mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 23:53:45 +07:00
af98715f28
The property is optional and defaults to 32. Document it as such. Cc: devicetree@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
78 lines
2.2 KiB
Plaintext
78 lines
2.2 KiB
Plaintext
* MARVELL MMP DMA controller
|
|
|
|
Marvell Peripheral DMA Controller
|
|
Used platforms: pxa688, pxa910, pxa3xx, etc
|
|
|
|
Required properties:
|
|
- compatible: Should be "marvell,pdma-1.0"
|
|
- reg: Should contain DMA registers location and length.
|
|
- interrupts: Either contain all of the per-channel DMA interrupts
|
|
or one irq for pdma device
|
|
|
|
Optional properties:
|
|
- #dma-channels: Number of DMA channels supported by the controller (defaults
|
|
to 32 when not specified)
|
|
|
|
"marvell,pdma-1.0"
|
|
Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688.
|
|
|
|
Examples:
|
|
|
|
/*
|
|
* Each channel has specific irq
|
|
* ICU parse out irq channel from ICU register,
|
|
* while DMA controller may not able to distinguish the irq channel
|
|
* Using this method, interrupt-parent is required as demuxer
|
|
* For example, pxa688 icu register 0x128, bit 0~15 is PDMA channel irq,
|
|
* 18~21 is ADMA irq
|
|
*/
|
|
pdma: dma-controller@d4000000 {
|
|
compatible = "marvell,pdma-1.0";
|
|
reg = <0xd4000000 0x10000>;
|
|
interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
|
|
interrupt-parent = <&intcmux32>;
|
|
#dma-channels = <16>;
|
|
};
|
|
|
|
/*
|
|
* One irq for all channels
|
|
* Dmaengine driver (DMA controller) distinguish irq channel via
|
|
* parsing internal register
|
|
*/
|
|
pdma: dma-controller@d4000000 {
|
|
compatible = "marvell,pdma-1.0";
|
|
reg = <0xd4000000 0x10000>;
|
|
interrupts = <47>;
|
|
#dma-channels = <16>;
|
|
};
|
|
|
|
|
|
Marvell Two Channel DMA Controller used specifically for audio
|
|
Used platforms: pxa688, pxa910
|
|
|
|
Required properties:
|
|
- compatible: Should be "marvell,adma-1.0" or "marvell,pxa910-squ"
|
|
- reg: Should contain DMA registers location and length.
|
|
- interrupts: Either contain all of the per-channel DMA interrupts
|
|
or one irq for dma device
|
|
|
|
"marvell,adma-1.0" used on pxa688
|
|
"marvell,pxa910-squ" used on pxa910
|
|
|
|
Examples:
|
|
|
|
/* each channel has specific irq */
|
|
adma0: dma-controller@d42a0800 {
|
|
compatible = "marvell,adma-1.0";
|
|
reg = <0xd42a0800 0x100>;
|
|
interrupts = <18 19>;
|
|
interrupt-parent = <&intcmux32>;
|
|
};
|
|
|
|
/* One irq for all channels */
|
|
squ: dma-controller@d42a0800 {
|
|
compatible = "marvell,pxa910-squ";
|
|
reg = <0xd42a0800 0x100>;
|
|
interrupts = <46>;
|
|
};
|