mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 05:26:46 +07:00
e94233c287
Use standard GPIO constants to enhance the readability of DT GPIOs. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
388 lines
8.6 KiB
Plaintext
388 lines
8.6 KiB
Plaintext
/*
|
|
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "am33xx.dtsi"
|
|
|
|
/ {
|
|
model = "TI AM335x EVM";
|
|
compatible = "ti,am335x-evm", "ti,am33xx";
|
|
|
|
cpus {
|
|
cpu@0 {
|
|
cpu0-supply = <&vdd1_reg>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x10000000>; /* 256 MB */
|
|
};
|
|
|
|
am33xx_pinmux: pinmux@44e10800 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
|
|
|
|
matrix_keypad_s0: matrix_keypad_s0 {
|
|
pinctrl-single,pins = <
|
|
0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
|
|
0x58 0x7 /* gpmc_a6.gpio1_22, OUTPUT | MODE7 */
|
|
0x64 0x27 /* gpmc_a9.gpio1_25, INPUT | MODE7 */
|
|
0x68 0x27 /* gpmc_a10.gpio1_26, INPUT | MODE7 */
|
|
0x6c 0x27 /* gpmc_a11.gpio1_27, INPUT | MODE7 */
|
|
>;
|
|
};
|
|
|
|
volume_keys_s0: volume_keys_s0 {
|
|
pinctrl-single,pins = <
|
|
0x150 0x27 /* spi0_sclk.gpio0_2, INPUT | MODE7 */
|
|
0x154 0x27 /* spi0_d0.gpio0_3, INPUT | MODE7 */
|
|
>;
|
|
};
|
|
|
|
i2c0_pins: pinmux_i2c0_pins {
|
|
pinctrl-single,pins = <
|
|
0x188 0x30 /* i2c0_sda.i2c0_sda PULLUP | INPUTENABLE | MODE0 */
|
|
0x18c 0x30 /* i2c0_scl.i2c0_scl PULLUP | INPUTENABLE | MODE0 */
|
|
>;
|
|
};
|
|
|
|
i2c1_pins: pinmux_i2c1_pins {
|
|
pinctrl-single,pins = <
|
|
0x158 0x32 /* spi0_d1.i2c1_sda PULLUP | INPUTENABLE | MODE2 */
|
|
0x15c 0x32 /* spi0_cs0.i2c1_scl PULLUP | INPUTENABLE | MODE2 */
|
|
>;
|
|
};
|
|
|
|
uart0_pins: pinmux_uart0_pins {
|
|
pinctrl-single,pins = <
|
|
0x170 0x30 /* uart0_rxd.uart0_rxd PULLUP | INPUTENABLE | MODE0 */
|
|
0x174 0x00 /* uart0_txd.uart0_txd PULLDOWN | MODE0 */
|
|
>;
|
|
};
|
|
|
|
clkout2_pin: pinmux_clkout2_pin {
|
|
pinctrl-single,pins = <
|
|
0x1b4 0x03 /* xdma_event_intr1.clkout2 OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
|
|
>;
|
|
};
|
|
|
|
nandflash_pins_s0: nandflash_pins_s0 {
|
|
pinctrl-single,pins = <
|
|
0x0 0x30 /* gpmc_ad0.gpmc_ad0, INPUT | PULLUP | MODE0 */
|
|
0x4 0x30 /* gpmc_ad1.gpmc_ad1, INPUT | PULLUP | MODE0 */
|
|
0x8 0x30 /* gpmc_ad2.gpmc_ad2, INPUT | PULLUP | MODE0 */
|
|
0xc 0x30 /* gpmc_ad3.gpmc_ad3, INPUT | PULLUP | MODE0 */
|
|
0x10 0x30 /* gpmc_ad4.gpmc_ad4, INPUT | PULLUP | MODE0 */
|
|
0x14 0x30 /* gpmc_ad5.gpmc_ad5, INPUT | PULLUP | MODE0 */
|
|
0x18 0x30 /* gpmc_ad6.gpmc_ad6, INPUT | PULLUP | MODE0 */
|
|
0x1c 0x30 /* gpmc_ad7.gpmc_ad7, INPUT | PULLUP | MODE0 */
|
|
0x70 0x30 /* gpmc_wait0.gpmc_wait0, INPUT | PULLUP | MODE0 */
|
|
0x74 0x37 /* gpmc_wpn.gpio0_30, INPUT | PULLUP | MODE7 */
|
|
0x7c 0x8 /* gpmc_csn0.gpmc_csn0, PULL DISA */
|
|
0x90 0x8 /* gpmc_advn_ale.gpmc_advn_ale, PULL DISA */
|
|
0x94 0x8 /* gpmc_oen_ren.gpmc_oen_ren, PULL DISA */
|
|
0x98 0x8 /* gpmc_wen.gpmc_wen, PULL DISA */
|
|
0x9c 0x8 /* gpmc_be0n_cle.gpmc_be0n_cle, PULL DISA */
|
|
>;
|
|
};
|
|
};
|
|
|
|
ocp {
|
|
