
static acpi_status
|
|
setup_resource(struct acpi_resource *acpi_res, void *data)
|
|
{
|
|
struct pci_root_info *info = data;
|
|
struct resource *res;
|
|
struct acpi_resource_address64 addr;
|
|
acpi_status status;
|
|
unsigned long flags;
|
|
struct resource *root, *conflict;
|
|
u64 start, end;
|
|
|
|
status = resource_to_addr(acpi_res, &addr);
|
|
if (!ACPI_SUCCESS(status))
|
|
return AE_OK;
|
|
|
|
if (addr.resource_type == ACPI_MEMORY_RANGE) {
|
|
root = &iomem_resource;
|
|
flags = IORESOURCE_MEM;
|
|
if (addr.info.mem.caching == ACPI_PREFETCHABLE_MEMORY)
|
|
flags |= IORESOURCE_PREFETCH;
|
|
} else if (addr.resource_type == ACPI_IO_RANGE) {
|
|
root = &ioport_resource;
|
|
flags = IORESOURCE_IO;
|
|
} else
|
|
return AE_OK;
|
|
|
|
start = addr.minimum + addr.translation_offset;
|
|
end = addr.maximum + addr.translation_offset;
|
|
|
|
res = &info->res[info->res_num];
|
|
res->name = info->name;
|
|
res->flags = flags;
|
|
res->start = start;
|
|
res->end = end;
|
|
res->child = NULL;
|
|
|
|
if (!pci_use_crs) {
|
|
dev_printk(KERN_DEBUG, &info->bridge->dev,
|
|
"host bridge window %pR (ignored)\n", res);
|
|
return AE_OK;
|
|
}
|
|
|
|
conflict = insert_resource_conflict(root, res);
|
|
if (conflict) {
|
|
dev_err(&info->bridge->dev,
|
|
"address space collision: host bridge window %pR "
|
|
"conflicts with %s %pR\n",
|
|
res, conflict->name, conflict);
|
|
} else {
|
|
pci_bus_add_resource(info->bus, res, 0);
|
|
info->res_num++;
|
|
if (addr.translation_offset)
|
|
dev_info(&info->bridge->dev, "host bridge window %pR "
|
|
"(PCI address [%#llx-%#llx])\n",
|
|
res, res->start - addr.translation_offset,
|
|
res->end - addr.translation_offset);
|
|
else
|
|
dev_info(&info->bridge->dev,
|
|
"host bridge window %pR\n", res);
|
|
}
|
|
return AE_OK;
|
|
}
|
|
|
|
static void
|
|
get_current_resources(struct acpi_device *device, int busnum,
|
|
int domain, struct pci_bus *bus)
|
|
{
|
|
struct pci_root_info info;
|
|
size_t size;
|
|
|
|
if (pci_use_crs)
|
|
pci_bus_remove_resources(bus);
|
|
|
|
info.bridge = device;
|
|
info.bus = bus;
|
|
info.res_num = 0;
|
|
acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_resource,
|
|
&info);
|
|
if (!info.res_num)
|
|
return;
|
|
|
|
size = sizeof(*info.res) * info.res_num;
|
|
info.res = kmalloc(size, GFP_KERNEL);
|
|
if (!info.res)
|
|
goto res_alloc_fail;
|
|
|
|
info.name = kasprintf(GFP_KERNEL, "PCI Bus %04x:%02x", domain, busnum);
|
|
if (!info.name)
|
|
goto name_alloc_fail;
|
|
|
|
info.res_num = 0;
|
|
acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
|
|
&info);
|
|
|
|
return;
|
|
|
|
name_alloc_fail:
|
|
kfree(info.res);
|
|
res_alloc_fail:
|
|
return;
|
|
}
|
|
|
|
struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_pci_root *root)
|
|
{
|
|
struct acpi_device *device = root->device;
|
|
int domain = root->segment;
|
|
int busnum = root->secondary.start;
|
|
struct pci_bus *bus;
|
|
struct pci_sysdata *sd;
|
|
int node;
|
|
#ifdef CONFIG_ACPI_NUMA
|
|
int pxm;
|
|
#endif
|
|
|
|
if (domain && !pci_domains_supported) {
|
|
printk(KERN_WARNING "pci_bus %04x:%02x: "
|
|
"ignored (multiple domains not supported)\n",
|
|
domain, busnum);
|
|
return NULL;
|
|
}
|
|
|
|
node = -1;
|
|
#ifdef CONFIG_ACPI_NUMA
|
|
pxm = acpi_get_pxm(device->handle);
|
|
if (pxm >= 0)
|
|
node = pxm_to_node(pxm);
|
|
if (node != -1)
|
|
set_mp_bus_to_node(busnum, node);
|
|
else
|
|
#endif
|
|
node = get_mp_bus_to_node(busnum);
|
|
|
|
if (node != -1 && !node_online(node))
|
|
node = -1;
|
|
|
|
/* Allocate per-root-bus (not per bus) arch-specific data.
|
|
* TODO: leak; this memory is never freed.
|
|
* It's arguable whether it's worth the trouble to care.
|
|
*/
|
|
sd = kzalloc(sizeof(*sd), GFP_KERNEL);
|
|
if (!sd) {
|
|
printk(KERN_WARNING "pci_bus %04x:%02x: "
|
|
"ignored (out of memory)\n", domain, busnum);
|
|
return NULL;
|
|
}
|
|
|
|
sd->domain = domain;
|
|
sd->node = node;
|
|
/*
|
|
* Maybe the desired pci bus has been already scanned. In such case
|
|
* it is unnecessary to scan the pci bus with the given domain,busnum.
|
|
*/
|
|
bus = pci_find_bus(domain, busnum);
|
|
if (bus) {
|
|
/*
|
|
* If the desired bus exits, the content of bus->sysdata will
|
|
* be replaced by sd.
|
|
*/
|
|
memcpy(bus->sysdata, sd, sizeof(*sd));
|
|
kfree(sd);
|
|
} else {
|
|
bus = pci_create_bus(NULL, busnum, &pci_root_ops, sd);
|
|
if (bus) {
|
|
get_current_resources(device, busnum, domain, bus);
|
|
bus->subordinate = pci_scan_child_bus(bus);
|
|
}
|
|
}
|
|
|
|
if (!bus)
|
|
kfree(sd);
|
|
|
|
if (bus && node != -1) {
|
|
#ifdef CONFIG_ACPI_NUMA
|
|
if (pxm >= 0)
|
|
dev_printk(KERN_DEBUG, &bus->dev,
|
|
"on NUMA node %d (pxm %d)\n", node, pxm);
|
|
#else
|
|
dev_printk(KERN_DEBUG, &bus->dev, "on NUMA node %d\n", node);
|
|
#endif
|
|
}
|
|
|
|
return bus;
|
|
}
|
|
|
|
int __init pci_acpi_init(void)
|
|
{
|
|
struct pci_dev *dev = NULL;
|
|
|
|
if (acpi_noirq)
|
|
return -ENODEV;
|
|
|
|
printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n");
|
|
acpi_irq_penalty_init();
|
|
pcibios_enable_irq = acpi_pci_irq_enable;
|
|
pcibios_disable_irq = acpi_pci_irq_disable;
|
|
x86_init.pci.init_irq = x86_init_noop;
|
|
|
|
if (pci_routeirq) {
|
|
/*
|
|
* PCI IRQ routing is set up by pci_enable_device(), but we
|
|
* also do it here in case there are still broken drivers that
|
|
* don't use pci_enable_device().
|
|
*/
|
|
printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
|
|
for_each_pci_dev(dev)
|
|
acpi_pci_irq_enable(dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|