mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 20:35:12 +07:00
56d34730c1
Add DT binding documentation for Sierra PHY IP used in TI's J721E SoC. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Rob Herring <robh@kernel.org>
71 lines
2.4 KiB
Plaintext
71 lines
2.4 KiB
Plaintext
Cadence Sierra PHY
|
|
-----------------------
|
|
|
|
Required properties:
|
|
- compatible: Must be "cdns,sierra-phy-t0" for Sierra in Cadence platform
|
|
Must be "ti,sierra-phy-t0" for Sierra in TI's J721E SoC.
|
|
- resets: Must contain an entry for each in reset-names.
|
|
See ../reset/reset.txt for details.
|
|
- reset-names: Must include "sierra_reset" and "sierra_apb".
|
|
"sierra_reset" must control the reset line to the PHY.
|
|
"sierra_apb" must control the reset line to the APB PHY
|
|
interface ("sierra_apb" is optional).
|
|
- reg: register range for the PHY.
|
|
- #address-cells: Must be 1
|
|
- #size-cells: Must be 0
|
|
|
|
Optional properties:
|
|
- clocks: Must contain an entry in clock-names.
|
|
See ../clocks/clock-bindings.txt for details.
|
|
- clock-names: Must contain "cmn_refclk_dig_div" and
|
|
"cmn_refclk1_dig_div" for configuring the frequency of
|
|
the clock to the lanes. "phy_clk" is deprecated.
|
|
- cdns,autoconf: A boolean property whose presence indicates that the
|
|
PHY registers will be configured by hardware. If not
|
|
present, all sub-node optional properties must be
|
|
provided.
|
|
|
|
Sub-nodes:
|
|
Each group of PHY lanes with a single master lane should be represented as
|
|
a sub-node. Note that the actual configuration of each lane is determined by
|
|
hardware strapping, and must match the configuration specified here.
|
|
|
|
Sub-node required properties:
|
|
- #phy-cells: Generic PHY binding; must be 0.
|
|
- reg: The master lane number. This is the lowest numbered lane
|
|
in the lane group.
|
|
- resets: Must contain one entry which controls the reset line for the
|
|
master lane of the sub-node.
|
|
See ../reset/reset.txt for details.
|
|
|
|
Sub-node optional properties:
|
|
- cdns,num-lanes: Number of lanes in this group. From 1 to 4. The
|
|
group is made up of consecutive lanes.
|
|
- cdns,phy-type: Can be PHY_TYPE_PCIE or PHY_TYPE_USB3, depending on
|
|
configuration of lanes.
|
|
|
|
Example:
|
|
pcie_phy4: pcie-phy@fd240000 {
|
|
compatible = "cdns,sierra-phy-t0";
|
|
reg = <0x0 0xfd240000 0x0 0x40000>;
|
|
resets = <&phyrst 0>, <&phyrst 1>;
|
|
reset-names = "sierra_reset", "sierra_apb";
|
|
clocks = <&phyclock>;
|
|
clock-names = "phy_clk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pcie0_phy0: pcie-phy@0 {
|
|
reg = <0>;
|
|
resets = <&phyrst 2>;
|
|
cdns,num-lanes = <2>;
|
|
#phy-cells = <0>;
|
|
cdns,phy-type = <PHY_TYPE_PCIE>;
|
|
};
|
|
pcie0_phy1: pcie-phy@2 {
|
|
reg = <2>;
|
|
resets = <&phyrst 4>;
|
|
cdns,num-lanes = <1>;
|
|
#phy-cells = <0>;
|
|
cdns,phy-type = <PHY_TYPE_PCIE>;
|
|
};
|