uart0: serial@44e09000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
i2c0: i2c@44e0b000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
tps: tps@2d {
|
|
reg = <0x2d>;
|
|
};
|
|
};
|
|
|
|
i2c1: i2c@4802a000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
|
|
lis331dlh: lis331dlh@18 {
|
|
compatible = "st,lis331dlh", "st,lis3lv02d";
|
|
reg = <0x18>;
|
|
Vdd-supply = <&lis3_reg>;
|
|
Vdd_IO-supply = <&lis3_reg>;
|
|
|
|
st,click-single-x;
|
|
st,click-single-y;
|
|
st,click-single-z;
|
|
st,click-thresh-x = <10>;
|
|
st,click-thresh-y = <10>;
|
|
st,click-thresh-z = <10>;
|
|
st,irq1-click;
|
|
st,irq2-click;
|
|
st,wakeup-x-lo;
|
|
st,wakeup-x-hi;
|
|
st,wakeup-y-lo;
|
|
st,wakeup-y-hi;
|
|
st,wakeup-z-lo;
|
|
st,wakeup-z-hi;
|
|
st,min-limit-x = <120>;
|
|
st,min-limit-y = <120>;
|
|
st,min-limit-z = <140>;
|
|
st,max-limit-x = <550>;
|
|
st,max-limit-y = <550>;
|
|
st,max-limit-z = <750>;
|
|
};
|
|
|
|
tsl2550: tsl2550@39 {
|
|
compatible = "taos,tsl2550";
|
|
reg = <0x39>;
|
|
};
|
|
|
|
tmp275: tmp275@48 {
|
|
compatible = "ti,tmp275";
|
|
reg = <0x48>;
|
|
};
|
|
};
|
|
|
|
elm: elm@48080000 {
|
|
status = "okay";
|
|
};
|
|
|
|
gpmc: gpmc@50000000 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&nandflash_pins_s0>;
|
|
ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
|
|
nand@0,0 {
|
|
reg = <0 0 0>; /* CS0, offset 0 */
|
|
nand-bus-width = <8>;
|
|
ti,nand-ecc-opt = "bch8";
|
|
gpmc,device-nand = "true";
|
|
gpmc,device-width = <1>;
|
|
gpmc,sync-clk-ps = <0>;
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <44>;
|
|
gpmc,cs-wr-off-ns = <44>;
|
|
gpmc,adv-on-ns = <6>;
|
|
gpmc,adv-rd-off-ns = <34>;
|
|
gpmc,adv-wr-off-ns = <44>;
|
|
gpmc,we-on-ns = <0>;
|
|
gpmc,we-off-ns = <40>;
|
|
gpmc,oe-on-ns = <0>;
|
|
gpmc,oe-off-ns = <54>;
|
|
gpmc,access-ns = <64>;
|
|
gpmc,rd-cycle-ns = <82>;
|
|
gpmc,wr-cycle-ns = <82>;
|
|
gpmc,wait-on-read = "true";
|
|
gpmc,wait-on-write = "true";
|
|
gpmc,bus-turnaround-ns = <0>;
|
|
gpmc,cycle2cycle-delay-ns = <0>;
|
|
gpmc,clk-activation-ns = <0>;
|
|
gpmc,wait-monitoring-ns = <0>;
|
|
gpmc,wr-access-ns = <40>;
|
|
gpmc,wr-data-mux-bus-ns = <0>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
elm_id = <&elm>;
|
|
|
|
/* MTD partition table */
|
|
partition@0 {
|
|
label = "SPL1";
|
|
reg = <0x00000000 0x000020000>;
|
|
};
|
|
|
|
partition@1 {
|
|
label = "SPL2";
|
|
reg = <0x00020000 0x00020000>;
|
|
};
|
|
|
|
partition@2 {
|
|
label = "SPL3";
|
|
reg = <0x00040000 0x00020000>;
|
|
};
|
|
|
|
partition@3 {
|
|
label = "SPL4";
|
|
reg = <0x00060000 0x00020000>;
|
|
};
|
|
|
|
partition@4 {
|
|
label = "U-boot";
|
|
reg = <0x00080000 0x001e0000>;
|
|
};
|
|
|
|
partition@5 {
|
|
label = "environment";
|
|
reg = <0x00260000 0x00020000>;
|
|
};
|
|
|
|
partition@6 {
|
|
label = "Kernel";
|
|
reg = <0x00280000 0x00500000>;
|
|
};
|
|
|
|
partition@7 {
|
|
label = "File-System";
|
|
reg = <0x00780000 0x0F880000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
