mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-22 11:58:21 +07:00
c08b598410
Now that the SPI GPIO driver knows how to handle these chip select GPIOs and we get nasty messages about the core having to enforce active low on the GPIO, fix this up by actually requesting the CS GPIO line as active low. Link: https://lore.kernel.org/r/20190813072731.4558-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
267 lines
6.0 KiB
Plaintext
267 lines
6.0 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Device Tree for the ST Microelectronics Nomadik NHK8815 board
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include "ste-nomadik-stn8815.dtsi"
|
|
|
|
/ {
|
|
model = "Nomadik STN8815NHK";
|
|
compatible = "st,nomadik-nhk-15";
|
|
|
|
chosen {
|
|
bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
|
|
};
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
stmpe-i2c0 = &stmpe0;
|
|
stmpe-i2c1 = &stmpe1;
|
|
};
|
|
|
|
pinctrl {
|
|
uart0 {
|
|
uart0_nhk_mode: uart0_mux {
|
|
u0_default_mux {
|
|
function = "u0";
|
|
groups = "u0txrx_a_1", "u0ctsrts_a_1";
|
|
};
|
|
};
|
|
};
|
|
|
|
stmpe2401_1 {
|
|
stmpe2401_1_nhk_mode: stmpe2401_1_nhk {
|
|
nhk_cfg1 {
|
|
pins = "GPIO76_B20"; // IRQ line
|
|
ste,input = <0>;
|
|
};
|
|
nhk_cfg2 {
|
|
pins = "GPIO77_B8"; // reset line
|
|
ste,output = <1>;
|
|
};
|
|
};
|
|
};
|
|
stmpe2401_2 {
|
|
stmpe2401_2_nhk_mode: stmpe2401_2_nhk {
|
|
nhk_cfg1 {
|
|
pins = "GPIO78_A8"; // IRQ line
|
|
ste,input = <0>;
|
|
};
|
|
nhk_cfg2 {
|
|
pins = "GPIO79_C9"; // reset line
|
|
ste,output = <1>;
|
|
};
|
|
};
|
|
};
|
|
lis3lv02dl {
|
|
lis3lv02dl_nhk_mode: lis3lv02dl_nhk {
|
|
nhk_cfg1 {
|
|
pins = "GPIO82_C10"; // IRQ line
|
|
ste,input = <0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
src@101e0000 {
|
|
/* These chrystal outputs are not used on this board */
|
|
disable-sxtalo;
|
|
disable-mxtalo;
|
|
};
|
|
|
|
/* This is where the interrupt is routed on the NHK-15 debug board */
|
|
external-bus@34000000 {
|
|
compatible = "simple-bus";
|
|
reg = <0x34000000 0x1000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x34000000 0x1000000>;
|
|
ethernet@300 {
|
|
compatible = "smsc,lan91c111";
|
|
reg = <0x300 0x0fd00>;
|
|
reg-io-width = <2>;
|
|
reset-gpios = <&stmpe_gpio44 10 GPIO_ACTIVE_HIGH>;
|
|
interrupt-parent = <&stmpe_gpio44>;
|
|
interrupts = <11 IRQ_TYPE_EDGE_RISING>;
|
|
};
|
|
};
|
|
|
|
i2c0 {
|
|
lis3lv02dl@1d {
|
|
/* Accelerometer */
|
|
compatible = "st,lis3lv02dl-accel";
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <18 IRQ_TYPE_EDGE_RISING>; // GPIO 82
|
|
pinctrl-0 = <&lis3lv02dl_nhk_mode>;
|
|
pinctrl-names = "default";
|
|
reg = <0x1d>;
|
|
};
|
|
stmpe0: stmpe2401@43 {
|
|
compatible = "st,stmpe2401";
|
|
reg = <0x43>;
|
|
reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; // GPIO77
|
|
interrupts = <12 IRQ_TYPE_EDGE_FALLING>; // GPIO76
|
|
interrupt-parent = <&gpio2>;
|
|
interrupt-controller;
|
|
wakeup-source;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&stmpe2401_1_nhk_mode>;
|
|
stmpe_gpio43: stmpe_gpio {
|
|
compatible = "st,stmpe-gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
/* Some pins in alternate functions */
|
|
st,norequest-mask = <0xf0f002>;
|
|
};
|
|
stmpe_keypad {
|
|
compatible = "st,stmpe-keypad";
|
|
debounce-interval = <64>;
|
|
st,scan-count = <8>;
|
|
st,no-autorepeat;
|
|
