mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
33eb46e1dc
This patch adds documentation of device tree bindings for the STM32 I2C controller. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
34 lines
1.1 KiB
Plaintext
34 lines
1.1 KiB
Plaintext
* I2C controller embedded in STMicroelectronics STM32 I2C platform
|
|
|
|
Required properties :
|
|
- compatible : Must be "st,stm32f4-i2c"
|
|
- reg : Offset and length of the register set for the device
|
|
- interrupts : Must contain the interrupt id for I2C event and then the
|
|
interrupt id for I2C error.
|
|
- resets: Must contain the phandle to the reset controller.
|
|
- clocks: Must contain the input clock of the I2C instance.
|
|
- A pinctrl state named "default" must be defined to set pins in mode of
|
|
operation for I2C transfer
|
|
- #address-cells = <1>;
|
|
- #size-cells = <0>;
|
|
|
|
Optional properties :
|
|
- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified,
|
|
the default 100 kHz frequency will be used. As only Normal and Fast modes
|
|
are supported, possible values are 100000 and 400000.
|
|
|
|
Example :
|
|
|
|
i2c@40005400 {
|
|
compatible = "st,stm32f4-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x40005400 0x400>;
|
|
interrupts = <31>,
|
|
<32>;
|
|
resets = <&rcc 277>;
|
|
clocks = <&rcc 0 149>;
|
|
pinctrl-0 = <&i2c1_sda_pin>, <&i2c1_scl_pin>;
|
|
pinctrl-names = "default";
|
|
};
|