vbat: fixedregulator@0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vbat";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
lis3_reg: fixedregulator@1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "lis3_reg";
|
|
regulator-boot-on;
|
|
};
|
|
|
|
matrix_keypad: matrix_keypad@0 {
|
|
compatible = "gpio-matrix-keypad";
|
|
debounce-delay-ms = <5>;
|
|
col-scan-delay-us = <2>;
|
|
|
|
row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH /* Bank1, pin25 */
|
|
&gpio1 26 GPIO_ACTIVE_HIGH /* Bank1, pin26 */
|
|
&gpio1 27 GPIO_ACTIVE_HIGH>; /* Bank1, pin27 */
|
|
|
|
col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH /* Bank1, pin21 */
|
|
&gpio1 22 GPIO_ACTIVE_HIGH>; /* Bank1, pin22 */
|
|
|
|
linux,keymap = <0x0000008b /* MENU */
|
|
0x0100009e /* BACK */
|
|
0x02000069 /* LEFT */
|
|
0x0001006a /* RIGHT */
|
|
0x0101001c /* ENTER */
|
|
0x0201006c>; /* DOWN */
|
|
};
|
|
|
|
gpio_keys: volume_keys@0 {
|
|
compatible = "gpio-keys";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
autorepeat;
|
|
|
|
switch@9 {
|
|
label = "volume-up";
|
|
linux,code = <115>;
|
|
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
|
gpio-key,wakeup;
|
|
};
|
|
|
|
switch@10 {
|
|
label = "volume-down";
|
|
linux,code = <114>;
|
|
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
|
|
gpio-key,wakeup;
|
|
};
|
|
};
|
|
};
|
|
|
|
#include "tps65910.dtsi"
|
|
|
|
&tps {
|
|
vcc1-supply = <&vbat>;
|
|
vcc2-supply = <&vbat>;
|
|
vcc3-supply = <&vbat>;
|
|
vcc4-supply = <&vbat>;
|
|
vcc5-supply = <&vbat>;
|
|
vcc6-supply = <&vbat>;
|
|
vcc7-supply = <&vbat>;
|
|
vccio-supply = <&vbat>;
|
|
|
|
regulators {
|
|
vrtc_reg: regulator@0 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vio_reg: regulator@1 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd1_reg: regulator@2 {
|
|
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
|
|
regulator-name = "vdd_mpu";
|
|
regulator-min-microvolt = <912500>;
|
|
regulator-max-microvolt = <1312500>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd2_reg: regulator@3 {
|
|
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
|
|
regulator-name = "vdd_core";
|
|
regulator-min-microvolt = <912500>;
|
|
regulator-max-microvolt = <1150000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd3_reg: regulator@4 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdig1_reg: regulator@5 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdig2_reg: regulator@6 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vpll_reg: regulator@7 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdac_reg: regulator@8 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vaux1_reg: regulator@9 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vaux2_reg: regulator@10 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vaux33_reg: regulator@11 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vmmc_reg: regulator@12 {
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cpsw_emac0 {
|
|
phy_id = <&davinci_mdio>, <0>;
|
|
};
|
|
|
|
&cpsw_emac1 {
|
|
phy_id = <&davinci_mdio>, <1>;
|
|
};
|