keypad,num-rows = <8>;
|
|
keypad,num-columns = <8>;
|
|
linux,keymap = <0x00020072 // Vol down
|
|
0x00030073 // Vol up
|
|
0x0100009e // Back
|
|
0x010100e3 // TV out
|
|
0x01020098 // Lock
|
|
0x0103013b // Start
|
|
0x020000a3 // Next
|
|
0x020100a4 // Play
|
|
0x020200a5 // Prev
|
|
0x02030160 // OK
|
|
0x03000069 // Left
|
|
0x0301006a // Right
|
|
0x03020067 // Up
|
|
0x0303006c>; // Down
|
|
};
|
|
stmpe0_pwm: stmpe_pwm {
|
|
compatible = "st,stmpe-pwm";
|
|
#pwm-cells = <2>;
|
|
};
|
|
};
|
|
stmpe1: stmpe2401@44 {
|
|
compatible = "st,stmpe2401";
|
|
reg = <0x44>;
|
|
reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; // GPIO79
|
|
interrupts = <14 IRQ_TYPE_EDGE_FALLING>; // GPIO78
|
|
interrupt-parent = <&gpio2>;
|
|
interrupt-controller;
|
|
wakeup-source;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&stmpe2401_2_nhk_mode>;
|
|
stmpe_gpio44: stmpe_gpio {
|
|
compatible = "st,stmpe-gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
/*
|
|
* This will turn off SATA so that MMC/SD
|
|
* can thrive
|
|
*/
|
|
mmcsd-gpio {
|
|
gpio-hog;
|
|
gpios = <2 0x0>;
|
|
output-low;
|
|
line-name = "SATA EN";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
amba {
|
|
clcd@10120000 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&clcd_24bit_mux>;
|
|
port {
|
|
nomadik_clcd: endpoint {
|
|
remote-endpoint = <&nomadik_clcd_panel>;
|
|
arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
/* Activate RX/TX and CTS/RTS on UART 0 */
|
|
uart0: uart@101fd000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_nhk_mode>;
|
|
status = "okay";
|
|
};
|
|
mmcsd: sdi@101f6000 {
|
|
cd-gpios = <&stmpe_gpio44 7 GPIO_ACTIVE_LOW>;
|
|
wp-gpios = <&stmpe_gpio44 18 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
spi {
|
|
compatible = "spi-gpio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/*
|
|
* As we're dealing with 3wire SPI, we only define SCK
|
|
* and MOSI (in the spec MOSI is called "SDA").
|
|
*/
|
|
gpio-sck = <&gpio0 5 GPIO_ACTIVE_HIGH>;
|
|
gpio-mosi = <&gpio0 4 GPIO_ACTIVE_HIGH>;
|
|
cs-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
|
num-chipselects = <1>;
|
|
|
|
/*
|
|
* WVGA connector 21
|
|
* WVGA (800x480): 4.3" TPG110 TDO43MTEA2 24-bit RGB
|
|
* with TPO touch screen.
|
|
*/
|
|
panel: display@0 {
|
|
/*
|
|
* The TPO display driver is connected to a
|
|
* 5.7" OSD OSD057VA01CT TFT display.
|
|
*/
|
|
compatible = "tpo,tpg110";
|
|
reg = <0>;
|
|
spi-3wire;
|
|
/* 320 ns min period ~= 3 MHz */
|
|
spi-max-frequency = <3000000>;
|
|
/* Width and height from the OSD data sheet */
|
|
width-mm = <116>;
|
|
height-mm = <87>;
|
|
grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>;
|
|
backlight = <&bl>;
|
|
|
|
port {
|
|
nomadik_clcd_panel: endpoint {
|
|
remote-endpoint = <&nomadik_clcd>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
bl: backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&stmpe0_pwm 0 500000>;
|
|
pwm-names = "backlight";
|
|
brightness-levels = <
|
|
0 1 2 3 4 5 6 7 8 9
|
|
10 11 12 13 14 15 16 17 18 19
|
|
20 21 22 23 24 25 26 27 28 29
|
|
30 31 32 33 34 35 36 37 38 39
|
|
40 41 42 43 44 45 46 47 48 49
|
|
50 51 52 53 54 55 56 57 58 59
|
|
60 61 62 63 64 65 66 67 68 69
|
|
70 71 72 73 74 75 76 77 78 79
|
|
80 81 82 83 84 85 86 87 88 89
|
|
90 91 92 93 94 95 96 97 98 99
|
|
100
|
|
>;
|
|
default-brightness-level = <100>;
|
|
};
|
|
};
|