mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
4da722ca19
Pretty much any node can have a status property, so it doesn't need to be in examples. Converted with the following command and removed examples with SoC and board specific splits: git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d' Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
78 lines
3.1 KiB
Plaintext
78 lines
3.1 KiB
Plaintext
Device Tree Bindings for the Arasan SDHCI Controller
|
|
|
|
The bindings follow the mmc[1], clock[2], interrupt[3] and phy[4] bindings.
|
|
Only deviations are documented here.
|
|
|
|
[1] Documentation/devicetree/bindings/mmc/mmc.txt
|
|
[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
[3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
|
|
[4] Documentation/devicetree/bindings/phy/phy-bindings.txt
|
|
|
|
Required Properties:
|
|
- compatible: Compatibility string. One of:
|
|
- "arasan,sdhci-8.9a": generic Arasan SDHCI 8.9a PHY
|
|
- "arasan,sdhci-4.9a": generic Arasan SDHCI 4.9a PHY
|
|
- "arasan,sdhci-5.1": generic Arasan SDHCI 5.1 PHY
|
|
- "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1": rk3399 eMMC PHY
|
|
For this device it is strongly suggested to include arasan,soc-ctl-syscon.
|
|
- reg: From mmc bindings: Register location and length.
|
|
- clocks: From clock bindings: Handles to clock inputs.
|
|
- clock-names: From clock bindings: Tuple including "clk_xin" and "clk_ahb"
|
|
- interrupts: Interrupt specifier
|
|
- interrupt-parent: Phandle for the interrupt controller that services
|
|
interrupts for this device.
|
|
|
|
Required Properties for "arasan,sdhci-5.1":
|
|
- phys: From PHY bindings: Phandle for the Generic PHY for arasan.
|
|
- phy-names: MUST be "phy_arasan".
|
|
|
|
Optional Properties:
|
|
- arasan,soc-ctl-syscon: A phandle to a syscon device (see ../mfd/syscon.txt)
|
|
used to access core corecfg registers. Offsets of registers in this
|
|
syscon are determined based on the main compatible string for the device.
|
|
- clock-output-names: If specified, this will be the name of the card clock
|
|
which will be exposed by this device. Required if #clock-cells is
|
|
specified.
|
|
- #clock-cells: If specified this should be the value <0>. With this property
|
|
in place we will export a clock representing the Card Clock. This clock
|
|
is expected to be consumed by our PHY. You must also specify
|
|
- xlnx,fails-without-test-cd: when present, the controller doesn't work when
|
|
the CD line is not connected properly, and the line is not connected
|
|
properly. Test mode can be used to force the controller to function.
|
|
|
|
Example:
|
|
sdhci@e0100000 {
|
|
compatible = "arasan,sdhci-8.9a";
|
|
reg = <0xe0100000 0x1000>;
|
|
clock-names = "clk_xin", "clk_ahb";
|
|
clocks = <&clkc 21>, <&clkc 32>;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <0 24 4>;
|
|
} ;
|
|
|
|
sdhci@e2800000 {
|
|
compatible = "arasan,sdhci-5.1";
|
|
reg = <0xe2800000 0x1000>;
|
|
clock-names = "clk_xin", "clk_ahb";
|
|
clocks = <&cru 8>, <&cru 18>;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <0 24 4>;
|
|
phys = <&emmc_phy>;
|
|
phy-names = "phy_arasan";
|
|
} ;
|
|
|
|
sdhci: sdhci@fe330000 {
|
|
compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
|
|
reg = <0x0 0xfe330000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
|
|
clock-names = "clk_xin", "clk_ahb";
|
|
arasan,soc-ctl-syscon = <&grf>;
|
|
assigned-clocks = <&cru SCLK_EMMC>;
|
|
assigned-clock-rates = <200000000>;
|
|
clock-output-names = "emmc_cardclock";
|
|
phys = <&emmc_phy>;
|
|
phy-names = "phy_arasan";
|
|
#clock-cells = <0>;
|
|
};
|